1 |
117 |
dilbert57 |
# -------------------------------------------------------------------------- #
|
2 |
|
|
#
|
3 |
|
|
# Copyright (C) 1991-2009 Altera Corporation
|
4 |
|
|
# Your use of Altera Corporation's design tools, logic functions
|
5 |
|
|
# and other software and tools, and its AMPP partner logic
|
6 |
|
|
# functions, and any output files from any of the foregoing
|
7 |
|
|
# (including device programming or simulation files), and any
|
8 |
|
|
# associated documentation or information are expressly subject
|
9 |
|
|
# to the terms and conditions of the Altera Program License
|
10 |
|
|
# Subscription Agreement, Altera MegaCore Function License
|
11 |
|
|
# Agreement, or other applicable license agreement, including,
|
12 |
|
|
# without limitation, that your use is for the sole purpose of
|
13 |
|
|
# programming logic devices manufactured by Altera and sold by
|
14 |
|
|
# Altera or its authorized distributors. Please refer to the
|
15 |
|
|
# applicable agreement for further details.
|
16 |
|
|
#
|
17 |
|
|
# -------------------------------------------------------------------------- #
|
18 |
|
|
#
|
19 |
|
|
# Quartus II
|
20 |
|
|
# Version 9.0 Build 235 06/17/2009 Service Pack 2 SJ Full Version
|
21 |
|
|
# Date created = 17:10:05 March 10, 2010
|
22 |
|
|
#
|
23 |
|
|
# -------------------------------------------------------------------------- #
|
24 |
|
|
#
|
25 |
|
|
# Note:
|
26 |
|
|
#
|
27 |
|
|
# 1) Do not modify this file. This file was generated
|
28 |
|
|
# automatically by the Quartus II software and is used
|
29 |
|
|
# to preserve global assignments across Quartus II versions.
|
30 |
|
|
#
|
31 |
|
|
# -------------------------------------------------------------------------- #
|
32 |
|
|
|
33 |
|
|
set_global_assignment -name PROJECT_SHOW_ENTITY_NAME On
|
34 |
|
|
set_global_assignment -name PROJECT_USE_SIMPLIFIED_NAMES Off
|
35 |
|
|
set_global_assignment -name ENABLE_REDUCED_MEMORY_MODE Off
|
36 |
|
|
set_global_assignment -name VER_COMPATIBLE_DB_DIR export_db
|
37 |
|
|
set_global_assignment -name AUTO_EXPORT_VER_COMPATIBLE_DB Off
|
38 |
|
|
set_global_assignment -name SMART_RECOMPILE Off
|
39 |
|
|
set_global_assignment -name FLOW_DISABLE_ASSEMBLER Off
|
40 |
|
|
set_global_assignment -name FLOW_ENABLE_HC_COMPARE Off
|
41 |
|
|
set_global_assignment -name HC_OUTPUT_DIR hc_output
|
42 |
|
|
set_global_assignment -name SAVE_MIGRATION_INFO_DURING_COMPILATION Off
|
43 |
|
|
set_global_assignment -name FLOW_ENABLE_IO_ASSIGNMENT_ANALYSIS Off
|
44 |
|
|
set_global_assignment -name RUN_FULL_COMPILE_ON_DEVICE_CHANGE On
|
45 |
|
|
set_global_assignment -name FLOW_ENABLE_RTL_VIEWER Off
|
46 |
|
|
set_global_assignment -name READ_OR_WRITE_IN_BYTE_ADDRESS "Use global settings"
|
47 |
|
|
set_global_assignment -name FLOW_HARDCOPY_DESIGN_READINESS_CHECK On
|
48 |
|
|
set_global_assignment -name DEFAULT_HOLD_MULTICYCLE "Same as Multicycle"
|
49 |
|
|
set_global_assignment -name CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS On
|
50 |
|
|
set_global_assignment -name CUT_OFF_READ_DURING_WRITE_PATHS On
|
51 |
|
|
set_global_assignment -name CUT_OFF_IO_PIN_FEEDBACK On
|
52 |
|
|
set_global_assignment -name DO_COMBINED_ANALYSIS Off
|
53 |
|
|
set_global_assignment -name IGNORE_CLOCK_SETTINGS Off
|
54 |
|
|
set_global_assignment -name ANALYZE_LATCHES_AS_SYNCHRONOUS_ELEMENTS On
|
55 |
|
|
set_global_assignment -name ENABLE_RECOVERY_REMOVAL_ANALYSIS Off
|
56 |
|
|
set_global_assignment -name ENABLE_CLOCK_LATENCY Off
|
57 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family ACEX1K
|
58 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family MAX7000B
|
59 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "HardCopy II"
|
60 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family FLEX10KA
|
61 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Stratix IV"
|
62 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Cyclone III"
|
63 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "HardCopy Stratix"
|
64 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family APEX20KE
|
65 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family MAX7000AE
|
66 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family Cyclone
|
67 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "Stratix II GX"
|
68 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family FLEX10K
|
69 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "MAX II"
|
70 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family APEX20KC
|
71 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Arria II GX"
|
72 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "Stratix GX"
|
73 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "HardCopy III"
|
74 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family MAX7000S
|
75 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family FLEX6000
|
76 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "APEX II"
|
77 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family FLEX10KE
|
78 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "Cyclone II"
|
79 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "HardCopy IV"
|
80 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Cyclone III LS"
|
81 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Stratix III"
|
82 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER On -family "Arria GX"
|
83 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family MAX3000A
|
84 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family "Stratix II"
|
85 |
|
|
set_global_assignment -name USE_TIMEQUEST_TIMING_ANALYZER Off -family Stratix
|
86 |
|
|
set_global_assignment -name NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT 10
|
87 |
|
|
set_global_assignment -name NUMBER_OF_DESTINATION_TO_REPORT 10
|
88 |
|
|
set_global_assignment -name NUMBER_OF_PATHS_TO_REPORT 200
|
89 |
|
|
set_global_assignment -name DO_MIN_ANALYSIS Off
|
90 |
|
|
set_global_assignment -name DO_MIN_TIMING Off
|
91 |
|
|
set_global_assignment -name REPORT_IO_PATHS_SEPARATELY Off
|
92 |
|
|
set_global_assignment -name FLOW_ENABLE_TIMING_CONSTRAINT_CHECK Off
|
93 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family ACEX1K
|
