OpenCores
URL https://opencores.org/ocsvn/socgen/socgen/trunk

Subversion Repositories socgen

[/] [socgen/] [trunk/] [Projects/] [opencores.org/] [fpgas/] [ip/] [Nexys2_T6502/] [syn/] [ise/] [Nexys2_T6502_kim_2/] [target/] [bsdl/] [xc3s1200e_fg320_1532.bsd] - Rev 135

Compare with Previous | Blame | View Log

--$ XILINX$RCSfile: xc3s1200e_fg320_1532.bsd,v $
--$ XILINX$Revision: 1.2.124.1 $

--###################################################################
-- WARNING !!!! .. This is a 1532 PROTOTYPE BDSL file.
--###################################################################
--
-- It should not be be used in place of, or along side of 1149.1 bsdl files.
--
-- This file conforms to the unapproved IEEE Standard 1532 BSDL draft
-- Standard. It may not function as expected with IEEE 1149.1 BSDL
-- and is subject to change pending the ratification of the 1532 Standard
-- by the IEEE.  When denoted as FINAL, it has been verified
-- syntactically, and against hardware.
--
-- Prototype 1532 BSDL file for device XC3S1200E, package FG320
-- Xilinx, Inc. $State: Exp $ $Date: 2008/07/07 22:23:21 $
--
-- Generated by BSDLnet bsdlnet Version 1.40
------------------------------------------------------------------------
-- Modification History
-- | Generated on 05/28/08
-- | CR # 471899
-- | Details -  Initial Release using BSDLnet.
-- |            Added 'attribute COMPLIANCE_PATTERNS' & changed boundary
-- |            register attribute to internal for PROG_B & PUDC_B.
------------------------------------------------------------------------
--
-- createBSDL template $RCSfile: xc3s1200e_fg320_1532.bsd,v $ $Revision: 1.2.124.1 $ $Date: 2008/07/07 22:23:21 $
--
--###################################################################
--
--
-- For technical support, contact Xilinx on the web at:
--
--      http://support.xilinx.com
--
-- Technical support can also take place via email or phone at:
--
--      North America   1-800-255-7778          hotline@xilinx.com
--      United Kingdom  (44) 1932 820821        ukhelp@xilinx.com
--      France          (33) 1 3463 0100        frhelp@xilinx.com
--      Germany         (49) 89 991 54930       dlhelp@xilinx.com
--      Japan           (81) 3-3297-9163        jhotline@xilinx.com
--
--
-- This BSDL file reflects the pre-configuration JTAG behavior. To reflect
-- the post-configuration JTAG behavior (if any), edit this file as described
-- below. Many of these changes are demonstrated by commented-out template
-- lines preceeding the lines they would replace:
--
-- 1. Set disable result of all pads as configured.
-- 2. Set safe state of boundary cells as necessary.
-- 3. Rename entity if necessary to avoid name collisions.
-- 4. Modify USERCODE value in USERCODE_REGISTER declaration.
--
--###################################################################--

----------------------------------

-- BSDL File for 1532 Standard.

----------------------------------

entity XC3S1200E_FG320 is

-- Generic Parameter

generic (PHYSICAL_PIN_MAP : string := "FG320" );

-- Logical Port Description

port (
        A10: inout bit; --  PAD40
        A11: inout bit; --  PAD49
        A12: inout bit; --  PAD54
        A13: inout bit; --  PAD59
        A14: inout bit; --  PAD62
        A16: inout bit; --  PAD76
        A4: inout bit; --  PAD5
        A6: inout bit; --  PAD14
        A7: inout bit; --  PAD20
        A8: inout bit; --  PAD28
        B10: inout bit; --  PAD41
        B11: inout bit; --  PAD42
        B13: inout bit; --  PAD58
        B14: inout bit; --  PAD63
        B16: inout bit; --  PAD77
        B4: inout bit; --  PAD4
        B6: inout bit; --  PAD15
        C1: inout bit; --  PAD304
        C11: inout bit; --  PAD48
        C14: inout bit; --  PAD72
        C17: inout bit; --  PAD80
        C18: inout bit; --  PAD81
        C2: inout bit; --  PAD303
        C3: inout bit; --  PAD2
        C4: inout bit; --  PAD6
        C5: inout bit; --  PAD8
        C7: inout bit; --  PAD27
        C9: inout bit; --  PAD37
        D1: inout bit; --  PAD302
        D10: inout bit; --  PAD44
        D11: inout bit; --  PAD47
        D13: inout bit; --  PAD57
        D14: inout bit; --  PAD73
        D16: inout bit; --  PAD82
        D17: inout bit; --  PAD83
        D2: inout bit; --  PAD301
        D4: inout bit; --  PAD298
        D5: inout bit; --  PAD7
        D6: inout bit; --  PAD12
        D7: inout bit; --  PAD26
        D9: inout bit; --  PAD36
        DONE: inout bit;
        E1: inout bit; --  PAD296
        E10: inout bit; --  PAD43
        E11: inout bit; --  PAD51
        E12: inout bit; --  PAD55
        E13: inout bit; --  PAD71
        E15: inout bit; --  PAD85
        E16: inout bit; --  PAD84
        E2: inout bit; --  PAD297
        E3: inout bit; --  PAD291
        E4: inout bit; --  PAD292
        E6: inout bit; --  PAD11
        E7: inout bit; --  PAD21
        E8: inout bit; --  PAD30
        E9: inout bit; --  PAD34
        F1: inout bit; --  PAD287
        F11: inout bit; --  PAD50
        F12: inout bit; --  PAD56
        F14: inout bit; --  PAD92
        F15: inout bit; --  PAD93
        F17: inout bit; --  PAD99
        F18: inout bit; --  PAD100
        F2: inout bit; --  PAD286
        F7: inout bit; --  PAD22
        F8: inout bit; --  PAD29
        F9: inout bit; --  PAD33
        G13: inout bit; --  PAD97
        G14: inout bit; --  PAD98
        G15: inout bit; --  PAD103
        G16: inout bit; --  PAD102
        G3: inout bit; --  PAD285
        G4: inout bit; --  PAD284
        G5: inout bit; --  PAD281
        G6: inout bit; --  PAD282
        G9: inout bit; --  PAD35
        GND: linkage bit_vector (1 to 28);
        H1: inout bit; --  PAD274
        H14: inout bit; --  PAD105
        H15: inout bit; --  PAD104
        H16: inout bit; --  PAD108
        H17: inout bit; --  PAD107
        H2: inout bit; --  PAD275
        H3: inout bit; --  PAD276
        H4: inout bit; --  PAD277
        H5: inout bit; --  PAD279
        H6: inout bit; --  PAD280
        IPAD10: in bit;
        IPAD101: in bit;
        IPAD106: in bit;
        IPAD111: in bit;
        IPAD116: in bit;
        IPAD121: in bit;
        IPAD126: in bit;
        IPAD131: in bit;
        IPAD136: in bit;
        IPAD141: in bit;
        IPAD148: in bit;
        IPAD155: in bit;
        IPAD161: in bit;
        IPAD162: in bit;
        IPAD183: in bit;
        IPAD184: in bit;
        IPAD190: in bit;
        IPAD191: in bit;
        IPAD197: in bit;
        IPAD198: in bit;
        IPAD204: in bit;
        IPAD205: in bit;
        IPAD226: in bit;
        IPAD227: in bit;
        IPAD230: in bit;
        IPAD231: in bit;
        IPAD238: in bit;
        IPAD243: in bit;
        IPAD248: in bit;
        IPAD253: in bit;
        IPAD258: in bit;
        IPAD263: in bit;
        IPAD268: in bit;
        IPAD273: in bit;
        IPAD278: in bit;
        IPAD283: in bit;
        IPAD288: in bit;
        IPAD293: in bit;
        IPAD3: in bit;
        IPAD300: in bit;
        IPAD31: in bit;
        IPAD32: in bit;
        IPAD38: in bit;
        IPAD39: in bit;
        IPAD45: in bit;
        IPAD46: in bit;
        IPAD52: in bit;
        IPAD53: in bit;
        IPAD74: in bit;
        IPAD75: in bit;
        IPAD78: in bit;
        IPAD79: in bit;
        IPAD86: in bit;
        IPAD9: in bit;
        IPAD91: in bit;
        IPAD96: in bit;
        J1: inout bit; --  PAD270
        J12: inout bit; --  PAD110
        J13: inout bit; --  PAD109
        J14: inout bit; --  PAD112
        J15: inout bit; --  PAD113
        J16: inout bit; --  PAD114
        J17: inout bit; --  PAD115
        J2: inout bit; --  PAD269
        J4: inout bit; --  PAD271
        J5: inout bit; --  PAD272
        K12: inout bit; --  PAD119
        K13: inout bit; --  PAD120
        K14: inout bit; --  PAD117
        K15: inout bit; --  PAD118
        K3: inout bit; --  PAD267
        K4: inout bit; --  PAD266
        K5: inout bit; --  PAD264
        K6: inout bit; --  PAD265
        L1: inout bit; --  PAD262
        L15: inout bit; --  PAD124
        L16: inout bit; --  PAD125
        L17: inout bit; --  PAD122
        L18: inout bit; --  PAD123
        L2: inout bit; --  PAD261
        L3: inout bit; --  PAD260
        L4: inout bit; --  PAD259
        L5: inout bit; --  PAD256
        L6: inout bit; --  PAD257
        M10: inout bit; --  PAD186
        M13: inout bit; --  PAD134
        M14: inout bit; --  PAD135
        M15: inout bit; --  PAD130
        M16: inout bit; --  PAD129
        M18: inout bit; --  PAD127
        M3: inout bit; --  PAD254
        M4: inout bit; --  PAD255
        M5: inout bit; --  PAD252
        M6: inout bit; --  PAD251
        M9: inout bit; --  PAD195
        N10: inout bit; --  PAD185
        N11: inout bit; --  PAD181
        N12: inout bit; --  PAD171
        N14: inout bit; --  PAD139
        N15: inout bit; --  PAD140
        N18: inout bit; --  PAD128
        N4: inout bit; --  PAD250
        N5: inout bit; --  PAD249
        N7: inout bit; --  PAD208
        N8: inout bit; --  PAD202
        N9: inout bit; --  PAD196
        P1: inout bit; --  PAD244
        P10: inout bit; --  PAD188
        P11: inout bit; --  PAD182
        P12: inout bit; --  PAD170
        P13: inout bit; --  PAD167
        P16: inout bit; --  PAD142
        P17: inout bit; --  PAD133
        P18: inout bit; --  PAD132
        P2: inout bit; --  PAD245
        P3: inout bit; --  PAD242
        P4: inout bit; --  PAD241
        P6: inout bit; --  PAD214
        P7: inout bit; --  PAD207
        P8: inout bit; --  PAD203
        P9: inout bit; --  PAD201
        PROG_B: in bit;
        PUDC_B: in bit; --  PAD1
        R10: inout bit; --  PAD189
        R11: inout bit; --  PAD180
        R12: inout bit; --  PAD173
        R13: inout bit; --  PAD166
        R14: inout bit; --  PAD159
        R15: inout bit; --  PAD147
        R16: inout bit; --  PAD146
        R18: inout bit; --  PAD150
        R2: inout bit; --  PAD234
        R3: inout bit; --  PAD235
        R5: inout bit; --  PAD222
        R6: inout bit; --  PAD215
        R8: inout bit; --  PAD200
        R9: inout bit; --  PAD194
        T1: inout bit; --  PAD232
        T12: inout bit; --  PAD174
        T14: inout bit; --  PAD160
        T15: inout bit; --  PAD158
        T16: inout bit; --  PAD154
        T17: inout bit; --  PAD151
        T18: inout bit; --  PAD149
        T2: inout bit; --  PAD233
        T3: inout bit; --  PAD228
        T4: inout bit; --  PAD224
        T5: inout bit; --  PAD221
        T8: inout bit; --  PAD199
        TCK: in bit;
        TDI: in bit;
        TDO: out bit;
        TMS: in bit;
        U13: inout bit; --  PAD172
        U15: inout bit; --  PAD156
        U16: inout bit; --  PAD153
        U18: inout bit; --  PAD152
        U3: inout bit; --  PAD229
        U4: inout bit; --  PAD225
        U5: inout bit; --  PAD223
        U6: inout bit; --  PAD209
        U9: inout bit; --  PAD193
        V11: inout bit; --  PAD187
        V12: inout bit; --  PAD179
        V13: inout bit; --  PAD178
        V15: inout bit; --  PAD157
        V5: inout bit; --  PAD211
        V6: inout bit; --  PAD210
        V7: inout bit; --  PAD206
        V9: inout bit; --  PAD192
        VCCAUX: linkage bit_vector (1 to 8);
        VCCINT: linkage bit_vector (1 to 8);
        VCCO_0: linkage bit_vector (1 to 5);
        VCCO_1: linkage bit_vector (1 to 5);
        VCCO_2: linkage bit_vector (1 to 5);
        VCCO_3: linkage bit_vector (1 to 5)
); --end port list

