Subversion Repositories w11

-- $Id: ib_sel.vhd 427 2011-11-19 21:04:11Z mueller $
--
-- Copyright 2010- by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
--
-- This program is free software; you may redistribute and/or modify it under
-- the terms of the GNU General Public License as published by the Free
-- Software Foundation, either version 2, or at your option any later version.
--
-- This program is distributed in the hope that it will be useful, but
-- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-- for complete details.
--
------------------------------------------------------------------------------
-- Module Name:    ib_sel - syn
-- Description:    ibus: address select logic
--
-- Dependencies:   -
-- Test bench:     tb/tb_pdp11_core (implicit)
-- Target Devices: generic
-- Tool versions:  xst 12.1; ghdl 0.29
--
-- Revision History: 
-- Date         Rev Version  Comment
-- 2010-10-23   335   1.0    Initial version (derived from rritb_sres_or_mon)
------------------------------------------------------------------------------
 
library ieee;
use ieee.std_logic_1164.all;
 
use work.slvtypes.all;
use work.iblib.all;
 
-- ----------------------------------------------------------------------------
 
entity ib_sel is                        -- ibus address select logic
  generic (
    IB_ADDR : slv16;                    -- ibus address base
    SAWIDTH : natural := 0);            -- device subaddress space width
  port (
    CLK : in slbit;                     -- clock
    IB_MREQ :  in ib_mreq_type;         -- ibus request
    SEL : out slbit                     -- select state bit
  );
end ib_sel;
 
architecture syn of ib_sel is
  signal R_SEL : slbit := '0';  
begin
 
  assert SAWIDTH<=10                    -- at most 1k words devices
    report "assert(SAWIDTH<=10)" severity failure;
 
  proc_regs: process (CLK)
    variable isel : slbit := '0';
  begin
    if rising_edge(CLK) then
      isel := '0';
      if IB_MREQ.aval='1' and
        IB_MREQ.addr(12 downto SAWIDTH+1)=IB_ADDR(12 downto SAWIDTH+1) then
        isel := '1';
      end if;
      R_SEL <= isel;
    end if;
  end process proc_regs;
 
  SEL <= R_SEL;
 
end syn;