OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] [rtl/] [System09_Trenz_TE0141/] [fep_toplevel.vhd] - Blame information for rev 130

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 105 davidgb
-- SECD Front End Processor derived from System09 written by John E. Kent
2
-- This core adheres to the GNU public license  
3
 
4
library ieee;
5
use ieee.std_logic_1164.all;
6
use IEEE.STD_LOGIC_ARITH.ALL;
7
use IEEE.STD_LOGIC_UNSIGNED.ALL;
8
use ieee.numeric_std.all;
9
--use config.all;
10
 
11
entity secd_fep_trenz is
12
  port(
13
    utmi_clkout      : in  Std_Logic;  -- UTMI Clock input
14
    utmi_databus16_8 : out Std_Logic;  -- UTMI configuration input
15
 
16
    reset_sw    : in  Std_logic;  -- Master Reset input (active low)
17
 
18
    -- PS/2 Keyboard
19
    ps2_clk1    : inout Std_logic;
20
    ps2_data1   : inout Std_Logic;
21
 
22
    -- Uart Interface
23
    fpga_rxd    : in  Std_Logic;
24
    fpga_txd    : out Std_Logic;
25
    fpga_cts    : in  Std_Logic;
26
    fpga_rts    : out Std_Logic;
27
 
28
    -- CRTC output signals
29
    vsync_b     : out Std_Logic;
30
    hsync_b     : out Std_Logic;
31
    fpga_b      : out Std_Logic_Vector(2 downto 0);
32
    fpga_g      : out Std_Logic_Vector(2 downto 0);
33
    fpga_r      : out Std_Logic_Vector(2 downto 0);
34
 
35
    -- LEDS & Switches
36
    mm_led      : out Std_Logic;
37
    led         : out Std_Logic_Vector(3 downto 0);
38
 
39
    joy_down    : in Std_Logic;
40
    joy_fire    : in Std_Logic;
41
    joy_left    : in Std_Logic;
42
    joy_right   : in Std_Logic;
43
    joy_up      : in Std_Logic;
44
 
45
    -- LCD Display
46
    lcd_e       : out Std_Logic;
47
    lcd_rw      : out Std_Logic;
48
    lcd_rs      : out Std_Logic;
49
    lcd_d       : out Std_Logic_Vector(3 downto 0);
50
 
51
    -- Audio
52
    aud_out     : out std_logic_vector(4 downto 1);
53
 
54
    -- Memory interface
55
    ram_a       : out std_logic_vector(20 downto 1);
56
    ram_io      : inout std_logic_vector(15 downto 0);
57
    ram_bhen    : out std_logic;
58
    ram_blen    : out std_logic;
59
    ram_cen     : out std_logic;
60
    ram_oen     : out std_logic;
61
    ram_wen     : out std_logic;
62
 
63
    -- Compact flash
64
    cf_reset    : out std_logic;
65
--    cf_irq      : in std_logic;
66
    cf_iord     : out std_logic;
67
    cf_iowr     : out std_logic;
68
--    cf_wait     : in std_logic;
69
--    cf_dasp     : in std_logic;
70
--    cf_pdiag    : in std_logic;
71
--    cf_cd1      : in std_logic;
72
--    cf_cd2      : in std_logic;
73
--    iois16      : in std_logic;
74
--    cf_oe       : out std_logic;
75
    cf_pwr_en   : out std_logic;
76
    cf_cs0      : out std_logic;
77
    cf_cs1      : out std_logic
78
--    cf_we       : out std_logic;
79
--    cf_rew      : out std_logic
80
    );
81
end secd_fep_trenz;
82
 
83
-------------------------------------------------------------------------------
84
-- Architecture for System09
85
-------------------------------------------------------------------------------
86
architecture rtl of secd_fep_trenz is
87
  -----------------------------------------------------------------------------
88
  -- constants
89
  -----------------------------------------------------------------------------
90
  constant fep_only             : integer := 1;
91
 
92
  constant SYS_Clock_Frequency  : integer := 50000000;  -- FPGA System Clock
93
  constant VGA_Clock_Frequency  : integer := 25000000;  -- VGA Pixel Clock
94
  constant CPU_Clock_Frequency  : integer := 12500000;  -- CPU Clock
95
  constant BAUD_Rate            : integer := 57600;       -- Baud Rate
96
  constant ACIA_Clock_Frequency : integer := BAUD_Rate * 16;
97
 
98
  -----------------------------------------------------------------------------
99
  -- ChipScope Pro components and signals
100
  -----------------------------------------------------------------------------
101
 
102
--  component icon
103
--    port(control0    :   out std_logic_vector(35 downto 0));
104
--  end component;
105
 
