Subversion Repositories openhmc

/*
 *                              .--------------. .----------------. .------------.
 *                             | .------------. | .--------------. | .----------. |
 *                             | | ____  ____ | | | ____    ____ | | |   ______ | |
 *                             | ||_   ||   _|| | ||_   \  /   _|| | | .' ___  || |
 *       ___  _ __   ___ _ __  | |  | |__| |  | | |  |   \/   |  | | |/ .'   \_|| |
 *      / _ \| '_ \ / _ \ '_ \ | |  |  __  |  | | |  | |\  /| |  | | || |       | |
 *       (_) | |_) |  __/ | | || | _| |  | |_ | | | _| |_\/_| |_ | | |\ `.___.'\| |
 *      \___/| .__/ \___|_| |_|| ||____||____|| | ||_____||_____|| | | `._____.'| |
 *           | |               | |            | | |              | | |          | |
 *           |_|               | '------------' | '--------------' | '----------' |
 *                              '--------------' '----------------' '------------'
 *
 *  openHMC - An Open Source Hybrid Memory Cube Controller
 *  (C) Copyright 2014 Computer Architecture Group - University of Heidelberg
 *  www.ziti.uni-heidelberg.de
 *  B6, 26
 *  68159 Mannheim
 *  Germany
 *
 *  Contact: openhmc@ziti.uni-heidelberg.de
 *  http://ra.ziti.uni-heidelberg.de/openhmc
 *
 *   This source file is free software: you can redistribute it and/or modify
 *   it under the terms of the GNU Lesser General Public License as published by
 *   the Free Software Foundation, either version 3 of the License, or
 *   (at your option) any later version.
 *
 *   This source file is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public License
 *   along with this source file.  If not, see <http://www.gnu.org/licenses/>.
 *
 *
 *  Module name: openhmc_sync_fifo
 *
 */
 
`default_nettype none
 
module openhmc_sync_fifo #(
`ifdef CAG_ASSERTIONS
        parameter DISABLE_EMPTY_ASSERT      = 0,
        parameter DISABLE_SHIFT_OUT_ASSERT  = 0,
        parameter DISABLE_XCHECK_ASSERT     = 0,
`endif
        parameter DATASIZE                  = 8,
        parameter ADDRSIZE                  = 8
    ) (
        //----------------------------------
        //----SYSTEM INTERFACE
        //----------------------------------
        input wire                  clk,
        input wire                  res_n,
 
        //----------------------------------
        //----Signals
        //----------------------------------
        input wire [DATASIZE-1:0]   d_in,
        input wire                  shift_in,
        input wire                  shift_out,
        output wire [DATASIZE-1:0]  d_out,
        output wire                 empty
    );
 
//=====================================================================================================
//-----------------------------------------------------------------------------------------------------
//---------WIRING AND SIGNAL STUFF---------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------
//=====================================================================================================
 
wire si, so;    // internal gated shift signals
reg full_r1, full_r2;
wire full_1, full_2, full_3;
reg full_m2, full_m1;
 
reg [DATASIZE-1:0] d_out_r1, d_out_r2;
wire [DATASIZE-1:0] d_out_m2, d_out_2, d_out_3;
wire mux_rm_2;
 
reg [ADDRSIZE -1:0] ra_m, wa_m; //addr after register similar to signal internal to sram
reg [ADDRSIZE -1:0] ra, wa; // address calculated for the next read
wire wen, ren;
 
wire m_empty;
 
assign full_1 = full_r1 || full_m1 || (full_m2 && full_r2);
assign full_2 = full_r2 || full_m2;
 
//=====================================================================================================
//-----------------------------------------------------------------------------------------------------
//---------LOGIC STARTS HERE---------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------
//=====================================================================================================
 
always @ (posedge clk or negedge res_n) begin
    if (!res_n) begin
        d_out_r1 <= {DATASIZE {1'b0}};
        d_out_r2 <= {DATASIZE {1'b0}};
        full_r1 <= 1'b0;
        full_r2 <= 1'b0;
    end else begin
 
        // Register stage 1 (conditions shouldn't overlap)
        if ((full_2 && !full_1 && si && !so) ||         // fill stage
            (full_1 && m_empty && si && so)) begin      // shift through
            d_out_r1 <= d_in;
            full_r1 <= 1'b1;
        end
        if (full_r1 && so && (!si || !m_empty)) begin   // shift out
            full_r1 <= 1'b0;
        end
 
