Subversion Repositories xge_mac

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  File name "fault_sm.v"                                      ////
////                                                              ////
////  This file is part of the "10GE MAC" project                 ////
////  http://www.opencores.org/cores/xge_mac/                     ////
////                                                              ////
////  Author(s):                                                  ////
////      - A. Tanguay (antanguay@opencores.org)                  ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2008 AUTHORS. All rights reserved.             ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
 
 
`include "defines.v"
 
module fault_sm(/*AUTOARG*/
  // Outputs
  status_local_fault_crx, status_remote_fault_crx,
  // Inputs
  clk_xgmii_rx, reset_xgmii_rx_n, local_fault_msg_det,
  remote_fault_msg_det
  );
 
input         clk_xgmii_rx;
input         reset_xgmii_rx_n;
 
input  [1:0]  local_fault_msg_det;
input  [1:0]  remote_fault_msg_det;
 
output        status_local_fault_crx;
output        status_remote_fault_crx;
 
/*AUTOREG*/
// Beginning of automatic regs (for this module's undeclared outputs)
reg                     status_local_fault_crx;
reg                     status_remote_fault_crx;
// End of automatics
 
reg    [1:0]  curr_state;
 
reg    [7:0]  col_cnt;
reg    [1:0]  fault_sequence;
reg    [1:0]  last_seq_type;
reg    [1:0]  link_fault;
reg    [2:0]  seq_cnt;
reg    [1:0]  seq_type;
 
reg    [1:0]  seq_add;
 
/*AUTOWIRE*/
 
 
parameter [1:0]
             SM_INIT       = 2'd0,
             SM_COUNT      = 2'd1,
             SM_FAULT      = 2'd2,
             SM_NEW_FAULT  = 2'd3;
 
 
always @(/*AS*/local_fault_msg_det or remote_fault_msg_det) begin
 
    //---
    // Fault indication. Indicate remote or local fault
 
    fault_sequence = local_fault_msg_det | remote_fault_msg_det;
 
 
    //---
    // Sequence type, local, remote, or ok
 
    if (|local_fault_msg_det) begin
        seq_type = `LINK_FAULT_LOCAL;
    end
    else if (|remote_fault_msg_det) begin
        seq_type = `LINK_FAULT_REMOTE;
    end
    else begin
        seq_type = `LINK_FAULT_OK;
    end
 
 
    //---
    // Adder for number of faults, if detected in lower 4 lanes and
    // upper 4 lanes, add 2. That's because we process 64-bit at a time
    // instead of typically 32-bit xgmii.
 
    if (|remote_fault_msg_det) begin
        seq_add = remote_fault_msg_det[1] + remote_fault_msg_det[0];
    end
    else begin
        seq_add = local_fault_msg_det[1] + local_fault_msg_det[0];
    end
 
end
 
always @(posedge clk_xgmii_rx or negedge reset_xgmii_rx_n) begin
 
    if (reset_xgmii_rx_n == 1'b0) begin
 
 
        status_local_fault_crx <= 1'b0;
        status_remote_fault_crx <= 1'b0;
 
    end
    else begin
 
        //---
        // Status signal to generate local/remote fault interrupts
 
        status_local_fault_crx <= curr_state == SM_FAULT &&
                                  link_fault == `LINK_FAULT_LOCAL;
 
        status_remote_fault_crx <= curr_state == SM_FAULT &&
                                   link_fault == `LINK_FAULT_REMOTE;
 
    end
 
end
 
always @(posedge clk_xgmii_rx or negedge reset_xgmii_rx_n) begin
 
    if (reset_xgmii_rx_n == 1'b0) begin
 
        curr_state <= SM_INIT;
 
        col_cnt <= 8'b0;
        last_seq_type <= `LINK_FAULT_OK;
        link_fault <= `LINK_FAULT_OK;
        seq_cnt <= 3'b0;
 
    end
    else begin
 
        case (curr_state)
 
          SM_INIT:
            begin
 
                last_seq_type <= seq_type;
 
                if (|fault_sequence) begin
 
                    // If a fault is detected, capture the type of
                    // fault and start column counter. We need 4 fault
                    // messages in 128 columns to accept the fault.
 
                    if (fault_sequence[0]) begin
                        col_cnt <= 8'd2;
                    end
                    else begin
                        col_cnt <= 8'd1;
                    end
                    seq_cnt <= {1'b0, seq_add};
                    curr_state <= SM_COUNT;
 
                end
                else begin
 
                    // If no faults, stay in INIT and clear counters
 
                    col_cnt <= 8'b0;
                    seq_cnt <= 3'b0;
 
                end
            end
 
          SM_COUNT:
            begin
 
                col_cnt <= col_cnt + 8'd2;
                seq_cnt <= seq_cnt + {1'b0, seq_add};
 
                if (!fault_sequence[0] && col_cnt >= 8'd127) begin
 
                    // No new fault in lower lanes and almost
                    // reached the 128 columns count, abort fault. 
 
                    curr_state <= SM_INIT;
 
                end
                else if (col_cnt > 8'd127) begin
 
                    // Reached the 128 columns count, abort fault.
 
                    curr_state <= SM_INIT;
 
                end
                else if (|fault_sequence) begin
 
                    // If fault type has changed, move to NEW_FAULT.
                    // If not, after detecting 4 fault messages move to
                    // FAULT state.
 
                    if (seq_type != last_seq_type) begin
                        curr_state <= SM_NEW_FAULT;
                    end
                    else begin
                        if ((seq_cnt + {1'b0, seq_add}) > 3'd3) begin
                            col_cnt <= 8'b0;
                            link_fault <= seq_type;
                            curr_state <= SM_FAULT;
                        end
                    end
 
                end
            end
 
          SM_FAULT:
            begin
 
                col_cnt <= col_cnt + 8'd2;
 
                if (!fault_sequence[0] && col_cnt >= 8'd127) begin
 
                    // No new fault in lower lanes and almost
                    // reached the 128 columns count, abort fault. 
 
                    curr_state <= SM_INIT;
 
                end
                else if (col_cnt > 8'd127) begin
 
                    // Reached the 128 columns count, abort fault.
 
                    curr_state <= SM_INIT;
 
                end
                else if (|fault_sequence) begin
 
                    // Clear the column count each time we see a fault,
                    // if fault changes, go no next state.
 
                    col_cnt <= 8'd0;
 
                    if (seq_type != last_seq_type) begin
                        curr_state <= SM_NEW_FAULT;
                    end
                end
 
            end
 
          SM_NEW_FAULT:
            begin
 
                // Capture new fault type. Start counters.
 
                col_cnt <= 8'b0;
                last_seq_type <= seq_type;
 
                seq_cnt <= {1'b0, seq_add};
                curr_state <= SM_COUNT;
 
            end
 
        endcase
 
    end
 
end
 
endmodule