-- Use Statements

use STD_1149_1_2001.all;
use STD_1532_2002.all;

-- Component Conformance Statement(s)

attribute COMPONENT_CONFORMANCE of XC3S1200E_FG320 : entity is
        "STD_1149_1_2001";

-- Device Package Pin Mappings

attribute PIN_MAP of XC3S1200E_FG320 : entity is PHYSICAL_PIN_MAP;

constant FG320: PIN_MAP_STRING:=
        "A10:A10," &
        "A11:A11," &
        "A12:A12," &
        "A13:A13," &
        "A14:A14," &
        "A16:A16," &
        "A4:A4," &
        "A6:A6," &
        "A7:A7," &
        "A8:A8," &
        "B10:B10," &
        "B11:B11," &
        "B13:B13," &
        "B14:B14," &
        "B16:B16," &
        "B4:B4," &
        "B6:B6," &
        "C1:C1," &
        "C11:C11," &
        "C14:C14," &
        "C17:C17," &
        "C18:C18," &
        "C2:C2," &
        "C3:C3," &
        "C4:C4," &
        "C5:C5," &
        "C7:C7," &
        "C9:C9," &
        "D1:D1," &
        "D10:D10," &
        "D11:D11," &
        "D13:D13," &
        "D14:D14," &
        "D16:D16," &
        "D17:D17," &
        "D2:D2," &
        "D4:D4," &
        "D5:D5," &
        "D6:D6," &
        "D7:D7," &
        "D9:D9," &
        "DONE:V17," &
        "E1:E1," &
        "E10:E10," &
        "E11:E11," &
        "E12:E12," &
        "E13:E13," &
        "E15:E15," &
        "E16:E16," &
        "E2:E2," &
        "E3:E3," &
        "E4:E4," &
        "E6:E6," &
        "E7:E7," &
        "E8:E8," &
        "E9:E9," &
        "F1:F1," &
        "F11:F11," &
        "F12:F12," &
        "F14:F14," &
        "F15:F15," &
        "F17:F17," &
        "F18:F18," &
        "F2:F2," &
        "F7:F7," &
        "F8:F8," &
        "F9:F9," &
        "G13:G13," &
        "G14:G14," &
        "G15:G15," &
        "G16:G16," &
        "G3:G3," &
        "G4:G4," &
        "G5:G5," &
        "G6:G6," &
        "G9:G9," &
        "GND:(A1,A18,B2,B17,C10,G7,G12,H8,H9,H10," &
                "H11,J3,J8,J11,K8,K11,K16,L8,L9,L10," &
                "L11,M7,M12,T9,U2,U17,V1,V18)," &
        "H1:H1," &
        "H14:H14," &
        "H15:H15," &
        "H16:H16," &
        "H17:H17," &
        "H2:H2," &
        "H3:H3," &
        "H4:H4," &
        "H5:H5," &
        "H6:H6," &
        "IPAD10:A5," &
        "IPAD101:H13," &
        "IPAD106:G18," &
        "IPAD111:H18," &
        "IPAD116:K18," &
        "IPAD121:K17," &
        "IPAD126:L13," &
        "IPAD131:L14," &
        "IPAD136:N17," &
        "IPAD141:P15," &
        "IPAD148:R17," &
        "IPAD155:V16," &
        "IPAD161:U14," &
        "IPAD162:V14," &
        "IPAD183:U11," &
        "IPAD184:T11," &
        "IPAD190:T10," &
        "IPAD191:U10," &
        "IPAD197:V8," &
        "IPAD198:U8," &
        "IPAD204:R7," &
        "IPAD205:T7," &
        "IPAD226:V3," &
        "IPAD227:V4," &
        "IPAD230:V2," &
        "IPAD231:U1," &
        "IPAD238:R1," &
        "IPAD243:R4," &
        "IPAD248:N2," &
        "IPAD253:N1," &
        "IPAD258:M1," &
        "IPAD263:K7," &
        "IPAD268:K2," &
        "IPAD273:J6," &
        "IPAD278:J7," &
        "IPAD283:G1," &
        "IPAD288:F5," &
        "IPAD293:F4," &
        "IPAD3:A3," &
        "IPAD300:D3," &
        "IPAD31:D8," &
        "IPAD32:C8," &
        "IPAD38:B9," &
        "IPAD39:B8," &
        "IPAD45:G10," &
        "IPAD46:F10," &
        "IPAD52:D12," &
        "IPAD53:C12," &
        "IPAD74:A15," &
        "IPAD75:B15," &
        "IPAD78:C15," &
        "IPAD79:B18," &
        "IPAD86:D18," &
        "IPAD9:B5," &
        "IPAD91:E17," &
        "IPAD96:E18," &
        "J1:J1," &
        "J12:J12," &
        "J13:J13," &
        "J14:J14," &
        "J15:J15," &
        "J16:J16," &
        "J17:J17," &
        "J2:J2," &
        "J4:J4," &
        "J5:J5," &
        "K12:K12," &
        "K13:K13," &
        "K14:K14," &
        "K15:K15," &
        "K3:K3," &
        "K4:K4," &
        "K5:K5," &
        "K6:K6," &
        "L1:L1," &
        "L15:L15," &
        "L16:L16," &
        "L17:L17," &
        "L18:L18," &
        "L2:L2," &
        "L3:L3," &
        "L4:L4," &
        "L5:L5," &
        "L6:L6," &
        "M10:M10," &
        "M13:M13," &
        "M14:M14," &
        "M15:M15," &
        "M16:M16," &
        "M18:M18," &
        "M3:M3," &
        "M4:M4," &
        "M5:M5," &
        "M6:M6," &
        "M9:M9," &
        "N10:N10," &
        "N11:N11," &
        "N12:N12," &
        "N14:N14," &
        "N15:N15," &
        "N18:N18," &
        "N4:N4," &
        "N5:N5," &
        "N7:N7," &
        "N8:N8," &
        "N9:N9," &
        "P1:P1," &
        "P10:P10," &
        "P11:P11," &
        "P12:P12," &
        "P13:P13," &
        "P16:P16," &
        "P17:P17," &
        "P18:P18," &
        "P2:P2," &
        "P3:P3," &
        "P4:P4," &
        "P6:P6," &
        "P7:P7," &
        "P8:P8," &
        "P9:P9," &
        "PROG_B:B1," &
        "PUDC_B:B3," &
        "R10:R10," &
        "R11:R11," &
        "R12:R12," &
        "R13:R13," &
        "R14:R14," &
        "R15:R15," &
        "R16:R16," &
        "R18:R18," &
        "R2:R2," &
        "R3:R3," &
        "R5:R5," &
        "R6:R6," &
        "R8:R8," &
        "R9:R9," &
        "T1:T1," &
        "T12:T12," &
        "T14:T14," &
        "T15:T15," &
        "T16:T16," &
        "T17:T17," &
        "T18:T18," &
        "T2:T2," &
        "T3:T3," &
        "T4:T4," &
        "T5:T5," &
        "T8:T8," &
        "TCK:A17," &
        "TDI:A2," &
        "TDO:C16," &
        "TMS:D15," &
        "U13:U13," &
        "U15:U15," &
        "U16:U16," &
        "U18:U18," &
        "U3:U3," &
        "U4:U4," &
        "U5:U5," &
        "U6:U6," &
        "U9:U9," &
        "V11:V11," &
        "V12:V12," &
        "V13:V13," &
        "V15:V15," &
        "V5:V5," &
        "V6:V6," &
        "V7:V7," &
        "V9:V9," &
        "VCCAUX:(B7,B12,G2,G17,M2,M17,U7,U12)," &
        "VCCINT:(E5,E14,F6,F13,N6,N13,P5,P14)," &
        "VCCO_0:(A9,C6,C13,G8,G11)," &
        "VCCO_1:(F16,H12,J18,L12,N16)," &
        "VCCO_2:(M8,M11,T6,T13,V10)," &
        "VCCO_3:(F3,H7,K1,L7,N3)";


-- Scan Port Identification

attribute TAP_SCAN_OUT   of TDO : signal is true;
attribute TAP_SCAN_IN    of TDI : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (10.0e6, both);
attribute TAP_SCAN_MODE  of TMS : signal is true;

