URL
https://opencores.org/ocsvn/an-fpga-implementation-of-low-latency-noc-based-mpsoc/an-fpga-implementation-of-low-latency-noc-based-mpsoc/trunk
Subversion Repositories an-fpga-implementation-of-low-latency-noc-based-mpsoc
[/] [an-fpga-implementation-of-low-latency-noc-based-mpsoc/] [trunk/] [mpsoc/] [perl_gui/] [lib/] [ip/] [Source/] [xilinx_pll.IP] - Rev 48
Compare with Previous | Blame | View Log
######################################################################### File: xilinx_pll.IP#### Copyright (C) 2014-2019 Alireza Monemi#### This file is part of ProNoC 1.9.1#### WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT## MAY CAUSE UNEXPECTED BEHAIVOR.################################################################################$ipgen = bless( {'plugs' => {'clk' => {'0' => {'name' => 'clk_in'},'type' => 'num','value' => 1},'reset' => {'value' => 1,'0' => {'name' => 'reset_in'},'type' => 'num'}},'sockets' => {'reset' => {'connection_num' => 'multi connection','type' => 'num','0' => {'name' => 'reset'},'1' => {'name' => 'reset_1'},'value' => 1},'clk' => {'1' => {'name' => 'clk_1'},'3' => {'name' => 'clk_3'},'value' => 'CLKOUT_NUM','5' => {'name' => 'clk_5'},'type' => 'param','connection_num' => 'multi connection','0' => {'name' => 'clk'},'2' => {'name' => 'clk_2'},'4' => {'name' => 'clk_4'}}},'category' => 'Source','parameters_order' => ['CLKOUT_NUM','BANDWIDTH','CLKFBOUT_MULT','CLKFBOUT_PHASE','CLKIN1_PERIOD','CLKOUT0_DIVIDE','CLKOUT1_DIVIDE','CLKOUT2_DIVIDE','CLKOUT3_DIVIDE','CLKOUT4_DIVIDE','CLKOUT5_DIVIDE','CLKOUT0_DUTY_CYCLE','CLKOUT1_DUTY_CYCLE','CLKOUT2_DUTY_CYCLE','CLKOUT3_DUTY_CYCLE','CLKOUT4_DUTY_CYCLE','CLKOUT5_DUTY_CYCLE','CLKOUT0_PHASE','CLKOUT1_PHASE','CLKOUT2_PHASE','CLKOUT3_PHASE','CLKOUT4_PHASE','CLKOUT5_PHASE','DIVCLK_DIVIDE','REF_JITTER1','STARTUP_WAIT'],'modules' => {'xilinx_pll2_base' => {}},'gui_status' => {'timeout' => 0,'status' => 'ideal'},'ports_order' => ['clk_out','reset_out','clk_in','reset_in'],'parameters' => {'CLKOUT1_DIVIDE' => {'info' => 'Divide amount for CLKOUT1 (1-128)','global_param' => 'Localparam','redefine_param' => 1,'type' => 'Spin-button','content' => '1,128,1','default' => '1'},'CLKOUT4_DIVIDE' => {'type' => 'Spin-button','content' => '1,128,1','redefine_param' => 1,'global_param' => 'Localparam','info' => 'Divide amount for CLKOUT4 (1-128)','default' => '1'},'CLKOUT2_DUTY_CYCLE' => {'global_param' => 'Localparam','info' => ' Duty cycle for CLKOUT2 (0.001-0.999).','content' => '0.001,0.999,0.001','type' => 'Spin-button','redefine_param' => 1,'default' => '0.5'},'CLKIN1_PERIOD' => {'default' => '0.0','global_param' => 'Localparam','info' => 'Input clock period in ns to ps resolution (i.e. 33.333 is 30 MHz).','content' => '0,1000,0.001','type' => 'Spin-button','redefine_param' => 1},'CLKOUT4_PHASE' => {'type' => 'Spin-button','content' => '-360.000,360.000,0.001','redefine_param' => 1,'info' => 'Phase offset for each CLKOUT4 (-360.000-360.000).','global_param' => 'Localparam','default' => '0.0'},'CLKOUT2_PHASE' => {'global_param' => 'Localparam','info' => 'Phase offset for each CLKOUT2 (-360.000-360.000).','redefine_param' => 1,'type' => 'Spin-button','content' => '-360.000,360.000,0.001','default' => '0.0'},'CLKOUT_NUM' => {'global_param' => 'Localparam','info' => 'Number of out put clk sources','redefine_param' => 1,'content' => '1,2,3,4,5,6','type' => 'Combo-box','default' => '1'},'CLKOUT3_DUTY_CYCLE' => {'info' => ' Duty cycle for CLKOUT3 (0.001-0.999).','global_param' => 'Localparam','redefine_param' => 1,'type' => 'Spin-button','content' => '0.001,0.999,0.001','default' => '0.5'},'CLKOUT4_DUTY_CYCLE' => {'redefine_param' => 1,'type' => 'Spin-button','content' => '0.001,0.999,0.001','global_param' => 'Localparam','info' => ' Duty cycle for CLKOUT4 (0.001-0.999).','default' => '0.5'},'CLKOUT2_DIVIDE' => {'default' => '1','redefine_param' => 1,'content' => '1,128,1','type' => 'Spin-button','global_param' => 'Localparam','info' => 'Divide amount for CLKOUT2 (1-128)'},'CLKOUT0_PHASE' => {'redefine_param' => 1,'type' => 