URL https://opencores.org/ocsvn/8051/8051/trunk

Subversion Repositories 8051

[/] [8051/] [trunk/] [rtl/] [verilog/] [oc8051_sfr.v] - Blame information for rev 134

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  8051 cores sfr top level module                             ////
////                                                              ////
////  This file is part of the 8051 cores project                 ////
////  http://www.opencores.org/cores/8051/                        ////
////                                                              ////
////  Description                                                 ////
////   special function registers for oc8051                      ////
////                                                              ////
////  To Do:                                                      ////
////    nothing                                                   ////
////                                                              ////
////  Author(s):                                                  ////
////      - Simon Teran, simont@opencores.org                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.11  2003/04/25 17:15:51  simont
// change branch instruction execution (reduse needed clock periods).
//
// Revision 1.10  2003/04/10 12:43:19  simont
// defines for pherypherals added
//
// Revision 1.9  2003/04/09 16:24:03  simont
// change wr_sft to 2 bit wire.
//
// Revision 1.8  2003/04/09 15:49:42  simont
// Register oc8051_sfr dato output, add signal wait_data.
//
// Revision 1.7  2003/04/07 14:58:02  simont
// change sfr's interface.
//
// Revision 1.6  2003/04/07 13:29:16  simont
// change uart to meet timing.
//
// Revision 1.5  2003/04/04 10:35:07  simont
// signal prsc_ow added.
//
// Revision 1.4  2003/03/28 17:45:57  simont
// change module name.
//
// Revision 1.3  2003/01/21 13:51:30  simont
// add include oc8051_defines.v
//
// Revision 1.2  2003/01/13 14:14:41  simont
// replace some modules
//
// Revision 1.1  2002/11/05 17:22:27  simont
// initial import
//
//
 
// synopsys translate_off
`include "oc8051_timescale.v"
// synopsys translate_on
 
`include "oc8051_defines.v"
 
 
module oc8051_sfr (rst, clk,
       adr0, adr1, dat0,
       dat1, dat2, bit_in,
       we, wr_bit,
       bit_out,
       wr_sfr, acc,
       ram_wr_sel, ram_rd_sel,
       sp, sp_w,
       bank_sel,
       desAc, desOv,
       srcAc, cy,
       psw_set, rmw,
       comp_sel,
       comp_wait,
 
`ifdef OC8051_PORTS
 
  `ifdef OC8051_PORT0
       p0_out,
       p0_in,
  `endif
 
  `ifdef OC8051_PORT1
       p1_out,
       p1_in,
  `endif
 
  `ifdef OC8051_PORT2
       p2_out,
       p2_in,
  `endif
 
  `ifdef OC8051_PORT3
       p3_out,
       p3_in,
  `endif
 
`endif
 
 
  `ifdef OC8051_UART
       rxd, txd,
  `endif
 
       int_ack, intr,
       int0, int1,
       int_src,
       reti,
 
  `ifdef OC8051_TC01
       t0, t1,
  `endif
 
  `ifdef OC8051_TC2
       t2, t2ex,
  `endif
 
       dptr_hi, dptr_lo,
       wait_data);
 
 
input       rst,        // reset - pin
            clk,        // clock - pin
            we,         // write enable
            bit_in,
            desAc,
            desOv,
            rmw;
input       int_ack,
            int0,
            int1,
            reti,
            wr_bit;
input [1:0] psw_set,
            wr_sfr,
            comp_sel;
input [2:0] ram_rd_sel,
            ram_wr_sel;
input [7:0] adr0,        //address 0 input
            adr1,       //address 1 input
            dat1,       //data 1 input (des1)
            dat2;       //data 2 input (des2)
 
output       bit_out,
             intr,
             srcAc,
             cy,
             wait_data,
             comp_wait;
output [1:0] bank_sel;
output [7:0] dat0,       //data output
             int_src,
             dptr_hi,
             dptr_lo,
             acc;
output [7:0] sp,
             sp_w;
 
// ports
`ifdef OC8051_PORTS
 
`ifdef OC8051_PORT0
input  [7:0] p0_in;
output [7:0] p0_out;
wire   [7:0] p0_data;
`endif
 
`ifdef OC8051_PORT1
input  [7:0] p1_in;
output [7:0] p1_out;
wire   [7:0] p1_data;
`endif
 
`ifdef OC8051_PORT2
input  [7:0] p2_in;
output [7:0] p2_out;
wire   [7:0] p2_data;
`endif
 
`ifdef OC8051_PORT3
input  [7:0] p3_in;
output [7:0] p3_out;
wire   [7:0] p3_data;
`endif
 
`endif
 
 
// serial interface
`ifdef OC8051_UART
input        rxd;
output       txd;
`endif
 
