Subversion Repositories System11

--===========================================================================--

--

--  S Y N T H E Z I A B L E    datram - Dynamic Address Translation core

--

--  www.OpenCores.Org - September 2003

--  This core adheres to the GNU public license  

--

-- File name      : datram.vhd

--

-- Entity name    : dat_ram

--

-- Purpose        : Maps address bits A12 to A15 of an 8 bit

--                  Microprocessor to access 1Mbyte of RAM

--                  The 8 data output pins form addresses

--                  PA12 to PA19. 16 x 4K pages are selected

--                  by writing the high order physical address

--                  of memory into the 16 registers.

--                  Low order CPU addres bits A11 .. A0

--                  connect directly through to the Phyical

--                  address bits PA11 .. PA0

--                  Register 0  is for A15..A12 = "0000"

--                  Register 1  is for A15..A12 = "0001"

--                  Register 2  is for A15..A12 = "0010"

--                  Register 15 is for A15..A12 = "1111"

--                  Registers are pre-initialised to select

--                  the bottom 64K of physical address space

--

-- Dependencies   : ieee.std_logic_1164

--                  ieee.std_logic_unsigned

--

-- Uses           : Nothing

--

-------------------------------------------------------------------------------

-- Revision list

--

-- Revision 0.1 - 10 November 2002 - John Kent

--

-- Revision 1.0 - 7 September - John Kent

-- Initial release to open cores

--

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_unsigned.all;

entity dat_ram is

        port (

         clk       : in  std_logic;

    rst       : in  std_logic;

    cs        : in  std_logic;

    rw        : in  std_logic;

    addr_hi   : in  std_logic_vector(3 downto 0);

    addr_lo   : in  std_logic_vector(3 downto 0);

    data_in   : in  std_logic_vector(7 downto 0);

         data_out  : out std_logic_vector(7 downto 0));

end;

architecture datram_arch of dat_ram is

signal dat_reg0 : std_logic_vector(7 downto 0);

signal dat_reg1 : std_logic_vector(7 downto 0);

signal dat_reg2 : std_logic_vector(7 downto 0);

signal dat_reg3 : std_logic_vector(7 downto 0);

signal dat_reg4 : std_logic_vector(7 downto 0);

signal dat_reg5 : std_logic_vector(7 downto 0);

signal dat_reg6 : std_logic_vector(7 downto 0);

signal dat_reg7 : std_logic_vector(7 downto 0);

signal dat_reg8 : std_logic_vector(7 downto 0);

signal dat_reg9 : std_logic_vector(7 downto 0);

signal dat_reg10 : std_logic_vector(7 downto 0);

signal dat_reg11 : std_logic_vector(7 downto 0);

signal dat_reg12 : std_logic_vector(7 downto 0);

signal dat_reg13 : std_logic_vector(7 downto 0);

signal dat_reg14 : std_logic_vector(7 downto 0);

signal dat_reg15 : std_logic_vector(7 downto 0);

begin

--------------------------------

--

-- read I/O port

--

--------------------------------

---------------------------------

--

-- Write DAT RAM

--

---------------------------------

dat_write : process( clk, rst, addr_lo, cs, rw, data_in )

begin

  if clk'event and clk = '0' then

    if rst = '1' then

      dat_reg0 <= "00000000";

      dat_reg1 <= "00000001";

      dat_reg2 <= "00000010";

      dat_reg3 <= "00000011";

      dat_reg4 <= "00000100";

      dat_reg5 <= "00000101";

      dat_reg6 <= "00000110";

      dat_reg7 <= "00000111";

      dat_reg8 <= "00001000";

      dat_reg9 <= "00001001";

      dat_reg10 <= "00001010";

      dat_reg11 <= "00001011";

      dat_reg12 <= "00001100";

      dat_reg13 <= "00001101";

      dat_reg14 <= "00001110";

      dat_reg15 <= "00001111";

    else

           if cs = '1' and rw = '0' then

        case addr_lo is

             when "0000" =>

                    dat_reg0 <= data_in;

             when "0001" =>

                    dat_reg1 <= data_in;

             when "0010" =>

                    dat_reg2 <= data_in;

             when "0011" =>

                    dat_reg3 <= data_in;

             when "0100" =>

                    dat_reg4 <= data_in;

             when "0101" =>

                    dat_reg5 <= data_in;

             when "0110" =>

                    dat_reg6 <= data_in;

             when "0111" =>

                    dat_reg7 <= data_in;

             when "1000" =>

                    dat_reg8 <= data_in;

             when "1001" =>

                    dat_reg9 <= data_in;

             when "1010" =>

                    dat_reg10 <= data_in;

             when "1011" =>

                    dat_reg11 <= data_in;

             when "1100" =>

                    dat_reg12 <= data_in;

             when "1101" =>

                    dat_reg13 <= data_in;

             when "1110" =>

                    dat_reg14 <= data_in;

             when "1111" =>

                    dat_reg15 <= data_in;

        when others =>

                    null;

                  end case;

           end if;

         end if;

  end if;

end process;

dat_read : process(  addr_hi,

                     dat_reg0, dat_reg1, dat_reg2, dat_reg3,

                     dat_reg4, dat_reg5, dat_reg6, dat_reg7,

                     dat_reg8, dat_reg9, dat_reg10, dat_reg11,

                     dat_reg12, dat_reg13, dat_reg14, dat_reg15 )

begin

      case addr_hi is

             when "0000" =>

                    data_out <= dat_reg0;

             when "0001" =>

                    data_out <= dat_reg1;

             when "0010" =>

                    data_out <= dat_reg2;

             when "0011" =>

                    data_out <= dat_reg3;

             when "0100" =>

                    data_out <= dat_reg4;

             when "0101" =>

                    data_out <= dat_reg5;

             when "0110" =>

                    data_out <= dat_reg6;

             when "0111" =>

                    data_out <= dat_reg7;

             when "1000" =>

                    data_out <= dat_reg8;

             when "1001" =>

                    data_out <= dat_reg9;

             when "1010" =>

                    data_out <= dat_reg10;

             when "1011" =>

                    data_out <= dat_reg11;

             when "1100" =>

                    data_out <= dat_reg12;

             when "1101" =>

                    data_out <= dat_reg13;

             when "1110" =>

                    data_out <= dat_reg14;

             when "1111" =>

                    data_out <= dat_reg15;

        when others =>

                    null;

                end case;

end process;

end datram_arch;