OpenCores
URL https://opencores.org/ocsvn/w11/w11/trunk

Subversion Repositories w11

[/] [w11/] [tags/] [w11a_V0.6/] [rtl/] [w11a/] - Rev 24

Rev

Filtering Options

Clear current filter

Rev Log message Author Age Path
24 - major release w11a_V0.60 (tagged) wfjm 3628d 15h /w11/tags/w11a_V0.6/rtl/w11a/
22 - interim release w11a_V0.581 (untagged)
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode		 wfjm 3636d 16h /w11/tags/w11a_V0.6/rtl/w11a/
19 - interim release w11a_V0.562 (untagged)
- C++ and Tcl based backend server: many support classes for interfacing to
w11 system designs, and the associated Tcl bindings.
- add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler.
- use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs		 wfjm 4047d 20h /w11/tags/w11a_V0.6/rtl/w11a/
17 - interim release w11a_V0.56 (untagged)
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !!		 wfjm 4148d 16h /w11/tags/w11a_V0.6/rtl/w11a/
16 - interim release w11a_V0.55 (untagged)
- added xon/xoff (software flow control) support to serport library
- added test systems for serport verification
- use new serport stack in sys_w11a_* and sys_tst_rlink_* systems		 wfjm 4525d 02h /w11/tags/w11a_V0.6/rtl/w11a/
13 - interim release w11a_V0.532 (untagged)
- re-organize modules 'human I/O' interface on Digilent boards
- add test designs for 'human I/O' interface for atlys,nexys2, and s3board
- small updates in crc8 and dcm areas
- with one exception all vhdl sources use now numeric_std		 wfjm 4558d 01h /w11/tags/w11a_V0.6/rtl/w11a/
12 - interim release w11a_V0.531 (untagged)
- many small changes to prepare upcoming support for Spartan-6 and
usage of Cypress FX2 USB interface on nexys2/3 and atlys boards		 wfjm 4626d 16h /w11/tags/w11a_V0.6/rtl/w11a/
9 - interim release w11a_V0.52 (untagged)
- migrate to rbus protocol verion 3
- reorganize rbus and rlink modules, many renames		 wfjm 4879d 23h /w11/tags/w11a_V0.6/rtl/w11a/
8 - interim release w11a_V0.51 (untagged)
- migrate to ibus protocol verion 2
- nexys2 systems now with DCM derived system clock supported
- sys_w11a_n2 now runs with 58 MHz clksys		 wfjm 4915d 14h /w11/tags/w11a_V0.6/rtl/w11a/
3 setup all svn:ignore props wfjm 5056d 19h /w11/tags/w11a_V0.6/rtl/w11a/
2 initial source upload (no docs yet) wfjm 5056d 19h /w11/tags/w11a_V0.6/rtl/w11a/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.