OpenCores

URL https://opencores.org/ocsvn/w11/w11/trunk

Subversion Repositories w11

[/] [w11/] [tags/] [w11a_V0.6/] [rtl/] [make/] [generic_xflow.mk] - Rev 24

Details | Compare with Previous | Blame

Filtering Options

Rev	Log message	Author	Age	Path
24	- major release w11a_V0.60 (tagged)	wfjm	3642d 13h	/w11/tags/w11a_V0.6/rtl/make/generic_xflow.mk
22	- interim release w11a_V0.581 (untagged) - new reference system - switched from ISE 13.3 to 14.7. - map/par behaviour changed, unfortunately unfavorably for w11a. On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can be achieved now. - new man pages (in doc/man/man1/) - support for Spartan-6 CMTs in PLL and DCM mode	wfjm	3650d 14h	/w11/tags/w11a_V0.6/rtl/make/generic_xflow.mk
19	- interim release w11a_V0.562 (untagged) - C++ and Tcl based backend server: many support classes for interfacing to w11 system designs, and the associated Tcl bindings. - add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler. - use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs	wfjm	4061d 18h	/w11/tags/w11a_V0.6/rtl/make/generic_xflow.mk
18	- interim release w11a_V0.561 (untagged) - Added simple simulation model of Cypress FX2 and test benches for functional verifcation of FX2 controller - Bugfixes in FX2 firmware and controller, works now also on Nexys3 & Atlys - Added test systems for rlink over USB verification for Nexys3 & Atlys	wfjm	4158d 19h	/w11/tags/w11a_V0.6/rtl/make/generic_xflow.mk
17	- interim release w11a_V0.56 (untagged) - re-organized handling of board and derived clocks in test benches - added message filter definitions for some designs (.mfset files) - added Cypress EZ-USB FX2 controller (USB interface) - added firmware for EZ-USB FX2 supporting jtag access and data transfer - FPGA configure over USB now supported directly in make build flow - added test systems for USB testing and rlink over USB verification - no functional change of w11a CPU core or any pre-existing test systems - Note: Carefully read the disclaimer about usage of USB VID/PID numbers in the file README_USB-VID-PID.txt. You'll be responsible for any misuse of the defaults provided with the project sources !!	wfjm	4162d 14h	/w11/tags/w11a_V0.6/rtl/make/generic_xflow.mk
12	- interim release w11a_V0.531 (untagged) - many small changes to prepare upcoming support for Spartan-6 and usage of Cypress FX2 USB interface on nexys2/3 and atlys boards	wfjm	4640d 15h	/w11/tags/w11a_V0.6/rtl/make/generic_xflow.mk
8	- interim release w11a_V0.51 (untagged) - migrate to ibus protocol verion 2 - nexys2 systems now with DCM derived system clock supported - sys_w11a_n2 now runs with 58 MHz clksys	wfjm	4929d 12h	/w11/tags/w11a_V0.6/rtl/make/generic_xflow.mk
5	additional documentation	wfjm	5057d 16h	/w11/tags/w11a_V0.6/rtl/make/generic_xflow.mk
2	initial source upload (no docs yet)	wfjm	5070d 17h	/w11/tags/w11a_V0.6/rtl/make/generic_xflow.mk

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.