OpenCores
URL https://opencores.org/ocsvn/8051/8051/trunk

Subversion Repositories 8051

[/] [8051/] [trunk/] [rtl/] [verilog/] [oc8051_uart.v] - Rev 119

Go to most recent revision | Compare with Previous | Blame | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  8051 cores serial interface                                 ////
////                                                              ////
////  This file is part of the 8051 cores project                 ////
////  http://www.opencores.org/cores/8051/                        ////
////                                                              ////
////  Description                                                 ////
////   uart for 8051 core                                         ////
////                                                              ////
////  To Do:                                                      ////
////   Nothing                                                    ////
////                                                              ////
////  Author(s):                                                  ////
////      - Simon Teran, simont@opencores.org                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.12  2003/04/07 14:58:02  simont
// change sfr's interface.
//
// Revision 1.11  2003/04/07 13:29:16  simont
// change uart to meet timing.
//
// Revision 1.10  2003/01/13 14:14:41  simont
// replace some modules
//
// Revision 1.9  2002/09/30 17:33:59  simont
// prepared header
//
//
 
// synopsys translate_off
`include "oc8051_timescale.v"
// synopsys translate_on
 
`include "oc8051_defines.v"
 
module oc8051_uart (rst, clk, 
             bit_in, data_in,
	     wr_addr,
	     wr, wr_bit,
             rxd, txd,
	     intr,
             brate2, t1_ow, pres_ow,
	     rclk, tclk,
//registers
	     scon, pcon, sbuf);
 
input        rst,
             clk,
	     bit_in,
	     wr,
	     rxd,
	     wr_bit,
	     t1_ow,
	     brate2,
	     pres_ow,
	     rclk,
	     tclk;
input [7:0]  data_in,
	     wr_addr;
 
output       txd,
             intr;
output [7:0] scon,
             pcon,
	     sbuf;
 
 
reg t1_ow_buf;
//
reg [7:0] scon, pcon;
 
 
reg        txd,
           trans,
           receive,
           tx_done,
	   rx_done,
	   rxd_r,
	   shift_tr,
	   shift_re;
reg [1:0]  rx_sam;
reg [3:0]  tr_count,
           re_count;
reg [7:0]  sbuf_rxd;
reg [11:0] sbuf_rxd_tmp;
reg [10:0] sbuf_txd;
 
assign sbuf = sbuf_rxd;
assign intr = scon[1] | scon [0];
 
//
//serial port control register
//
wire ren, tb8, rb8, ri;
assign ren = scon[4];
assign tb8 = scon[3];
assign rb8 = scon[2];
assign ri  = scon[0];
 
always @(posedge clk or posedge rst)
begin
  if (rst)
    scon <= #1 `OC8051_RST_SCON;
  else if ((wr) & !(wr_bit) & (wr_addr==`OC8051_SFR_SCON))
    scon <= #1 data_in;
  else if ((wr) & (wr_bit) & (wr_addr[7:3]==`OC8051_SFR_B_SCON))
    scon[wr_addr[2:0]] <= #1 bit_in;
  else if (tx_done)
    scon[1] <= #1 1'b1;
  else if (!rx_done) begin
    if (scon[7:6]==2'b00) begin
      scon[0] <= #1 1'b1;
    end else if ((sbuf_rxd_tmp[11]) | !(scon[5])) begin
      scon[0] <= #1 1'b1;
      scon[2] <= #1 sbuf_rxd_tmp[11];
    end else
      scon[2] <= #1 sbuf_rxd_tmp[11];
  end
end
 
//
//power control register
//
wire smod;
assign smod = pcon[7];
always @(posedge clk or posedge rst)
begin
  if (rst)
  begin
    pcon <= #1 `OC8051_RST_PCON;
  end else if ((wr_addr==`OC8051_SFR_PCON) & (wr) & !(wr_bit))
    pcon <= #1 data_in;
end
 
 
//
//serial port buffer (transmit)
//
 
wire wr_sbuf;
assign wr_sbuf = (wr_addr==`OC8051_SFR_SBUF) & (wr) & !(wr_bit);
 
