URL https://opencores.org/ocsvn/System11/System11/trunk

Subversion Repositories System11

[/] [System11/] [trunk/] [rtl/] [vhdl/] [rxunit3.vhd] - Blame information for rev 7

Go to most recent revision | Details | Compare with Previous | View Log


--===========================================================================--
--
--  S Y N T H E Z I A B L E    miniUART   C O R E
--
--  www.OpenCores.Org - January 2000
--  This core adheres to the GNU public license  
--
-- Design units   : miniUART core for the System68
--
-- File name      : rxunit3.vhd
--
-- Purpose        : Implements an miniUART device for communication purposes 
--                  between the cpu68 cpu and the Host computer through
--                  an RS-232 communication protocol.
--                  
-- Dependencies   : ieee.std_logic_1164.all;
--                  ieee.numeric_std.all;
--
--===========================================================================--
-------------------------------------------------------------------------------
-- Revision list
-- Version   Author                 Date                        Changes
--
-- 0.1      Ovidiu Lupas     15 January 2000                   New model
-- 2.0      Ovidiu Lupas     17 April   2000  samples counter cleared for bit 0
--        olupas@opencores.org
--
-- 3.0      John Kent         5 January 2003  Added 6850 word format control
-- 3.1      John Kent        12 January 2003  Significantly revamped receive code.
-- 3.2      John Kent        10 January 2004  Rewrite of code.
--        dilbert57@opencores.org
-------------------------------------------------------------------------------
-- Description    : Implements the receive unit of the miniUART core. Samples
--                  16 times the RxD line and retain the value in the middle of
--                  the time interval. 
library ieee;
   use ieee.std_logic_1164.all;
   use ieee.std_logic_unsigned.all;
 
-------------------------------------------------------------------------------
-- Receive unit
-------------------------------------------------------------------------------
entity RxUnit is
  port (
     Clk    : in  Std_Logic;  -- Clock signal
     Reset  : in  Std_Logic;  -- Reset input
     ReadD  : in  Std_Logic;  -- Read data signal
     WdFmt  : in  Std_Logic_Vector(2 downto 0); -- word format
     BdFmt  : in  Std_Logic_Vector(1 downto 0); -- baud format
     RxClk  : in  Std_Logic;  -- RS-232 clock input
     RxDat  : in  Std_Logic;  -- RS-232 data input
     FRErr  : out Std_Logic;  -- Status signal
     ORErr  : out Std_Logic;  -- Status signal
          PAErr  : out Std_logic;  -- Status signal
     DARdy  : out Std_Logic;  -- Status signal
     DAOut  : out Std_Logic_Vector(7 downto 0)
          );
end; --================== End of entity ==============================--
-------------------------------------------------------------------------------
-- Architecture for receive Unit
-------------------------------------------------------------------------------
architecture Behaviour of RxUnit is
  -----------------------------------------------------------------------------
  -- Signals
  -----------------------------------------------------------------------------
  signal RxDebDel0  : Std_Logic;             -- Debounce Delayed Rx Data
  signal RxDebDel1  : Std_Logic;             -- Debounce Delayed Rx Data
  signal RxDebDel2  : Std_Logic;             -- Debounce Delayed Rx Data
  signal RxDebDel3  : Std_Logic;             -- Debounce Delayed Rx Data
  signal RxDeb      : Std_Logic;             -- Debounced Rx Data
  signal RxDatDel   : Std_Logic;             -- Delayed Rx Data
  signal RxDatEdge  : Std_Logic;             -- Rx Data Edge pulse
  signal RxClkDel   : Std_Logic;             -- Delayed Rx Input Clock
  signal RxClkEdge  : Std_Logic;             -- Rx Input Clock Edge pulse
  signal RxClkCnt   : Std_Logic_Vector(5 downto 0); -- Rx Baud Clock Counter
  signal RxBdClk    : Std_Logic;             -- Rx Baud Clock
  signal RxBdDel    : Std_Logic;             -- Delayed Rx Baud Clock
  signal RxBdEdge   : Std_Logic;             -- Rx Baud Clock Edge pulse
  signal RxStart    : Std_Logic;                                        -- Rx Start bit detected
 