// timer/counter 0,1
`ifdef OC8051_TC01
input        t0, t1;
`endif
 
// timer/counter 2
`ifdef OC8051_TC2
input        t2, t2ex;
`endif
 
reg        bit_out,
           wait_data;
reg [7:0]  dat0,
           adr0_r;
 
reg        wr_bit_r;
reg [2:0]  ram_wr_sel_r;
 
 
wire       p,
           uart_int,
           tf0,
           tf1,
           tr0,
           tr1,
           rclk,
           tclk,
           brate2,
           tc2_int;
 
 
wire [7:0] b_reg,
           psw,
 
`ifdef OC8051_TC2
  // t/c 2
           t2con,
           tl2,
           th2,
           rcap2l,
           rcap2h,
`endif
 
`ifdef OC8051_TC01
  // t/c 0,1
           tmod,
           tl0,
           th0,
           tl1,
           th1,
`endif
 
  // serial interface
`ifdef OC8051_UART
           scon,
           pcon,
           sbuf,
`endif
 
  //interrupt control
           ie,
           tcon,
           ip;
 
 
reg        pres_ow;
reg [3:0]  prescaler;
 
 
assign cy = psw[7];
assign srcAc = psw [6];
 
 
 
//
// accumulator
// ACC
oc8051_acc oc8051_acc1(.clk(clk),
                       .rst(rst),
                       .bit_in(bit_in),
                       .data_in(dat1),
                       .data2_in(dat2),
                       .wr(we),
                       .wr_bit(wr_bit_r),
                       .wr_sfr(wr_sfr),
                       .wr_addr(adr1),
                       .data_out(acc),
                       .p(p));
 
 
//
// b register
// B
oc8051_b_register oc8051_b_register (.clk(clk),
                                     .rst(rst),
                                     .bit_in(bit_in),
                                     .data_in(dat1),
                                     .wr(we),
                                     .wr_bit(wr_bit_r),
                                     .wr_addr(adr1),
                                     .data_out(b_reg));
 
//
//stack pointer
// SP
oc8051_sp oc8051_sp1(.clk(clk),
                     .rst(rst),
                     .ram_rd_sel(ram_rd_sel),
                     .ram_wr_sel(ram_wr_sel),
                     .wr_addr(adr1),
                     .wr(we),
                     .wr_bit(wr_bit_r),
                     .data_in(dat1),
                     .sp_out(sp),
                     .sp_w(sp_w));
 
//
//data pointer
// DPTR, DPH, DPL
oc8051_dptr oc8051_dptr1(.clk(clk),
                         .rst(rst),
                         .addr(adr1),
                         .data_in(dat1),
                         .data2_in(dat2),
                         .wr(we),
                         .wr_bit(wr_bit_r),
                         .data_hi(dptr_hi),
                         .data_lo(dptr_lo),
                         .wr_sfr(wr_sfr));
 
 
//
//program status word
// PSW
oc8051_psw oc8051_psw1 (.clk(clk),
                        .rst(rst),
                        .wr_addr(adr1),
                        .data_in(dat1),
                        .wr(we),
                        .wr_bit(wr_bit_r),
                        .data_out(psw),
                        .p(p),
                        .cy_in(bit_in),
                        .ac_in(desAc),
                        .ov_in(desOv),
                        .set(psw_set),
                        .bank_sel(bank_sel));
 
//
// ports
// P0, P1, P2, P3
`ifdef OC8051_PORTS
  oc8051_ports oc8051_ports1(.clk(clk),
                           .rst(rst),
                           .bit_in(bit_in),
                           .data_in(dat1),
                           .wr(we),
                           .wr_bit(wr_bit_r),
                           .wr_addr(adr1),
 
                `ifdef OC8051_PORT0
                           .p0_out(p0_out),
                           .p0_in(p0_in),
                           .p0_data(p0_data),
                `endif
 
                `ifdef OC8051_PORT1
                           .p1_out(p1_out),
                           .p1_in(p1_in),
                           .p1_data(p1_data),
                `endif
 
                `ifdef OC8051_PORT2
                           .p2_out(p2_out),
                           .p2_in(p2_in),
                           .p2_data(p2_data),
                `endif
 
                `ifdef OC8051_PORT3
                           .p3_out(p3_out),
                           .p3_in(p3_in),
                           .p3_data(p3_data),
                `endif
 
