Subversion Repositories 8051

#!/bin/csh -f

if ( $# < 1 ) then

    echo "First argument must be a top level module name!"

    exit

else

    set SIM_TOP = $1

endif

set current_par = 1

set output_waveform = 0

while ( $current_par < $# )

    @ current_par = $current_par + 1

    case wave:

        @ output_waveform = 1

        breaksw

    default:

        echo 'Unknown option "'$argv[$current_par]'"!'

        exit

        breaksw

    endsw

end

echo "-CDSLIB ../bin/cds.lib"          > ncvlog.args

echo "-HDLVAR ../bin/hdl.var"         >> ncvlog.args

echo "-MESSAGES"                      >> ncvlog.args

echo "-INCDIR ../../../bench/verilog" >> ncvlog.args

echo "-INCDIR ../../../rtl/verilog"   >> ncvlog.args

echo "-NOCOPYRIGHT"                   >> ncvlog.args

echo "-LOGFILE ../log/ncvlog.log"     >> ncvlog.args

echo "../../../bench/verilog/oc8051_tb.v                            " >> ncvlog.args

echo "../../../bench/verilog/oc8051_xram.v                          " >> ncvlog.args

echo "../../../bench/verilog/oc8051_uart_test.v                     " >> ncvlog.args

echo "../../../bench/verilog/oc8051_xrom.v                          " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_top.v                             " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_alu_src_sel.v                     " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_alu.v                             " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_decoder.v                         " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_divide.v                          " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_multiply.v                        " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_memory_interface.v                " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_ram_top.v                         " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_acc.v                             " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_comp.v                            " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_sp.v                              " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_dptr.v                            " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_cy_select.v                       " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_psw.v                             " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_indi_addr.v                       " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_ports.v                           " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_b_register.v                      " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_uart.v                            " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_int.v                             " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_tc.v                              " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_tc2.v                             " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_icache.v                          " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_wb_iinterface.v                   " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_sfr.v                             " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_rom.v                             " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_ram_256x8_two_bist.v              " >> ncvlog.args

echo "../../../rtl/verilog/oc8051_ram_64x32_dual_bist.v             " >> ncvlog.args

echo "../../../../common/generic_memories/rtl/verilog/generic_dpram.v" >> ncvlog.args

ncvlog -f ncvlog.args

echo "-MESSAGES"                             > ncelab.args

echo "-NOCOPYRIGHT"                         >> ncelab.args

echo "-CDSLIB ../bin/cds.lib"               >> ncelab.args

echo "-HDLVAR ../bin/hdl.var"               >> ncelab.args

echo "-LOGFILE ../log/ncelab.log"           >> ncelab.args

echo "-SNAPSHOT worklib.bench:rtl"          >> ncelab.args

echo "-NO_TCHK_MSG"                         >> ncelab.args

echo "-ACCESS +RWC"                         >> ncelab.args

echo worklib.$SIM_TOP                       >> ncelab.args

ncelab -f ncelab.args

echo "-MESSAGES"                   > ncsim.args

echo "-NOCOPYRIGHT"               >> ncsim.args

echo "-CDSLIB ../bin/cds.lib"     >> ncsim.args

echo "-HDLVAR ../bin/hdl.var"     >> ncsim.args

echo "-INPUT ncsim.tcl"           >> ncsim.args

echo "-LOGFILE ../log/ncsim.log"  >> ncsim.args

echo "worklib.bench:rtl"          >> ncsim.args

if ( $output_waveform ) then

    echo "database -open waves -shm -into ../out/waves.shm"             > ./ncsim.tcl

    echo "probe -create -database waves $SIM_TOP -shm -all -depth all" >> ./ncsim.tcl

    echo "run"                                                         >> ./ncsim.tcl

else

    echo "run"  > ./ncsim.tcl

endif

echo "quit" >> ncsim.tcl

ncsim -LICQUEUE -f ./ncsim.args