94 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family MAX7000B
|
95 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "HardCopy II"
|
96 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family FLEX10KA
|
97 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Stratix IV"
|
98 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Cyclone III"
|
99 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family "HardCopy Stratix"
|
100 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family APEX20KE
|
101 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family MAX7000AE
|
102 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family Cyclone
|
103 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Stratix II GX"
|
104 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family FLEX10K
|
105 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family "MAX II"
|
106 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family APEX20KC
|
107 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Arria II GX"
|
108 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family "Stratix GX"
|
109 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "HardCopy III"
|
110 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family MAX7000S
|
111 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family FLEX6000
|
112 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family "APEX II"
|
113 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family FLEX10KE
|
114 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Cyclone II"
|
115 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "HardCopy IV"
|
116 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Cyclone III LS"
|
117 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Stratix III"
|
118 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Arria GX"
|
119 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family MAX3000A
|
120 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS On -family "Stratix II"
|
121 |
|
|
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS Off -family Stratix
|
122 |
|
|
set_global_assignment -name TIMEQUEST_DO_REPORT_TIMING Off
|
123 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family ACEX1K
|
124 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family MAX7000B
|
125 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "HardCopy II"
|
126 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family FLEX10KA
|
127 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Stratix IV"
|
128 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Cyclone III"
|
129 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "HardCopy Stratix"
|
130 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family APEX20KE
|
131 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family MAX7000AE
|
132 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family Cyclone
|
133 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Stratix II GX"
|
134 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family FLEX10K
|
135 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "MAX II"
|
136 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family APEX20KC
|
137 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Arria II GX"
|
138 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Stratix GX"
|
139 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "HardCopy III"
|
140 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family MAX7000S
|
141 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family FLEX6000
|
142 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "APEX II"
|
143 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family FLEX10KE
|
144 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Cyclone II"
|
145 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "HardCopy IV"
|
146 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Cyclone III LS"
|
147 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL On -family "Stratix III"
|
148 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Arria GX"
|
149 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family MAX3000A
|
150 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family "Stratix II"
|
151 |
|
|
set_global_assignment -name TIMEQUEST_DO_CCPP_REMOVAL Off -family Stratix
|
152 |
|
|
set_global_assignment -name MUX_RESTRUCTURE Auto
|
153 |
|
|
set_global_assignment -name ENABLE_IP_DEBUG Off
|
154 |
|
|
set_global_assignment -name SAVE_DISK_SPACE On
|
155 |
|
|
set_global_assignment -name DISABLE_OCP_HW_EVAL Off
|
156 |
|
|
set_global_assignment -name DEVICE_FILTER_PACKAGE Any
|
157 |
|
|
set_global_assignment -name DEVICE_FILTER_PIN_COUNT Any
|
158 |
|
|
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE Any
|
159 |
|
|
set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL ""
|
160 |
|
|
set_global_assignment -name VERILOG_INPUT_VERSION Verilog_2001
|
161 |
|
|
set_global_assignment -name VHDL_INPUT_VERSION VHDL93
|
162 |
|
|
set_global_assignment -name FAMILY "Stratix II"
|
163 |
|
|
set_global_assignment -name TRUE_WYSIWYG_FLOW Off
|
164 |
|
|
set_global_assignment -name SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES Off
|
165 |
|
|
set_global_assignment -name STATE_MACHINE_PROCESSING Auto
|
166 |
|
|
set_global_assignment -name SAFE_STATE_MACHINE Off
|
167 |
|
|
set_global_assignment -name EXTRACT_VERILOG_STATE_MACHINES On
|
168 |
|
|
set_global_assignment -name EXTRACT_VHDL_STATE_MACHINES On
|
169 |
|
|
set_global_assignment -name IGNORE_VERILOG_INITIAL_CONSTRUCTS Off
|
170 |
|
|
set_global_assignment -name VERILOG_CONSTANT_LOOP_LIMIT 5000
|
171 |
|
|
set_global_assignment -name VERILOG_NON_CONSTANT_LOOP_LIMIT 250
|
172 |
|
|
set_global_assignment -name ADD_PASS_THROUGH_LOGIC_TO_INFERRED_RAMS On
|
173 |
|
|
set_global_assignment -name PARALLEL_SYNTHESIS Off
|
174 |
|
|
set_global_assignment -name DSP_BLOCK_BALANCING Auto
|
175 |
|
|
set_global_assignment -name MAX_BALANCING_DSP_BLOCKS "-1 (Unlimited)"
|
176 |
|
|
set_global_assignment -name NOT_GATE_PUSH_BACK On
|
177 |
|
|
set_global_assignment -name ALLOW_POWER_UP_DONT_CARE On
|
178 |
|
|
set_global_assignment -name REMOVE_REDUNDANT_LOGIC_CELLS Off
|
179 |
|
|
set_global_assignment -name REMOVE_DUPLICATE_REGISTERS On