  signal tmpDRdy    : Std_Logic;             -- Data Ready flag
  signal RxValid    : Std_Logic;             -- Rx Data Valid
  signal tmpRxVal   : Std_Logic;             -- Rx Data Valid
  signal outErr     : Std_Logic;             -- Over run error bit
  signal frameErr   : Std_Logic;             -- Framing error bit
  signal ParityErr  : Std_Logic;             -- Parity Error Bit
  signal RxParity   : Std_Logic;             -- Calculated RX parity bit
  signal RxState    : Std_Logic_Vector(3 downto 0);  -- receive bit state
  signal ShtReg     : Std_Logic_Vector(7 downto 0);  -- Shift Register
  signal DataOut    : Std_Logic_Vector(7 downto 0);  -- Data Output register
 
begin
 
  ---------------------------------------------------------------------
  -- Receiver Data Debounce
  -- Input level must be stable for 4 Receive Clock cycles.
  ---------------------------------------------------------------------
  rxunit_data_debounce : process(Clk, Reset, RxClkEdge, RxDat,
                                 RxDebDel0, RxDebDel1, RxDebDel2, RxDebDel3 )
  begin
    if Reset = '1' then
           RxDebDel0 <= RxDat;
           RxDebDel1 <= RxDat;
           RxDebDel2 <= RxDat;
           RxDebDel3 <= RxDat;
         elsif Clk'event and Clk = '0' then
           if RxClkEdge = '1' then
             RxDebDel0  <= RxDat;
             RxDebDel1  <= RxDebDel0;
             RxDebDel2  <= RxDebDel1;
             RxDebDel3  <= RxDebDel2;
                  if (RxDebDel3 or RxDebDel2 or RxDebDel1 or RxDebDel0) = '0' then
                    RxDeb <= '0';
        elsif (RxDebDel3 and RxDebDel2 and RxDebDel1 and RxDebDel0) = '1' then
                    RxDeb <= '1';
        else
                    RxDeb <= RxDeb;
        end if;
      else
             RxDebDel0  <= RxDebDel0;
             RxDebDel1  <= RxDebDel1;
             RxDebDel2  <= RxDebDel2;
             RxDebDel3  <= RxDebDel3;
                  RxDeb      <= RxDeb;
      end if;
         end if;
  end process;
 
  ---------------------------------------------------------------------
  -- Receiver Data Edge Detection
  -- A falling edge will produce a one clock cycle pulse
  ---------------------------------------------------------------------
  rxunit_data_edge : process(Clk, Reset, RxDeb, RxDatDel )
  begin
    if Reset = '1' then
           RxDatDel  <= RxDeb;
                RxDatEdge <= '0';
         elsif Clk'event and Clk = '0' then
           RxDatDel  <= RxDeb;
                RxDatEdge <= RxDatDel and (not RxDeb);
         end if;
  end process;
 
  ---------------------------------------------------------------------
  -- Receiver Clock Edge Detection
  -- A rising edge will produce a one clock cycle pulse
  -- RxClock 
  ---------------------------------------------------------------------
  rxunit_clock_edge : process(Clk, Reset, RxClk, RxClkDel )
  begin
    if Reset = '1' then
           RxClkDel  <= RxClk;
                RxClkEdge <= '0';
         elsif Clk'event and Clk = '0' then
           RxClkDel  <= RxClk;
                RxClkEdge <= RxClk and (not RxClkDel);
         end if;
  end process;
 
 
  ---------------------------------------------------------------------
  -- Receiver Clock Divider
  -- Reset the Rx Clock divider on any data edge
  -- Note that debounce data will be skewed by 4 clock cycles.
  -- Advance the count only on an input clock pulse
  ---------------------------------------------------------------------
  rxunit_clock_divide : process(Clk, Reset, RxDatEdge, RxState, RxStart,
                                RxClkEdge, RxClkCnt )
  begin
    if Reset = '1' then
           RxClkCnt  <= "000000";
                RxStart   <= '0';
         elsif Clk'event and Clk = '0' then
 
           if RxState = "1111" then     -- idle state
                  if RxStart = '0' then      -- in hunt mode
                    if RxDatEdge = '1' then -- falling edge starts counter
                      RxStart <= '1';
          else
                           RxStart <= RxStart;    -- other wise remain halted
          end if;
        else
                    RxStart <= RxStart;           -- Acquired start, stay in this state
        end if;
      else
                  RxStart <= '0';                   -- non idle, reset start flag
      end if; -- RxState
 
      if RxState = "1111" and RxStart = '0' then
                  RxClkCnt <= "000011";  -- Reset to 3 to account for debounce skew
                else
                  if RxClkEdge = '1' then
                    RxClkCnt <= RxClkCnt + "000001";
        else
                    RxClkCnt <= RxClkCnt;
        end if; -- RxClkEdge
      end if; -- RxState
         end if;         -- clk / reset
  end process;
 
