OpenCores
URL https://opencores.org/ocsvn/usb_fpga_2_16/usb_fpga_2_16/trunk

Subversion Repositories usb_fpga_2_16

[/] [usb_fpga_2_16/] [trunk/] [examples/] [usb-fpga-1.2/] [flashdemo/] [flashdemo.c] - Rev 3

Compare with Previous | Blame | View Log

/*!
   flashdemo -- demo for Flash memory access from firmware and host software for ZTEX USB-FPGA Module 1.2
   Copyright (C) 2009-2014 ZTEX GmbH.
   http://www.ztex.de
 
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License version 3 as
   published by the Free Software Foundation.
 
   This program is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
   General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with this program; if not, see http://www.gnu.org/licenses/.
!*/
 
#include[ztex-conf.h]	// Loads the configuration macros, see ztex-conf.h for the available macros
#include[ztex-utils.h]	// include basic functions and variables
 
// select ZTEX USB FPGA Module 1.2 as target
IDENTITY_UFM_1_2(10.11.0.0,0);	 
 
// enable Flash support
ENABLE_FLASH;
 
// this product string is also used for identification by the host software
#define[PRODUCT_STRING]["Flash demo for UFM 1.2"]
 
__code char flash_string[] = "Hello World!";
 
// include the main part of the firmware kit, define the descriptors, ...
#include[ztex.h]
 
void main(void)	
{
    __xdata DWORD sector;
 
    init_USB();						// init everything
 
    if ( flash_enabled ) {
	flash_read_init( 0 ); 				// prepare reading sector 0
	flash_read((__xdata BYTE*) &sector, 4); 	// read the number of last sector 
	flash_read_finish(flash_sector_size - 4);	// dummy-read the rest of the sector + finish read operation
 
	sector++;
	if ( sector > flash_sectors || sector == 0 ) {
	    sector = 1;
	}
 
	flash_write_init( 0 ); 					// prepare writing sector 0
	flash_write((__xdata BYTE*) &sector, 4); 		// write the current sector number
	flash_write_finish_sector(flash_sector_size - 4);	// dummy-write the rest of the sector + CRC
	flash_write_finish();					// finish write operation
 
	flash_write_init( sector ); 						// prepare writing sector sector
	flash_write((__xdata BYTE*) flash_string, sizeof(flash_string)); 	// write the string 
	flash_write_finish_sector(flash_sector_size - sizeof(flash_string));	// dummy-write the rest of the sector + CRC
	flash_write_finish();							// finish write operation
    }
 
    while (1) {	}					//  twiddle thumbs
}
 
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.