'Spin-button','content' => '-360.000,360.000,0.001','global_param' => 'Localparam','info' => 'Phase offset for each CLKOUT0 (-360.000-360.000).','default' => '0.0'},'CLKFBOUT_MULT' => {'default' => '5','type' => 'Spin-button','content' => '2,64,1','redefine_param' => 1,'info' => 'Multiply value for all CLKOUT','global_param' => 'Localparam'},'CLKOUT0_DIVIDE' => {'default' => '1','global_param' => 'Localparam','info' => 'Divide amount for CLKOUT0 (1-128)','redefine_param' => 1,'content' => '1,128,1','type' => 'Spin-button'},'CLKOUT0_DUTY_CYCLE' => {'default' => '0.5','type' => 'Spin-button','content' => '0.001,0.999,0.001','redefine_param' => 1,'info' => ' Duty cycle for CLKOUT0 (0.001-0.999).','global_param' => 'Localparam'},'CLKOUT3_PHASE' => {'default' => '0.0','content' => '-360.000,360.000,0.001','type' => 'Spin-button','redefine_param' => 1,'info' => 'Phase offset for each CLKOUT3 (-360.000-360.000).','global_param' => 'Localparam'},'CLKOUT5_DIVIDE' => {'default' => '1','info' => 'Divide amount for CLKOUT5 (1-128)','global_param' => 'Localparam','redefine_param' => 1,'type' => 'Spin-button','content' => '1,128,1'},'CLKOUT1_PHASE' => {'global_param' => 'Localparam','info' => 'Phase offset for each CLKOUT1 (-360.000-360.000).','content' => '-360.000,360.000,0.001','type' => 'Spin-button','redefine_param' => 1,'default' => '0.0'},'BANDWIDTH' => {'default' => '"OPTIMIZED"','redefine_param' => 1,'type' => 'Combo-box','content' => '"OPTIMIZED","HIGH","LOW"','info' => '','global_param' => 'Localparam'},'CLKFBOUT_PHASE' => {'info' => 'Phase offset in degrees of CLKFB, (-360.000-360.000).','global_param' => 'Localparam','redefine_param' => 1,'type' => 'Spin-button','content' => '-360.000,360.000,0.001','default' => '0.0'},'DIVCLK_DIVIDE' => {'redefine_param' => 1,'content' => '1,56,1','type' => 'Spin-button','global_param' => 'Localparam','info' => 'Master division value, (1-56)','default' => '1'},'STARTUP_WAIT' => {'default' => '"FALSE"','global_param' => 'Localparam','info' => 'Delay DONE until PLL Locks, ("TRUE"/"FALSE")','redefine_param' => 1,'type' => 'Fixed','content' => '"TRUE","FALSE"'},'CLKOUT5_PHASE' => {'redefine_param' => 1,'content' => '-360.000,360.000,0.001','type' => 'Spin-button','info' => 'Phase offset for each CLKOUT5 (-360.000-360.000).','global_param' => 'Localparam','default' => '0.0'},'CLKOUT5_DUTY_CYCLE' => {'redefine_param' => 1,'content' => '0.001,0.999,0.001','type' => 'Spin-button','info' => ' Duty cycle for CLKOUT5 (0.001-0.999).','global_param' => 'Localparam','default' => '0.5'},'CLKOUT1_DUTY_CYCLE' => {'default' => '0.5','global_param' => 'Localparam','info' => ' Duty cycle for CLKOUT1 (0.001-0.999).','type' => 'Spin-button','content' => '0.001,0.999,0.001','redefine_param' => 1},'REF_JITTER1' => {'default' => '0.0','redefine_param' => 1,'type' => 'Spin-button','content' => '0.000,0.999,0.001','global_param' => 'Localparam','info' => 'Reference input jitter in UI, (0.000-0.999).'},'CLKOUT3_DIVIDE' => {'info' => 'Divide amount for CLKOUT3 (1-128)','global_param' => 'Localparam','content' => '1,128,1','type' => 'Spin-button','redefine_param' => 1,'default' => '1'}},'unused' => undef,'description' => 'PLLE2_BASE','module_name' => 'xilinx_pll2_base','version' => 17,'file_name' => 'mpsoc/rtl/src_peripheral/clk_source/xilinx_pll/xilinx_pll2_base.v','hdl_files_ticked' => ['/mpsoc/rtl/src_peripheral/clk_source/xilinx_pll/xilinx_pll_sim'],'ip_name' => 'xilinx_pll','hdl_files' => ['/mpsoc/rtl/src_peripheral/clk_source/xilinx_pll/xilinx_pll2_base.v','/mpsoc/rtl/src_peripheral/clk_source/xilinx_pll/xilinx_pll_sim'],'ports' => {'reset_in' => {'range' => '','intfc_port' => 'reset_i','intfc_name' => 'plug:reset[0]','type' => 'input'},'clk_in' => {'intfc_port' => 'clk_i','intfc_name' => 'plug:clk[0]','range' => '','type' => 'input'},'reset_out' => {'type' => 'output','range' => '','intfc_name' => 'socket:reset[0]','intfc_port' => 'reset_o'},'clk_out' => {'range' => 'CLKOUT_NUM-1: 0','intfc_port' => 'clk_o','intfc_name' => 'socket:clk[array]','type' => 'output'}}}, 'ip_gen' );