|
180 |
|
|
set_global_assignment -name IGNORE_CARRY_BUFFERS Off
|
181 |
|
|
set_global_assignment -name IGNORE_CASCADE_BUFFERS Off
|
182 |
|
|
set_global_assignment -name IGNORE_GLOBAL_BUFFERS Off
|
183 |
|
|
set_global_assignment -name IGNORE_ROW_GLOBAL_BUFFERS Off
|
184 |
|
|
set_global_assignment -name IGNORE_LCELL_BUFFERS Off
|
185 |
|
|
set_global_assignment -name MAX7000_IGNORE_LCELL_BUFFERS AUTO
|
186 |
|
|
set_global_assignment -name IGNORE_SOFT_BUFFERS On
|
187 |
|
|
set_global_assignment -name MAX7000_IGNORE_SOFT_BUFFERS Off
|
188 |
|
|
set_global_assignment -name LIMIT_AHDL_INTEGERS_TO_32_BITS Off
|
189 |
|
|
set_global_assignment -name AUTO_GLOBAL_CLOCK_MAX On
|
190 |
|
|
set_global_assignment -name AUTO_GLOBAL_OE_MAX On
|
191 |
|
|
set_global_assignment -name MAX_AUTO_GLOBAL_REGISTER_CONTROLS On
|
192 |
|
|
set_global_assignment -name AUTO_IMPLEMENT_IN_ROM Off
|
193 |
|
|
set_global_assignment -name APEX20K_TECHNOLOGY_MAPPER Lut
|
194 |
|
|
set_global_assignment -name OPTIMIZATION_TECHNIQUE Balanced
|
195 |
|
|
set_global_assignment -name STRATIXII_OPTIMIZATION_TECHNIQUE Balanced
|
196 |
|
|
set_global_assignment -name CYCLONE_OPTIMIZATION_TECHNIQUE Balanced
|
197 |
|
|
set_global_assignment -name CYCLONEII_OPTIMIZATION_TECHNIQUE Balanced
|
198 |
|
|
set_global_assignment -name STRATIX_OPTIMIZATION_TECHNIQUE Balanced
|
199 |
|
|
set_global_assignment -name MAXII_OPTIMIZATION_TECHNIQUE Balanced
|
200 |
|
|
set_global_assignment -name MAX7000_OPTIMIZATION_TECHNIQUE Speed
|
201 |
|
|
set_global_assignment -name APEX20K_OPTIMIZATION_TECHNIQUE Balanced
|
202 |
|
|
set_global_assignment -name MERCURY_OPTIMIZATION_TECHNIQUE Area
|
203 |
|
|
set_global_assignment -name FLEX6K_OPTIMIZATION_TECHNIQUE Area
|
204 |
|
|
set_global_assignment -name FLEX10K_OPTIMIZATION_TECHNIQUE Area
|
205 |
|
|
set_global_assignment -name ALLOW_XOR_GATE_USAGE On
|
206 |
|
|
set_global_assignment -name AUTO_LCELL_INSERTION On
|
207 |
|
|
set_global_assignment -name CARRY_CHAIN_LENGTH 48
|
208 |
|
|
set_global_assignment -name FLEX6K_CARRY_CHAIN_LENGTH 32
|
209 |
|
|
set_global_assignment -name FLEX10K_CARRY_CHAIN_LENGTH 32
|
210 |
|
|
set_global_assignment -name MERCURY_CARRY_CHAIN_LENGTH 48
|
211 |
|
|
set_global_assignment -name STRATIX_CARRY_CHAIN_LENGTH 70
|
212 |
|
|
set_global_assignment -name STRATIXII_CARRY_CHAIN_LENGTH 70
|
213 |
|
|
set_global_assignment -name CASCADE_CHAIN_LENGTH 2
|
214 |
|
|
set_global_assignment -name PARALLEL_EXPANDER_CHAIN_LENGTH 16
|
215 |
|
|
set_global_assignment -name MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH 4
|
216 |
|
|
set_global_assignment -name AUTO_CARRY_CHAINS On
|
217 |
|
|
set_global_assignment -name AUTO_CASCADE_CHAINS On
|
218 |
|
|
set_global_assignment -name AUTO_PARALLEL_EXPANDERS On
|
219 |
|
|
set_global_assignment -name AUTO_OPEN_DRAIN_PINS On
|
220 |
|
|
set_global_assignment -name ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP Off
|
221 |
|
|
set_global_assignment -name AUTO_ROM_RECOGNITION On
|
222 |
|
|
set_global_assignment -name AUTO_RAM_RECOGNITION On
|
223 |
|
|
set_global_assignment -name AUTO_DSP_RECOGNITION On
|
224 |
|
|
set_global_assignment -name AUTO_SHIFT_REGISTER_RECOGNITION Auto
|
225 |
|
|
set_global_assignment -name AUTO_CLOCK_ENABLE_RECOGNITION On
|
226 |
|
|
set_global_assignment -name STRICT_RAM_RECOGNITION Off
|
227 |
|
|
set_global_assignment -name ALLOW_SYNCH_CTRL_USAGE On
|
228 |
|
|
set_global_assignment -name FORCE_SYNCH_CLEAR Off
|
229 |
|
|
set_global_assignment -name AUTO_RAM_BLOCK_BALANCING On
|
230 |
|
|
set_global_assignment -name AUTO_RAM_TO_LCELL_CONVERSION Off
|
231 |
|
|
set_global_assignment -name AUTO_RESOURCE_SHARING Off
|
232 |
|
|
set_global_assignment -name ALLOW_ANY_RAM_SIZE_FOR_RECOGNITION Off
|
233 |
|
|
set_global_assignment -name ALLOW_ANY_ROM_SIZE_FOR_RECOGNITION Off
|
234 |
|
|
set_global_assignment -name ALLOW_ANY_SHIFT_REGISTER_SIZE_FOR_RECOGNITION Off
|
235 |
|
|
set_global_assignment -name MAX7000_FANIN_PER_CELL 100
|
236 |
|
|
set_global_assignment -name USE_LOGICLOCK_CONSTRAINTS_IN_BALANCING On
|
237 |
|
|
set_global_assignment -name MAX_RAM_BLOCKS_M512 "-1 (Unlimited)"
|
238 |
|
|
set_global_assignment -name MAX_RAM_BLOCKS_M4K "-1 (Unlimited)"
|
239 |
|
|
set_global_assignment -name MAX_RAM_BLOCKS_MRAM "-1 (Unlimited)"
|
240 |
|
|
set_global_assignment -name IGNORE_TRANSLATE_OFF_AND_SYNTHESIS_OFF Off
|
241 |
|
|
set_global_assignment -name STRATIXGX_BYPASS_REMAPPING_OF_FORCE_SIGNAL_DETECT_SIGNAL_THRESHOLD_SELECT Off
|
242 |
|
|
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS Off
|
243 |
|
|
set_global_assignment -name SHOW_PARAMETER_SETTINGS_TABLES_IN_SYNTHESIS_REPORT On
|
244 |
|
|
set_global_assignment -name IGNORE_MAX_FANOUT_ASSIGNMENTS Off
|
245 |
|
|
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 2
|
246 |
|
|
set_global_assignment -name OPTIMIZE_POWER_DURING_SYNTHESIS "Normal compilation"
|
247 |
|
|
set_global_assignment -name HDL_MESSAGE_LEVEL Level2
|
248 |
|
|
set_global_assignment -name USE_HIGH_SPEED_ADDER Auto
|
249 |
|
|
set_global_assignment -name NUMBER_OF_REMOVED_REGISTERS_REPORTED 100
|
250 |
|
|
set_global_assignment -name NUMBER_OF_INVERTED_REGISTERS_REPORTED 100
|
251 |
|
|
set_global_assignment -name SYNTH_CLOCK_MUX_PROTECTION On
|
252 |
|
|
set_global_assignment -name SYNTH_GATED_CLOCK_CONVERSION Off
|
253 |
|
|
set_global_assignment -name BLOCK_DESIGN_NAMING Auto
|
254 |
|
|
set_global_assignment -name SYNTH_PROTECT_SDC_CONSTRAINT Off
|
255 |
|
|
set_global_assignment -name SYNTHESIS_EFFORT Auto
|
256 |
|
|
set_global_assignment -name SHIFT_REGISTER_RECOGNITION_ACLR_SIGNAL On
|
257 |
|
|
set_global_assignment -name PRE_MAPPING_RESYNTHESIS Off
|
258 |
|
|
set_global_assignment -name SYNTH_MESSAGE_LEVEL Medium
|
259 |
|
|
set_global_assignment -name ROUTER_TIMING_OPTIMIZATION_LEVEL Normal
|
260 |
|
|
set_global_assignment -name PLACEMENT_EFFORT_MULTIPLIER 1.0
|
261 |
|
|
set_global_assignment -name ROUTER_EFFORT_MULTIPLIER 1.0
|
262 |
|
|
set_global_assignment -name FIT_ATTEMPTS_TO_SKIP 0.0
|
263 |
|
|
set_global_assignment -name ECO_ALLOW_ROUTING_CHANGES Off
|
264 |
|
|
set_global_assignment -name DEVICE AUTO
|
265 |
|
|