-- Compliance-Enable Description

attribute COMPLIANCE_PATTERNS of XC3S1200E_FG320 : entity is
        "(PROG_B, PUDC_B) (10)";

-- Instruction Register Description

attribute INSTRUCTION_LENGTH of XC3S1200E_FG320 : entity is 6;

attribute INSTRUCTION_OPCODE of XC3S1200E_FG320 : entity is

   "EXTEST      (001111)," &
   "SAMPLE      (000001)," &
   "PRELOAD     (000001)," & -- Same as SAMPLE
   "USER1       (000010)," & -- Not available until after configuration
   "USER2       (000011)," & -- Not available until after configuration
   "CFG_OUT     (000100)," & -- Not available during configuration with another mode.
   "CFG_IN      (000101)," & -- Not available during configuration with another mode.
   "INTEST      (000111)," &
   "USERCODE    (001000)," &
   "IDCODE      (001001)," &
   "HIGHZ       (001010)," &
   "JPROGRAM    (001011)," & -- Not available during configuration with another mode.
   "JSTART      (001100)," & -- Not available during configuration with another mode.
   "JSHUTDOWN   (001101)," & -- Not available during configuration with another mode.
   "BYPASS      (111111)," &
   "ISC_ENABLE  (010000)," &
   "ISC_PROGRAM (010001)," &
   "ISC_NOOP    (010100)," &
   "ISC_READ    (010101)," &
   "ISC_DISABLE (010110)";

attribute INSTRUCTION_CAPTURE of XC3S1200E_FG320 : entity is
-- Bit 5 is 1 when DONE is released (part of startup sequence)
-- Bit 4 is 1 if house-cleaning is complete
-- Bit 3 is ISC_Enabled
-- Bit 2 is ISC_Done
  "XXXX01" ;

attribute INSTRUCTION_PRIVATE of XC3S1200E_FG320 : entity is
   "USER1," &
   "USER2," &
   "CFG_OUT," &
   "CFG_IN," &
   "JPROGRAM," &
   "JSTART," &
   "JSHUTDOWN," &
   "ISC_ENABLE," &
   "ISC_PROGRAM," &
   "ISC_NOOP," &
   "ISC_READ," &
   "ISC_DISABLE";

-- Optional Register Description

attribute IDCODE_REGISTER of XC3S1200E_FG320 : entity is        "XXXX" &        -- version
        "0001110" &     -- family
        "000101110" &   -- array size
        "00001001001" & -- manufacturer
        "1";            -- required by 1149.1


attribute USERCODE_REGISTER of XC3S1200E_FG320 : entity is "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX";

-- Register Access Description

attribute REGISTER_ACCESS of XC3S1200E_FG320 : entity is
        "TEST1[8] (USER1)," &
        "TEST2[8] (USER2)," &
        "DEVICE_ID (USERCODE,IDCODE)," &
        "BYPASS (BYPASS,HIGHZ,JPROGRAM,JSTART,JSHUTDOWN)," &
        "CFG_DATA[3838752] (CFG_IN)," &
        "ISC_PDATA[16] (ISC_PROGRAM),"&
        "ISC_RDATA[16] (ISC_READ),"&
        "ISC_DEFAULT[5] (ISC_NOOP)," &
        "ISC_CONFIG[5] (ISC_ENABLE,ISC_DISABLE)," &
        "BOUNDARY (EXTEST, SAMPLE, PRELOAD, INTEST)";

-- Boundary-Scan Register Description

attribute BOUNDARY_LENGTH of XC3S1200E_FG320 : entity is 772;