                           .rmw(rmw));
`endif
 
//
// serial interface
// SCON, SBUF
`ifdef OC8051_UART
  oc8051_uart oc8051_uatr1 (.clk(clk),
                            .rst(rst),
                            .bit_in(bit_in),
                            .data_in(dat1),
                            .wr(we),
                            .wr_bit(wr_bit_r),
                            .wr_addr(adr1),
                            .rxd(rxd),
                            .txd(txd),
                // interrupt
                            .intr(uart_int),
                // baud rate sources
                            .brate2(brate2),
                            .t1_ow(tf1),
                            .pres_ow(pres_ow),
                            .rclk(rclk),
                            .tclk(tclk),
                //registers
                            .scon(scon),
                            .pcon(pcon),
                            .sbuf(sbuf));
`else
  assign uart_int = 1'b0;
`endif
 
//
// interrupt control
// IP, IE, TCON
oc8051_int oc8051_int1 (.clk(clk),
                        .rst(rst),
                        .wr_addr(adr1),
                        .bit_in(bit_in),
                        .ack(int_ack),
                        .data_in(dat1),
                        .wr(we),
                        .wr_bit(wr_bit_r),
                        .tf0(tf0),
                        .tf1(tf1),
                        .t2_int(tc2_int),
                        .tr0(tr0),
                        .tr1(tr1),
                        .ie0(int0),
                        .ie1(int1),
                        .uart_int(uart_int),
                        .reti(reti),
                        .intr(intr),
                        .int_vec(int_src),
                        .ie(ie),
                        .tcon(tcon),
                        .ip(ip));
 
 
//
// timer/counter control
// TH0, TH1, TL0, TH1, TMOD
`ifdef OC8051_TC01
  oc8051_tc oc8051_tc1(.clk(clk),
                       .rst(rst),
                       .wr_addr(adr1),
                       .data_in(dat1),
                       .wr(we),
                       .wr_bit(wr_bit_r),
                       .ie0(int0),
                       .ie1(int1),
                       .tr0(tr0),
                       .tr1(tr1),
                       .t0(t0),
                       .t1(t1),
                       .tf0(tf0),
                       .tf1(tf1),
                       .pres_ow(pres_ow),
                       .tmod(tmod),
                       .tl0(tl0),
                       .th0(th0),
                       .tl1(tl1),
                       .th1(th1));
`else
  assign tf0 = 1'b0;
  assign tf1 = 1'b0;
`endif
 
//
// timer/counter 2
// TH2, TL2, RCAPL2L, RCAPL2H, T2CON
`ifdef OC8051_TC2
  oc8051_tc2 oc8051_tc21(.clk(clk),
                         .rst(rst),
                         .wr_addr(adr1),
                         .data_in(dat1),
                         .wr(we),
                         .wr_bit(wr_bit_r),
                         .bit_in(bit_in),
                         .t2(t2),
                         .t2ex(t2ex),
                         .rclk(rclk),
                         .tclk(tclk),
                         .brate2(brate2),
                         .tc2_int(tc2_int),
                         .pres_ow(pres_ow),
                         .t2con(t2con),
                         .tl2(tl2),
                         .th2(th2),
                         .rcap2l(rcap2l),
                         .rcap2h(rcap2h));
`else
  assign tc2_int = 1'b0;
  assign rclk    = 1'b0;
  assign tclk    = 1'b0;
  assign brate2  = 1'b0;
`endif
 
 
 
always @(posedge clk or posedge rst)
  if (rst) begin
    adr0_r <= #1 8'h00;
    ram_wr_sel_r <= #1 3'b000;
    wr_bit_r <= #1 1'b0;
//    wait_data <= #1 1'b0;
  end else begin
    adr0_r <= #1 adr0;
    ram_wr_sel_r <= #1 ram_wr_sel;
    wr_bit_r <= #1 wr_bit;
  end
 
assign comp_wait = !(
                    ((comp_sel==`OC8051_CSS_AZ) &
                       ((wr_sfr==`OC8051_WRS_ACC1) |
                        (wr_sfr==`OC8051_WRS_ACC2) |
                        ((adr1==`OC8051_SFR_ACC) & we & !wr_bit_r) |
                        ((adr1[7:3]==`OC8051_SFR_B_ACC) & we & wr_bit_r))) |
                    ((comp_sel==`OC8051_CSS_CY) &
                       ((|psw_set) |
                        ((adr1==`OC8051_SFR_PSW) & we & !wr_bit_r) |
                        ((adr1[7:3]==`OC8051_SFR_B_PSW) & we & wr_bit_r))) |
                    ((comp_sel==`OC8051_CSS_BIT) &
                       ((adr1[7:3]==adr0[7:3]) & (~&adr1[2:0]) &  we & !wr_bit_r) |
                       ((adr1==adr0) & adr1[7] & we & !wr_bit_r)));
 
 
 