106
--  component ila
107
--    port(control     : in    std_logic_vector(35 downto 0);
108
--         clk         : in    std_logic;
109
--         trig0       : in    std_logic_vector(39 downto 0));
110
--  end component;
111
 
112
--  signal chipscope_control : std_logic_vector(35 downto 0);
113
--  signal ila_clock : std_logic;
114
 
115
  -----------------------------------------------------------------------------
116
  -- Signals
117
  -----------------------------------------------------------------------------
118
 
119
  -- Clocks
120
  attribute buffer_type                 : string;
121
  attribute period                      : string;
122
 
123
  signal vdu_clk                        : std_logic;      -- 25 Mhz
124
  attribute period of vdu_clk           : signal is "40 ns";
125
  attribute buffer_type of vdu_clk      : signal is "BUFG";
126
 
127
  signal cpu_clk                        : std_logic;      -- 12.5 Mhz
128
  attribute buffer_type of cpu_clk      : signal is "BUFG";
129
 
130
  -- BOOT ROM
131
  signal rom_cs        : Std_logic;
132
  signal rom_data_out  : Std_Logic_Vector(7 downto 0);
133
 
134
  -- RAM
135
  signal user_ram0_cs   : std_logic;
136
  signal user_ram0_dout : std_logic_vector(7 downto 0);
137
  signal user_ram1_cs   : std_logic;
138
  signal user_ram1_dout : std_logic_vector(7 downto 0);
139
 
140
  -- UART Interface signals
141
  signal uart_data_out : Std_Logic_Vector(7 downto 0);
142
  signal uart_cs       : Std_Logic;
143
  signal uart_irq      : Std_Logic;
144
  signal baudclk       : Std_Logic;
145
  signal DCD_n         : Std_Logic;
146
  signal RTS_n         : Std_Logic;
147
  signal CTS_n         : Std_Logic;
148
 
149
  -- keyboard port
150
  signal keyboard_data_out : std_logic_vector(7 downto 0);
151
  signal keyboard_cs       : std_logic;
152
  signal keyboard_irq      : std_logic;
153
 
154
  -- CPU Interface signals
155
  signal cpu_rw       : std_logic;
156
  signal cpu_vma      : std_logic;
157
  signal cpu_halt     : std_logic;
158
  signal cpu_hold     : std_logic;
159
  signal cpu_firq     : std_logic;
160
  signal cpu_irq      : std_logic;
161
  signal cpu_nmi      : std_logic;
162
  signal cpu_addr     : std_logic_vector(15 downto 0);
163
  signal cpu_data_in  : std_logic_vector(7 downto 0);
164
  signal cpu_data_out : std_logic_vector(7 downto 0);
165
 
166
  -- Compact Flash port
167
  signal cf_data_out : std_logic_vector(7 downto 0);
168
  signal cf_cs       : std_logic;
169
  signal cf_rd       : std_logic;
170
  signal cf_wr       : std_logic;
171
 
172
  -- Video Display Unit
173
  signal vdu_cs       : std_logic;
174
  signal vdu_data_out : std_logic_vector(7 downto 0);
175
 
176
  -- VGA output signals (distributed to VGA DAC)
177
  signal red          : std_logic;
178
  signal green        : std_logic;
179
  signal blue         : std_logic;
180
 
181
  -- System Reset (generated by key press)
182
  signal reset        : std_logic;
183
 
184
  -- LCD register select
185
  signal lcd_cs       : std_logic;
186
 
187
  -- LED register select
188
  signal led_cs       : std_logic;
189
  signal led_reg      : std_logic_vector(7 downto 0) := (others => '0');
190
 
191
  -- Joystick buffer
192
  signal joystick     : std_logic_vector(7 downto 0);
193
 
194
  -- LED Flasher
195
  signal blink_count  : std_logic_vector(25 downto 0) := (others => '0');
196
 
197
  -- SECD interface
198
  signal secd_button           : std_logic := '0';
199
  signal secd_stop             : std_logic := '1';
200
  signal secd_stopped          : std_logic := '1';
201
  signal secd_state            : std_logic_vector(1 downto 0);
202
  signal secd_ram_addr_hi      : std_logic_vector(7 downto 0) := (others => '0');
203
  signal secd_ram_addr_high_cs : std_logic := '0';
204
  signal secd_ram_cs           : std_logic := '0';
205
  signal secd_control_cs       : std_logic := '0';
206
 
207
  -- SECD RAM Controller interface
208
  signal secd_ram_busy          : std_logic;
209
 
210
  -- RAM signal taps
211
  signal ram_bhenx : std_logic;
212
  signal ram_blenx : std_logic;
213
  signal ram_cenx : std_logic;
214
  signal ram_oenx : std_logic;
215
  signal ram_wenx : std_logic;
216
 
