URL https://opencores.org/ocsvn/an-fpga-implementation-of-low-latency-noc-based-mpsoc/an-fpga-implementation-of-low-latency-noc-based-mpsoc/trunk

Subversion Repositories an-fpga-implementation-of-low-latency-noc-based-mpsoc

[/] [an-fpga-implementation-of-low-latency-noc-based-mpsoc/] [trunk/] [mpsoc/] [rtl/] [src_peripheral/] [jtag/] [jtag_simulation/] [jtag_wb_test/] [ReadMe] - Rev 48

Compare with Previous | Blame | View Log



Generate jtag_sim_input.v file
1- uncomment #define PRINT_TO_XSCT in
/mpsoc/src_c/jtag/jtag_xilinx_xsct/jtag.c 
2- run makefile in src_c
3- connect your FPGA-board to usb port
4- run program.sh in target SoC folder 
5- It generate a file called to_xsct.txt. Copy this file in mpsoc/src_c/jtag/test_rtl/jtag_sim_pattern and run ./main
6- Replace the jtag_sim_input.v file in mpsoc/src_peripheral/jtag/jtag_simulation/src_verilog folder  add 

7- in Target SoC/MpSoC folder create a folder called src_sim (next to src_verilog folder)
8- in  copy altera.v  BSCANE2_sim.v  jtag_sim_input.v files from mpsoc/src_peripheral/jtag/jtag_simulation/src_verilog to src_sim
9- add following lines to run.tcl in target_soc/modelsim/run.tcl file
vlog -vlog01compat -work work +incdir+/home/alireza/work/hca_git/mpsoc_work/SOC/mor1k_soc/src_sim/ {/home/alireza/work/hca_git/mpsoc_work/SOC/mor1k_soc/src_sim/altera.v} 
vlog -vlog01compat -work work +incdir+/home/alireza/work/hca_git/mpsoc_work/SOC/mor1k_soc/src_sim/ {/home/alireza/work/hca_git/mpsoc_work/SOC/mor1k_soc/src_sim/BSCANE2_sim.v}

Compare with Previous | Blame | View Log

Browse

Tools

Subversion Repositories an-fpga-implementation-of-low-latency-noc-based-mpsoc

[/] [an-fpga-implementation-of-low-latency-noc-based-mpsoc/] [trunk/] [mpsoc/] [rtl/] [src_peripheral/] [jtag/] [jtag_simulation/] [jtag_wb_test/] [ReadMe] - Rev 48