attribute BOUNDARY_REGISTER of XC3S1200E_FG320 : entity is
-- cellnum (type, port, function, safe[, ccell, disval, disrslt])
        " 771 (BC_2, IPAD79, input, X)," &
        " 770 (BC_2, C17, input, X)," & --  PAD80
        " 769 (BC_2, C17, output3, X, 768, 1, PULL1)," & --  PAD80
        " 768 (BC_2, *, controlr, 1)," &
        " 767 (BC_2, C18, input, X)," & --  PAD81
        " 766 (BC_2, C18, output3, X, 765, 1, PULL1)," & --  PAD81
        " 765 (BC_2, *, controlr, 1)," &
        " 764 (BC_2, D16, input, X)," & --  PAD82
        " 763 (BC_2, D16, output3, X, 762, 1, PULL1)," & --  PAD82
        " 762 (BC_2, *, controlr, 1)," &
        " 761 (BC_2, D17, input, X)," & --  PAD83
        " 760 (BC_2, D17, output3, X, 759, 1, PULL1)," & --  PAD83
        " 759 (BC_2, *, controlr, 1)," &
        " 758 (BC_2, E16, input, X)," & --  PAD84
        " 757 (BC_2, E16, output3, X, 756, 1, PULL1)," & --  PAD84
        " 756 (BC_2, *, controlr, 1)," &
        " 755 (BC_2, E15, input, X)," & --  PAD85
        " 754 (BC_2, E15, output3, X, 753, 1, PULL1)," & --  PAD85
        " 753 (BC_2, *, controlr, 1)," &
        " 752 (BC_2, IPAD86, input, X)," &
        " 751 (BC_2, *, internal, X)," & --  PAD87.I
        " 750 (BC_2, *, internal, X)," & --  PAD87.O
        " 749 (BC_2, *, internal, 1)," & --  PAD87.T
        " 748 (BC_2, *, internal, X)," & --  PAD88.I
        " 747 (BC_2, *, internal, X)," & --  PAD88.O
        " 746 (BC_2, *, internal, 1)," & --  PAD88.T
        " 745 (BC_2, *, internal, X)," & --  PAD89.I
        " 744 (BC_2, *, internal, X)," & --  PAD89.O
        " 743 (BC_2, *, internal, 1)," & --  PAD89.T
        " 742 (BC_2, *, internal, X)," & --  PAD90.I
        " 741 (BC_2, *, internal, X)," & --  PAD90.O
        " 740 (BC_2, *, internal, 1)," & --  PAD90.T
        " 739 (BC_2, IPAD91, input, X)," &
        " 738 (BC_2, F14, input, X)," & --  PAD92
        " 737 (BC_2, F14, output3, X, 736, 1, PULL1)," & --  PAD92
        " 736 (BC_2, *, controlr, 1)," &
        " 735 (BC_2, F15, input, X)," & --  PAD93
        " 734 (BC_2, F15, output3, X, 733, 1, PULL1)," & --  PAD93
        " 733 (BC_2, *, controlr, 1)," &
        " 732 (BC_2, *, internal, X)," & --  PAD94.I
        " 731 (BC_2, *, internal, X)," & --  PAD94.O
        " 730 (BC_2, *, internal, 1)," & --  PAD94.T
        " 729 (BC_2, *, internal, X)," & --  PAD95.I
        " 728 (BC_2, *, internal, X)," & --  PAD95.O
        " 727 (BC_2, *, internal, 1)," & --  PAD95.T
        " 726 (BC_2, IPAD96, input, X)," &
        " 725 (BC_2, G13, input, X)," & --  PAD97
        " 724 (BC_2, G13, output3, X, 723, 1, PULL1)," & --  PAD97
        " 723 (BC_2, *, controlr, 1)," &
        " 722 (BC_2, G14, input, X)," & --  PAD98
        " 721 (BC_2, G14, output3, X, 720, 1, PULL1)," & --  PAD98
        " 720 (BC_2, *, controlr, 1)," &
        " 719 (BC_2, F17, input, X)," & --  PAD99
        " 718 (BC_2, F17, output3, X, 717, 1, PULL1)," & --  PAD99
        " 717 (BC_2, *, controlr, 1)," &
        " 716 (BC_2, F18, input, X)," & --  PAD100
        " 715 (BC_2, F18, output3, X, 714, 1, PULL1)," & --  PAD100
        " 714 (BC_2, *, controlr, 1)," &
        " 713 (BC_2, IPAD101, input, X)," &
        " 712 (BC_2, G16, input, X)," & --  PAD102
        " 711 (BC_2, G16, output3, X, 710, 1, PULL1)," & --  PAD102
        " 710 (BC_2, *, controlr, 1)," &
        " 709 (BC_2, G15, input, X)," & --  PAD103
        " 708 (BC_2, G15, output3, X, 707, 1, PULL1)," & --  PAD103
        " 707 (BC_2, *, controlr, 1)," &
        " 706 (BC_2, H15, input, X)," & --  PAD104
        " 705 (BC_2, H15, output3, X, 704, 1, PULL1)," & --  PAD104
        " 704 (BC_2, *, controlr, 1)," &
        " 703 (BC_2, H14, input, X)," & --  PAD105
        " 702 (BC_2, H14, output3, X, 701, 1, PULL1)," & --  PAD105
        " 701 (BC_2, *, controlr, 1)," &
        " 700 (BC_2, IPAD106, input, X)," &
        " 699 (BC_2, H17, input, X)," & --  PAD107
        " 698 (BC_2, H17, output3, X, 697, 1, PULL1)," & --  PAD107
        " 697 (BC_2, *, controlr, 1)," &
        " 696 (BC_2, H16, input, X)," & --  PAD108
        " 695 (BC_2, H16, output3, X, 694, 1, PULL1)," & --  PAD108
        " 694 (BC_2, *, controlr, 1)," &
        " 693 (BC_2, J13, input, X)," & --  PAD109
        " 692 (BC_2, J13, output3, X, 691, 1, PULL1)," & --  PAD109
        " 691 (BC_2, *, controlr, 1)," &
        " 690 (BC_2, J12, input, X)," & --  PAD110
        " 689 (BC_2, J12, output3, X, 688, 1, PULL1)," & --  PAD110
        " 688 (BC_2, *, controlr, 1)," &
        " 687 (BC_2, IPAD111, input, X)," &
        " 686 (BC_2, J14, input, X)," & --  PAD112
        " 685 (BC_2, J14, output3, X, 684, 1, PULL1)," & --  PAD112
        " 684 (BC_2, *, controlr, 1)," &
        " 683 (BC_2, J15, input, X)," & --  PAD113
        " 682 (BC_2, J15, output3, X, 681, 1, PULL1)," & --  PAD113
        " 681 (BC_2, *, controlr, 1)," &
        " 680 (BC_2, J16, input, X)," & --  PAD114
        " 679 (BC_2, J16, output3, X, 678, 1, PULL1)," & --  PAD114
        " 678 (BC_2, *, controlr, 1)," &
        " 677 (BC_2, J17, input, X)," & --  PAD115
        " 676 (BC_2, J17, output3, X, 675, 1, PULL1)," & --  PAD115
        " 675 (BC_2, *, controlr, 1)," &
        " 674 (BC_2, IPAD116, input, X)," &
        " 673 (BC_2, K14, input, X)," & --  PAD117
        " 672 (BC_2, K14, output3, X, 671, 1, PULL1)," & --  PAD117
        " 671 (BC_2, *, controlr, 1)," &
        " 670 (BC_2, K15, input, X)," & --  PAD118
        " 669 (BC_2, K15, output3, X, 668, 1, PULL1)," & --  PAD118
        " 668 (BC_2, *, controlr, 1)," &
        " 667 (BC_2, K12, input, X)," & --  PAD119
        " 666 (BC_2, K12, output3, X, 665, 1, PULL1)," & --  PAD119
        " 665 (BC_2, *, controlr, 1)," &
        " 664 (BC_2, K13, input, X)," & --  PAD120
        " 663 (BC_2, K13, output3, X, 662, 1, PULL1)," & --  PAD120
        " 662 (BC_2, *, controlr, 1)," &
        " 661 (BC_2, IPAD121, input, X)," &
        " 660 (BC_2, L17, input, X)," & --  PAD122
        " 659 (BC_2, L17, output3, X, 658, 1, PULL1)," & --  PAD122
        " 658 (BC_2, *, controlr, 1)," &
        " 657 (BC_2, L18, input, X)," & --  PAD123
        " 656 (BC_2, L18, output3, X, 655, 1, PULL1)," & --  PAD123
        " 655 (BC_2, *, controlr, 1)," &
        " 654 (BC_2, L15, input, X)," & --  PAD124
        " 653 (BC_2, L15, output3, X, 652, 1, PULL1)," & --  PAD124
        " 652 (BC_2, *, controlr, 1)," &
        " 651 (BC_2, L16, input, X)," & --  PAD125
        " 650 (BC_2, L16, output3, X, 649, 1, PULL1)," & --  PAD125
        " 649 (BC_2, *, controlr, 1)," &
        " 648 (BC_2, IPAD126, input, X)," &
        " 647 (BC_2, M18, input, X)," & --  PAD127
        " 646 (BC_2, M18, output3, X, 645, 1, PULL1)," & --  PAD127
        " 645 (BC_2, *, controlr, 1)," &
        " 644 (BC_2, N18, input, X)," & --  PAD128
        " 643 (BC_2, N18, output3, X, 642, 1, PULL1)," & --  PAD128
        " 642 (BC_2, *, controlr, 1)," &
        " 641 (BC_2, M16, input, X)," & --  PAD129
        " 640 (BC_2, M16, output3, X, 639, 1, PULL1)," & --  PAD129
        " 639 (BC_2, *, controlr, 1)," &
        " 638 (BC_2, M15, input, X)," & --  PAD130
        " 637 (BC_2, M15, output3, X, 636, 1, PULL1)," & --  PAD130
        " 636 (BC_2, *, controlr, 1)," &
        " 635 (BC_2, IPAD131, input, X)," &
        " 634 (BC_2, P18, input, X)," & --  PAD132
        " 633 (BC_2, P18, output3, X, 632, 1, PULL1)," & --  PAD132
        " 632 (BC_2, *, controlr, 1)," &
        " 631 (BC_2, P17, input, X)," & --  PAD133
        " 630 (BC_2, P17, output3, X, 629, 1, PULL1)," & --  PAD133
        " 629 (BC_2, *, controlr, 1)," &
        " 628 (BC_2, M13, input, X)," & --  PAD134
        " 627 (BC_2, M13, output3, X, 626, 1, PULL1)," & --  PAD134
        " 626 (BC_2, *, controlr, 1)," &
        " 625 (BC_2, M14, input, X)," & --  PAD135
        " 624 (BC_2, M14, output3, X, 623, 1, PULL1)," & --  PAD135
        " 623 (BC_2, *, controlr, 1)," &
        " 622 (BC_2, IPAD136, input, X)," &
        " 621 (BC_2, *, internal, X)," & --  PAD137.I
        " 620 (BC_2, *, internal, X)," & --  PAD137.O
        " 619 (BC_2, *, internal, 1)," & --  PAD137.T
        " 618 (BC_2, *, internal, X)," & --  PAD138.I
        " 617 (BC_2, *, internal, X)," & --  PAD138.O
        " 616 (BC_2, *, internal, 1)," & --  PAD138.T
        " 615 (BC_2, N14, input, X)," & --  PAD139
        " 614 (BC_2, N14, output3, X, 613, 1, PULL1)," & --  PAD139
        " 613 (BC_2, *, controlr, 1)," &
        " 612 (BC_2, N15, input, X)," & --  PAD140
        " 611 (BC_2, N15, output3, X, 610, 1, PULL1)," & --  PAD140
        " 610 (BC_2, *, controlr, 1)," &
        " 609 (BC_2, IPAD141, input, X)," &
        " 608 (BC_2, P16, input, X)," & --  PAD142
        " 607 (BC_2, P16, output3, X, 606, 1, PULL1)," & --  PAD142
        " 606 (BC_2, *, controlr, 1)," &
        " 605 (BC_2, *, internal, X)," & --  PAD143.I
        " 604 (BC_2, *, internal, X)," & --  PAD143.O
        " 603 (BC_2, *, internal, 1)," & --  PAD143.T
        " 602 (BC_2, *, internal, X)," & --  PAD144.I
        " 601 (BC_2, *, internal, X)," & --  PAD144.O
        " 600 (BC_2, *, internal, 1)," & --  PAD144.T
        " 599 (BC_2, *, internal, X)," & --  PAD145.I
        " 598 (BC_2, *, internal, X)," & --  PAD145.O
        " 597 (BC_2, *, internal, 1)," & --  PAD145.T
        " 596 (BC_2, R16, input, X)," & --  PAD146
        " 595 (BC_2, R16, output3, X, 594, 1, PULL1)," & --  PAD146
        " 594 (BC_2, *, controlr, 1)," &
        " 593 (BC_2, R15, input, X)," & --  PAD147
        " 592 (BC_2, R15, output3, X, 591, 1, PULL1)," & --  PAD147
        " 591 (BC_2, *, controlr, 1)," &
        " 590 (BC_2, IPAD148, input, X)," &
        " 589 (BC_2, T18, input, X)," & --  PAD149
        " 588 (BC_2, T18, output3, X, 587, 1, PULL1)," & --  PAD149
        " 587 (BC_2, *, controlr, 1)," &
        " 586 (BC_2, R18, input, X)," & --  PAD150
        " 585 (BC_2, R18, output3, X, 584, 1, PULL1)," & --  PAD150
        " 584 (BC_2, *, controlr, 1)," &
        " 583 (BC_2, T17, input, X)," & --  PAD151
        " 582 (BC_2, T17, output3, X, 581, 1, PULL1)," & --  PAD151