set_global_assignment -name BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE Off
|
266 |
|
|
set_global_assignment -name ENABLE_JTAG_BST_SUPPORT Off
|
267 |
|
|
set_global_assignment -name MAX7000_ENABLE_JTAG_BST_SUPPORT On
|
268 |
|
|
set_global_assignment -name RESERVE_NCEO_AFTER_CONFIGURATION "Use as regular IO"
|
269 |
|
|
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "Use as programming pin"
|
270 |
|
|
set_global_assignment -name STRATIXIII_UPDATE_MODE Standard
|
271 |
|
|
set_global_assignment -name STRATIX_UPDATE_MODE Standard
|
272 |
|
|
set_global_assignment -name STRATIXIII_CONFIGURATION_SCHEME "Passive Serial"
|
273 |
|
|
set_global_assignment -name CYCLONEIII_CONFIGURATION_SCHEME "Active Serial"
|
274 |
|
|
set_global_assignment -name STRATIXII_CONFIGURATION_SCHEME "Passive Serial"
|
275 |
|
|
set_global_assignment -name CYCLONEII_CONFIGURATION_SCHEME "Active Serial"
|
276 |
|
|
set_global_assignment -name APEX20K_CONFIGURATION_SCHEME "Passive Serial"
|
277 |
|
|
set_global_assignment -name STRATIX_CONFIGURATION_SCHEME "Passive Serial"
|
278 |
|
|
set_global_assignment -name CYCLONE_CONFIGURATION_SCHEME "Active Serial"
|
279 |
|
|
set_global_assignment -name MERCURY_CONFIGURATION_SCHEME "Passive Serial"
|
280 |
|
|
set_global_assignment -name FLEX6K_CONFIGURATION_SCHEME "Passive Serial"
|
281 |
|
|
set_global_assignment -name FLEX10K_CONFIGURATION_SCHEME "Passive Serial"
|
282 |
|
|
set_global_assignment -name APEXII_CONFIGURATION_SCHEME "Passive Serial"
|
283 |
|
|
set_global_assignment -name USER_START_UP_CLOCK Off
|
284 |
|
|
set_global_assignment -name ENABLE_VREFA_PIN Off
|
285 |
|
|
set_global_assignment -name ENABLE_VREFB_PIN Off
|
286 |
|
|
set_global_assignment -name ALWAYS_ENABLE_INPUT_BUFFERS Off
|
287 |
|
|
set_global_assignment -name ENABLE_ASMI_FOR_FLASH_LOADER Off
|
288 |
|
|
set_global_assignment -name ENABLE_DEVICE_WIDE_RESET Off
|
289 |
|
|
set_global_assignment -name ENABLE_DEVICE_WIDE_OE Off
|
290 |
|
|
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "As output driving ground"
|
291 |
|
|
set_global_assignment -name FLEX10K_ENABLE_LOCK_OUTPUT Off
|
292 |
|
|
set_global_assignment -name ENABLE_INIT_DONE_OUTPUT Off
|
293 |
|
|
set_global_assignment -name RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION "Use as regular IO"
|
294 |
|
|
set_global_assignment -name RESERVE_RDYNBUSY_AFTER_CONFIGURATION "Use as regular IO"
|
295 |
|
|
set_global_assignment -name RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION "Use as regular IO"
|
296 |
|
|
set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "As input tri-stated"
|
297 |
|
|
set_global_assignment -name RESERVE_ASDO_AFTER_CONFIGURATION "Use as regular IO"
|
298 |
|
|
set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "As input tri-stated"
|
299 |
|
|
set_global_assignment -name RESERVE_DATA7_THROUGH_DATA2_AFTER_CONFIGURATION "Use as regular IO"
|
300 |
|
|
set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "As input tri-stated"
|
301 |
|
|
set_global_assignment -name RESERVE_OTHER_AP_PINS_AFTER_CONFIGURATION "Use as regular IO"
|
302 |
|
|
set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "Use as programming pin"
|
303 |
|
|
set_global_assignment -name CRC_ERROR_CHECKING Off
|
304 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "Stratix GX"
|
305 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "HardCopy III"
|
306 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "Cyclone II"
|
307 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "HardCopy II"
|
308 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Stratix IV"
|
309 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "HardCopy IV"
|
310 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Cyclone III LS"
|
311 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Cyclone III"
|
312 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Stratix III"
|
313 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "HardCopy Stratix"
|
314 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Arria GX"
|
315 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "Stratix II GX"
|
316 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family Cyclone
|
317 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "Stratix II"
|
318 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "MAX II"
|
319 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family Stratix
|
320 |
|
|
set_global_assignment -name OPTIMIZE_HOLD_TIMING -value "ALL PATHS" -family "Arria II GX"
|
321 |
|
|
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING Off
|
322 |
|
|
set_global_assignment -name BLOCK_RAM_TO_MLAB_CELL_CONVERSION On
|
323 |
|
|
set_global_assignment -name BLOCK_RAM_AND_MLAB_EQUIVALENT_POWER_UP_CONDITIONS Auto
|
324 |
|
|
set_global_assignment -name BLOCK_RAM_AND_MLAB_EQUIVALENT_PAUSED_READ_CAPABILITIES Care
|
325 |
|
|
set_global_assignment -name PROGRAMMABLE_POWER_TECHNOLOGY_SETTING "Force All Tiles with Failing Timing Paths to High Speed"
|
326 |
|
|
set_global_assignment -name PROGRAMMABLE_POWER_MAXIMUM_HIGH_SPEED_FRACTION_OF_USED_LAB_TILES 1.0
|
327 |
|
|
set_global_assignment -name GUARANTEE_MIN_DELAY_CORNER_IO_ZERO_HOLD_TIME On
|
328 |
|
|
set_global_assignment -name OPTIMIZE_POWER_DURING_FITTING "Normal compilation"
|
329 |
|
|
set_global_assignment -name OPTIMIZE_SSN Off -family "Cyclone III LS"
|
330 |
|
|
set_global_assignment -name OPTIMIZE_SSN Off -family "Cyclone III"
|
331 |
|
|
set_global_assignment -name OPTIMIZE_SSN Off -family "Stratix III"
|
332 |
|
|
set_global_assignment -name OPTIMIZE_SSN Off -family "HardCopy III"
|
333 |
|
|
set_global_assignment -name OPTIMIZE_SSN Off -family "HardCopy IV"
|
334 |
|
|
set_global_assignment -name OPTIMIZE_TIMING "Normal compilation"
|
335 |
|
|
set_global_assignment -name ECO_OPTIMIZE_TIMING Off
|
336 |
|
|
set_global_assignment -name ECO_REGENERATE_REPORT Off
|
337 |
|
|
set_global_assignment -name OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING On
|
338 |
|
|
set_global_assignment -name FIT_ONLY_ONE_ATTEMPT Off
|
339 |
|
|
set_global_assignment -name FINAL_PLACEMENT_OPTIMIZATION Automatically
|
340 |
|
|
set_global_assignment -name FITTER_AGGRESSIVE_ROUTABILITY_OPTIMIZATION Automatically
|
341 |
|
|
set_global_assignment -name SEED 1