//
//set output in case of address (byte)
always @(posedge clk or posedge rst)
begin
  if (rst) begin
    dat0 <= #1 8'h00;
    wait_data <= #1 1'b0;
  end else if ((wr_sfr==`OC8051_WRS_DPTR) & (adr0==`OC8051_SFR_DPTR_LO)) begin                          //write and read same address
    dat0 <= #1 dat1;
    wait_data <= #1 1'b0;
  end else if (
      (((wr_sfr==`OC8051_WRS_ACC1) & (adr0==`OC8051_SFR_ACC)) |         //write to acc
      ((wr_sfr==`OC8051_WRS_DPTR) & (adr0==`OC8051_SFR_DPTR_LO)) |      //write to dpl
      (adr1[7] & (adr1==adr0) & we & !wr_bit_r) |                       //write and read same address
      (adr1[7] & (adr1[7:3]==adr0[7:3]) & (~&adr0[2:0]) &  we & wr_bit_r) //write bit addressable to read address
      ) & !wait_data) begin
    wait_data <= #1 1'b1;
 
  end else if ((
      ((|psw_set) & (adr0==`OC8051_SFR_PSW)) |
      ((wr_sfr==`OC8051_WRS_ACC2) & (adr0==`OC8051_SFR_ACC)) |  //write to acc
      ((wr_sfr==`OC8051_WRS_DPTR) & (adr0==`OC8051_SFR_DPTR_HI))        //write to dph
      ) & !wait_data) begin
    wait_data <= #1 1'b1;
 
  end else begin
    case (adr0)
      `OC8051_SFR_ACC:          dat0 <= #1 acc;
      `OC8051_SFR_PSW:          dat0 <= #1 psw;
 
`ifdef OC8051_PORTS
  `ifdef OC8051_PORT0
      `OC8051_SFR_P0:           dat0 <= #1 p0_data;
  `endif
 
  `ifdef OC8051_PORT1
      `OC8051_SFR_P1:           dat0 <= #1 p1_data;
  `endif
 
  `ifdef OC8051_PORT2
      `OC8051_SFR_P2:           dat0 <= #1 p2_data;
  `endif
 
  `ifdef OC8051_PORT3
      `OC8051_SFR_P3:           dat0 <= #1 p3_data;
  `endif
`endif
 
      `OC8051_SFR_SP:           dat0 <= #1 sp;
      `OC8051_SFR_B:            dat0 <= #1 b_reg;
      `OC8051_SFR_DPTR_HI:      dat0 <= #1 dptr_hi;
      `OC8051_SFR_DPTR_LO:      dat0 <= #1 dptr_lo;
 
`ifdef OC8051_UART
      `OC8051_SFR_SCON:         dat0 <= #1 scon;
      `OC8051_SFR_SBUF:         dat0 <= #1 sbuf;
      `OC8051_SFR_PCON:         dat0 <= #1 pcon;
`endif
 
`ifdef OC8051_TC01
      `OC8051_SFR_TH0:          dat0 <= #1 th0;
      `OC8051_SFR_TH1:          dat0 <= #1 th1;
      `OC8051_SFR_TL0:          dat0 <= #1 tl0;
      `OC8051_SFR_TL1:          dat0 <= #1 tl1;
      `OC8051_SFR_TMOD:         dat0 <= #1 tmod;
`endif
 
      `OC8051_SFR_IP:           dat0 <= #1 ip;
      `OC8051_SFR_IE:           dat0 <= #1 ie;
      `OC8051_SFR_TCON:         dat0 <= #1 tcon;
 
`ifdef OC8051_TC2
      `OC8051_SFR_RCAP2H:       dat0 <= #1 rcap2h;
      `OC8051_SFR_RCAP2L:       dat0 <= #1 rcap2l;
      `OC8051_SFR_TH2:          dat0 <= #1 th2;
      `OC8051_SFR_TL2:          dat0 <= #1 tl2;
      `OC8051_SFR_T2CON:        dat0 <= #1 t2con;
`endif
 
      default:                  dat0 <= #1 8'h00;
    endcase
    wait_data <= #1 1'b0;
  end
end
 
 
//
//set output in case of address (bit)
always @(posedge clk or posedge rst)
begin
  if (rst)
    bit_out <= #1 1'h0;
  else if (
          ((adr1[7:3]==adr0[7:3]) & (~&adr1[2:0]) &  we & !wr_bit_r) |
          ((wr_sfr==`OC8051_WRS_ACC1) & (adr0[7:3]==`OC8051_SFR_B_ACC))         //write to acc
          )
 
    bit_out <= #1 dat1[adr0[2:0]];
  else if ((adr1==adr0) & we & wr_bit_r)
    bit_out <= #1 bit_in;
  else
    case (adr0[7:3])
      `OC8051_SFR_B_ACC:   bit_out <= #1 acc[adr0[2:0]];
      `OC8051_SFR_B_PSW:   bit_out <= #1 psw[adr0[2:0]];
 