        " 581 (BC_2, *, controlr, 1)," &
        " 580 (BC_2, U18, input, X)," & --  PAD152
        " 579 (BC_2, U18, output3, X, 578, 1, PULL1)," & --  PAD152
        " 578 (BC_2, *, controlr, 1)," &
        " 577 (BC_2, DONE, input, X)," &
        " 576 (BC_2, DONE, output3, X, 575, 1, PULL1)," &
        " 575 (BC_2, *, controlr, 1)," &
        " 574 (BC_2, U16, input, X)," & --  PAD153
        " 573 (BC_2, U16, output3, X, 572, 1, PULL1)," & --  PAD153
        " 572 (BC_2, *, controlr, 1)," &
        " 571 (BC_2, T16, input, X)," & --  PAD154
        " 570 (BC_2, T16, output3, X, 569, 1, PULL1)," & --  PAD154
        " 569 (BC_2, *, controlr, 1)," &
        " 568 (BC_2, IPAD155, input, X)," &
        " 567 (BC_2, U15, input, X)," & --  PAD156
        " 566 (BC_2, U15, output3, X, 565, 1, PULL1)," & --  PAD156
        " 565 (BC_2, *, controlr, 1)," &
        " 564 (BC_2, V15, input, X)," & --  PAD157
        " 563 (BC_2, V15, output3, X, 562, 1, PULL1)," & --  PAD157
        " 562 (BC_2, *, controlr, 1)," &
        " 561 (BC_2, T15, input, X)," & --  PAD158
        " 560 (BC_2, T15, output3, X, 559, 1, PULL1)," & --  PAD158
        " 559 (BC_2, *, controlr, 1)," &
        " 558 (BC_2, R14, input, X)," & --  PAD159
        " 557 (BC_2, R14, output3, X, 556, 1, PULL1)," & --  PAD159
        " 556 (BC_2, *, controlr, 1)," &
        " 555 (BC_2, T14, input, X)," & --  PAD160
        " 554 (BC_2, T14, output3, X, 553, 1, PULL1)," & --  PAD160
        " 553 (BC_2, *, controlr, 1)," &
        " 552 (BC_2, IPAD161, input, X)," &
        " 551 (BC_2, IPAD162, input, X)," &
        " 550 (BC_2, *, internal, X)," & --  PAD163.I
        " 549 (BC_2, *, internal, X)," & --  PAD163.O
        " 548 (BC_2, *, internal, 1)," & --  PAD163.T
        " 547 (BC_2, *, internal, X)," & --  PAD164.I
        " 546 (BC_2, *, internal, X)," & --  PAD164.O
        " 545 (BC_2, *, internal, 1)," & --  PAD164.T
        " 544 (BC_2, *, internal, X)," & --  PAD165.I
        " 543 (BC_2, *, internal, X)," & --  PAD165.O
        " 542 (BC_2, *, internal, 1)," & --  PAD165.T
        " 541 (BC_2, R13, input, X)," & --  PAD166
        " 540 (BC_2, R13, output3, X, 539, 1, PULL1)," & --  PAD166
        " 539 (BC_2, *, controlr, 1)," &
        " 538 (BC_2, P13, input, X)," & --  PAD167
        " 537 (BC_2, P13, output3, X, 536, 1, PULL1)," & --  PAD167
        " 536 (BC_2, *, controlr, 1)," &
        " 535 (BC_2, *, internal, X)," & --  IPAD168
        " 534 (BC_2, *, internal, X)," & --  IPAD169
        " 533 (BC_2, P12, input, X)," & --  PAD170
        " 532 (BC_2, P12, output3, X, 531, 1, PULL1)," & --  PAD170
        " 531 (BC_2, *, controlr, 1)," &
        " 530 (BC_2, N12, input, X)," & --  PAD171
        " 529 (BC_2, N12, output3, X, 528, 1, PULL1)," & --  PAD171
        " 528 (BC_2, *, controlr, 1)," &
        " 527 (BC_2, U13, input, X)," & --  PAD172
        " 526 (BC_2, U13, output3, X, 525, 1, PULL1)," & --  PAD172
        " 525 (BC_2, *, controlr, 1)," &
        " 524 (BC_2, R12, input, X)," & --  PAD173
        " 523 (BC_2, R12, output3, X, 522, 1, PULL1)," & --  PAD173
        " 522 (BC_2, *, controlr, 1)," &
        " 521 (BC_2, T12, input, X)," & --  PAD174
        " 520 (BC_2, T12, output3, X, 519, 1, PULL1)," & --  PAD174
        " 519 (BC_2, *, controlr, 1)," &
        " 518 (BC_2, *, internal, X)," & --  IPAD175
        " 517 (BC_2, *, internal, X)," & --  IPAD176
        " 516 (BC_2, *, internal, X)," & --  PAD177.I
        " 515 (BC_2, *, internal, X)," & --  PAD177.O
        " 514 (BC_2, *, internal, 1)," & --  PAD177.T
        " 513 (BC_2, V13, input, X)," & --  PAD178
        " 512 (BC_2, V13, output3, X, 511, 1, PULL1)," & --  PAD178
        " 511 (BC_2, *, controlr, 1)," &
        " 510 (BC_2, V12, input, X)," & --  PAD179
        " 509 (BC_2, V12, output3, X, 508, 1, PULL1)," & --  PAD179
        " 508 (BC_2, *, controlr, 1)," &
        " 507 (BC_2, R11, input, X)," & --  PAD180
        " 506 (BC_2, R11, output3, X, 505, 1, PULL1)," & --  PAD180
        " 505 (BC_2, *, controlr, 1)," &
        " 504 (BC_2, N11, input, X)," & --  PAD181
        " 503 (BC_2, N11, output3, X, 502, 1, PULL1)," & --  PAD181
        " 502 (BC_2, *, controlr, 1)," &
        " 501 (BC_2, P11, input, X)," & --  PAD182
        " 500 (BC_2, P11, output3, X, 499, 1, PULL1)," & --  PAD182
        " 499 (BC_2, *, controlr, 1)," &
        " 498 (BC_2, IPAD183, input, X)," &
        " 497 (BC_2, IPAD184, input, X)," &
        " 496 (BC_2, N10, input, X)," & --  PAD185
        " 495 (BC_2, N10, output3, X, 494, 1, PULL1)," & --  PAD185
        " 494 (BC_2, *, controlr, 1)," &
        " 493 (BC_2, M10, input, X)," & --  PAD186
        " 492 (BC_2, M10, output3, X, 491, 1, PULL1)," & --  PAD186
        " 491 (BC_2, *, controlr, 1)," &
        " 490 (BC_2, V11, input, X)," & --  PAD187
        " 489 (BC_2, V11, output3, X, 488, 1, PULL1)," & --  PAD187
        " 488 (BC_2, *, controlr, 1)," &
        " 487 (BC_2, P10, input, X)," & --  PAD188
        " 486 (BC_2, P10, output3, X, 485, 1, PULL1)," & --  PAD188
        " 485 (BC_2, *, controlr, 1)," &
        " 484 (BC_2, R10, input, X)," & --  PAD189
        " 483 (BC_2, R10, output3, X, 482, 1, PULL1)," & --  PAD189
        " 482 (BC_2, *, controlr, 1)," &
        " 481 (BC_2, IPAD190, input, X)," &
        " 480 (BC_2, IPAD191, input, X)," &
        " 479 (BC_2, V9, input, X)," & --  PAD192
        " 478 (BC_2, V9, output3, X, 477, 1, PULL1)," & --  PAD192
        " 477 (BC_2, *, controlr, 1)," &
        " 476 (BC_2, U9, input, X)," & --  PAD193
        " 475 (BC_2, U9, output3, X, 474, 1, PULL1)," & --  PAD193
        " 474 (BC_2, *, controlr, 1)," &
        " 473 (BC_2, R9, input, X)," & --  PAD194
        " 472 (BC_2, R9, output3, X, 471, 1, PULL1)," & --  PAD194
        " 471 (BC_2, *, controlr, 1)," &
        " 470 (BC_2, M9, input, X)," & --  PAD195
        " 469 (BC_2, M9, output3, X, 468, 1, PULL1)," & --  PAD195
        " 468 (BC_2, *, controlr, 1)," &
        " 467 (BC_2, N9, input, X)," & --  PAD196
        " 466 (BC_2, N9, output3, X, 465, 1, PULL1)," & --  PAD196
        " 465 (BC_2, *, controlr, 1)," &
        " 464 (BC_2, IPAD197, input, X)," &
        " 463 (BC_2, IPAD198, input, X)," &
        " 462 (BC_2, T8, input, X)," & --  PAD199
        " 461 (BC_2, T8, output3, X, 460, 1, PULL1)," & --  PAD199
        " 460 (BC_2, *, controlr, 1)," &
        " 459 (BC_2, R8, input, X)," & --  PAD200
        " 458 (BC_2, R8, output3, X, 457, 1, PULL1)," & --  PAD200
        " 457 (BC_2, *, controlr, 1)," &
        " 456 (BC_2, P9, input, X)," & --  PAD201
        " 455 (BC_2, P9, output3, X, 454, 1, PULL1)," & --  PAD201
        " 454 (BC_2, *, controlr, 1)," &
        " 453 (BC_2, N8, input, X)," & --  PAD202
        " 452 (BC_2, N8, output3, X, 451, 1, PULL1)," & --  PAD202
        " 451 (BC_2, *, controlr, 1)," &
        " 450 (BC_2, P8, input, X)," & --  PAD203
        " 449 (BC_2, P8, output3, X, 448, 1, PULL1)," & --  PAD203
        " 448 (BC_2, *, controlr, 1)," &
        " 447 (BC_2, IPAD204, input, X)," &
        " 446 (BC_2, IPAD205, input, X)," &
        " 445 (BC_2, V7, input, X)," & --  PAD206
        " 444 (BC_2, V7, output3, X, 443, 1, PULL1)," & --  PAD206
        " 443 (BC_2, *, controlr, 1)," &
        " 442 (BC_2, P7, input, X)," & --  PAD207
        " 441 (BC_2, P7, output3, X, 440, 1, PULL1)," & --  PAD207
        " 440 (BC_2, *, controlr, 1)," &
        " 439 (BC_2, N7, input, X)," & --  PAD208
        " 438 (BC_2, N7, output3, X, 437, 1, PULL1)," & --  PAD208
        " 437 (BC_2, *, controlr, 1)," &
        " 436 (BC_2, U6, input, X)," & --  PAD209
        " 435 (BC_2, U6, output3, X, 434, 1, PULL1)," & --  PAD209
        " 434 (BC_2, *, controlr, 1)," &
        " 433 (BC_2, V6, input, X)," & --  PAD210
        " 432 (BC_2, V6, output3, X, 431, 1, PULL1)," & --  PAD210
        " 431 (BC_2, *, controlr, 1)," &
        " 430 (BC_2, V5, input, X)," & --  PAD211
        " 429 (BC_2, V5, output3, X, 428, 1, PULL1)," & --  PAD211
        " 428 (BC_2, *, controlr, 1)," &
        " 427 (BC_2, *, internal, X)," & --  IPAD212
        " 426 (BC_2, *, internal, X)," & --  IPAD213
        " 425 (BC_2, P6, input, X)," & --  PAD214
        " 424 (BC_2, P6, output3, X, 423, 1, PULL1)," & --  PAD214
        " 423 (BC_2, *, controlr, 1)," &
        " 422 (BC_2, R6, input, X)," & --  PAD215
        " 421 (BC_2, R6, output3, X, 420, 1, PULL1)," & --  PAD215
        " 420 (BC_2, *, controlr, 1)," &
        " 419 (BC_2, *, internal, X)," & --  PAD216.I
        " 418 (BC_2, *, internal, X)," & --  PAD216.O
        " 417 (BC_2, *, internal, 1)," & --  PAD216.T
        " 416 (BC_2, *, internal, X)," & --  PAD217.I
        " 415 (BC_2, *, internal, X)," & --  PAD217.O
        " 414 (BC_2, *, internal, 1)," & --  PAD217.T
        " 413 (BC_2, *, internal, X)," & --  PAD218.I
        " 412 (BC_2, *, internal, X)," & --  PAD218.O
        " 411 (BC_2, *, internal, 1)," & --  PAD218.T
        " 410 (BC_2, *, internal, X)," & --  IPAD219
        " 409 (BC_2, *, internal, X)," & --  IPAD220
        " 408 (BC_2, T5, input, X)," & --  PAD221
        " 407 (BC_2, T5, output3, X, 406, 1, PULL1)," & --  PAD221
        " 406 (BC_2, *, controlr, 1)," &
        " 405 (BC_2, R5, input, X)," & --  PAD222
        " 404 (BC_2, R5, output3, X, 403, 1, PULL1)," & --  PAD222
        " 403 (BC_2, *, controlr, 1)," &
        " 402 (BC_2, U5, input, X)," & --  PAD223
        " 401 (BC_2, U5, output3, X, 400, 1, PULL1)," & --  PAD223
        " 400 (BC_2, *, controlr, 1)," &
        " 399 (BC_2, T4, input, X)," & --  PAD224
        " 398 (BC_2, T4, output3, X, 397, 1, PULL1)," & --  PAD224
        " 397 (BC_2, *, controlr, 1)," &
        " 396 (BC_2, U4, input, X)," & --  PAD225
        " 395 (BC_2, U4, output3, X, 394, 1, PULL1)," & --  PAD225
        " 394 (BC_2, *, controlr, 1)," &
        " 393 (BC_2, IPAD226, input, X)," &
        " 392 (BC_2, IPAD227, input, X)," &
        " 391 (BC_2, T3, input, X)," & --  PAD228
        " 390 (BC_2, T3, output3, X, 389, 1, PULL1)," & --  PAD228
