OpenCores
URL https://opencores.org/ocsvn/sdram_controller/sdram_controller/trunk

Subversion Repositories sdram_controller

[/] - Rev 21

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
21 1. Updated testbench to reflect lack of en signal
2. Deleted tarball and replaced it with a project file
and user constraints file		 lynn0p 5351d 06h /
20 Got rid of the en signal, minor changes to eliminate synthesizer warnings. lynn0p 5353d 01h /
19 Fix for the transparent latch warning. Z80 call stack pointer test code
still works.		 lynn0p 5353d 03h /
18 Forgot to update the comments lynn0p 5354d 06h /
17 When I moved the z80 callstack pointer into SDRAM from onchip SRAM,
very hilarious things started to happen. This removes the hilarity and
restores the previous somber mood. Depending on your own design you
may or may not want to update to this revision		 lynn0p 5354d 06h /
16 Removed a redundant cap_en lynn0p 5356d 11h /
15 - Adding a convenience project for building the testbench.
- Must have ISE 11.1 or higher and project is targeted at device type
xc3s500e-4fg320
- Pinouts may be incorrect for other board types. It is your
responsibility to check. Incorrect pinouts can lead to device damage.		 lynn0p 5357d 04h /
14 Changed the clock period in the DCM generic to match 50mhz lynn0p 5357d 07h /
13 Updated the top level testbench to reflect the fact that you need an
external DCM to run the controller with now.		 lynn0p 5357d 08h /
12 1. rolled write recover clocks back to previous value and edited comments
2. increased 200us wait time to 300us in the init module		 lynn0p 5366d 11h /
11 consolidated capture into one process and added comments lynn0p 5367d 07h /
10 Fixes to more glitches uncovered during testing with my T80 SoC. Some
ops were getting dropped on the floor when the controller needed to do
an auto refresh.		 lynn0p 5367d 11h /
9 Got rid of some redundant busy_n <= '0' statements lynn0p 5369d 00h /
8 Changes made to integrate and test with my homebrew SoC design.

1. One DCM has been removed. Now requires a 100mhz clock fed in. Only
consumes one DCM, if you can find a 100mhz clock somewhere.
2. Small timing modifications to fix memory glitches between controller
and the t80 soft cpu I'm using.		 lynn0p 5369d 00h /
7 Reformatted the comments so they fit in 80 columns lynn0p 5377d 05h /
6 changes to reduce synthesizer warnings, removed unused signals, etc. lynn0p 5377d 09h /
5 added header file for ddr.v lynn0p 5378d 05h /
4 added testbench files to trunk lynn0p 5378d 05h /
3 adding LGPLv3 license file lynn0p 5378d 05h /
2 initial checkin lynn0p 5378d 05h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.