Rev |
Log message |
Author |
Age |
Path |
41 |
The AFCK project upgraded to Vivado 2016.4 |
wzab |
2687d 01h |
/fade_ether_protocol/trunk/ |
40 |
The "jumbo frame version" renamed from "experimental" to "stable". |
wzab |
2687d 06h |
/fade_ether_protocol/trunk/ |
39 |
Added receiver2t4 - program allowing to receive data from 4 links simultaneously |
wzab |
3255d 19h |
/fade_ether_protocol/trunk/ |
38 |
In synthesis scripts added waiting, until bitsream is generated... |
wzab |
3287d 04h |
/fade_ether_protocol/trunk/ |
37 |
Added new design for AFCK board, which uses 8 10 Gbps links.
Additionally added I2C control of the AFCK Si57x based clock.
The I2C controller is driven via VIO blocks controlled by JTAG
interface from Vivado Tcl console.
Tcl scripts are in the fpga/src/AFCK/i2c_tools directory.
To configure clock to 156.25MHz, and to route it to links,
change directory to fpga/src/AFCK/i2c_tools and do
"source start_10g_links.tcl".
After the clock is reprogrammed, reconfigure the FPGA again
(it seems, that there is a problem with reseting links after
clock is reconfigured). |
wzab |
3288d 19h |
/fade_ether_protocol/trunk/ |
36 |
Added signals needed to ensure, that Si570/1 chip generates the clock.
Added signals driving the rate select lines in the SFP+ modules high.
Added two XDC files - the first one for FM-S14 in the FMC1
connector, the second one for FM-S14 in the FMC2 connector. |
wzab |
3304d 21h |
/fade_ether_protocol/trunk/ |
35 |
Changed comment in definition of the descriptor record
Updated IP cores in project for KC705 (to Vivado 2014.4) |
wzab |
3407d 21h |
/fade_ether_protocol/trunk/ |
34 |
The "old stable" version moved to separate directory. |
wzab |
3422d 02h |
/fade_ether_protocol/trunk/ |
33 |
Added script for automatic compilation of FADE for AFCK, using Vivado 2014.4 |
wzab |
3424d 07h |
/fade_ether_protocol/trunk/ |
32 |
Added the 4-channel FADE test implementation for the AFCK board. |
wzab |
3424d 11h |
/fade_ether_protocol/trunk/ |
31 |
Added receiver2t_cmd to the Makefile |
wzab |
3429d 01h |
/fade_ether_protocol/trunk/ |
30 |
Corrected error which slows down handling of user commands (the thread
executing the user command used wait_event_timeout instead of
wait_event_timeout_interruptiple).
Added demo program which tests time of execution of the user's
command. |
wzab |
3429d 01h |
/fade_ether_protocol/trunk/ |
29 |
Fixed two mistakes in mutex management (mutex not unlocked, when function leaved after an error)
Fixed dead URL in comments. |
wzab |
3434d 02h |
/fade_ether_protocol/trunk/ |
28 |
Correction of an obvious mistake in the Linux driver, which lead to deadlock
when two applications (or two threads) tried to open the same FADE device. |
wzab |
3438d 00h |
/fade_ether_protocol/trunk/ |
27 |
Added file fade_one_channel, allowing to implement multiple FADE instances in a single FPGA. |
wzab |
3452d 09h |
/fade_ether_protocol/trunk/ |
26 |
Corrected small bug in CRC update in eth_sender8,vhd
Added counter of retransmitted packets.
Some minor changes in delay update parameters. |
wzab |
3486d 19h |
/fade_ether_protocol/trunk/ |
25 |
Modified the Tcl script for KC705 so, that it automatically runs synthesis, implementation and generates bitstream. |
wzab |
3510d 10h |
/fade_ether_protocol/trunk/ |
24 |
Added build scripts for KC705 (somehow they got omitted in version 22) |
wzab |
3510d 23h |
/fade_ether_protocol/trunk/ |
23 |
Added script allowing for batch compilation of FADE 10G for Atlys.
Just run build_proj_atlys.sh
Removed compilation of receiver2.c (which has been deleted) in the Makefile.
Slightly changed order of operation in the receiver2t.c |
wzab |
3510d 23h |
/fade_ether_protocol/trunk/ |
22 |
Sources reorganized so, that each ".xci" is in a separate directory.
Added script for rebuilding of Vivado project for KC705.
Just run the build_proj_kc705 script, and the project
will be created as kc705_10g3.xpr in the kc705_10g3 drirectory.
You can open it later on in Vivado 2014.3 and build the bitstream. |
wzab |
3511d 00h |
/fade_ether_protocol/trunk/ |