  ---------------------------------------------------------------------
  -- Receiver Clock Selector
  -- Select output then look for rising edge
  ---------------------------------------------------------------------
  rxunit_clock_select : process(Clk, Reset, BdFmt, RxClk, RxClkCnt,
                                RxBdDel, RxBdEdge )
  begin
  -- BdFmt
  -- 0 0     - Baud Clk divide by 1
  -- 0 1     - Baud Clk divide by 16
  -- 1 0     - Baud Clk divide by 64
  -- 1 1     - reset
    case BdFmt is
         when "00" =>     -- Div by 1
           RxBdClk <= RxClk;
         when "01" =>     -- Div by 16
           RxBdClk <= RxClkCnt(3);
         when "10" =>     -- Div by 64
           RxBdClk <= RxClkCnt(5);
         when others =>  -- reset
           RxBdClk <= '0';
    end case;
 
    if Reset = '1' then
           RxBdDel  <= RxBdClk;
                RxBdEdge <= '0';
         elsif Clk'event and Clk = '0' then
           RxBdDel  <= RxBdClk;
                RxBdEdge <= RxBdClk and (not RxBdDel);
         end if;
 
  end process;
 
 
  ---------------------------------------------------------------------
  -- Receiver process
  ---------------------------------------------------------------------
  rxunit_receive : process(Clk, Reset, RxState, RxBdEdge, RxDat )
  begin
    if Reset = '1' then
        frameErr  <= '0';
        outErr    <= '0';
                  parityErr <= '0';
 
        ShtReg    <= "00000000";  -- Shift register
                  DataOut   <= "00000000";
                  RxParity  <= '0';         -- Parity bit
                  RxValid   <= '0';         -- Data RX data valid flag
        RxState   <= "1111";
    elsif Clk'event and Clk='0' then
        if RxBdEdge = '1' then
          case RxState is
          when "0000" | "0001" | "0010" | "0011" |
                                        "0100" | "0101" | "0110" => -- data bits 0 to 6
            ShtReg    <= RxDat & ShtReg(7 downto 1);
                           RxParity  <= RxParity xor RxDat;
                                parityErr <= parityErr;
                                frameErr  <= frameErr;
                                outErr    <= outErr;
                                RxValid   <= '0';
                                DataOut   <= DataOut;
                                if RxState = "0110" then
                             if WdFmt(2) = '0' then
                RxState <= "1000";          -- 7 data + parity
                             else
                RxState <= "0111";          -- 8 data bits
                                  end if; -- WdFmt(2)
                                else
              RxState   <= RxState + "0001";
                                end if; -- RxState
 
          when "0111" =>                 -- data bit 7
            ShtReg    <= RxDat & ShtReg(7 downto 1);
                           RxParity  <= RxParity xor RxDat;
                                parityErr <= parityErr;
                                frameErr  <= frameErr;
                                outErr    <= outErr;
                                RxValid   <= '0';
                                DataOut   <= DataOut;
                           if WdFmt(1) = '1' then      -- parity bit ?
              RxState <= "1000";         -- yes, go to parity
                                else
              RxState <= "1001";         -- no, must be 2 stop bit bits
                           end if;
 
               when "1000" =>                 -- parity bit
                           if WdFmt(2) = '0' then
              ShtReg <= RxDat & ShtReg(7 downto 1); -- 7 data + parity
                                else
                                  ShtReg <= ShtReg;          -- 8 data + parity
                                end if;
                                RxParity <= RxParity;
                                if WdFmt(0) = '0' then      -- parity polarity ?
                                  if RxParity = RxDat then  -- check even parity
                                          parityErr <= '1';
                                  else
                                          parityErr <= '0';
                                  end if;
                                else
                                  if RxParity = RxDat then  -- check for odd parity
                                          parityErr <= '0';
                                  else
                                          parityErr <= '1';
                                  end if;
                                end if;
                                frameErr  <= frameErr;
                                outErr    <= outErr;
                                RxValid   <= '0';
                                DataOut   <= DataOut;
            RxState   <= "1001";
 