217
  -- Interface signals for SECD
218
  signal secd_ram_din32         : std_logic_vector(31 downto 0);
219
  signal secd_ram_dout32        : std_logic_vector(31 downto 0);
220
  signal secd_ram_addr32        : std_logic_vector(13 downto 0);
221
  signal secd_ram_read32        : std_logic;
222
  signal secd_ram_write32       : std_logic;
223
 
224
  -- Interface signals for 6809
225
  signal secd_ram_dout8         : std_logic_vector(7 downto 0);
226
  signal secd_ram_hold          : std_logic;
227
 
228
  -- Locked signal of clock synthesizer
229
  signal clock_locked           : std_logic;
230
  signal ila_clock              :std_logic;
231
-----------------------------------------------------------------
232
--
233
-- CPU09 CPU core
234
--
235
-----------------------------------------------------------------
236
 
237
component cpu09
238
  port (
239
         clk      :     in  std_logic;
240
    rst      : in  std_logic;
241
    rw       :  out std_logic;          -- Asynchronous memory interface
242
    vma      :  out std_logic;
243
    address  : out std_logic_vector(15 downto 0);
244
    data_in  : in        std_logic_vector(7 downto 0);
245
         data_out : out std_logic_vector(7 downto 0);
246
         halt     : in  std_logic;
247
         hold     : in  std_logic;
248
         irq      : in  std_logic;
249
         nmi      : in  std_logic;
250
         firq     : in  std_logic
251
  );
252
end component;
253
 
254
 
255
----------------------------------------
256
--
257
-- 16KByte Block RAM Mais Forth ROM
258
--
259
----------------------------------------
260
component maisforth_rom_16k
261
  Port (
262
    clk      : in  std_logic;
263
    rst      : in  std_logic;
264
    cs       : in  std_logic;
265
    rw       : in  std_logic;
266
    addr     : in  std_logic_vector (13 downto 0);
267
    rdata    : out std_logic_vector (7 downto 0);
268
    wdata    : in  std_logic_vector (7 downto 0)
269
    );
270
end component;
271
 
272
----------------------------------------
273
--
274
-- 8KBytes Block RAM for FLEX9
275
-- $C000 - $DFFF
276
--
277
----------------------------------------
278
component ram_2k
279
  Port (
280
    clk      : in  std_logic;
281
    rst      : in  std_logic;
282
    cs       : in  std_logic;
283
    rw       : in  std_logic;
284
    addr     : in  std_logic_vector (12 downto 0);
285
    rdata    : out std_logic_vector (7 downto 0);
286
    wdata    : in  std_logic_vector (7 downto 0)
287
    );
288
end component;
289
 
290
-----------------------------------------------------------------
291
--
292
-- Open Cores Mini UART
293
--
294
-----------------------------------------------------------------
295
 
296
component ACIA_6850
297
  port (
298
    clk      : in  Std_Logic;  -- System Clock
299
    rst      : in  Std_Logic;  -- Reset input (active high)
300
    cs       : in  Std_Logic;  -- miniUART Chip Select
301
    rw       : in  Std_Logic;  -- Read / Not Write
302
    irq      : out Std_Logic;  -- Interrupt
303
    Addr     : in  Std_Logic;  -- Register Select
304
    DataIn   : in  Std_Logic_Vector(7 downto 0); -- Data Bus In 
305
    DataOut  : out Std_Logic_Vector(7 downto 0); -- Data Bus Out
306
    RxC      : in  Std_Logic;  -- Receive Baud Clock
307
    TxC      : in  Std_Logic;  -- Transmit Baud Clock
308
    RxD      : in  Std_Logic;  -- Receive Data
309
    TxD      : out Std_Logic;  -- Transmit Data
310
         DCD_n    : in  Std_Logic;  -- Data Carrier Detect
311
    CTS_n    : in  Std_Logic;  -- Clear To Send
312
    RTS_n    : out Std_Logic   -- Request To send
313
  );
314
end component;
315
 
316
-----------------------------------------------------------------
317
--
318
-- ACIA Clock divider
319
--
320
-----------------------------------------------------------------
321
 
322
component ACIA_Clock
323
  generic (
324
     SYS_Clock_Frequency  : integer :=  VGA_Clock_Frequency;
325
          ACIA_Clock_Frequency : integer := ACIA_Clock_Frequency
326
  );
327
  port (
328
     clk      : in  Std_Logic;  -- System Clock Input
329
          ACIA_clk : out Std_logic   -- ACIA Clock output
330
  );
331
end component;
332
 
333
 
334
----------------------------------------
335
--
336
-- PS/2 Keyboard
337
--
338
----------------------------------------
339
 
