Subversion Repositories w11

#!/usr/bin/perl -w
# $Id: create_disk 522 2013-05-24 17:50:29Z mueller $
#
# Copyright 2013- by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
#
# This program is free software; you may redistribute and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation, either version 2, or at your option any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for complete details.
#
#  Revision History:
# Date         Rev Version  Comment
# 2013-05-20   521   1.0    First draft
#

use 5.10.0;                                 # require Perl 5.10 or higher
use strict;                                 # require strict checking

use Getopt::Long;
use FileHandle;
use Fcntl qw(:seek);

my %opts = ();

GetOptions(\%opts, "help", "typ=s", "ini=s", "bad", "boot"
          )
  or exit 1;

sub do_inipatt;
sub do_badtable;
sub do_noboot;
sub print_help;

# disk type table
my %disktype = (
  RK05 => {cyl=> 203, hd=>   2, sec=>  12, bps=> 512, bad=>0},
  RL01 => {cyl=> 256, hd=>   2, sec=>  40, bps=> 256, bad=>1},
  RL02 => {cyl=> 512, hd=>   2, sec=>  40, bps=> 256, bad=>1},
  RP06 => {cyl=> 815, hd=>  19, sec=>  22, bps=> 512, bad=>1}
);

autoflush STDOUT 1 if (-p STDOUT);          # autoflush if output into pipe

if (exists $opts{help}) {
  print_help(1);
  exit 0;
}

if (scalar(@ARGV) != 1) {
  print STDERR "create_disk-E: specify one and only one output file\n";
  print_help(0);
  exit 1;
}

my $fnam = shift @ARGV;

if (-e $fnam) {
  print STDERR "create_disk-E: file '$fnam' exists already\n";
  exit 1;
}

my $typ = uc($opts{typ});
unless (defined $typ && exists $disktype{$typ}) {
  print STDERR "create_disk-E: no or invalid --typ specification, use --help\n";
  exit 1;
}

my $cyl = $disktype{$typ}{cyl};
my $hd  = $disktype{$typ}{hd};
my $sec = $disktype{$typ}{sec};
my $bps = $disktype{$typ}{bps};
my $bad = $disktype{$typ}{bad};

if ($opts{bad} && !$bad) {
  print STDERR "create_disk-E: --bad not supported for type '$typ', abort\n";
  exit 1;
}

my $nblk = $cyl*$hd*$sec;
my $cap  = $nblk * $bps;

my $fh = new FileHandle;
sysopen($fh, $fnam, O_RDWR|O_CREAT)
  or die "failed to create '$fnam': $!";

# seek to end, wrte 1 byte at end
my $rc = $fh->seek($cap-1, SEEK_SET);
if (not $rc) {die "seek failed: $!";}
my $buf = pack('C1',0);
$rc = syswrite($fh, $buf, length($buf));
if ($rc<=0) {die "write failed: $!";}

# handle init patterns
do_inipatt if $opts{ini};

# handle factory bad block table
do_badtable if $opts{bad};

# write dummy boot block
do_noboot if $opts{noboot};

#-------------------------------------------------------------------------------

sub do_inipatt {
  my $ini = $opts{ini};

  if ($ini eq 'zero' ||$ini eq 'ones' || $ini eq 'dead') {
    my @dat;
    for (my $i=0; $i<$bps/4; $i++) {
      push @dat, 0,0            if $ini eq 'zero';
      push @dat, -1,-1          if $ini eq 'ones';
      push @dat, 0xdead,0xbeaf  if $ini eq 'dead';
    }
    my $buf = pack('v*',@dat);
    my $rc = $fh->seek(0, SEEK_SET);
    if (not $rc) {die "seek failed: $!";}
    for (my $i=0; $i<$nblk; $i++) {
      $rc = syswrite($fh, $buf, length($buf));
      if ($rc<=0) {die "write failed: $!";}
    }

  } elsif ($ini eq 'test') {
    my $addr = 0;
    my $cur_sec = 0;
    my $cur_trk = 0;
    my $cur_cyl = 0;
    my $rc = $fh->seek(0, SEEK_SET);
    if (not $rc) {die "seek failed: $!";}
    for (my $i=0; $i<$nblk; $i++) {
      my @dat;
      for (my $i=0; $i<$bps/16; $i++) {
        push @dat, ($addr & 0xffff);
        push @dat, (($addr>>16) & 0xffff);
        push @dat, $cur_cyl, $cur_trk, $cur_sec;
        push @dat, $cyl, $hd, $sec;
        $addr += 16;
      }
      my $buf = pack('v*',@dat);
      $rc = syswrite($fh, $buf, length($buf));
      if ($rc<=0) {die "write failed: $!";}
      $cur_sec += 1;
      if ($cur_sec >= $sec) {
        $cur_sec = 0;
        $cur_trk += 1;
        if ($cur_trk >= $hd) {
          $cur_trk = 0;
          $cur_cyl += 1;
        }
      }
    }

