Subversion Repositories usb_ft232h_avalon-mm_interface

#ifndef __WINDOWS_TYPES__
#define __WINDOWS_TYPES__
 
#define WINAPI
 
typedef unsigned int            DWORD;
typedef unsigned int            ULONG;
typedef unsigned short            USHORT;
typedef unsigned short            SHORT;
typedef unsigned char            UCHAR;
typedef unsigned short            WORD;
typedef unsigned char            BYTE;
typedef BYTE                    *LPBYTE;
typedef unsigned int            BOOL;
typedef unsigned char            BOOLEAN;
typedef unsigned char            CHAR;
typedef BOOL                    *LPBOOL;
typedef UCHAR                    *PUCHAR;
typedef const char                *LPCSTR;
typedef char                    *PCHAR;
typedef void                    *PVOID;
typedef void                    *HANDLE;
typedef unsigned int            LONG;
typedef int                        INT;
typedef unsigned int            UINT;
typedef char                    *LPSTR;
typedef char                    *LPTSTR;
typedef const char                *LPCTSTR;
typedef DWORD                    *LPDWORD;
typedef WORD                    *LPWORD;
typedef ULONG                    *PULONG;
typedef LONG                    *LPLONG;
typedef PVOID                    LPVOID;
typedef void                    VOID;
typedef unsigned long long int    ULONGLONG;
 
typedef struct _OVERLAPPED {
    DWORD Internal;
    DWORD InternalHigh;
    DWORD Offset;
    DWORD OffsetHigh;
    HANDLE hEvent;
} OVERLAPPED, *LPOVERLAPPED;
 
typedef struct _SECURITY_ATTRIBUTES {
    DWORD nLength;
    LPVOID lpSecurityDescriptor;
    BOOL bInheritHandle;
} SECURITY_ATTRIBUTES , *LPSECURITY_ATTRIBUTES;
 
#include <pthread.h>
// Substitute for HANDLE returned by Windows CreateEvent API.
// FT_SetEventNotification expects parameter 3 to be the address
// of one of these structures.
typedef struct _EVENT_HANDLE
{
    pthread_cond_t  eCondVar;
    pthread_mutex_t eMutex;
    int             iVar;
} EVENT_HANDLE;
 
typedef struct timeval SYSTEMTIME;
typedef struct timeval FILETIME;
#ifndef TRUE
#define TRUE    1
#endif
#ifndef FALSE
#define FALSE    0
#endif
 
//
// Modem Status Flags
//
#define MS_CTS_ON           ((DWORD)0x0010)
#define MS_DSR_ON           ((DWORD)0x0020)
#define MS_RING_ON          ((DWORD)0x0040)
#define MS_RLSD_ON          ((DWORD)0x0080)
 
//
// Error Flags
//
#define CE_RXOVER           0x0001  // Receive Queue overflow
#define CE_OVERRUN          0x0002  // Receive Overrun Error
#define CE_RXPARITY         0x0004  // Receive Parity Error
#define CE_FRAME            0x0008  // Receive Framing error
#define CE_BREAK            0x0010  // Break Detected
#define CE_TXFULL           0x0100  // TX Queue is full
#define CE_PTO              0x0200  // LPTx Timeout
#define CE_IOE              0x0400  // LPTx I/O Error
#define CE_DNS              0x0800  // LPTx Device not selected
#define CE_OOP              0x1000  // LPTx Out-Of-Paper
#define CE_MODE             0x8000  // Requested mode unsupported
 
//
// Events
//
#define EV_RXCHAR           0x0001  // Any Character received
#define EV_RXFLAG           0x0002  // Received certain character
#define EV_TXEMPTY          0x0004  // Transmit Queue Empty
#define EV_CTS              0x0008  // CTS changed state
#define EV_DSR              0x0010  // DSR changed state
#define EV_RLSD             0x0020  // RLSD changed state
#define EV_BREAK            0x0040  // BREAK received
#define EV_ERR              0x0080  // Line status error occurred
#define EV_RING             0x0100  // Ring signal detected
#define EV_PERR             0x0200  // Printer error occured
#define EV_RX80FULL         0x0400  // Receive buffer is 80 percent full
#define EV_EVENT1           0x0800  // Provider specific event 1
#define EV_EVENT2           0x1000  // Provider specific event 2
 
//
// Escape Functions
//
#define SETXOFF             1       // Simulate XOFF received
#define SETXON              2       // Simulate XON received
#define SETRTS              3       // Set RTS high
#define CLRRTS              4       // Set RTS low
#define SETDTR              5       // Set DTR high
#define CLRDTR              6       // Set DTR low
#define RESETDEV            7       // Reset device if possible
#define SETBREAK            8       // Set the device break line.
#define CLRBREAK            9       // Clear the device break line.
 
//
// PURGE function flags.
//
#define PURGE_TXABORT       0x0001  // Kill the pending/current writes to the comm port.
#define PURGE_RXABORT       0x0002  // Kill the pending/current reads to the comm port.
#define PURGE_TXCLEAR       0x0004  // Kill the transmit queue if there.
#define PURGE_RXCLEAR       0x0008  // Kill the typeahead buffer if there.
 
#ifndef INVALID_HANDLE_VALUE
#define INVALID_HANDLE_VALUE 0xFFFFFFFF
#endif
 
#endif /* __WINDOWS_TYPES__ */