340
component keyboard
341
  generic(
342
  KBD_Clock_Frequency : integer := CPU_Clock_Frequency
343
  );
344
  port(
345
  clk             : in    std_logic;
346
  rst             : in    std_logic;
347
  cs              : in    std_logic;
348
  rw              : in    std_logic;
349
  addr            : in    std_logic;
350
  data_in         : in    std_logic_vector(7 downto 0);
351
  data_out        : out   std_logic_vector(7 downto 0);
352
  irq             : out   std_logic;
353
  kbd_clk         : inout std_logic;
354
  kbd_data        : inout std_logic
355
  );
356
end component;
357
 
358
----------------------------------------
359
--
360
-- Video Display Unit.
361
--
362
----------------------------------------
363
component vdu8
364
      generic(
365
        VDU_CLOCK_FREQUENCY    : integer := CPU_Clock_Frequency; -- HZ
366
        VGA_CLOCK_FREQUENCY    : integer := VGA_Clock_Frequency; -- HZ
367
             VGA_HOR_CHARS          : integer := 80; -- CHARACTERS
368
             VGA_VER_CHARS          : integer := 25; -- CHARACTERS
369
             VGA_PIXELS_PER_CHAR    : integer := 8;  -- PIXELS
370
             VGA_LINES_PER_CHAR     : integer := 16; -- LINES
371
             VGA_HOR_BACK_PORCH     : integer := 40; -- PIXELS
372
             VGA_HOR_SYNC           : integer := 96; -- PIXELS
373
             VGA_HOR_FRONT_PORCH    : integer := 24; -- PIXELS
374
             VGA_VER_BACK_PORCH     : integer := 13; -- LINES
375
             VGA_VER_SYNC           : integer := 1;  -- LINES
376
             VGA_VER_FRONT_PORCH    : integer := 36  -- LINES
377
      );
378
      port(
379
                -- control register interface
380
      vdu_clk      : in  std_logic;      -- CPU Clock - 12.5MHz
381
      vdu_rst      : in  std_logic;
382
                vdu_cs       : in  std_logic;
383
                vdu_rw       : in  std_logic;
384
                vdu_addr     : in  std_logic_vector(2 downto 0);
385
      vdu_data_in  : in  std_logic_vector(7 downto 0);
386
      vdu_data_out : out std_logic_vector(7 downto 0);
387
 
388
      -- vga port connections
389
                vga_clk      : in  std_logic;   -- VGA Pixel Clock - 25 MHz
390
      vga_red_o    : out std_logic;
391
      vga_green_o  : out std_logic;
392
      vga_blue_o   : out std_logic;
393
      vga_hsync_o  : out std_logic;
394
      vga_vsync_o  : out std_logic
395
   );
396
end component;
397
 
398
begin
399
 
400
  -----------------------------------------------------------------
401
  --
402
  -- ChipsScope Pro cores
403
  --
404
  -----------------------------------------------------------------
405
 
406
--  i_icon : icon
407
--    port map(control0  => chipscope_control);
408
--
409
--  i_ila : ila
410
--    port map(control => chipscope_control,
411
--             clk => ila_clock,
412
--             trig0(15 downto 8) => cpu_data_in,
413
--             trig0(23 downto 16) => cpu_data_out,
414
--             trig0(39 downto 24) => cpu_addr,
415
--             trig0(0) => cpu_clk,
416
--             trig0(1) => cpu_vma,
417
--             trig0(2) => ram_bhenx,
418
--             trig0(3) => ram_blenx,
419
--             trig0(4) => ram_cenx,
420
--             trig0(5) => ram_oenx,
421
--             trig0(6) => ram_wenx,
422
--             trig0(7) => vdu_clk);
423
 
424
  -----------------------------------------------------------------
425
  --
426
  -- CPU09 CPU core
427
  --
428
  -----------------------------------------------------------------
429
 
430
  my_cpu : entity cpu09 port map (
431
    clk       => cpu_clk,
432
    rst       => reset,
433
    rw        => cpu_rw,
434
    vma       => cpu_vma,
435
    address   => cpu_addr,
436
    data_in   => cpu_data_in,
437
    data_out  => cpu_data_out,
438
    halt      => cpu_halt,
439
    hold      => cpu_hold,
440
    irq       => cpu_irq,
441
    nmi       => cpu_nmi,
442
    firq      => cpu_firq
443
    );
444
 
445
  ----------------------------------------
446
  --
447
  -- Maisforth ROM (Xilinx Block RAM, 16k)
448
  --
449
  ----------------------------------------
450
 
451
  my_maisforth_rom_16k : entity maisforth_rom_16k port map (
452
    clk   => cpu_clk,
453
         rst   => reset,
454
    cs    => rom_cs,
455
         rw    => '1',
456
    addr  => cpu_addr(13 downto 0),
457
    rdata => rom_data_out,
458
         wdata => cpu_data_out
459
    );
460
 