`ifdef OC8051_PORTS
  `ifdef OC8051_PORT0
      `OC8051_SFR_B_P0:    bit_out <= #1 p0_data[adr0[2:0]];
  `endif
 
  `ifdef OC8051_PORT1
      `OC8051_SFR_B_P1:    bit_out <= #1 p1_data[adr0[2:0]];
  `endif
 
  `ifdef OC8051_PORT2
      `OC8051_SFR_B_P2:    bit_out <= #1 p2_data[adr0[2:0]];
  `endif
 
  `ifdef OC8051_PORT3
      `OC8051_SFR_B_P3:    bit_out <= #1 p3_data[adr0[2:0]];
  `endif
`endif
 
      `OC8051_SFR_B_B:     bit_out <= #1 b_reg[adr0[2:0]];
      `OC8051_SFR_B_IP:    bit_out <= #1 ip[adr0[2:0]];
      `OC8051_SFR_B_IE:    bit_out <= #1 ie[adr0[2:0]];
      `OC8051_SFR_B_TCON:  bit_out <= #1 tcon[adr0[2:0]];
 
`ifdef OC8051_UART
      `OC8051_SFR_B_SCON:  bit_out <= #1 scon[adr0[2:0]];
`endif
 
`ifdef OC8051_TC2
      `OC8051_SFR_B_T2CON: bit_out <= #1 t2con[adr0[2:0]];
`endif
 
      default:             bit_out <= #1 1'b0;
    endcase
end
 
always @(posedge clk or posedge rst)
begin
  if (rst) begin
    prescaler <= #1 4'h0;
    pres_ow <= #1 1'b0;
  end else if (prescaler==4'b1011) begin
    prescaler <= #1 4'h0;
    pres_ow <= #1 1'b1;
  end else begin
    prescaler <= #1 prescaler + 4'h1;
    pres_ow <= #1 1'b0;
  end
end
 
