OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] [rtl/] [VHDL/] [datram.vhd] - Blame information for rev 77

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 19 dilbert57 
--===========================================================================--
2 
--
3 
--  S Y N T H E Z I A B L E    Dynamic Address Translation Registers
4 
--
5 
--  www.OpenCores.Org - December 2002
6 
--  This core adheres to the GNU public license
7 
--
8 
-- File name      : datram.vhd
9 
--
10 
-- entity name    : dat_ram
11 
--
12 
-- Purpose        : Implements a Dynamic Address Translation RAM module
13 
--                  Maps the high order 4 address bits to 8 address lines
14 
--                  extending the memory addressing range to 1 Mbytes
15 
--                  Memory segments are mapped on 4 KByte boundaries
16 
--                  The DAT registers map to the top of memory
17 
--                  ($FFF0 - $FFFF) and are write only so can map behind ROM.
18 
--                  Since the DAT is not supported by SWTBUG for the 6800,
19 
--                  the resgisters reset state map the bottom 64K of RAM.
20 
--
21 
-- Dependencies   : ieee.Std_Logic_1164
22 
--                  ieee.std_logic_unsigned
23 
--
24 
-- Author         : John E. Kent
25 
--
26 
--===========================================================================----
27 
--
28 
-- Revision History:
29 
--
30 
-- Date          Revision  Author
31 
-- 10 Nov 2002   0.1       John Kent
32 
--
33 
-- 21 Nov 2006   0.2       John Kent
34 
-- Inverted bottom 4 bits of dat_addr
35 
-- so that it is compatible with SWTPc MP-09 card.
36 
-- DAT is initializedas follows:
37 
--
38 
-- DAT    Dat           Logical Physical
39 
-- Reg    Val           Addr    Addr
40 
--      fff0 - 0f - page 0 - $0xxx = $00xxx (RAM)
41 
--      fff1 - 0e - page 1 - $1xxx = $01xxx (RAM)
42 
--      fff2 - 0d - page 0 - $2xxx = $02xxx (RAM)
43 
--      fff3 - 0c - page 0 - $3xxx = $03xxx (RAM)
44 
--      fff4 - 0b - page 0 - $4xxx = $04xxx (RAM)
45 
--      fff5 - 0a - page 0 - $5xxx = $05xxx (RAM)
46 
--      fff6 - 09 - page 0 - $6xxx = $06xxx (RAM)
47 
--      fff7 - 08 - page 0 - $7xxx = $07xxx (RAM)
48 
--      fff8 - 07 - page 0 - $8xxx = $08xxx (RAM)
49 
--      fff9 - 06 - page 0 - $9xxx = $09xxx (RAM)
50 
--      fffa - 05 - page 0 - $axxx = $0axxx (RAM)
51 
--      fffb - 04 - page 0 - $bxxx = $0bxxx (RAM)
52 
--      fffc - 03 - page 0 - $cxxx = $0cxxx (RAM)
53 
--      fffd - 02 - page 0 - $dxxx = $0dxxx (RAM)
54 
--      fffe - f1 - page 0 - $exxx = $fexxx (I/O)
55 
--      ffff - f0 - page 0 - $fxxx = $ffxxx (ROM/DMFA2)
56 
 
57 
-- 25 Feb 2007   0.3      John Kent
58 
-- modify the sensitivity lists
59 
--
60 
 
61 
library ieee;
62 
  use ieee.std_logic_1164.all;
63 
  use ieee.std_logic_unsigned.all;
64 
library unisim;
65 
  use unisim.vcomponents.all;
66 
 
67 
entity dat_ram is
68 
        port (
69 
         clk       : in  std_logic;
70 
    rst       : in  std_logic;
71 
    cs        : in  std_logic;
72 
    rw        : in  std_logic;
73 
    addr_hi   : in  std_logic_vector(3 downto 0);
74 
    addr_lo   : in  std_logic_vector(3 downto 0);
75 
    data_in   : in  std_logic_vector(7 downto 0);
76 
         data_out  : out std_logic_vector(7 downto 0));
77 
end dat_ram;
78 
 
79 
architecture rtl of dat_ram is
80 
signal dat_reg0 : std_logic_vector(7 downto 0);
81 
signal dat_reg1 : std_logic_vector(7 downto 0);
82 
signal dat_reg2 : std_logic_vector(7 downto 0);
83 
signal dat_reg3 : std_logic_vector(7 downto 0);
84 
signal dat_reg4 : std_logic_vector(7 downto 0);
85 
signal dat_reg5 : std_logic_vector(7 downto 0);
86 
signal dat_reg6 : std_logic_vector(7 downto 0);
87 
signal dat_reg7 : std_logic_vector(7 downto 0);
88 
signal dat_reg8 : std_logic_vector(7 downto 0);
89 
signal dat_reg9 : std_logic_vector(7 downto 0);
90 
signal dat_reg10 : std_logic_vector(7 downto 0);
91 
signal dat_reg11 : std_logic_vector(7 downto 0);
92 
signal dat_reg12 : std_logic_vector(7 downto 0);
93 
signal dat_reg13 : std_logic_vector(7 downto 0);
94 
signal dat_reg14 : std_logic_vector(7 downto 0);
95 
signal dat_reg15 : std_logic_vector(7 downto 0);
96 
 