        " 389 (BC_2, *, controlr, 1)," &
        " 388 (BC_2, U3, input, X)," & --  PAD229
        " 387 (BC_2, U3, output3, X, 386, 1, PULL1)," & --  PAD229
        " 386 (BC_2, *, controlr, 1)," &
        " 385 (BC_2, IPAD230, input, X)," &
        " 384 (BC_2, IPAD231, input, X)," &
        " 383 (BC_2, T1, input, X)," & --  PAD232
        " 382 (BC_2, T1, output3, X, 381, 1, PULL1)," & --  PAD232
        " 381 (BC_2, *, controlr, 1)," &
        " 380 (BC_2, T2, input, X)," & --  PAD233
        " 379 (BC_2, T2, output3, X, 378, 1, PULL1)," & --  PAD233
        " 378 (BC_2, *, controlr, 1)," &
        " 377 (BC_2, R2, input, X)," & --  PAD234
        " 376 (BC_2, R2, output3, X, 375, 1, PULL1)," & --  PAD234
        " 375 (BC_2, *, controlr, 1)," &
        " 374 (BC_2, R3, input, X)," & --  PAD235
        " 373 (BC_2, R3, output3, X, 372, 1, PULL1)," & --  PAD235
        " 372 (BC_2, *, controlr, 1)," &
        " 371 (BC_2, *, internal, X)," & --  PAD236.I
        " 370 (BC_2, *, internal, X)," & --  PAD236.O
        " 369 (BC_2, *, internal, 1)," & --  PAD236.T
        " 368 (BC_2, *, internal, X)," & --  PAD237.I
        " 367 (BC_2, *, internal, X)," & --  PAD237.O
        " 366 (BC_2, *, internal, 1)," & --  PAD237.T
        " 365 (BC_2, IPAD238, input, X)," &
        " 364 (BC_2, *, internal, X)," & --  PAD239.I
        " 363 (BC_2, *, internal, X)," & --  PAD239.O
        " 362 (BC_2, *, internal, 1)," & --  PAD239.T
        " 361 (BC_2, *, internal, X)," & --  PAD240.I
        " 360 (BC_2, *, internal, X)," & --  PAD240.O
        " 359 (BC_2, *, internal, 1)," & --  PAD240.T
        " 358 (BC_2, P4, input, X)," & --  PAD241
        " 357 (BC_2, P4, output3, X, 356, 1, PULL1)," & --  PAD241
        " 356 (BC_2, *, controlr, 1)," &
        " 355 (BC_2, P3, input, X)," & --  PAD242
        " 354 (BC_2, P3, output3, X, 353, 1, PULL1)," & --  PAD242
        " 353 (BC_2, *, controlr, 1)," &
        " 352 (BC_2, IPAD243, input, X)," &
        " 351 (BC_2, P1, input, X)," & --  PAD244
        " 350 (BC_2, P1, output3, X, 349, 1, PULL1)," & --  PAD244
        " 349 (BC_2, *, controlr, 1)," &
        " 348 (BC_2, P2, input, X)," & --  PAD245
        " 347 (BC_2, P2, output3, X, 346, 1, PULL1)," & --  PAD245
        " 346 (BC_2, *, controlr, 1)," &
        " 345 (BC_2, *, internal, X)," & --  PAD246.I
        " 344 (BC_2, *, internal, X)," & --  PAD246.O
        " 343 (BC_2, *, internal, 1)," & --  PAD246.T
        " 342 (BC_2, *, internal, X)," & --  PAD247.I
        " 341 (BC_2, *, internal, X)," & --  PAD247.O
        " 340 (BC_2, *, internal, 1)," & --  PAD247.T
        " 339 (BC_2, IPAD248, input, X)," &
        " 338 (BC_2, N5, input, X)," & --  PAD249
        " 337 (BC_2, N5, output3, X, 336, 1, PULL1)," & --  PAD249
        " 336 (BC_2, *, controlr, 1)," &
        " 335 (BC_2, N4, input, X)," & --  PAD250
        " 334 (BC_2, N4, output3, X, 333, 1, PULL1)," & --  PAD250
        " 333 (BC_2, *, controlr, 1)," &
        " 332 (BC_2, M6, input, X)," & --  PAD251
        " 331 (BC_2, M6, output3, X, 330, 1, PULL1)," & --  PAD251
        " 330 (BC_2, *, controlr, 1)," &
        " 329 (BC_2, M5, input, X)," & --  PAD252
        " 328 (BC_2, M5, output3, X, 327, 1, PULL1)," & --  PAD252
        " 327 (BC_2, *, controlr, 1)," &
        " 326 (BC_2, IPAD253, input, X)," &
        " 325 (BC_2, M3, input, X)," & --  PAD254
        " 324 (BC_2, M3, output3, X, 323, 1, PULL1)," & --  PAD254
        " 323 (BC_2, *, controlr, 1)," &
        " 322 (BC_2, M4, input, X)," & --  PAD255
        " 321 (BC_2, M4, output3, X, 320, 1, PULL1)," & --  PAD255
        " 320 (BC_2, *, controlr, 1)," &
        " 319 (BC_2, L5, input, X)," & --  PAD256
        " 318 (BC_2, L5, output3, X, 317, 1, PULL1)," & --  PAD256
        " 317 (BC_2, *, controlr, 1)," &
        " 316 (BC_2, L6, input, X)," & --  PAD257
        " 315 (BC_2, L6, output3, X, 314, 1, PULL1)," & --  PAD257
        " 314 (BC_2, *, controlr, 1)," &
        " 313 (BC_2, IPAD258, input, X)," &
        " 312 (BC_2, L4, input, X)," & --  PAD259
        " 311 (BC_2, L4, output3, X, 310, 1, PULL1)," & --  PAD259
        " 310 (BC_2, *, controlr, 1)," &
        " 309 (BC_2, L3, input, X)," & --  PAD260
        " 308 (BC_2, L3, output3, X, 307, 1, PULL1)," & --  PAD260
        " 307 (BC_2, *, controlr, 1)," &
        " 306 (BC_2, L2, input, X)," & --  PAD261
        " 305 (BC_2, L2, output3, X, 304, 1, PULL1)," & --  PAD261
        " 304 (BC_2, *, controlr, 1)," &
        " 303 (BC_2, L1, input, X)," & --  PAD262
        " 302 (BC_2, L1, output3, X, 301, 1, PULL1)," & --  PAD262
        " 301 (BC_2, *, controlr, 1)," &
        " 300 (BC_2, IPAD263, input, X)," &
        " 299 (BC_2, K5, input, X)," & --  PAD264
        " 298 (BC_2, K5, output3, X, 297, 1, PULL1)," & --  PAD264
        " 297 (BC_2, *, controlr, 1)," &
        " 296 (BC_2, K6, input, X)," & --  PAD265
        " 295 (BC_2, K6, output3, X, 294, 1, PULL1)," & --  PAD265
        " 294 (BC_2, *, controlr, 1)," &
        " 293 (BC_2, K4, input, X)," & --  PAD266
        " 292 (BC_2, K4, output3, X, 291, 1, PULL1)," & --  PAD266
        " 291 (BC_2, *, controlr, 1)," &
        " 290 (BC_2, K3, input, X)," & --  PAD267
        " 289 (BC_2, K3, output3, X, 288, 1, PULL1)," & --  PAD267
        " 288 (BC_2, *, controlr, 1)," &
        " 287 (BC_2, IPAD268, input, X)," &
        " 286 (BC_2, J2, input, X)," & --  PAD269
        " 285 (BC_2, J2, output3, X, 284, 1, PULL1)," & --  PAD269
        " 284 (BC_2, *, controlr, 1)," &
        " 283 (BC_2, J1, input, X)," & --  PAD270
        " 282 (BC_2, J1, output3, X, 281, 1, PULL1)," & --  PAD270
        " 281 (BC_2, *, controlr, 1)," &
        " 280 (BC_2, J4, input, X)," & --  PAD271
        " 279 (BC_2, J4, output3, X, 278, 1, PULL1)," & --  PAD271
        " 278 (BC_2, *, controlr, 1)," &
        " 277 (BC_2, J5, input, X)," & --  PAD272
        " 276 (BC_2, J5, output3, X, 275, 1, PULL1)," & --  PAD272
        " 275 (BC_2, *, controlr, 1)," &
        " 274 (BC_2, IPAD273, input, X)," &
        " 273 (BC_2, H1, input, X)," & --  PAD274
        " 272 (BC_2, H1, output3, X, 271, 1, PULL1)," & --  PAD274
        " 271 (BC_2, *, controlr, 1)," &
        " 270 (BC_2, H2, input, X)," & --  PAD275
        " 269 (BC_2, H2, output3, X, 268, 1, PULL1)," & --  PAD275
        " 268 (BC_2, *, controlr, 1)," &
        " 267 (BC_2, H3, input, X)," & --  PAD276
        " 266 (BC_2, H3, output3, X, 265, 1, PULL1)," & --  PAD276
        " 265 (BC_2, *, controlr, 1)," &
        " 264 (BC_2, H4, input, X)," & --  PAD277
        " 263 (BC_2, H4, output3, X, 262, 1, PULL1)," & --  PAD277
        " 262 (BC_2, *, controlr, 1)," &
        " 261 (BC_2, IPAD278, input, X)," &
        " 260 (BC_2, H5, input, X)," & --  PAD279
        " 259 (BC_2, H5, output3, X, 258, 1, PULL1)," & --  PAD279
        " 258 (BC_2, *, controlr, 1)," &
        " 257 (BC_2, H6, input, X)," & --  PAD280
        " 256 (BC_2, H6, output3, X, 255, 1, PULL1)," & --  PAD280
        " 255 (BC_2, *, controlr, 1)," &
        " 254 (BC_2, G5, input, X)," & --  PAD281
        " 253 (BC_2, G5, output3, X, 252, 1, PULL1)," & --  PAD281
        " 252 (BC_2, *, controlr, 1)," &
        " 251 (BC_2, G6, input, X)," & --  PAD282
        " 250 (BC_2, G6, output3, X, 249, 1, PULL1)," & --  PAD282
        " 249 (BC_2, *, controlr, 1)," &
        " 248 (BC_2, IPAD283, input, X)," &
        " 247 (BC_2, G4, input, X)," & --  PAD284
        " 246 (BC_2, G4, output3, X, 245, 1, PULL1)," & --  PAD284
        " 245 (BC_2, *, controlr, 1)," &
        " 244 (BC_2, G3, input, X)," & --  PAD285
        " 243 (BC_2, G3, output3, X, 242, 1, PULL1)," & --  PAD285
        " 242 (BC_2, *, controlr, 1)," &
        " 241 (BC_2, F2, input, X)," & --  PAD286
        " 240 (BC_2, F2, output3, X, 239, 1, PULL1)," & --  PAD286
        " 239 (BC_2, *, controlr, 1)," &
        " 238 (BC_2, F1, input, X)," & --  PAD287
        " 237 (BC_2, F1, output3, X, 236, 1, PULL1)," & --  PAD287
        " 236 (BC_2, *, controlr, 1)," &
        " 235 (BC_2, IPAD288, input, X)," &
        " 234 (BC_2, *, internal, X)," & --  PAD289.I
        " 233 (BC_2, *, internal, X)," & --  PAD289.O
        " 232 (BC_2, *, internal, 1)," & --  PAD289.T
        " 231 (BC_2, *, internal, X)," & --  PAD290.I
        " 230 (BC_2, *, internal, X)," & --  PAD290.O
        " 229 (BC_2, *, internal, 1)," & --  PAD290.T
        " 228 (BC_2, E3, input, X)," & --  PAD291
        " 227 (BC_2, E3, output3, X, 226, 1, PULL1)," & --  PAD291
        " 226 (BC_2, *, controlr, 1)," &
        " 225 (BC_2, E4, input, X)," & --  PAD292
        " 224 (BC_2, E4, output3, X, 223, 1, PULL1)," & --  PAD292
        " 223 (BC_2, *, controlr, 1)," &
        " 222 (BC_2, IPAD293, input, X)," &
        " 221 (BC_2, *, internal, X)," & --  PAD294.I
        " 220 (BC_2, *, internal, X)," & --  PAD294.O
        " 219 (BC_2, *, internal, 1)," & --  PAD294.T
        " 218 (BC_2, *, internal, X)," & --  PAD295.I
        " 217 (BC_2, *, internal, X)," & --  PAD295.O
        " 216 (BC_2, *, internal, 1)," & --  PAD295.T
        " 215 (BC_2, E1, input, X)," & --  PAD296
        " 214 (BC_2, E1, output3, X, 213, 1, PULL1)," & --  PAD296
        " 213 (BC_2, *, controlr, 1)," &
        " 212 (BC_2, E2, input, X)," & --  PAD297
        " 211 (BC_2, E2, output3, X, 210, 1, PULL1)," & --  PAD297
        " 210 (BC_2, *, controlr, 1)," &
        " 209 (BC_2, D4, input, X)," & --  PAD298
        " 208 (BC_2, D4, output3, X, 207, 1, PULL1)," & --  PAD298
        " 207 (BC_2, *, controlr, 1)," &
        " 206 (BC_2, *, internal, X)," & --  PAD299.I
        " 205 (BC_2, *, internal, X)," & --  PAD299.O
        " 204 (BC_2, *, internal, 1)," & --  PAD299.T
        " 203 (BC_2, IPAD300, input, X)," &
        " 202 (BC_2, D2, input, X)," & --  PAD301
        " 201 (BC_2, D2, output3, X, 200, 1, PULL1)," & --  PAD301
        " 200 (BC_2, *, controlr, 1)," &
        " 199 (BC_2, D1, input, X)," & --  PAD302
        " 198 (BC_2, D1, output3, X, 197, 1, PULL1)," & --  PAD302
        " 197 (BC_2, *, controlr, 1)," &
        " 196 (BC_2, C2, input, X)," & --  PAD303