endmodule

Line No.	Rev	Author	Line
1	75	simont	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// 8051 cores sfr top level module ////`
4			`//// ////`
5			`//// This file is part of the 8051 cores project ////`
6			`//// http://www.opencores.org/cores/8051/ ////`
7			`//// ////`
8			`//// Description ////`
9			`//// special function registers for oc8051 ////`
10			`//// ////`
11			`//// To Do: ////`
12			`//// nothing ////`
13			`//// ////`
14			`//// Author(s): ////`
15			`//// - Simon Teran, simont@opencores.org ////`
16			`//// ////`
17			`//////////////////////////////////////////////////////////////////////`
18			`//// ////`
19			`//// Copyright (C) 2000 Authors and OPENCORES.ORG ////`
20			`//// ////`
21			`//// This source file may be used and distributed without ////`
22			`//// restriction provided that this copyright statement is not ////`
23			`//// removed from the file and that any derivative work contains ////`
24			`//// the original copyright notice and the associated disclaimer. ////`
25			`//// ////`
26			`//// This source file is free software; you can redistribute it ////`
27			`//// and/or modify it under the terms of the GNU Lesser General ////`
28			`//// Public License as published by the Free Software Foundation; ////`
29			`//// either version 2.1 of the License, or (at your option) any ////`
30			`//// later version. ////`
31			`//// ////`
32			`//// This source is distributed in the hope that it will be ////`
33			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
34			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
35			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
36			`//// details. ////`
37			`//// ////`
38			`//// You should have received a copy of the GNU Lesser General ////`
39			`//// Public License along with this source; if not, download it ////`
40			`//// from http://www.opencores.org/lgpl.shtml ////`
41			`//// ////`
42			`//////////////////////////////////////////////////////////////////////`
43			`//`
44			`// CVS Revision History`
45			`//`
46			`// $Log: not supported by cvs2svn $`
47	134	simont	`// Revision 1.11 2003/04/25 17:15:51 simont`
48			`// change branch instruction execution (reduse needed clock periods).`
49			`//`
50	132	simont	`// Revision 1.10 2003/04/10 12:43:19 simont`
51			`// defines for pherypherals added`
52			`//`
53	120	simont	`// Revision 1.9 2003/04/09 16:24:03 simont`
54			`// change wr_sft to 2 bit wire.`
55			`//`
56	118	simont	`// Revision 1.8 2003/04/09 15:49:42 simont`
57			`// Register oc8051_sfr dato output, add signal wait_data.`
58			`//`
59	117	simont	`// Revision 1.7 2003/04/07 14:58:02 simont`
60			`// change sfr's interface.`
61			`//`
62	116	simont	`// Revision 1.6 2003/04/07 13:29:16 simont`
63			`// change uart to meet timing.`
64			`//`
65	115	simont	`// Revision 1.5 2003/04/04 10:35:07 simont`
66			`// signal prsc_ow added.`
67			`//`
68	113	simont	`// Revision 1.4 2003/03/28 17:45:57 simont`
69			`// change module name.`
70			`//`
71	90	simont	`// Revision 1.3 2003/01/21 13:51:30 simont`
72			`// add include oc8051_defines.v`
73			`//`
74	87	simont	`// Revision 1.2 2003/01/13 14:14:41 simont`
75			`// replace some modules`
76			`//`
77	82	simont	`// Revision 1.1 2002/11/05 17:22:27 simont`
78			`// initial import`
79	75	simont	`//`
80	82	simont	`//`
81	75	simont
82			`// synopsys translate_off`
83			`include "oc8051_timescale.v"
84			`// synopsys translate_on`
85
86	87	simont	`include "oc8051_defines.v"
87	75	simont
88	87	simont
89	120	simont	`module oc8051_sfr (rst, clk,`
90	117	simont	`adr0, adr1, dat0,`
91	120	simont	`dat1, dat2, bit_in,`
92			`we, wr_bit,`
93	117	simont	`bit_out,`
94	120	simont	`wr_sfr, acc,`
95			`ram_wr_sel, ram_rd_sel,`
96			`sp, sp_w,`
97			`bank_sel,`
98			`desAc, desOv,`
99			`srcAc, cy,`
100			`psw_set, rmw,`
101	132	simont	`comp_sel,`
102			`comp_wait,`
103	75	simont
104	120	simont	`ifdef OC8051_PORTS
105	75	simont
106	120	simont	`ifdef OC8051_PORT0
107			`p0_out,`
108			`p0_in,`
109			`endif
110	75	simont
111	120	simont	`ifdef OC8051_PORT1
112			`p1_out,`
