OpenCores
URL https://opencores.org/ocsvn/xmatchpro/xmatchpro/trunk

Subversion Repositories xmatchpro

[/] [xmatchpro/] [trunk/] [xmw4-comdec/] [xmatch_sim7/] [src/] [BUFFER_COUNTER_WRITE.vhd] - Rev 9

Compare with Previous | Blame | View Log

--This library is free software; you can redistribute it and/or
--modify it under the terms of the GNU Lesser General Public
--License as published by the Free Software Foundation; either
--version 2.1 of the License, or (at your option) any later version.
 
--This library is distributed in the hope that it will be useful,
--but WITHOUT ANY WARRANTY; without even the implied warranty of
--MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
--Lesser General Public License for more details.
 
--You should have received a copy of the GNU Lesser General Public
--License along with this library; if not, write to the Free Software
--Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 
-- e_mail : j.l.nunez-yanez@byacom.co.uk
 
-------------------------------------------------
--  ENTITY       = BUFFER_COUNTER_WRITE        --
--  version      = 1.0                         --
--  last update  = 30/5/00                     --
--  author       = Jose Nunez                  --
-------------------------------------------------
 
 
-- FUNCTION
-- 8 bit counter for the read and write on dual port ram buffers
 
 
--  PIN LIST
--  ENABLE = enable count 
--  CLEAR = asyncronus clear of the counter
--  CLK   = master clock
--  COUNT = count output
 
 
library ieee,dzx;
use ieee.std_logic_1164.all;
use dzx.bit_arith.all;
use dzx.bit_utils.all; 
 
entity BUFFER_COUNTER_WRITE is
 
port (  ENABLE : in bit;
		SHORT : in bit; -- only write 32 bits
	  CLEAR : in bit;
	  CLEAR_COUNTERS : in bit;
	  CLK : in bit;
	  COUNT : out bit_vector(8 downto 0)
     );
 
end BUFFER_COUNTER_WRITE;
 
architecture STRUCTURAL of BUFFER_COUNTER_WRITE is
 
signal COUNT_AUX : bit_vector(8 downto 0);
 
 
begin
 
 
COUNTING : process (CLK,CLEAR,CLEAR_COUNTERS,ENABLE)
 
begin
    	-- asynchronous RESET signal forces all outputs LOW
      if (CLEAR = '0') then
	    COUNT_AUX <= "000000000";
	    -- check for +ve clock edge
	  elsif ((CLK'event) and (CLK = '1')) then
		   if(CLEAR_COUNTERS = '1') then
			     COUNT_AUX <= "000000000";
	         elsif( ENABLE = '1') then
								if (SHORT = '1') then
	    	          			 COUNT_AUX <= COUNT_AUX+"000000010";
							   else
	    	          			 COUNT_AUX <= COUNT_AUX+"000000001";  -- short enable at zero
								end if;
			 else
			     COUNT_AUX <= COUNT_AUX;
			 end if;
	 end if;
 
end process COUNTING;
 
COUNT <= COUNT_AUX;
 
end STRUCTURAL;

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.