        " 195 (BC_2, C2, output3, X, 194, 1, PULL1)," & --  PAD303
        " 194 (BC_2, *, controlr, 1)," &
        " 193 (BC_2, C1, input, X)," & --  PAD304
        " 192 (BC_2, C1, output3, X, 191, 1, PULL1)," & --  PAD304
        " 191 (BC_2, *, controlr, 1)," &
        " 190 (BC_2, *, internal, 1)," & --  PROG_B
        " 189 (BC_2, *, internal, 1)," & --  PUDC_B
        " 188 (BC_2, *, internal, 1)," & --  PUDC_B
        " 187 (BC_2, *, internal, 1)," & --  PUDC_B
        " 186 (BC_2, C3, input, X)," & --  PAD2
        " 185 (BC_2, C3, output3, X, 184, 1, PULL1)," & --  PAD2
        " 184 (BC_2, *, controlr, 1)," &
        " 183 (BC_2, IPAD3, input, X)," &
        " 182 (BC_2, B4, input, X)," & --  PAD4
        " 181 (BC_2, B4, output3, X, 180, 1, PULL1)," & --  PAD4
        " 180 (BC_2, *, controlr, 1)," &
        " 179 (BC_2, A4, input, X)," & --  PAD5
        " 178 (BC_2, A4, output3, X, 177, 1, PULL1)," & --  PAD5
        " 177 (BC_2, *, controlr, 1)," &
        " 176 (BC_2, C4, input, X)," & --  PAD6
        " 175 (BC_2, C4, output3, X, 174, 1, PULL1)," & --  PAD6
        " 174 (BC_2, *, controlr, 1)," &
        " 173 (BC_2, D5, input, X)," & --  PAD7
        " 172 (BC_2, D5, output3, X, 171, 1, PULL1)," & --  PAD7
        " 171 (BC_2, *, controlr, 1)," &
        " 170 (BC_2, C5, input, X)," & --  PAD8
        " 169 (BC_2, C5, output3, X, 168, 1, PULL1)," & --  PAD8
        " 168 (BC_2, *, controlr, 1)," &
        " 167 (BC_2, IPAD9, input, X)," &
        " 166 (BC_2, IPAD10, input, X)," &
        " 165 (BC_2, E6, input, X)," & --  PAD11
        " 164 (BC_2, E6, output3, X, 163, 1, PULL1)," & --  PAD11
        " 163 (BC_2, *, controlr, 1)," &
        " 162 (BC_2, D6, input, X)," & --  PAD12
        " 161 (BC_2, D6, output3, X, 160, 1, PULL1)," & --  PAD12
        " 160 (BC_2, *, controlr, 1)," &
        " 159 (BC_2, *, internal, X)," & --  PAD13.I
        " 158 (BC_2, *, internal, X)," & --  PAD13.O
        " 157 (BC_2, *, internal, 1)," & --  PAD13.T
        " 156 (BC_2, A6, input, X)," & --  PAD14
        " 155 (BC_2, A6, output3, X, 154, 1, PULL1)," & --  PAD14
        " 154 (BC_2, *, controlr, 1)," &
        " 153 (BC_2, B6, input, X)," & --  PAD15
        " 152 (BC_2, B6, output3, X, 151, 1, PULL1)," & --  PAD15
        " 151 (BC_2, *, controlr, 1)," &
        " 150 (BC_2, *, internal, X)," & --  IPAD16
        " 149 (BC_2, *, internal, X)," & --  IPAD17
        " 148 (BC_2, *, internal, X)," & --  PAD18.I
        " 147 (BC_2, *, internal, X)," & --  PAD18.O
        " 146 (BC_2, *, internal, 1)," & --  PAD18.T
        " 145 (BC_2, *, internal, X)," & --  PAD19.I
        " 144 (BC_2, *, internal, X)," & --  PAD19.O
        " 143 (BC_2, *, internal, 1)," & --  PAD19.T
        " 142 (BC_2, A7, input, X)," & --  PAD20
        " 141 (BC_2, A7, output3, X, 140, 1, PULL1)," & --  PAD20
        " 140 (BC_2, *, controlr, 1)," &
        " 139 (BC_2, E7, input, X)," & --  PAD21
        " 138 (BC_2, E7, output3, X, 137, 1, PULL1)," & --  PAD21
        " 137 (BC_2, *, controlr, 1)," &
        " 136 (BC_2, F7, input, X)," & --  PAD22
        " 135 (BC_2, F7, output3, X, 134, 1, PULL1)," & --  PAD22
        " 134 (BC_2, *, controlr, 1)," &
        " 133 (BC_2, *, internal, X)," & --  IPAD23
        " 132 (BC_2, *, internal, X)," & --  IPAD24
        " 131 (BC_2, *, internal, X)," & --  PAD25.I
        " 130 (BC_2, *, internal, X)," & --  PAD25.O
        " 129 (BC_2, *, internal, 1)," & --  PAD25.T
        " 128 (BC_2, D7, input, X)," & --  PAD26
        " 127 (BC_2, D7, output3, X, 126, 1, PULL1)," & --  PAD26
        " 126 (BC_2, *, controlr, 1)," &
        " 125 (BC_2, C7, input, X)," & --  PAD27
        " 124 (BC_2, C7, output3, X, 123, 1, PULL1)," & --  PAD27
        " 123 (BC_2, *, controlr, 1)," &
        " 122 (BC_2, A8, input, X)," & --  PAD28
        " 121 (BC_2, A8, output3, X, 120, 1, PULL1)," & --  PAD28
        " 120 (BC_2, *, controlr, 1)," &
        " 119 (BC_2, F8, input, X)," & --  PAD29
        " 118 (BC_2, F8, output3, X, 117, 1, PULL1)," & --  PAD29
        " 117 (BC_2, *, controlr, 1)," &
        " 116 (BC_2, E8, input, X)," & --  PAD30
        " 115 (BC_2, E8, output3, X, 114, 1, PULL1)," & --  PAD30
        " 114 (BC_2, *, controlr, 1)," &
        " 113 (BC_2, IPAD31, input, X)," &
        " 112 (BC_2, IPAD32, input, X)," &
        " 111 (BC_2, F9, input, X)," & --  PAD33
        " 110 (BC_2, F9, output3, X, 109, 1, PULL1)," & --  PAD33
        " 109 (BC_2, *, controlr, 1)," &
        " 108 (BC_2, E9, input, X)," & --  PAD34
        " 107 (BC_2, E9, output3, X, 106, 1, PULL1)," & --  PAD34
        " 106 (BC_2, *, controlr, 1)," &
        " 105 (BC_2, G9, input, X)," & --  PAD35
        " 104 (BC_2, G9, output3, X, 103, 1, PULL1)," & --  PAD35
        " 103 (BC_2, *, controlr, 1)," &
        " 102 (BC_2, D9, input, X)," & --  PAD36
        " 101 (BC_2, D9, output3, X, 100, 1, PULL1)," & --  PAD36
        " 100 (BC_2, *, controlr, 1)," &
        "  99 (BC_2, C9, input, X)," & --  PAD37
        "  98 (BC_2, C9, output3, X, 97, 1, PULL1)," & --  PAD37
        "  97 (BC_2, *, controlr, 1)," &
        "  96 (BC_2, IPAD38, input, X)," &
        "  95 (BC_2, IPAD39, input, X)," &
        "  94 (BC_2, A10, input, X)," & --  PAD40
        "  93 (BC_2, A10, output3, X, 92, 1, PULL1)," & --  PAD40
        "  92 (BC_2, *, controlr, 1)," &
        "  91 (BC_2, B10, input, X)," & --  PAD41
        "  90 (BC_2, B10, output3, X, 89, 1, PULL1)," & --  PAD41
        "  89 (BC_2, *, controlr, 1)," &
        "  88 (BC_2, B11, input, X)," & --  PAD42
        "  87 (BC_2, B11, output3, X, 86, 1, PULL1)," & --  PAD42
        "  86 (BC_2, *, controlr, 1)," &
        "  85 (BC_2, E10, input, X)," & --  PAD43
        "  84 (BC_2, E10, output3, X, 83, 1, PULL1)," & --  PAD43
        "  83 (BC_2, *, controlr, 1)," &
        "  82 (BC_2, D10, input, X)," & --  PAD44
        "  81 (BC_2, D10, output3, X, 80, 1, PULL1)," & --  PAD44
        "  80 (BC_2, *, controlr, 1)," &
        "  79 (BC_2, IPAD45, input, X)," &
        "  78 (BC_2, IPAD46, input, X)," &
        "  77 (BC_2, D11, input, X)," & --  PAD47
        "  76 (BC_2, D11, output3, X, 75, 1, PULL1)," & --  PAD47
        "  75 (BC_2, *, controlr, 1)," &
        "  74 (BC_2, C11, input, X)," & --  PAD48
        "  73 (BC_2, C11, output3, X, 72, 1, PULL1)," & --  PAD48
        "  72 (BC_2, *, controlr, 1)," &
        "  71 (BC_2, A11, input, X)," & --  PAD49
        "  70 (BC_2, A11, output3, X, 69, 1, PULL1)," & --  PAD49
        "  69 (BC_2, *, controlr, 1)," &
        "  68 (BC_2, F11, input, X)," & --  PAD50
        "  67 (BC_2, F11, output3, X, 66, 1, PULL1)," & --  PAD50
        "  66 (BC_2, *, controlr, 1)," &
        "  65 (BC_2, E11, input, X)," & --  PAD51
        "  64 (BC_2, E11, output3, X, 63, 1, PULL1)," & --  PAD51
        "  63 (BC_2, *, controlr, 1)," &
        "  62 (BC_2, IPAD52, input, X)," &
        "  61 (BC_2, IPAD53, input, X)," &
        "  60 (BC_2, A12, input, X)," & --  PAD54
        "  59 (BC_2, A12, output3, X, 58, 1, PULL1)," & --  PAD54
        "  58 (BC_2, *, controlr, 1)," &
        "  57 (BC_2, E12, input, X)," & --  PAD55
        "  56 (BC_2, E12, output3, X, 55, 1, PULL1)," & --  PAD55
        "  55 (BC_2, *, controlr, 1)," &
        "  54 (BC_2, F12, input, X)," & --  PAD56
        "  53 (BC_2, F12, output3, X, 52, 1, PULL1)," & --  PAD56
        "  52 (BC_2, *, controlr, 1)," &
        "  51 (BC_2, D13, input, X)," & --  PAD57
        "  50 (BC_2, D13, output3, X, 49, 1, PULL1)," & --  PAD57
        "  49 (BC_2, *, controlr, 1)," &
        "  48 (BC_2, B13, input, X)," & --  PAD58
        "  47 (BC_2, B13, output3, X, 46, 1, PULL1)," & --  PAD58
        "  46 (BC_2, *, controlr, 1)," &
        "  45 (BC_2, A13, input, X)," & --  PAD59
        "  44 (BC_2, A13, output3, X, 43, 1, PULL1)," & --  PAD59
        "  43 (BC_2, *, controlr, 1)," &
        "  42 (BC_2, *, internal, X)," & --  IPAD60
        "  41 (BC_2, *, internal, X)," & --  IPAD61
        "  40 (BC_2, A14, input, X)," & --  PAD62
        "  39 (BC_2, A14, output3, X, 38, 1, PULL1)," & --  PAD62
        "  38 (BC_2, *, controlr, 1)," &
        "  37 (BC_2, B14, input, X)," & --  PAD63
        "  36 (BC_2, B14, output3, X, 35, 1, PULL1)," & --  PAD63
        "  35 (BC_2, *, controlr, 1)," &
        "  34 (BC_2, *, internal, X)," & --  PAD64.I
        "  33 (BC_2, *, internal, X)," & --  PAD64.O
        "  32 (BC_2, *, internal, 1)," & --  PAD64.T
        "  31 (BC_2, *, internal, X)," & --  PAD65.I
        "  30 (BC_2, *, internal, X)," & --  PAD65.O
        "  29 (BC_2, *, internal, 1)," & --  PAD65.T
        "  28 (BC_2, *, internal, X)," & --  PAD66.I
        "  27 (BC_2, *, internal, X)," & --  PAD66.O
        "  26 (BC_2, *, internal, 1)," & --  PAD66.T
        "  25 (BC_2, *, internal, X)," & --  IPAD67
        "  24 (BC_2, *, internal, X)," & --  IPAD68
        "  23 (BC_2, *, internal, X)," & --  PAD69.I
        "  22 (BC_2, *, internal, X)," & --  PAD69.O
        "  21 (BC_2, *, internal, 1)," & --  PAD69.T
        "  20 (BC_2, *, internal, X)," & --  PAD70.I
        "  19 (BC_2, *, internal, X)," & --  PAD70.O
        "  18 (BC_2, *, internal, 1)," & --  PAD70.T
        "  17 (BC_2, E13, input, X)," & --  PAD71
        "  16 (BC_2, E13, output3, X, 15, 1, PULL1)," & --  PAD71
        "  15 (BC_2, *, controlr, 1)," &
        "  14 (BC_2, C14, input, X)," & --  PAD72
        "  13 (BC_2, C14, output3, X, 12, 1, PULL1)," & --  PAD72
        "  12 (BC_2, *, controlr, 1)," &
        "  11 (BC_2, D14, input, X)," & --  PAD73
        "  10 (BC_2, D14, output3, X, 9, 1, PULL1)," & --  PAD73
        "   9 (BC_2, *, controlr, 1)," &
        "   8 (BC_2, IPAD74, input, X)," &
        "   7 (BC_2, IPAD75, input, X)," &
        "   6 (BC_2, A16, input, X)," & --  PAD76
        "   5 (BC_2, A16, output3, X, 4, 1, PULL1)," & --  PAD76
        "   4 (BC_2, *, controlr, 1)," &
        "   3 (BC_2, B16, input, X)," & --  PAD77
        "   2 (BC_2, B16, output3, X, 1, 1, PULL1)," & --  PAD77
        "   1 (BC_2, *, controlr, 1)," &
        "   0 (BC_2, IPAD78, input, X)";