113			`p1_in,`
114			`endif
115	75	simont
116	120	simont	`ifdef OC8051_PORT2
117			`p2_out,`
118			`p2_in,`
119			`endif
120	75	simont
121	120	simont	`ifdef OC8051_PORT3
122			`p3_out,`
123			`p3_in,`
124			`endif
125
126			`endif
127
128
129			`ifdef OC8051_UART
130			`rxd, txd,`
131			`endif
132
133			`int_ack, intr,`
134			`int0, int1,`
135			`int_src,`
136			`reti,`
137
138			`ifdef OC8051_TC01
139			`t0, t1,`
140			`endif
141
142			`ifdef OC8051_TC2
143			`t2, t2ex,`
144			`endif
145
146			`dptr_hi, dptr_lo,`
147			`wait_data);`
148
149
150			`input rst, // reset - pin`
151			`clk, // clock - pin`
152			`we, // write enable`
153			`bit_in,`
154			`desAc,`
155			`desOv,`
156			`rmw;`
157			`input int_ack,`
158			`int0,`
159			`int1,`
160			`reti,`
161			`wr_bit;`
162			`input [1:0] psw_set,`
163	132	simont	`wr_sfr,`
164			`comp_sel;`
165	120	simont	`input [2:0] ram_rd_sel,`
166			`ram_wr_sel;`
167			`input [7:0] adr0, //address 0 input`
168			`adr1, //address 1 input`
169			`dat1, //data 1 input (des1)`
170			`dat2; //data 2 input (des2)`
171
172			`output bit_out,`
173			`intr,`
174			`srcAc,`
175			`cy,`
176	132	simont	`wait_data,`
177			`comp_wait;`
178	82	simont	`output [1:0] bank_sel;`
179	120	simont	`output [7:0] dat0, //data output`
180			`int_src,`
181			`dptr_hi,`
182			`dptr_lo,`
183			`acc;`
184			`output [7:0] sp,`
185			`sp_w;`
186	75	simont
187	120	simont	`// ports`
188			`ifdef OC8051_PORTS
189	82	simont
190	120	simont	`ifdef OC8051_PORT0
191			`input [7:0] p0_in;`
192			`output [7:0] p0_out;`
193			`wire [7:0] p0_data;`
194			`endif
195	75	simont
196	120	simont	`ifdef OC8051_PORT1
197			`input [7:0] p1_in;`
198			`output [7:0] p1_out;`
199			`wire [7:0] p1_data;`
200			`endif
201	116	simont
202	120	simont	`ifdef OC8051_PORT2
203			`input [7:0] p2_in;`
204			`output [7:0] p2_out;`
205			`wire [7:0] p2_data;`
206			`endif
207	116	simont
208	120	simont	`ifdef OC8051_PORT3
209			`input [7:0] p3_in;`
210			`output [7:0] p3_out;`
211			`wire [7:0] p3_data;`
212			`endif
213	75	simont
214	120	simont	`endif
215
216
217	116	simont	`// serial interface`
218	120	simont	`ifdef OC8051_UART
219			`input rxd;`
220			`output txd;`
221			`endif
222	116	simont
223	120	simont	`// timer/counter 0,1`
224			`ifdef OC8051_TC01
225			`input t0, t1;`
226			`endif
227	82	simont
228	120	simont	`// timer/counter 2`
229			`ifdef OC8051_TC2
230			`input t2, t2ex;`
231			`endif
232	117	simont
233	120	simont	`reg bit_out,`
234			`wait_data;`
235			`reg [7:0] dat0,`
236			`adr0_r;`
237
238			`reg wr_bit_r;`
239			`reg [2:0] ram_wr_sel_r;`
240
241
242			`wire p,`
243			`uart_int,`
244			`tf0,`
245			`tf1,`
246			`tr0,`
247			`tr1,`
248			`rclk,`
249			`tclk,`
250			`brate2,`
251			`tc2_int;`
252
253
254			`wire [7:0] b_reg,`
255			`psw,`
256
257			`ifdef OC8051_TC2
258			`// t/c 2`
259			`t2con,`
260			`tl2,`
261			`th2,`
262			`rcap2l,`
263			`rcap2h,`
264			`endif
265
266			`ifdef OC8051_TC01
267			`// t/c 0,1`
268			`tmod,`
269			`tl0,`
270			`th0,`
271			`tl1,`
272			`th1,`
273			`endif
274
275			`// serial interface`
276			`ifdef OC8051_UART
277			`scon,`
278			`pcon,`
279			`sbuf,`
280			`endif
281
282			`//interrupt control`
283			`ie,`
284			`tcon,`
285			`ip;`
286
287
288			`reg pres_ow;`
289			`reg [3:0] prescaler;`
290
291
292	75	simont	`assign cy = psw[7];`
293			`assign srcAc = psw [6];`
294
295	82	simont
296
297	75	simont	`//`
298			`// accumulator`
299			`// ACC`
300	120	simont	`oc8051_acc oc8051_acc1(.clk(clk),`
301			`.rst(rst),`
302			`.bit_in(bit_in),`
303			`.data_in(dat1),`
304			`.data2_in(dat2),`
305			`.wr(we),`
306			`.wr_bit(wr_bit_r),`
307			`.wr_sfr(wr_sfr),`
308			`.wr_addr(adr1),`
309			`.data_out(acc),`
310			`.p(p));`
311	75	simont
312
313			`//`
314			`// b register`
315			`// B`
316	120	simont	`oc8051_b_register oc8051_b_register (.clk(clk),`
317			`.rst(rst),`
318			`.bit_in(bit_in),`
319			`.data_in(dat1),`
320			`.wr(we),`
321			`.wr_bit(wr_bit_r),`
322			`.wr_addr(adr1),`
323			`.data_out(b_reg));`
324	75	simont
325			`//`
326			`//stack pointer`
327			`// SP`