461
  -----------------------------------------------------------------------------
462
  --
463
  -- Internal RAM (Xilinx Block RAM, 4k)
464
  --
465
  -----------------------------------------------------------------------------
466
 
467
  my_user_ram0_2k : entity ram_2k port map (
468
    clk   => cpu_clk,
469
         rst   => reset,
470
    cs    => user_ram0_cs,
471
    rw    => cpu_rw,
472
    addr  => cpu_addr(10 downto 0),
473
    rdata => user_ram0_dout,
474
    wdata => cpu_data_out
475
    );
476
 
477
  my_user_ram1_2k : entity ram_2k port map (
478
    clk   => cpu_clk,
479
         rst   => reset,
480
    cs    => user_ram1_cs,
481
    rw    => cpu_rw,
482
    addr  => cpu_addr(10 downto 0),
483
    rdata => user_ram1_dout,
484
    wdata => cpu_data_out
485
    );
486
 
487
  -----------------------------------------------------------------
488
  --
489
  -- 6850 ACIA
490
  --
491
  -----------------------------------------------------------------
492
 
493
  my_uart  : entity acia_6850 port map (
494
    clk      => cpu_clk,
495
    rst       => reset,
496
    cs        => uart_cs,
497
    rw        => cpu_rw,
498
    irq       => uart_irq,
499
    Addr      => cpu_addr(0),
500
    Datain    => cpu_data_out,
501
    DataOut   => uart_data_out,
502
    RxC       => baudclk,
503
    TxC       => baudclk,
504
    RxD       => fpga_rxd,
505
    TxD       => fpga_txd,
506
    DCD_n     => dcd_n,
507
    CTS_n     => fpga_cts,
508
    RTS_n     => fpga_rts
509
    );
510
 
511
 
512
----------------------------------------
513
--
514
-- PS/2 Keyboard Interface
515
--
516
----------------------------------------
517
my_keyboard : keyboard
518
   generic map (
519
        KBD_Clock_Frequency => CPU_Clock_frequency
520
        )
521
   port map(
522
        clk          => cpu_clk,
523
        rst          => reset,
524
        cs           => keyboard_cs,
525
        rw           => cpu_rw,
526
        addr         => cpu_addr(0),
527
        data_in      => cpu_data_out(7 downto 0),
528
        data_out     => keyboard_data_out(7 downto 0),
529
        irq          => keyboard_irq,
530
        kbd_clk      => ps2_clk1,
531
        kbd_data     => ps2_data1
532
        );
533
 
534
----------------------------------------
535
--
536
-- Video Display Unit instantiation
537
--
538
----------------------------------------
539
my_vdu : vdu8
540
  generic map(
541
      VDU_CLOCK_FREQUENCY    => CPU_Clock_Frequency, -- HZ
542
      VGA_CLOCK_FREQUENCY    => VGA_Clock_Frequency, -- HZ
543
           VGA_HOR_CHARS          => 80, -- CHARACTERS
544
           VGA_VER_CHARS          => 25, -- CHARACTERS
545
           VGA_PIXELS_PER_CHAR    => 8,  -- PIXELS
546
           VGA_LINES_PER_CHAR     => 16, -- LINES
547
           VGA_HOR_BACK_PORCH     => 40, -- PIXELS
548
           VGA_HOR_SYNC           => 96, -- PIXELS
549
           VGA_HOR_FRONT_PORCH    => 24, -- PIXELS
550
           VGA_VER_BACK_PORCH     => 13, -- LINES
551
           VGA_VER_SYNC           => 1,  -- LINES
552
           VGA_VER_FRONT_PORCH    => 36  -- LINES
553
  )
554
  port map(
555
 
556
                -- Control Registers
557
                vdu_clk       => cpu_clk,                                        -- 12.5 MHz System Clock in
558
      vdu_rst       => reset,
559
                vdu_cs        => vdu_cs,
560
                vdu_rw        => cpu_rw,
561
                vdu_addr      => cpu_addr(2 downto 0),
562
                vdu_data_in   => cpu_data_out,
563
                vdu_data_out  => vdu_data_out,
564
 
565
      -- vga port connections
566
      vga_clk       => vdu_clk,                                  -- 25 MHz VDU pixel clock
567
      vga_red_o     => red,
568
      vga_green_o   => green,
569
      vga_blue_o    => blue,
570
      vga_hsync_o   => hsync_b,
571
      vga_vsync_o   => vsync_b
572
   );
573
 
574
  ----------------------------------------
575
  --
576
  -- Clock Synthesis instantiation
577
  --
578
  ----------------------------------------
579
 