        // Register stage 2 (conditions shouldn't overlap)
        if (full_3 && ((!full_2 && si && !so) ||        // fill stage
                (full_2 && !full_1 && si && so))) begin // shift through
            d_out_r2 <= d_in;
            full_r2 <= 1'b1;
        end
        if (full_r1 && so) begin                        // shift through
            d_out_r2 <= d_out_r1;
            full_r2 <= 1'b1;
        end
        if (full_m2 && ((!full_r2 && !so) ||            // Rescue
                        (full_r2 && so))) begin
            d_out_r2 <= d_out_m2;
            full_r2 <= 1'b1;
        end
        if (full_r2 &&
                ((!full_r1 && !full_m2 && so && !si) || // shift out
                (full_m1 && si && so))) begin           // shift through with RAM
            full_r2 <= 1'b0;
        end
    end
end
 
// assign outputs and inputs to module interface
    assign d_out = d_out_3;
 
    assign empty = !full_3; // if the last stage is empty, the fifo is empty
 
    assign si = shift_in;
    assign so = shift_out;
 
    wire [ADDRSIZE:0] fifo_ram_count = wa_m - ra_m;
 
    assign mux_rm_2 = full_r2;          // mux control of SRAM data bypass if only one value in stage r2
    assign d_out_2 = mux_rm_2 ? d_out_r2 : d_out_m2;    // additional data mux for SRAM bypass
 
    // write port control of SRAM
    assign wen = si && !so && full_1    // enter new value into SRAM, because regs are filled
                || si && !m_empty;  // if a value is in the SRAM, then we have to shift through or shift in
 
    // read port control of SRAM
    assign ren = so && !m_empty;
 
    assign m_empty = (wa_m == ra_m);
 
    always @ (posedge clk or negedge res_n) begin
        if (!res_n) begin
            full_m1 <= 1'b0;
            full_m2 <= 1'b0;
        end else begin
            full_m1 <= ren; // no control of m1
            full_m2 <= full_m1
                    || full_m2 && !so && full_r2;       // no rescue possible
        end
    end
 
// pointer management
    always @(*) begin
        wa = wa_m + 1'b1; // wa_m is the address stored in mem addr register
        ra = ra_m + 1'b1;
    end
 
    always @ (posedge clk or negedge res_n) begin
        if (!res_n) begin
            wa_m <= {ADDRSIZE {1'b0}};
            ra_m <= {ADDRSIZE {1'b0}};
        end else begin
            if (wen) begin
                wa_m <= wa; // next mem write addr to mem addr register
            end
 
            if (ren) begin
                ra_m <= ra;
            end
        end
    end
 
//=====================================================================================================
//-----------------------------------------------------------------------------------------------------
//---------INSTANTIATIONS HERE-------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------
//=====================================================================================================
openhmc_sync_fifo_reg_stage #(.DWIDTH(DATASIZE))
    sync_fifo_reg_stage_3_I (
        .clk(clk),
        .res_n(res_n),
        .d_in(d_in),
        .d_in_p(d_out_2),
        .p_full(full_2),
        .n_full(1'b1),
        .si(si),
        .so(so),
        .full(full_3),
        .d_out(d_out_3)
    );
 
openhmc_ram #(
    .DATASIZE(DATASIZE),    // Memory data word width
    .ADDRSIZE(ADDRSIZE),    // Number of memory address bits
    .PIPELINED(1)
    )
    ram(
        .clk(clk),
        .wen(wen),
        .wdata(d_in),
        .waddr(wa),
        .ren(ren),
        .raddr(ra),
        .rdata(d_out_m2)
        );
 
 
`ifdef CAG_ASSERTIONS
 
    if (DISABLE_SHIFT_OUT_ASSERT == 0)
        shift_out_and_empty:    assert property (@(posedge clk) disable iff(!res_n) (shift_out |-> !empty));
 
    if (DISABLE_XCHECK_ASSERT == 0)
    dout_known:                 assert property (@(posedge clk) disable iff(!res_n) (!empty |-> !$isunknown(d_out)));
 
    final
    begin
        if (DISABLE_EMPTY_ASSERT == 0)
        begin
            empty_not_set_assert:           assert (empty);
        end
    end
 
`endif // CAG_ASSERTIONS
 
endmodule
 
`default_nettype wire