328	120	simont	`oc8051_sp oc8051_sp1(.clk(clk),`
329			`.rst(rst),`
330			`.ram_rd_sel(ram_rd_sel),`
331			`.ram_wr_sel(ram_wr_sel),`
332			`.wr_addr(adr1),`
333			`.wr(we),`
334			`.wr_bit(wr_bit_r),`
335			`.data_in(dat1),`
336			`.sp_out(sp),`
337			`.sp_w(sp_w));`
338	75	simont
339			`//`
340			`//data pointer`
341			`// DPTR, DPH, DPL`
342	120	simont	`oc8051_dptr oc8051_dptr1(.clk(clk),`
343			`.rst(rst),`
344			`.addr(adr1),`
345			`.data_in(dat1),`
346			`.data2_in(dat2),`
347			`.wr(we),`
348			`.wr_bit(wr_bit_r),`
349			`.data_hi(dptr_hi),`
350			`.data_lo(dptr_lo),`
351			`.wr_sfr(wr_sfr));`
352	75	simont
353	82	simont
354	75	simont	`//`
355			`//program status word`
356			`// PSW`
357	120	simont	`oc8051_psw oc8051_psw1 (.clk(clk),`
358			`.rst(rst),`
359			`.wr_addr(adr1),`
360			`.data_in(dat1),`
361			`.wr(we),`
362			`.wr_bit(wr_bit_r),`
363			`.data_out(psw),`
364			`.p(p),`
365			`.cy_in(bit_in),`
366			`.ac_in(desAc),`
367			`.ov_in(desOv),`
368			`.set(psw_set),`
369			`.bank_sel(bank_sel));`
370	75	simont
371			`//`
372			`// ports`
373			`// P0, P1, P2, P3`
374	120	simont	`ifdef OC8051_PORTS
375			`oc8051_ports oc8051_ports1(.clk(clk),`
376			`.rst(rst),`
377			`.bit_in(bit_in),`
378			`.data_in(dat1),`
379			`.wr(we),`
380			`.wr_bit(wr_bit_r),`
381			`.wr_addr(adr1),`
382	75	simont
383	120	simont	`ifdef OC8051_PORT0
384			`.p0_out(p0_out),`
385			`.p0_in(p0_in),`
386			`.p0_data(p0_data),`
387			`endif
388
389			`ifdef OC8051_PORT1
390			`.p1_out(p1_out),`
391			`.p1_in(p1_in),`
392			`.p1_data(p1_data),`
393			`endif
394
395			`ifdef OC8051_PORT2
396			`.p2_out(p2_out),`
397			`.p2_in(p2_in),`
398			`.p2_data(p2_data),`
399			`endif
400
401			`ifdef OC8051_PORT3
402			`.p3_out(p3_out),`
403			`.p3_in(p3_in),`
404			`.p3_data(p3_data),`
405			`endif
406
407			`.rmw(rmw));`
408			`endif
409
410	75	simont	`//`
411			`// serial interface`
412			`// SCON, SBUF`
413	120	simont	`ifdef OC8051_UART
414			`oc8051_uart oc8051_uatr1 (.clk(clk),`
415			`.rst(rst),`
416			`.bit_in(bit_in),`
417			`.data_in(dat1),`
418			`.wr(we),`
419			`.wr_bit(wr_bit_r),`
420			`.wr_addr(adr1),`
421			`.rxd(rxd),`
422			`.txd(txd),`
423			`// interrupt`
424			`.intr(uart_int),`
425			`// baud rate sources`
426			`.brate2(brate2),`
427			`.t1_ow(tf1),`
428			`.pres_ow(pres_ow),`
429			`.rclk(rclk),`
430			`.tclk(tclk),`
431			`//registers`
432			`.scon(scon),`
433			`.pcon(pcon),`
434			`.sbuf(sbuf));`
435			`else
436			`assign uart_int = 1'b0;`
437			`endif
438	75	simont
439			`//`
440			`// interrupt control`
441			`// IP, IE, TCON`
442	120	simont	`oc8051_int oc8051_int1 (.clk(clk),`
443			`.rst(rst),`
444			`.wr_addr(adr1),`
445			`.bit_in(bit_in),`
446			`.ack(int_ack),`
447			`.data_in(dat1),`
448			`.wr(we),`
449			`.wr_bit(wr_bit_r),`
450			`.tf0(tf0),`
451			`.tf1(tf1),`
452			`.t2_int(tc2_int),`
453			`.tr0(tr0),`
454			`.tr1(tr1),`
455			`.ie0(int0),`
456			`.ie1(int1),`
457			`.uart_int(uart_int),`
458			`.reti(reti),`
459			`.intr(intr),`
460			`.int_vec(int_src),`
461			`.ie(ie),`
462			`.tcon(tcon),`
463			`.ip(ip));`
464	75	simont
465	82	simont
466	75	simont	`//`
467			`// timer/counter control`
468			`// TH0, TH1, TL0, TH1, TMOD`
469	120	simont	`ifdef OC8051_TC01
470			`oc8051_tc oc8051_tc1(.clk(clk),`
471			`.rst(rst),`
472			`.wr_addr(adr1),`
473			`.data_in(dat1),`
474			`.wr(we),`
475			`.wr_bit(wr_bit_r),`
476			`.ie0(int0),`
477			`.ie1(int1),`
478			`.tr0(tr0),`
479			`.tr1(tr1),`
480			`.t0(t0),`
481			`.t1(t1),`
482			`.tf0(tf0),`
483			`.tf1(tf1),`
484			`.pres_ow(pres_ow),`
485			`.tmod(tmod),`
486			`.tl0(tl0),`
487			`.th0(th0),`
488			`.tl1(tl1),`
489			`.th1(th1));`
490			`else
491			`assign tf0 = 1'b0;`
492			`assign tf1 = 1'b0;`
493			`endif
494	75	simont
495	82	simont	`//`
496			`// timer/counter 2`
497	116	simont	`// TH2, TL2, RCAPL2L, RCAPL2H, T2CON`
498	120	simont	`ifdef OC8051_TC2
499			`oc8051_tc2 oc8051_tc21(.clk(clk),`
500			`.rst(rst),`

Browse

Tools

Subversion Repositories 8051

[/] [8051/] [trunk/] [rtl/] [verilog/] [oc8051_sfr.v] - Blame information for rev 134