Subversion Repositories w11

; $Id: setup_w11a_min.scmd 559 2014-06-06 21:26:47Z mueller $
;
; Setup file for 'minimal' w11a configuration under simh 3.8 and above
;
; This setup reflects the minimal w11a system on a S3BOARD
;   --> 1MByte, 2 DL11, LP+PC, RK05
;
; 11/70 CPU no FPP, 1 MByte memory
; 2 DL11
; 0 DZ11
; 1 LP11
; 1 PC11
; 1 RK11 + 8 RK05    drives
; 0 RL11 + 0 RL01/02 drives
; 0 RH70 + 0 RP06    drives
; 0 TM11 + 0 drives
; 0 DEUNA
;
; processor options
;
set cpu 11/70
set cpu nofpp
set cpu 1m
set cpu oct
set cpu idle
;
; clock options
;
set clk  50hz
;
; terminal interface options
;   the default tti time=0 setting gives 50 chars/sec, slow
;   setting time=50000 (means 1 char every 50000 instructions) is much
;   faster and seems still save for old DEC OS like XXDP, RT-11, RXS11-M
;
set cons log=simh_dl0.log
dep tti time 50000
set tto 8b
;
; 2nd DL11 interface options
;   Note: set dli  vector=300 not allowed, rely on autoconf to set vec->300
;   Note: default for DLO's is UC ! -> set to 8bit
;
set dli  enabled
set dli  lines=1
att dli  5670
set dlo0 log=simh_dl1.log
set dlo0 8b
;
; line printer
;
set lpt  enabled
att lpt  simh_lpt.dat
;
; paper tape read/punch
;
set ptr  enabled
set ptp  enabled
att ptp  simh_ptp.dat
;
; disk drives
;
set rk  enabled
;
; tape drives (none)
; ethernet interfaces (none)
;
; DISABLE all else
;
set dz   disabled
set rl  disabled
set rha disabled
set rp  disabled
set tm  disabled
set xu  disabled
;
set cr  disabled
set vh  disabled
set hk  disabled
set rx  disabled
set rq  disabled
set tq  disabled
;
;sho conf
;