|
342 |
|
|
set_global_assignment -name SLOW_SLEW_RATE Off
|
343 |
|
|
set_global_assignment -name PCI_IO Off
|
344 |
|
|
set_global_assignment -name TURBO_BIT On
|
345 |
|
|
set_global_assignment -name WEAK_PULL_UP_RESISTOR Off
|
346 |
|
|
set_global_assignment -name ENABLE_BUS_HOLD_CIRCUITRY Off
|
347 |
|
|
set_global_assignment -name AUTO_GLOBAL_MEMORY_CONTROLS Off
|
348 |
|
|
set_global_assignment -name MIGRATION_CONSTRAIN_CORE_RESOURCES On
|
349 |
|
|
set_global_assignment -name AUTO_PACKED_REGISTERS_STRATIXII AUTO
|
350 |
|
|
set_global_assignment -name AUTO_PACKED_REGISTERS_MAXII AUTO
|
351 |
|
|
set_global_assignment -name AUTO_PACKED_REGISTERS_CYCLONE Auto
|
352 |
|
|
set_global_assignment -name AUTO_PACKED_REGISTERS Off
|
353 |
|
|
set_global_assignment -name AUTO_PACKED_REGISTERS_STRATIX AUTO
|
354 |
|
|
set_global_assignment -name NORMAL_LCELL_INSERT On
|
355 |
|
|
set_global_assignment -name CARRY_OUT_PINS_LCELL_INSERT On
|
356 |
|
|
set_global_assignment -name AUTO_DELAY_CHAINS On
|
357 |
|
|
set_global_assignment -name XSTL_INPUT_ALLOW_SE_BUFFER Off
|
358 |
|
|
set_global_assignment -name TREAT_BIDIR_AS_OUTPUT Off
|
359 |
|
|
set_global_assignment -name AUTO_MERGE_PLLS On
|
360 |
|
|
set_global_assignment -name IGNORE_MODE_FOR_MERGE Off
|
361 |
|
|
set_global_assignment -name AUTO_TURBO_BIT ON
|
362 |
|
|
set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC_FOR_AREA Off
|
363 |
|
|
set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC Off
|
364 |
|
|
set_global_assignment -name PHYSICAL_SYNTHESIS_LOG_FILE Off
|
365 |
|
|
set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION Off
|
366 |
|
|
set_global_assignment -name PHYSICAL_SYNTHESIS_MAP_LOGIC_TO_MEMORY_FOR_AREA Off
|
367 |
|
|
set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING Off
|
368 |
|
|
set_global_assignment -name PHYSICAL_SYNTHESIS_ASYNCHRONOUS_SIGNAL_PIPELINING Off
|
369 |
|
|
set_global_assignment -name IO_PLACEMENT_OPTIMIZATION On
|
370 |
|
|
set_global_assignment -name ALLOW_LVTTL_LVCMOS_INPUT_LEVELS_TO_OVERDRIVE_INPUT_BUFFER Off
|
371 |
|
|
set_global_assignment -name OVERRIDE_DEFAULT_ELECTROMIGRATION_PARAMETERS Off
|
372 |
|
|
set_global_assignment -name FITTER_EFFORT "Auto Fit"
|
373 |
|
|
set_global_assignment -name FITTER_AUTO_EFFORT_DESIRED_SLACK_MARGIN 0ns
|
374 |
|
|
set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT Normal
|
375 |
|
|
set_global_assignment -name ROUTER_LCELL_INSERTION_AND_LOGIC_DUPLICATION AUTO
|
376 |
|
|
set_global_assignment -name ROUTER_REGISTER_DUPLICATION AUTO
|
377 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_CLOCK_FANOUT_WITH_ANALOG_RESET Off
|
378 |
|
|
set_global_assignment -name AUTO_GLOBAL_CLOCK On
|
379 |
|
|
set_global_assignment -name AUTO_GLOBAL_OE On
|
380 |
|
|
set_global_assignment -name AUTO_GLOBAL_REGISTER_CONTROLS On
|
381 |
|
|
set_global_assignment -name FITTER_EARLY_TIMING_ESTIMATE_MODE Realistic
|
382 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_GIGE_UNDER_FULL_DATARATE_RANGE Off
|
383 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_RX_CORECLK_FROM_NON_RX_CLKOUT_SOURCE_IN_DOUBLE_DATA_WIDTH_MODE Off
|
384 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_GIGE_IN_DOUBLE_DATA_WIDTH_MODE Off
|
385 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_PARALLEL_LOOPBACK_IN_DOUBLE_DATA_WIDTH_MODE Off
|
386 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_XAUI_IN_SINGLE_DATA_WIDTH_MODE Off
|
387 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_XAUI_WITH_CORECLK_SELECTED_AT_RATE_MATCHER Off
|
388 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_XAUI_WITH_RX_CORECLK_FROM_NON_TXPLL_SOURCE Off
|
389 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_GIGE_WITH_CORECLK_SELECTED_AT_RATE_MATCHER Off
|
390 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_GIGE_WITHOUT_8B10B Off
|
391 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_GIGE_WITH_RX_CORECLK_FROM_NON_TXPLL_SOURCE Off
|
392 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_POST8B10B_LOOPBACK Off
|
393 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_REVERSE_PARALLEL_LOOPBACK Off
|
394 |
|
|
set_global_assignment -name STRATIXGX_ALLOW_USE_OF_GXB_COUPLED_IOS Off
|
395 |
|
|
set_global_assignment -name GENERATE_GXB_RECONFIG_MIF Off
|
396 |
|
|
set_global_assignment -name GENERATE_GXB_RECONFIG_MIF_WITH_PLL Off
|
397 |
|
|
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_WEAK_PULLUP "As input tri-stated with weak pull-up"
|
398 |
|
|
set_global_assignment -name STOP_AFTER_CONGESTION_MAP Off
|
399 |
|
|
set_global_assignment -name SAVE_INTERMEDIATE_FITTING_RESULTS Off
|
400 |
|
|
set_global_assignment -name ENABLE_HOLD_BACK_OFF On
|
401 |
|
|
set_global_assignment -name CONFIGURATION_VCCIO_LEVEL Auto
|
402 |
|
|
set_global_assignment -name FORCE_CONFIGURATION_VCCIO Off
|
403 |
|
|
set_global_assignment -name SYNCHRONIZER_IDENTIFICATION Off
|
404 |
|
|
set_global_assignment -name ENABLE_BENEFICIAL_SKEW_OPTIMIZATION -value OFF
|
405 |
|
|
set_global_assignment -name OPTIMIZE_FOR_METASTABILITY On
|
406 |
|
|
set_global_assignment -name CRC_ERROR_OPEN_DRAIN Off
|
407 |
|
|
set_global_assignment -name MAX_GLOBAL_CLOCKS_ALLOWED "-1 (Unlimited)"
|
408 |
|
|
set_global_assignment -name MAX_REGIONAL_CLOCKS_ALLOWED "-1 (Unlimited)"
|
409 |
|
|
set_global_assignment -name MAX_PERIPHERY_CLOCKS_ALLOWED "-1 (Unlimited)"
|
410 |
|
|
set_global_assignment -name MAX_CLOCKS_ALLOWED "-1 (Unlimited)"
|
411 |
|
|
set_global_assignment -name ACTIVE_SERIAL_CLOCK FREQ_40MHz
|
412 |
|
|
set_global_assignment -name STRATIXIII_MRAM_COMPATIBILITY On
|
413 |
|
|
set_global_assignment -name FORCE_FITTER_TO_AVOID_PERIPHERY_PLACEMENT_WARNINGS Off
|
414 |
|
|
set_global_assignment -name EDA_SIMULATION_TOOL ""
|
415 |
|
|
set_global_assignment -name EDA_TIMING_ANALYSIS_TOOL ""
|
416 |
|
|
set_global_assignment -name EDA_BOARD_DESIGN_TIMING_TOOL ""
|
417 |
|
|
set_global_assignment -name EDA_BOARD_DESIGN_SYMBOL_TOOL ""
|
418 |
|
|
set_global_assignment -name EDA_BOARD_DESIGN_SIGNAL_INTEGRITY_TOOL ""
|
419 |
|
|
set_global_assignment -name EDA_BOARD_DESIGN_BOUNDARY_SCAN_TOOL ""
|
420 |
|
|
set_global_assignment -name EDA_BOARD_DESIGN_TOOL ""
|
421 |
|
|