580
  my_clock_synthesis : entity clock_synthesis port map (
581
    clk_30mhz       => utmi_clkout,
582
    vdu_clk         => vdu_clk,
583
    cpu_clk         => cpu_clk,
584
    locked          => clock_locked );
585
--    clk_60mhz       => ila_clock);
586
 
587
--make_secd: if fep_only /= '1' generate
588
--  ----------------------------------------
589
--  --
590
--  -- SECD CPU instantiation
591
--  --
592
--  ----------------------------------------
593
--
594
--  my_secd_system : entity secd_system port map (
595
--    clk         => cpu_clk,
596
--    reset       => reset,
597
--    button      => secd_button,
598
--    ram_read    => secd_ram_read32,
599
--    ram_in      => secd_ram_dout32,
600
--    ram_write   => secd_ram_write32,
601
--    ram_out     => secd_ram_din32,
602
--    ram_a       => secd_ram_addr32,
603
--    ram_busy    => secd_ram_busy,
604
--    stop_input  => secd_stop,
605
--    stopped     => secd_stopped,
606
--    state       => secd_state
607
--    );
608
--end generate;
609
 
610
  ----------------------------------------
611
  --
612
  -- SECD RAM Controller instantiation
613
  --
614
  ----------------------------------------
615
 
616
  my_secd_ram : entity secd_ram_controller port map (
617
    clk                 => vdu_clk,
618
    reset               => reset,
619
    secd_stopped        => secd_stopped,
620
 
621
    -- SECD interface
622
    din32               => secd_ram_din32,
623
    dout32              => secd_ram_dout32,
624
    addr32              => secd_ram_addr32,
625
    read32_enable       => secd_ram_read32,
626
    write32_enable      => secd_ram_write32,
627
    busy32              => secd_ram_busy,
628
 
629
    -- 6809 interface
630
         clk8                => cpu_clk,
631
    din8                => cpu_data_out,
632
    dout8               => secd_ram_dout8,
633
    addr8(15 downto 8)  => secd_ram_addr_hi,
634
    addr8(7 downto 0)   => cpu_addr(7 downto 0),
635
    cs8_ram             => secd_ram_cs,
636
    rw8                 => cpu_rw,
637
    hold8               => secd_ram_hold,
638
 
639
         -- Compact Flash interface
640
         cs8_cf              => cf_cs,
641
 
642
    -- external interface
643
    ram_oen             => ram_oenx,
644
    ram_cen             => ram_cenx,
645
    ram_wen             => ram_wenx,
646
    ram_io        => ram_io,
647
    ram_a         => ram_a,
648
    ram_bhen            => ram_bhenx,
649
    ram_blen            => ram_blenx
650
    );
651
 
652
 
653
----------------------------------------
654
--
655
-- ACIA Clock
656
--
657
----------------------------------------
658
my_ACIA_Clock : ACIA_Clock
659
  generic map(
660
    SYS_Clock_Frequency  => VGA_Clock_Frequency,
661
         ACIA_Clock_Frequency => ACIA_Clock_Frequency
662
  )
663
  port map(
664
    clk        => vdu_clk,
665
    acia_clk   => baudclk
666
  );
667
 
668
  ----------------------------------------------------------------------
669
  --
670
  -- Process to decode memory map
671
  --
672
  ----------------------------------------------------------------------
673
 
674
  mem_decode : process( cpu_addr, cpu_rw, cpu_vma,
675
                        rom_data_out,
676
                        user_ram0_dout,
677
                        user_ram1_dout,
678
                        uart_data_out,
679
                        keyboard_data_out,
680
                        joystick,
681
                        vdu_data_out,
682
                                                                cf_data_out,
683
                        cpu_data_out,
684
                        secd_state, secd_stopped, secd_ram_dout8, secd_ram_addr_hi )
685
 
686
  begin
687
    user_ram0_cs     <= '0';
688
    user_ram1_cs     <= '0';
689
    rom_cs           <= '0';
690
    uart_cs          <= '0';
691
    keyboard_cs      <= '0';
692
    vdu_cs           <= '0';
693
         cf_cs            <= '0';
694
    lcd_cs           <= '0';
695
    led_cs           <= '0';
696
    cpu_data_in      <= X"00";
697
 
698
    secd_control_cs       <= '0';
699
    secd_ram_cs           <= '0';
700
    secd_ram_addr_high_cs <= '0';
701
 
702
    case cpu_addr(15 downto 14) is
703
 
704
      -- Maisforth ROM - $C000 - $FFFF
705
      when "11" =>
706
        cpu_data_in     <= rom_data_out;
707
        rom_cs          <= cpu_vma;              -- read  ROM
708
 