always @(posedge clk or posedge rst)
begin
  if (rst) begin
    txd      <= #1 1'b1;
    tr_count <= #1 4'd0;
    trans    <= #1 1'b0;
    sbuf_txd <= #1 11'h00;
    tx_done  <= #1 1'b0;
//
// start transmiting
//
  end else if (wr_sbuf) begin
    case (scon[7:6])
      2'b00: begin  // mode 0
        sbuf_txd <= #1 {3'b001, data_in};
      end
      2'b01: begin // mode 1
        sbuf_txd <= #1 {2'b01, data_in, 1'b0};
      end
      default: begin  // mode 2 and mode 3
        sbuf_txd <= #1 {1'b1, tb8, data_in, 1'b0};
      end
    endcase
    trans    <= #1 1'b1;
    tr_count <= #1 4'd0;
    tx_done  <= #1 1'b0;
//
// transmiting
//
  end else if (trans & (scon[7:6] == 2'b00) & pres_ow) // mode 0
  begin
    if (~|sbuf_txd[10:1]) begin
      trans   <= #1 1'b0;
      tx_done <= #1 1'b1;
    end else begin
      {sbuf_txd, txd} <= #1 {1'b0, sbuf_txd};
      tx_done         <= #1 1'b0;
    end
  end else if (trans & (scon[7:6] != 2'b00) & shift_tr) begin // mode 1, 2, 3
    tr_count <= #1 tr_count + 4'd1;
    if (~|tr_count) begin
      if (~|sbuf_txd[10:0]) begin
        trans   <= #1 1'b0;
        tx_done <= #1 1'b1;
        txd <= #1 1'b1;
      end else begin
        {sbuf_txd, txd} <= #1 {1'b0, sbuf_txd};
        tx_done         <= #1 1'b0;
      end
    end
  end else if (!trans) begin
    txd     <= #1 1'b1;
    tx_done <= #1 1'b0;
  end
end
 
//
//
reg sc_clk_tr, smod_clk_tr;
always @(brate2 or t1_ow or t1_ow_buf or scon[7:6] or tclk)
begin
  if (scon[7:6]==8'b10) begin //mode 2
    sc_clk_tr = 1'b1;
  end else if (tclk) begin //
    sc_clk_tr = brate2;
  end else begin //
    sc_clk_tr = !t1_ow_buf & t1_ow;
  end
end
 
always @(posedge clk or posedge rst)
begin
  if (rst) begin
    smod_clk_tr <= #1 1'b0;
    shift_tr    <= #1 1'b0;
  end else if (sc_clk_tr) begin
    if (smod) begin
      shift_tr <= #1 1'b1;
    end else begin
      shift_tr    <= #1  smod_clk_tr;
      smod_clk_tr <= #1 !smod_clk_tr;
    end
  end else begin
    shift_tr <= #1 1'b0;
  end
end
 
 
//
//serial port buffer (receive)
//
always @(posedge clk or posedge rst)
begin
  if (rst) begin
    re_count     <= #1 4'd0;
    receive      <= #1 1'b0;
    sbuf_rxd     <= #1 8'h00;
    sbuf_rxd_tmp <= #1 12'd0;
    rx_done      <= #1 1'b1;
    rxd_r        <= #1 1'b1;
    rx_sam       <= #1 2'b00;
  end else if (!rx_done) begin
    receive <= #1 1'b0;
    rx_done <= #1 1'b1;
    sbuf_rxd <= #1 sbuf_rxd_tmp[10:3];
  end else if (receive & (scon[7:6]==2'b00) & pres_ow) begin //mode 0
    {sbuf_rxd_tmp, rx_done} <= #1 {rxd, sbuf_rxd_tmp};
  end else if (receive & (scon[7:6]!=2'b00) & shift_re) begin //mode 1, 2, 3
    re_count <= #1 re_count + 4'd1;
    case (re_count)
      4'h7: rx_sam[0] <= #1 rxd;
      4'h8: rx_sam[1] <= #1 rxd;
      4'h9: begin
        {sbuf_rxd_tmp, rx_done} <= #1 {(rxd==rx_sam[0] ? rxd : rx_sam[1]), sbuf_rxd_tmp};
      end
    endcase
//
//start receiving
//
  end else if (scon[7:6]==2'b00) begin //start mode 0
    rx_done <= #1 1'b1;
    if (ren && !ri && !receive) begin
      receive      <= #1 1'b1;
      sbuf_rxd_tmp <= #1 10'h0ff;
    end
  end else if (ren & shift_re) begin
    rxd_r <= #1 rxd;
    rx_done <= #1 1'b1;
    re_count <= #1 4'h0;
    receive <= #1 (rxd_r & !rxd);
    sbuf_rxd_tmp <= #1 10'h1ff;
  end else
    rx_done <= #1 1'b1;
end
 
//
//
reg sc_clk_re, smod_clk_re;
always @(brate2 or t1_ow or t1_ow_buf or scon[7:6] or rclk)
begin
  if (scon[7:6]==8'b10) begin //mode 2
    sc_clk_re = 1'b1;
  end else if (rclk) begin //
    sc_clk_re = brate2;
  end else begin //
    sc_clk_re = !t1_ow_buf & t1_ow;
  end
end
 
always @(posedge clk or posedge rst)
begin
  if (rst) begin
    smod_clk_re <= #1 1'b0;
    shift_re    <= #1 1'b0;
  end else if (sc_clk_re) begin
    if (smod) begin
      shift_re <= #1 1'b1;
    end else begin
      shift_re    <= #1  smod_clk_re;
      smod_clk_re <= #1 !smod_clk_re;
    end
  end else begin
    shift_re <= #1 1'b0;
  end
end
 
 
 
//
//
//
 
always @(posedge clk or posedge rst)
begin
  if (rst) begin
    t1_ow_buf <= #1 1'b0;
  end else begin
    t1_ow_buf <= #1 t1_ow;
  end
end
 
 
 
endmodule
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.