set_global_assignment -name EDA_FORMAL_VERIFICATION_TOOL ""
|
422 |
|
|
set_global_assignment -name EDA_RESYNTHESIS_TOOL ""
|
423 |
|
|
set_global_assignment -name ON_CHIP_BITSTREAM_DECOMPRESSION On
|
424 |
|
|
set_global_assignment -name COMPRESSION_MODE Off
|
425 |
|
|
set_global_assignment -name CLOCK_SOURCE Internal
|
426 |
|
|
set_global_assignment -name CONFIGURATION_CLOCK_FREQUENCY "10 MHz"
|
427 |
|
|
set_global_assignment -name CONFIGURATION_CLOCK_DIVISOR 1
|
428 |
|
|
set_global_assignment -name ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE On
|
429 |
|
|
set_global_assignment -name FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE Off
|
430 |
|
|
set_global_assignment -name FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE On
|
431 |
|
|
set_global_assignment -name MAX7000S_JTAG_USER_CODE FFFF
|
432 |
|
|
set_global_assignment -name STRATIX_JTAG_USER_CODE FFFFFFFF
|
433 |
|
|
set_global_assignment -name APEX20K_JTAG_USER_CODE FFFFFFFF
|
434 |
|
|
set_global_assignment -name MERCURY_JTAG_USER_CODE FFFFFFFF
|
435 |
|
|
set_global_assignment -name FLEX10K_JTAG_USER_CODE 7F
|
436 |
|
|
set_global_assignment -name MAX7000_JTAG_USER_CODE FFFFFFFF
|
437 |
|
|
set_global_assignment -name MAX7000_USE_CHECKSUM_AS_USERCODE Off
|
438 |
|
|
set_global_assignment -name USE_CHECKSUM_AS_USERCODE Off
|
439 |
|
|
set_global_assignment -name SECURITY_BIT Off
|
440 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family ACEX1K
|
441 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family MAX7000B
|
442 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "HardCopy II"
|
443 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family FLEX10KA
|
444 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Stratix IV"
|
445 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Cyclone III"
|
446 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "HardCopy Stratix"
|
447 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family APEX20KE
|
448 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family MAX7000AE
|
449 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family Cyclone
|
450 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Stratix II GX"
|
451 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family FLEX10K
|
452 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "MAX II"
|
453 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family APEX20KC
|
454 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Arria II GX"
|
455 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Stratix GX"
|
456 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "HardCopy III"
|
457 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family MAX7000S
|
458 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family FLEX6000
|
459 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "APEX II"
|
460 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family FLEX10KE
|
461 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Cyclone II"
|
462 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "HardCopy IV"
|
463 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Cyclone III LS"
|
464 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Stratix III"
|
465 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Arria GX"
|
466 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family MAX3000A
|
467 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "Stratix II"
|
468 |
|
|
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family Stratix
|
469 |
|
|
set_global_assignment -name CYCLONEIII_CONFIGURATION_DEVICE Auto
|
470 |
|
|
set_global_assignment -name STRATIXII_CONFIGURATION_DEVICE Auto
|
471 |
|
|
set_global_assignment -name APEX20K_CONFIGURATION_DEVICE Auto
|
472 |
|
|
set_global_assignment -name MERCURY_CONFIGURATION_DEVICE Auto
|
473 |
|
|
set_global_assignment -name FLEX6K_CONFIGURATION_DEVICE Auto
|
474 |
|
|
set_global_assignment -name FLEX10K_CONFIGURATION_DEVICE Auto
|
475 |
|
|
set_global_assignment -name CYCLONE_CONFIGURATION_DEVICE Auto
|
476 |
|
|
set_global_assignment -name STRATIX_CONFIGURATION_DEVICE Auto
|
477 |
|
|
set_global_assignment -name APEX20K_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
|
478 |
|
|
set_global_assignment -name STRATIX_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
|
479 |
|
|
set_global_assignment -name MERCURY_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
|
480 |
|
|
set_global_assignment -name FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
|
481 |
|
|
set_global_assignment -name EPROM_USE_CHECKSUM_AS_USERCODE Off
|
482 |
|
|
set_global_assignment -name AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE On
|
483 |
|
|
set_global_assignment -name DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE Off
|
484 |
|
|
set_global_assignment -name GENERATE_TTF_FILE Off
|
485 |
|
|
set_global_assignment -name GENERATE_RBF_FILE Off
|
486 |
|
|
set_global_assignment -name GENERATE_HEX_FILE Off
|
487 |
|
|
set_global_assignment -name HEXOUT_FILE_START_ADDRESS 0
|
488 |
|
|
set_global_assignment -name HEXOUT_FILE_COUNT_DIRECTION Up
|
489 |
|
|
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "As output driving an unspecified signal"
|
490 |
|
|
set_global_assignment -name RELEASE_CLEARS_BEFORE_TRI_STATES Off
|
491 |
|
|
set_global_assignment -name AUTO_RESTART_CONFIGURATION On
|
492 |
|
|
set_global_assignment -name HARDCOPYII_POWER_ON_EXTRA_DELAY Off
|
493 |
|
|
set_global_assignment -name STRATIXII_MRAM_COMPATIBILITY Off
|
494 |
|
|
set_global_assignment -name CYCLONEII_M4K_COMPATIBILITY On
|
495 |
|
|
set_global_assignment -name ENABLE_OCT_DONE Off
|
496 |
|
|
set_global_assignment -name USE_CHECKERED_PATTERN_AS_UNINITIALIZED_RAM_CONTENT Off
|
497 |
|
|
set_global_assignment -name START_TIME 0ns
|
498 |
|
|
set_global_assignment -name SIMULATION_MODE TIMING
|
499 |
|
|
set_global_assignment -name AUTO_USE_SIMULATION_PDB_NETLIST Off
|
500 |
|
|
set_global_assignment -name ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS On
|
501 |
|
|
set_global_assignment -name SETUP_HOLD_DETECTION Off
|
502 |
|
|
set_global_assignment -name SETUP_HOLD_DETECTION_INPUT_REGISTERS_BIDIR_PINS_DISABLED Off
|
503 |
|
|
set_global_assignment -name CHECK_OUTPUTS Off
|
504 |
