OpenCores
URL https://opencores.org/ocsvn/w11/w11/trunk

Subversion Repositories w11

[/] [w11/] [tags/] [w11a_V0.7/] [rtl/] [make_ise/] - Rev 33

Rev

Filtering Options

Clear current filter

Rev Log message Author Age Path
33 - major release w11a_V0.70 (tagged) wfjm 3254d 07h /w11/tags/w11a_V0.7/rtl/make_ise/
30 - added RH70/RP/RM big disk support
- many cleanups
wfjm 3292d 06h /w11/tags/w11a_V0.7/rtl/make_ise/
29 - added support for Vivado
- added support for Nexys4 and Basys3 boards
- added RL11 disk support
- lots of documentation updated
wfjm 3358d 04h /w11/tags/w11a_V0.7/rtl/make_ise/
25 - The div instruction gave wrong results in some corner cases when either
divisor or quotient were the largest negative integer (100000 or -32768).
This is corrected now, for details see ECO-026-div.txt
- some minor updates and fixes to support scripts
- xtwi usage and XTWI_PATH setup explained in INSTALL.txt
wfjm 3569d 08h /w11/tags/w11a_V0.7/rtl/make_ise/
22 - interim release w11a_V0.581 (untagged)
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode
wfjm 3642d 02h /w11/tags/w11a_V0.7/rtl/make_ise/
19 - interim release w11a_V0.562 (untagged)
- C++ and Tcl based backend server: many support classes for interfacing to
w11 system designs, and the associated Tcl bindings.
- add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler.
- use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs
wfjm 4053d 06h /w11/tags/w11a_V0.7/rtl/make_ise/
18 - interim release w11a_V0.561 (untagged)
- Added simple simulation model of Cypress FX2 and test benches for
functional verifcation of FX2 controller
- Bugfixes in FX2 firmware and controller, works now also on Nexys3 & Atlys
- Added test systems for rlink over USB verification for Nexys3 & Atlys
wfjm 4150d 07h /w11/tags/w11a_V0.7/rtl/make_ise/
17 - interim release w11a_V0.56 (untagged)
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !!
wfjm 4154d 02h /w11/tags/w11a_V0.7/rtl/make_ise/
12 - interim release w11a_V0.531 (untagged)
- many small changes to prepare upcoming support for Spartan-6 and
usage of Cypress FX2 USB interface on nexys2/3 and atlys boards
wfjm 4632d 02h /w11/tags/w11a_V0.7/rtl/make_ise/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.