709
      -- RAM - $0000-$3FFF
710
      when "00" =>
711
                  case cpu_addr(13 downto 11) is
712
                  when "000" =>
713
           cpu_data_in <= user_ram0_dout;
714
           user_ram0_cs <= cpu_vma;
715
 
716
                  when "001" =>
717
           cpu_data_in <= user_ram1_dout;
718
           user_ram1_cs <= cpu_vma;
719
 
720
        when others =>
721
                     cpu_data_in <= (others => '0');
722
 
723
        end case;
724
 
725
      -- Unmapped - $4000-$7FFF, read as FF
726
      when "01" =>
727
        cpu_data_in <= X"FF";
728
 
729
      -- I/O - $8000-$BFFF - Do additional decoding
730
      when "10" =>
731
        case cpu_addr(13 downto 8) is
732
 
733
          -- Real I/O $B000 - $B0FF
734
          when "110000" =>
735
            case cpu_addr(7 downto 4) is
736
 
737
              -- UART / ACIA $B000
738
              when X"0" =>
739
                cpu_data_in <= uart_data_out;
740
                uart_cs     <= cpu_vma;
741
 
742
              -- Keyboard port $B010 - $B01F
743
                                  -- Note in latest System09
744
                                  -- I have moved the Keyboard
745
                                  -- to $E020 to make way for the
746
                                  -- Floppy Disk Controller at $E01X
747
                                  -- JK. 10th Aug 07
748
              when X"1" =>
749
                cpu_data_in <= keyboard_data_out;
750
                keyboard_cs <= cpu_vma;
751
 
752
              -- VDU port $B020 - $B02F
753
                                  -- Note in latest System09
754
                                  -- I have moved the VDU to
755
                                  -- $E030 - JK. 10th Aug 07
756
              when X"2" =>
757
                cpu_data_in <= vdu_data_out;
758
                vdu_cs      <= cpu_vma;
759
 
760
              -- CF port $B040 - $B04F
761
                                  -- Note in latest System09
762
                                  -- I have moved the CF to
763
                                  -- $E040 - JK. 10th Aug 07
764
              when X"4" =>
765
                cpu_data_in <= secd_ram_dout8;
766
                cf_cs       <= cpu_vma;
767
 
768
              -- Joystick $B0D0 (read only)
769
              when X"D" =>
770
                if cpu_addr(3 downto 0) = "0000" then
771
                  cpu_data_in <= joystick;
772
                end if;
773
 
774
              -- LED $B0E0 (write only)
775
              when X"E" =>
776
                if cpu_addr(3 downto 0) = "0000" then
777
                  led_cs <= cpu_vma;
778
                end if;
779
 
780
              -- LCD Display $B0F0 (write only)
781
              when X"F" =>
782
                if cpu_addr(3 downto 0) = "0000" then
783
                  lcd_cs <= cpu_vma;
784
                end if;
785
 
786
              when others =>
787
                null;
788
            end case;
789
 
790
          -- SECD Control registers - $B100
791
          when "110001" =>
792
 
793
            case cpu_addr(7 downto 0) is
794
 
795
              -- $B140 -> SECD Status
796
              when X"40" =>
797
                secd_control_cs         <= cpu_vma;
798
                cpu_data_in(0)          <= secd_stopped;
799
                cpu_data_in(2 downto 1) <= secd_state;
800
 
801
              -- $B141 -> SECD Address High
802
              when X"41" =>
803
                secd_ram_addr_high_cs   <= cpu_vma;
804
                cpu_data_in             <= secd_ram_addr_hi;
805
 
806
              when others =>
807
                null;
808
 
809
            end case;
810
 
811
          -- SECD mapped memory page - $B200
812
          when "110010" =>
813
            cpu_data_in                 <= secd_ram_dout8;
814
            secd_ram_cs                 <= cpu_vma;
815
 
816
          when others =>
817
            null;
818
 
819
        end case;
820
 
821
      when others =>
822
        null;
823
 
824
    end case;
825
  end process;
826
 
827
--
828
-- Compact Flash Control
829
--
830
compact_flash: process( reset_sw,
831
                 cpu_addr, cpu_rw, cpu_vma, cpu_data_out,
832
                                          cf_cs, cf_rd, cf_wr )
833
begin
834
         cf_reset  <= reset_sw;
835
         cf_cs0    <= not( cf_cs ) or cpu_addr(3);
836
         cf_cs1    <= not( cf_cs and cpu_addr(3));
837
         cf_wr     <= cf_cs and (not cpu_rw);
838
         cf_rd     <= cf_cs and cpu_rw;
839
         cf_iowr   <= not cf_wr;
840
         cf_iord   <= not cf_rd;
841
    cf_pwr_en <= '0';
842
end process;
843
 