|
|
set_global_assignment -name SIMULATION_COVERAGE On
|
505 |
|
|
set_global_assignment -name SIMULATION_COMPLETE_COVERAGE_REPORT_PANEL On
|
506 |
|
|
set_global_assignment -name SIMULATION_MISSING_1_VALUE_COVERAGE_REPORT_PANEL On
|
507 |
|
|
set_global_assignment -name SIMULATION_MISSING_0_VALUE_COVERAGE_REPORT_PANEL On
|
508 |
|
|
set_global_assignment -name GLITCH_DETECTION Off
|
509 |
|
|
set_global_assignment -name GLITCH_INTERVAL 1ns
|
510 |
|
|
set_global_assignment -name SIMULATOR_GENERATE_SIGNAL_ACTIVITY_FILE Off
|
511 |
|
|
set_global_assignment -name SIMULATION_WITH_GLITCH_FILTERING_WHEN_GENERATING_SAF On
|
512 |
|
|
set_global_assignment -name SIMULATION_BUS_CHANNEL_GROUPING Off
|
513 |
|
|
set_global_assignment -name SIMULATION_VDB_RESULT_FLUSH On
|
514 |
|
|
set_global_assignment -name VECTOR_COMPARE_TRIGGER_MODE INPUT_EDGE
|
515 |
|
|
set_global_assignment -name SIMULATION_NETLIST_VIEWER Off
|
516 |
|
|
set_global_assignment -name SIMULATION_INTERCONNECT_DELAY_MODEL_TYPE TRANSPORT
|
517 |
|
|
set_global_assignment -name SIMULATION_CELL_DELAY_MODEL_TYPE TRANSPORT
|
518 |
|
|
set_global_assignment -name SIMULATOR_GENERATE_POWERPLAY_VCD_FILE Off
|
519 |
|
|
set_global_assignment -name SIMULATOR_PVT_TIMING_MODEL_TYPE AUTO
|
520 |
|
|
set_global_assignment -name SIMULATION_WITH_AUTO_GLITCH_FILTERING AUTO
|
521 |
|
|
set_global_assignment -name DRC_TOP_FANOUT 50
|
522 |
|
|
set_global_assignment -name DRC_FANOUT_EXCEEDING 30
|
523 |
|
|
set_global_assignment -name DRC_GATED_CLOCK_FEED 30
|
524 |
|
|
set_global_assignment -name HARDCOPY_FLOW_AUTOMATION MIGRATION_ONLY
|
525 |
|
|
set_global_assignment -name ENABLE_DRC_SETTINGS Off
|
526 |
|
|
set_global_assignment -name CLK_RULE_CLKNET_CLKSPINES_THRESHOLD 25
|
527 |
|
|
set_global_assignment -name DRC_DETAIL_MESSAGE_LIMIT 10
|
528 |
|
|
set_global_assignment -name DRC_VIOLATION_MESSAGE_LIMIT 30
|
529 |
|
|
set_global_assignment -name DRC_DEADLOCK_STATE_LIMIT 2
|
530 |
|
|
set_global_assignment -name MERGE_HEX_FILE Off
|
531 |
|
|
set_global_assignment -name GENERATE_SVF_FILE Off
|
532 |
|
|
set_global_assignment -name GENERATE_ISC_FILE Off
|
533 |
|
|
set_global_assignment -name GENERATE_JAM_FILE Off
|
534 |
|
|
set_global_assignment -name GENERATE_JBC_FILE Off
|
535 |
|
|
set_global_assignment -name GENERATE_JBC_FILE_COMPRESSED On
|
536 |
|
|
set_global_assignment -name GENERATE_CONFIG_SVF_FILE Off
|
537 |
|
|
set_global_assignment -name GENERATE_CONFIG_ISC_FILE Off
|
538 |
|
|
set_global_assignment -name GENERATE_CONFIG_JAM_FILE Off
|
539 |
|
|
set_global_assignment -name GENERATE_CONFIG_JBC_FILE Off
|
540 |
|
|
set_global_assignment -name GENERATE_CONFIG_JBC_FILE_COMPRESSED On
|
541 |
|
|
set_global_assignment -name GENERATE_CONFIG_HEXOUT_FILE Off
|
542 |
|
|
set_global_assignment -name ISP_CLAMP_STATE_DEFAULT "Tri-state"
|
543 |
|
|
set_global_assignment -name SIGNALPROBE_ALLOW_OVERUSE Off
|
544 |
|
|
set_global_assignment -name SIGNALPROBE_DURING_NORMAL_COMPILATION Off
|
545 |
|
|
set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT Off
|
546 |
|
|
set_global_assignment -name POWER_DEFAULT_TOGGLE_RATE 12.5%
|
547 |
|
|
set_global_assignment -name POWER_DEFAULT_INPUT_IO_TOGGLE_RATE 12.5%
|
548 |
|
|
set_global_assignment -name POWER_USE_PVA On
|
549 |
|
|
set_global_assignment -name POWER_USE_INPUT_FILE "No File"
|
550 |
|
|
set_global_assignment -name POWER_USE_INPUT_FILES Off
|
551 |
|
|
set_global_assignment -name POWER_VCD_FILTER_GLITCHES On
|
552 |
|
|
set_global_assignment -name POWER_REPORT_SIGNAL_ACTIVITY Off
|
553 |
|
|
set_global_assignment -name POWER_REPORT_POWER_DISSIPATION Off
|
554 |
|
|
set_global_assignment -name POWER_USE_DEVICE_CHARACTERISTICS TYPICAL
|
555 |
|
|
set_global_assignment -name POWER_AUTO_COMPUTE_TJ On
|
556 |
|
|
set_global_assignment -name POWER_TJ_VALUE 25
|
557 |
|
|
set_global_assignment -name POWER_USE_TA_VALUE 25
|
558 |
|
|
set_global_assignment -name POWER_USE_CUSTOM_COOLING_SOLUTION Off
|
559 |
|
|
set_global_assignment -name POWER_BOARD_TEMPERATURE 25
|
560 |
|
|
set_global_assignment -name INCREMENTAL_COMPILATION FULL_INCREMENTAL_COMPILATION
|
561 |
|
|
set_global_assignment -name AUTO_EXPORT_INCREMENTAL_COMPILATION Off
|
562 |
|
|
set_global_assignment -name INCREMENTAL_COMPILATION_EXPORT_NETLIST_TYPE POST_FIT
|
563 |
|
|
set_global_assignment -name OUTPUT_IO_TIMING_ENDPOINT "Near End"
|
564 |
|
|
set_global_assignment -name RTLV_REMOVE_FANOUT_FREE_REGISTERS On
|
565 |
|
|
set_global_assignment -name RTLV_SIMPLIFIED_LOGIC On
|
566 |
|
|
set_global_assignment -name RTLV_GROUP_RELATED_NODES On
|
567 |
|
|
set_global_assignment -name RTLV_GROUP_COMB_LOGIC_IN_CLOUD Off
|
568 |
|
|
set_global_assignment -name RTLV_GROUP_COMB_LOGIC_IN_CLOUD_TMV Off
|
569 |
|
|
set_global_assignment -name RTLV_GROUP_RELATED_NODES_TMV On
|
570 |
|
|
set_global_assignment -name EQC_CONSTANT_DFF_DETECTION On
|
571 |
|
|
set_global_assignment -name EQC_DUPLICATE_DFF_DETECTION On
|
572 |
|
|
set_global_assignment -name EQC_BBOX_MERGE On
|
573 |
|
|
set_global_assignment -name EQC_LVDS_MERGE On
|
574 |
|
|
set_global_assignment -name EQC_RAM_UNMERGING On
|
575 |
|
|
set_global_assignment -name EQC_DFF_SS_EMULATION On
|
576 |
|
|
set_global_assignment -name EQC_RAM_REGISTER_UNPACK On
|
577 |
|
|
set_global_assignment -name EQC_MAC_REGISTER_UNPACK On
|
578 |
|
|
set_global_assignment -name EQC_SET_PARTITION_BB_TO_VCC_GND On
|
579 |
|
|
set_global_assignment -name EQC_STRUCTURE_MATCHING On
|
580 |
|
|
set_global_assignment -name EQC_AUTO_BREAK_CONE On
|
581 |
|
|
set_global_assignment -name EQC_POWER_UP_COMPARE Off
|
582 |
|
|
set_global_assignment -name EQC_AUTO_COMP_LOOP_CUT On
|
583 |
|
|
set_global_assignment -name EQC_AUTO_INVERSION On
|
584 |
|
|
set_global_assignment -name EQC_AUTO_TERMINATE On
|
585 |
|
|
set_global_assignment -name EQC_SUB_CONE_REPORT Off
|
586 |
|
|
set_global_assignment -name EQC_RENAMING_RULES On
|
587 |
|
|
set_global_assignment -name EQC_PARAMETER_CHECK On
|
588 |
|
|
set_global_assignment -name EQC_AUTO_PORTSWAP On
|
589 |
|
|
set_global_assignment -name EQC_DETECT_DONT_CARES On
|
590 |
|
|
set_global_assignment -name EQC_SHOW_ALL_MAPPED_POINTS Off
|
591 |
|
|
set_global_assignment -name DUTY_CYCLE 50 -section_id ?
