OpenCores
Home » All forums » Ethernet MAC » Ethernet function for a XILINX SPARTAN3E XC3S1200E + ethernet transceiver DP83848K
no use no use 1/1 no use no use
Ethernet function for a XILINX SPARTAN3E XC3S1200E + ethernet transceiver DP83848K
by YvonR on Sep 15, 2017 		YvonR
Posts: 1
Joined: Sep 15, 2017
Last seen: Sep 19, 2017
Hi all,

We have a board equipped with an FPGA XILINX SPARTAN3E XC3S1200E, in which is implemented a microblaze core runing at 50MHz.

We added an ethernet tranceiver DP83848K on this board and connected it to the FPGA.

What IP core can we use to :
- Drive the DP83848K
- Implement tcp/ip protocols

Thank you.
RE: Ethernet function for a XILINX SPARTAN3E XC3S1200E + ethernet transceiver DP83848K
by Mohame on Sep 16, 2017 		Mohame
Posts: 1
Joined: Apr 25, 2015
Last seen: Sep 16, 2017
Hi,

If your IP core will be added to the SPARTAN3E and you have and AMBA-AHB bus based architecture than you can have a look into the GRLIB Ethernet Media Access Controller.

http://www.gaisler.com/products/grlib/grip.pdf

Good luck.
no use no use 1/1 no use no use
© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.