OpenCores

OpenCores

Ethernet by only using xilinx ise

no use

no use

1/1

no use

no use

Ethernet by only using xilinx ise by kssachin1993 on Apr 8, 2017			kssachin1993 Posts: 1 Joined: Oct 27, 2016 Last seen: Apr 9, 2017
Hi i want to interface my sparten 6 board with ethernet , it already have a n ethernet phy with it, it uses a mii interface , can i do this ethernet communication by simply using xilinx ise alone? Hi i want to interface my sparten 6 board with ethernet , it already have a n ethernet phy with it, it uses a mii interface , can i do this ethernet communication by simply using xilinx ise alone?

RE: Ethernet by only using xilinx ise by PZHengwf on May 11, 2017			PZHengwf Posts: 1 Joined: Sep 12, 2015 Last seen: Oct 8, 2018
You Need the PHY Device to bridge your FPGA to the RJ45 connector,then the PC You Need the PHY Device to bridge your FPGA to the RJ45 connector,then the PC

RE: Ethernet by only using xilinx ise by dgisselq on May 14, 2017			dgisselq Posts: 247 Joined: Feb 20, 2015 Last seen: Jul 15, 2022
If you already have an ethernet PHY, you can find an RMII ethernet core <A HREF="https://github.com/ZipCPU/openarty/blob/master/rtl/enetpackets.v">here</A>, as part of the <A HREF="https://github.com/ZipCPU/openarty">openarty</A> project. <BR> Dan If you already have an ethernet PHY, you can find an RMII ethernet core here, as part of the openarty project. Dan

no use

no use

1/1

no use

no use

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.