|
592 |
|
|
set_global_assignment -name INVERT_BASE_CLOCK Off -section_id ?
|
593 |
|
|
set_global_assignment -name MULTIPLY_BASE_CLOCK_PERIOD_BY 1 -section_id ?
|
594 |
|
|
set_global_assignment -name DIVIDE_BASE_CLOCK_PERIOD_BY 1 -section_id ?
|
595 |
|
|
set_global_assignment -name EDA_INPUT_GND_NAME GND -section_id ?
|
596 |
|
|
set_global_assignment -name EDA_INPUT_VCC_NAME VCC -section_id ?
|
597 |
|
|
set_global_assignment -name EDA_INPUT_DATA_FORMAT NONE -section_id ?
|
598 |
|
|
set_global_assignment -name EDA_SHOW_LMF_MAPPING_MESSAGES Off -section_id ?
|
599 |
|
|
set_global_assignment -name EDA_RUN_TOOL_AUTOMATICALLY Off -section_id ?
|
600 |
|
|
set_global_assignment -name RESYNTHESIS_RETIMING FULL -section_id ?
|
601 |
|
|
set_global_assignment -name RESYNTHESIS_OPTIMIZATION_EFFORT Normal -section_id ?
|
602 |
|
|
set_global_assignment -name RESYNTHESIS_PHYSICAL_SYNTHESIS Normal -section_id ?
|
603 |
|
|
set_global_assignment -name USE_GENERATED_PHYSICAL_CONSTRAINTS On -section_id ?
|
604 |
|
|
set_global_assignment -name VCCPD_VOLTAGE 3.3V -section_id ?
|
605 |
|
|
set_global_assignment -name EDA_USER_COMPILED_SIMULATION_LIBRARY_DIRECTORY "" -section_id ?
|
606 |
|
|
set_global_assignment -name EDA_LAUNCH_CMD_LINE_TOOL Off -section_id ?
|
607 |
|
|
set_global_assignment -name EDA_NATIVELINK_GENERATE_SCRIPT_ONLY Off -section_id ?
|
608 |
|
|
set_global_assignment -name EDA_WAIT_FOR_GUI_TOOL_COMPLETION Off -section_id ?
|
609 |
|
|
set_global_assignment -name EDA_TRUNCATE_LONG_HIERARCHY_PATHS Off -section_id ?
|
610 |
|
|
set_global_assignment -name EDA_FLATTEN_BUSES Off -section_id ?
|
611 |
|
|
set_global_assignment -name EDA_MAP_ILLEGAL_CHARACTERS Off -section_id ?
|
612 |
|
|
set_global_assignment -name EDA_GENERATE_TIMING_CLOSURE_DATA Off -section_id ?
|
613 |
|
|
set_global_assignment -name EDA_GENERATE_POWER_INPUT_FILE Off -section_id ?
|
614 |
|
|
set_global_assignment -name EDA_TEST_BENCH_ENABLE_STATUS NOT_USED -section_id ?
|
615 |
|
|
set_global_assignment -name EDA_RTL_SIM_MODE NOT_USED -section_id ?
|
616 |
|
|
set_global_assignment -name EDA_MAINTAIN_DESIGN_HIERARCHY Off -section_id ?
|
617 |
|
|
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST Off -section_id ?
|
618 |
|
|
set_global_assignment -name EDA_WRITE_DEVICE_CONTROL_PORTS Off -section_id ?
|
619 |
|
|
set_global_assignment -name EDA_SIMULATION_VCD_OUTPUT_TCL_FILE Off -section_id ?
|
620 |
|
|
set_global_assignment -name EDA_SIMULATION_VCD_OUTPUT_SIGNALS_TO_TCL_FILE "All Except Combinational Logic Element Outputs" -section_id ?
|
621 |
|
|
set_global_assignment -name EDA_ENABLE_GLITCH_FILTERING Off -section_id ?
|
622 |
|
|
set_global_assignment -name EDA_WRITE_NODES_FOR_POWER_ESTIMATION OFF -section_id ?
|
623 |
|
|
set_global_assignment -name EDA_SETUP_HOLD_DETECTION_INPUT_REGISTERS_BIDIR_PINS_DISABLED Off -section_id ?
|
624 |
|
|
set_global_assignment -name EDA_WRITER_DONT_WRITE_TOP_ENTITY Off -section_id ?
|
625 |
|
|
set_global_assignment -name EDA_VHDL_ARCH_NAME structure -section_id ?
|
626 |
|
|
set_global_assignment -name EDA_IBIS_MODEL_SELECTOR Off -section_id ?
|
627 |
|
|
set_global_assignment -name EDA_IBIS_MUTUAL_COUPLING Off -section_id ?
|
628 |
|
|
set_global_assignment -name EDA_FORMAL_VERIFICATION_ALLOW_RETIMING Off -section_id ?
|
629 |
|
|
set_global_assignment -name EDA_BOARD_BOUNDARY_SCAN_OPERATION PRE_CONFIG -section_id ?
|
630 |
|
|
set_global_assignment -name EDA_GENERATE_RTL_SIMULATION_COMMAND_SCRIPT Off -section_id ?
|
631 |
|
|
set_global_assignment -name EDA_GENERATE_GATE_LEVEL_SIMULATION_COMMAND_SCRIPT Off -section_id ?
|
632 |
|
|
set_global_assignment -name SIM_VECTOR_COMPARED_CLOCK_OFFSET 0ns -section_id ?
|
633 |
|
|
set_global_assignment -name SIM_VECTOR_COMPARED_CLOCK_DUTY_CYCLE 50 -section_id ?
|
634 |
|
|
set_global_assignment -name APEX20K_CLIQUE_TYPE LAB -section_id ? -entity ?
|
635 |
|
|
set_global_assignment -name MAX7K_CLIQUE_TYPE LAB -section_id ? -entity ?
|
636 |
|
|
set_global_assignment -name MERCURY_CLIQUE_TYPE LAB -section_id ? -entity ?
|
637 |
|
|
set_global_assignment -name FLEX6K_CLIQUE_TYPE LAB -section_id ? -entity ?
|
638 |
|
|
set_global_assignment -name FLEX10K_CLIQUE_TYPE LAB -section_id ? -entity ?
|
639 |
|
|
set_global_assignment -name PARTITION_IMPORT_ASSIGNMENTS On -section_id ? -entity ?
|
640 |
|
|
set_global_assignment -name PARTITION_IMPORT_EXISTING_ASSIGNMENTS REPLACE_CONFLICTING -section_id ? -entity ?
|
641 |
|
|
set_global_assignment -name PARTITION_IMPORT_EXISTING_LOGICLOCK_REGIONS REPLACE_CONFLICTING -section_id ? -entity ?
|
642 |
|
|
set_global_assignment -name PARTITION_IMPORT_PROMOTE_ASSIGNMENTS On -section_id ? -entity ?
|