844
 
845
--
846
-- Interrupts and other bus control signals
847
--
848
  interrupts : process( reset_sw, uart_irq, keyboard_irq, reset, joy_up, secd_ram_hold, secd_ram_cs )
849
  begin
850
    cpu_irq   <= keyboard_irq;
851
    cpu_nmi   <= not joy_up;
852
    cpu_firq  <= uart_irq;
853
    cpu_halt  <= '0';
854
         cpu_hold  <= secd_ram_hold;
855
  end process;
856
 
857
  --
858
  -- LCD write register
859
  --
860
  lcd_control : process(lcd_cs, cpu_clk, cpu_data_out)
861
  begin
862
    if falling_edge(cpu_clk) then
863
      if lcd_cs = '1' and cpu_rw = '0' then
864
        lcd_d     <= cpu_data_out(3 downto 0);
865
        lcd_e     <= cpu_data_out(4);
866
        lcd_rw    <= cpu_data_out(5);
867
        lcd_rs    <= cpu_data_out(6);
868
      end if;
869
    end if;
870
  end process;
871
 
872
  --
873
  -- LED write register
874
  --
875
  led_control : process(led_reg, led_cs, cpu_clk, cpu_data_out)
876
  begin
877
    if falling_edge(cpu_clk) then
878
      if led_cs = '1' and cpu_rw = '0' then
879
        led_reg(3 downto 0) <= cpu_data_out(3 downto 0);
880
      else
881
        led_reg <= led_reg;
882
      end if;
883
    end if;
884
 
885
    led <= led_reg(3 downto 0);
886
  end process;
887
 
888
  -- SECD control register
889
  --
890
  secd_control : process(secd_control_cs, cpu_clk, cpu_data_out)
891
  begin
892
    if falling_edge(cpu_clk) then
893
      if secd_control_cs = '1' and cpu_rw = '0' then
894
        secd_stop   <= cpu_data_out(0);
895
        secd_button <= cpu_data_out(1);
896
      end if;
897
    end if;
898
  end process;
899
 
900
  --
901
  -- SECD RAM Adressing
902
  --
903
 
904
  secd_ram_addressing_high : process(cpu_clk, cpu_rw, cpu_data_out, secd_ram_addr_high_cs)
905
  begin
906
    if falling_edge(cpu_clk) then
907
      if cpu_rw = '0' and secd_ram_addr_high_cs = '1' then
908
        secd_ram_addr_hi <= cpu_data_out;
909
      end if;
910
    end if;
911
  end process;
912
 
913
  --
914
  -- Joystick register
915
  --
916
  read_joystick : process(cpu_clk, joy_up, joy_right, joy_down, joy_left, joy_fire)
917
  begin
918
    if rising_edge(cpu_clk) then
919
      joystick(0) <= joy_up;
920
      joystick(1) <= joy_right;
921
      joystick(2) <= joy_down;
922
      joystick(3) <= joy_left;
923
      joystick(4) <= joy_fire;
924
      joystick(7 downto 5) <= (others => '0');
925
    end if;
926
  end process;
927
 
928
--
929
-- LED Flasher
930
--
931
  my_led_flasher: process(vdu_clk, reset, blink_count)
932
  begin
933
    if reset = '1' then
934
      blink_count <= (others => '0');
935
    elsif rising_edge(vdu_clk) then
936
      blink_count <= blink_count + 1;
937
    end if;
938
 
939
    mm_led <= blink_count(25);
940
 
941
  end process;
942
 
943
-- Set UART DCD to always true
944
  DCD_n <= '0';
945
 
946
--
947
-- Feed RGB DAC
948
--
949
  fpga_r(0) <= red;
950
  fpga_r(1) <= red;
951
  fpga_r(2) <= red;
952
  fpga_g(0) <= green;
953
  fpga_g(1) <= green;
954
  fpga_g(2) <= green;
955
  fpga_b(0) <= blue;
956
  fpga_b(1) <= blue;
957
  fpga_b(2) <= blue;
958
 
959
  -- set USB PHY to 16 bit mode so that it generates a 30 Mhz Clock
960
  utmi_databus16_8 <= '1';
961
 
962
  -- Hold system in reset until the clock is locked or when the reset
963
  -- key is pressed.
964
  reset     <= not reset_sw or not clock_locked;
965
 
966
  aud_out <= (others => '0');
967
 
968
  ram_bhen <= ram_bhenx;
969
  ram_blen <= ram_blenx;
970
  ram_cen <= ram_cenx;
971
  ram_oen <= ram_oenx;
972
  ram_wen <= ram_wenx;
973
 
974
  secd_ram_din32 <= (others => '0');
975
  secd_ram_addr32       <= (others => '0');
976
  secd_ram_read32 <= '0';
977
  secd_ram_write32 <= '0';
978
 
979
end;
980
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.