        
attribute ISC_PIN_BEHAVIOR of XC3S1200E_FG320 : entity is
        "HIGHZ" ;       -- clamp behavior
                        -- no status

attribute ISC_STATUS of XC3S1200E_FG320 : entity is
        "NOT IMPLEMENTED" ;

attribute ISC_BLANK_USERCODE of XC3S1200E_FG320 : entity is
        "00000000000000000000000000000000";

attribute ISC_FLOW of XC3S1200E_FG320 : entity is
        -- Enable program 
        "flow_enable            " &
        "initialize             " &
                "       (ISC_ENABLE     5:00    wait TCK 16)," &

        "flow_disable           " &
        "initialize             " &
                "       (ISC_DISABLE            wait TCK 16)" &
                "       (BYPASS 1:0     wait TCK 1)," &

        "flow_program(array)    " &
        "Repeat 239922          " &
                "       (ISC_PROGRAM    16:?    wait TCK 1 )," &

        "flow_program(legacy)   " &
        "Initialize             " &
                "       (JSHUTDOWN      wait TCK 16)" &
                "       (CFG_IN 3838752:?       wait TCK 1)" &
                "       (JSTART         wait TCK 32)" &
                "       (BYPASS 1:0     wait TCK 1)," &

        "flow_verify(idcode)    " &
        "initialize             " &
                "       (IDCODE         wait TCK 1      32:01C2E093*0FFFFFFF)," &

        "flow_read(usercode)            " &
        "initialize             " &
                "       (USERCODE       wait TCK 1      32:!)," &

        "flow_read(idcode)      " &
        "initialize             " &
                "       (IDCODE         wait TCK 1      32:!)," &

        "flow_program_done              " &
        "initialize             " &
                "       (BYPASS                         wait TCK 1)," &

        "flow_error_exit                " &
        "initialize             " &
                "       (BYPASS                         wait TCK 1)";

attribute ISC_PROCEDURE of XC3S1200E_FG320 : entity is
        "proc_enable             = (flow_enable)," &
        "proc_disable            = (flow_disable)," &
        "proc_program            = (flow_program(array))," &
        "proc_program(legacy)    = (flow_program(legacy))," &
        "proc_verify(idcode)     = (flow_verify(idcode))," &
        "proc_read(idcode)       = (flow_read(idcode))," &
        "proc_read(usercode)     = (flow_read(usercode))," &
        "proc_program_done       = (flow_program_done)," &
        "proc_error_exit         = (flow_error_exit)";

attribute ISC_ACTION of XC3S1200E_FG320 : entity is
        "program          = (proc_verify(idcode) recommended," &
        "                    proc_enable,  proc_program," &
        "                    proc_disable)," &
        "program(lgcy)    = (proc_verify(idcode) recommended," &
        "                    proc_enable,  proc_program(legacy)," &
        "                    proc_disable)," &
        "verify(idcode)   = (proc_verify(idcode))," &
        "read(idcode)     = (proc_read(idcode))," &
        "read(usercode)   = (proc_read(usercode))";

-- Design Warning Section

attribute DESIGN_WARNING of XC3S1200E_FG320 : entity is
        "This is a preliminary BSDL file which has not been verified." &
        "This BSDL file must be modified by the FPGA designer in order to" &
                "reflect post-configuration behavior (if any)." &
        "To avoid losing the current configuration, the PROG_B should be" &
                "kept high.  If the PROG_B pin goes low by any means," &
                "the configuration will be cleared." &
        "PROG_B can only be captured, not updated." &
                "The value at the pin is always used by the device." &
        "PUDC_B can be captured and updated." &
                "The value at the pin is always used by the device" &
                "before configuration is done." &
        "During pre-configuration, the disable result of a 3-stated" &
                "I/O in this file corresponds to PUDC_B being low" &
                "or during EXTEST instruction." &
        "When PUDC_B is high AND during SAMPLE instruction, change" &
                "all PULL1s to PULL0s." &
        "After configuration, the disable result only depends on" &
                "the individual IO configuration setting." &
        "In EXTEST, output and tristate values are not captured in the" &
                "Capture-DR state - those register cells are unchanged." &
        "In INTEST, the pin input values are not captured in the" &
                "Capture-DR state - those register cells are unchanged." &
        "The output and tristate capture values are not valid until after" &
                "the device is configured." &
        "The tristate control value is not captured properly when" &
                "GTS is activated.";

end XC3S1200E_FG320;

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.