97 
begin
98 
 
99 
---------------------------------
100 
--
101 
-- Write DAT RAM
102 
--
103 
---------------------------------
104 
 
105 
--dat_write : process( clk, rst, addr_lo, cs, rw, data_in )
106 
dat_write : process( clk )
107 
begin
108 
  if clk'event and clk = '0' then
109 
    if rst = '1' then
110 
      dat_reg0  <= "00001111";
111 
      dat_reg1  <= "00001110";
112 
      dat_reg2  <= "00001101";
113 
      dat_reg3  <= "00001100";
114 
      dat_reg4  <= "00001011";
115 
      dat_reg5  <= "00001010";
116 
      dat_reg6  <= "00001001";
117 
      dat_reg7  <= "00001000";
118 
      dat_reg8  <= "00000111";
119 
      dat_reg9  <= "00000110";
120 
      dat_reg10 <= "00000101";
121 
      dat_reg11 <= "00000100";
122 
      dat_reg12 <= "00000011";
123 
      dat_reg13 <= "00000010";
124 
      dat_reg14 <= "11110001";
125 
      dat_reg15 <= "11110000";
126 
    else
127 
           if cs = '1' and rw = '0' then
128 
        case addr_lo is
129 
             when "0000" =>
130 
                    dat_reg0 <= data_in;
131 
             when "0001" =>
132 
                    dat_reg1 <= data_in;
133 
             when "0010" =>
134 
                    dat_reg2 <= data_in;
135 
             when "0011" =>
136 
                    dat_reg3 <= data_in;
137 
             when "0100" =>
138 
                    dat_reg4 <= data_in;
139 
             when "0101" =>
140 
                    dat_reg5 <= data_in;
141 
             when "0110" =>
142 
                    dat_reg6 <= data_in;
143 
             when "0111" =>
144 
                    dat_reg7 <= data_in;
145 
             when "1000" =>
146 
                    dat_reg8 <= data_in;
147 
             when "1001" =>
148 
                    dat_reg9 <= data_in;
149 
             when "1010" =>
150 
                    dat_reg10 <= data_in;
151 
             when "1011" =>
152 
                    dat_reg11 <= data_in;
153 
             when "1100" =>
154 
                    dat_reg12 <= data_in;
155 
             when "1101" =>
156 
                    dat_reg13 <= data_in;
157 
             when "1110" =>
158 
                    dat_reg14 <= data_in;
159 
             when "1111" =>
160 
                    dat_reg15 <= data_in;
161 
        when others =>
162 
                    null;
163 
                  end case;
164 
           end if;
165 
         end if;
166 
  end if;
167 
end process;
168 
 
169 
dat_read : process(  addr_hi,
170 
                     dat_reg0, dat_reg1, dat_reg2, dat_reg3,
171 
                     dat_reg4, dat_reg5, dat_reg6, dat_reg7,
172 
                     dat_reg8, dat_reg9, dat_reg10, dat_reg11,
173 
                     dat_reg12, dat_reg13, dat_reg14, dat_reg15 )
174 
variable phy_addr : std_logic_vector( 7 downto 0 );
175 
begin
176 
      case addr_hi is
177 
             when "0000" =>
178 
                    phy_addr := dat_reg0;
179 
             when "0001" =>
180 
                    phy_addr := dat_reg1;
181 
             when "0010" =>
182 
                    phy_addr := dat_reg2;
183 
             when "0011" =>
184 
                    phy_addr := dat_reg3;
185 
             when "0100" =>
186 
                    phy_addr := dat_reg4;
187 
             when "0101" =>
188 
                    phy_addr := dat_reg5;
189 
             when "0110" =>
190 
                    phy_addr := dat_reg6;
191 
             when "0111" =>
192 
                    phy_addr := dat_reg7;
193 
             when "1000" =>
194 
                    phy_addr := dat_reg8;
195 
             when "1001" =>
196 
                    phy_addr := dat_reg9;
197 
             when "1010" =>
198 
                    phy_addr := dat_reg10;
199 
             when "1011" =>
200 
                    phy_addr := dat_reg11;
201 
             when "1100" =>
202 
                    phy_addr := dat_reg12;
203 
             when "1101" =>
204 
                    phy_addr := dat_reg13;
205 
             when "1110" =>
206 
                    phy_addr := dat_reg14;
207 
             when "1111" =>
208 
                    phy_addr := dat_reg15;
209 
        when others =>
210 
                    null;
211 
                end case;
212 
      data_out( 7 downto 4 ) <= phy_addr( 7 downto 4 );
213 
      data_out( 3 downto 0 ) <= not( phy_addr( 3 downto 0 ) );
214 
 
215 
end process;
216 
 
217 
end rtl;
218 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.