  } else {
    print STDERR "create_disk-W: unknown --ini mode '$ini', --ini ignored\n";
  }
  return;
}

#-------------------------------------------------------------------------------

sub do_badtable {
  my @dat;
  push @dat, 012345, 012345;                # pack number
  push @dat, 0,0;                           # dummy c/s/h spec
  for (my $i=4; $i<$bps/2; $i++) {
    push @dat, -1;                          # end of table
  }
  my $buf = pack('v*',@dat);

  my $pos = $cap - $sec*$bps;               # position of last track
  my $rc = $fh->seek($pos, SEEK_SET);
  if (not $rc) {die "seek failed: $!";}
  my $nsec = ($sec > 10) ? 10 : $sec;       # write last track, at most 10 sec
  for (my $i=0; $i<$nsec; $i++) {
    $rc = syswrite($fh, $buf, length($buf));
    if ($rc<=0) {die "write failed: $!";}
  }
  return;
}

#-------------------------------------------------------------------------------

sub do_noboot {
  my @dat;

  push @dat, 0012700, 0000100;    #         start:  mov     #text, r0
  push @dat, 0105710;             #         1$:     tstb    (r0)
  push @dat, 0001406;             #                 beq     3$
  push @dat, 0105737, 0177564;    #         2$:     tstb    @#XCSR
  push @dat, 0100375;             #                 bpl     2$
  push @dat, 0112037, 0177566;    #                 movb    (r0)+,@#XBUF
  push @dat, 0000770;             #                 br      1$
  push @dat, 0000000;             #         3$:     halt

  my $buf = pack('v*',@dat);
  my $rc = $fh->seek(0, SEEK_SET);
  if (not $rc) {die "seek failed: $!";}
  $rc = syswrite($fh, $buf, length($buf));
  if ($rc<=0) {die "write failed: $!";}

  $buf  = "\r\n";
  $buf .= "\r\n";
  $buf .= "++======================================++\r\n";
  $buf .= "|| This is not a hardware bootable disk ||\r\n";
  $buf .= "++======================================++\r\n";
  $buf .= "\r\n";
  $buf .= "Disk image created with 'create_disk --typ=$typ':\r\n";
  $buf .= sprintf "  number of cylinders:     %6d\r\n", $cyl;
  $buf .= sprintf "  tracks per cylinder:     %6d\r\n", $hd;
  $buf .= sprintf "  sectors per track:       %6d\r\n", $sec;
  $buf .= sprintf "  block size:              %6d\r\n", $bps;
  $buf .= sprintf "  total number of sectors: %6d\r\n", $nblk;
  $buf .= sprintf "  capacity in kByte:       %6d\r\n", $cap/1024;
  $buf .= "\r\n";
  $buf .= "CPU WILL HALT\r\n";
  $buf .= "\r\n";

  # NOTE: the text above almost fills the first 512 bytes !!
  #       don't any more text, all has been said anyway   !!

  $rc = $fh->seek(0100, SEEK_SET);
  if (not $rc) {die "seek failed: $!";}
  $rc = syswrite($fh, $buf, length($buf));
  if ($rc<=0) {die "write failed: $!";}

  return;
}

#-------------------------------------------------------------------------------

sub print_help {
  my ($ptyp) = @_;
  print "usage: create_disk [options] <file>\n";
  print "  --typ=<type>  specified disk type, must be specified\n";
  print "  --ini=<pat>   initialization pattern, can be\n";
  print "  --bad         create factory bad block table on last track\n";
  print "  --boot        write dummy boot block, print volume info and HALT\n";
  print "  --help        print full help, with list --typ and --ini options\n";
  return unless $ptyp;

  print "\n";
  print "currently supported disk types:\n";
  print "  type #cyl #trk #sec  bps tot_sec  blocks  -bad\n";
  foreach my $typ (sort keys %disktype) {
    my $cyl = $disktype{$typ}{cyl};
    my $hd  = $disktype{$typ}{hd};
    my $sec = $disktype{$typ}{sec};
    my $bps = $disktype{$typ}{bps};
    printf "  %4s %4d %4d %4d %4d %7d %7d   %3s\n",
      $typ, $cyl, $hd, $sec, $bps,
      ($cyl*$hd*$sec), ($cyl*$hd*$sec*$bps)/1024,
      ($disktype{$typ}{bad} ? 'yes' : ' no');
  }

  print "\n";
  print "currently supported initialization patterns:\n";
  print "  zero  all zero (the default anyway if no -ini given)\n";
  print "  ones  all ones\n";
  print "  dead  alternating 0xdead 0xbeaf pattern\n";
  print "  test  writes unique groups of 8 16bit words\n";
  print "\n";
  print "For further details consults the create_disk man page.\n";
  return;
}