OpenCores
URL https://opencores.org/ocsvn/w11/w11/trunk

Subversion Repositories w11

[/] [w11/] [tags/] [w11a_V0.7/] [tools/] [bin/] [vbomconv] - Rev 33

Rev

Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
33 - major release w11a_V0.70 (tagged) wfjm 3276d 09h /w11/tags/w11a_V0.7/tools/bin/vbomconv
30 - added RH70/RP/RM big disk support
- many cleanups		 wfjm 3314d 09h /w11/tags/w11a_V0.7/tools/bin/vbomconv
29 - added support for Vivado
- added support for Nexys4 and Basys3 boards
- added RL11 disk support
- lots of documentation updated		 wfjm 3380d 06h /w11/tags/w11a_V0.7/tools/bin/vbomconv
25 - The div instruction gave wrong results in some corner cases when either
divisor or quotient were the largest negative integer (100000 or -32768).
This is corrected now, for details see ECO-026-div.txt
- some minor updates and fixes to support scripts
- xtwi usage and XTWI_PATH setup explained in INSTALL.txt		 wfjm 3591d 11h /w11/tags/w11a_V0.7/tools/bin/vbomconv
23 - major release w11a_V0.60 (tagged)
- after 0.581: documentation updates, no functional changes
- from 0.5 -> 0.6:
- revised ibus and rbus protocol; backend server rewritten; Nexys3 port;
Cypress Fx2 support; LP11,PC11 support		 wfjm 3656d 03h /w11/tags/w11a_V0.7/tools/bin/vbomconv
22 - interim release w11a_V0.581 (untagged)
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode		 wfjm 3664d 04h /w11/tags/w11a_V0.7/tools/bin/vbomconv
21 - interim release w11a_V0.58 (untagged)
- C++ and Tcl based backend server now fully functional, supports with
DL11, RK11, LP11 and PC11 all devices available in w11a designs
- the old perl based backend server (pi_rri) is obsolete and removed
- operating system kits reorganized		 wfjm 4046d 06h /w11/tags/w11a_V0.7/tools/bin/vbomconv
17 - interim release w11a_V0.56 (untagged)
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !!		 wfjm 4176d 04h /w11/tags/w11a_V0.7/tools/bin/vbomconv
15 - interim release w11a_V0.54 (untagged)
- add Nexys3 port of w11a		 wfjm 4571d 04h /w11/tags/w11a_V0.7/tools/bin/vbomconv
12 - interim release w11a_V0.531 (untagged)
- many small changes to prepare upcoming support for Spartan-6 and
usage of Cypress FX2 USB interface on nexys2/3 and atlys boards		 wfjm 4654d 05h /w11/tags/w11a_V0.7/tools/bin/vbomconv
2 initial source upload (no docs yet) wfjm 5084d 07h /w11/tags/w11a_V0.7/tools/bin/vbomconv

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.