          when "1001" =>                 -- stop bit (Only one required for RX)
                           ShtReg    <= ShtReg;
                                RxParity  <= RxParity;
                                parityErr <= parityErr;
            if RxDat = '1' then         -- stop bit expected
              frameErr <= '0';           -- yes, no framing error
            else
              frameErr <= '1';           -- no, framing error
            end if;
            if tmpDRdy = '1' then        -- Has previous data been read ? 
              outErr <= '1';             -- no, overrun error
            else
              outErr <= '0';             -- yes, no over run error
            end if;
                                RxValid   <= '1';
                                DataOut   <= ShtReg;
            RxState   <= "1111";
 
          when others =>                 -- this is the idle state
            ShtReg    <= ShtReg;
                           RxParity  <= RxParity;
                                parityErr <= parityErr;
                                frameErr  <= frameErr;
                                outErr    <= outErr;
                                RxValid   <= '0';
                                DataOut   <= DataOut;
                           if RxDat = '0' then  -- look for start request
              RxState  <= "0000"; -- yes, read data
                           else
                                  RxState <= "1111";    -- otherwise idle
                           end if;
          end case; -- RxState
                  else  -- RxBdEdge
            ShtReg    <= ShtReg;
                           RxParity  <= RxParity;
                                parityErr <= parityErr;
                                frameErr  <= frameErr;
                                outErr    <= outErr;
                                RxValid   <= RxValid;
                                DataOut   <= DataOut;
                                RxState   <= RxState;
        end if; -- RxBdEdge
    end if; -- clk / reset
  end process;
 
 
  ---------------------------------------------------------------------
  -- Receiver Read process
  ---------------------------------------------------------------------
  rxunit_read : process(Clk, Reset, ReadD, RxValid, tmpRxVal, tmpDRdy )
  begin
    if Reset = '1' then
        tmpDRdy   <= '0';
                  tmpRxVal  <= '0';
    elsif Clk'event and Clk='0' then
        if ReadD = '1' then
                    -- Data was read, reset data ready
          tmpDRdy  <= '0';
                         tmpRxVal <= tmpRxVal;
                  else
                    if RxValid = '1' and tmpRxVal = '0' then
                           -- Data was received, set Data ready
                           tmpDRdy  <= '1';
                                tmpRxVal <= '1';
                         else
                           -- Test for falling edge of RxValid.
                      tmpDRdy <= tmpDRdy;
                           if RxValid = '0' and tmpRxVal = '1' then
                             tmpRxVal  <= '0';
                           else
                             tmpRxVal  <= tmpRxVal;
                                end if;
                         end if; -- RxValid
        end if; -- ReadD
    end if; -- clk / reset
  end process;
 
 
  DARdy <= tmpDRdy;
  DAOut <= DataOut;
  FRErr <= frameErr;
  ORErr <= outErr;
  PAErr <= parityErr;
 
end Behaviour; --==================== End of architecture ====================--

Browse

Tools

Subversion Repositories System11

[/] [System11/] [trunk/] [rtl/] [vhdl/] [rxunit3.vhd] - Blame information for rev 7

Line No.	Rev	Author	Line
1	4	dilbert57	`--===========================================================================--`
2			`--`
3			`-- S Y N T H E Z I A B L E miniUART C O R E`
4			`--`
5			`-- www.OpenCores.Org - January 2000`
6			`-- This core adheres to the GNU public license`
7			`--`
8			`-- Design units : miniUART core for the System68`
9			`--`
10			`-- File name : rxunit3.vhd`
11			`--`
12			`-- Purpose : Implements an miniUART device for communication purposes`
13			`-- between the cpu68 cpu and the Host computer through`
14			`-- an RS-232 communication protocol.`
15			`--`
16			`-- Dependencies : ieee.std_logic_1164.all;`
17			`-- ieee.numeric_std.all;`
18			`--`
19			`--===========================================================================--`
20			`-------------------------------------------------------------------------------`
21			`-- Revision list`
22			`-- Version Author Date Changes`
23			`--`
24			`-- 0.1 Ovidiu Lupas 15 January 2000 New model`
25			`-- 2.0 Ovidiu Lupas 17 April 2000 samples counter cleared for bit 0`
26			`-- olupas@opencores.org`
27			`--`
28			`-- 3.0 John Kent 5 January 2003 Added 6850 word format control`
29			`-- 3.1 John Kent 12 January 2003 Significantly revamped receive code.`
30			`-- 3.2 John Kent 10 January 2004 Rewrite of code.`
31			`-- dilbert57@opencores.org`
32			`-------------------------------------------------------------------------------`
33			`-- Description : Implements the receive unit of the miniUART core. Samples`
34			`-- 16 times the RxD line and retain the value in the middle of`
35			`-- the time interval.`
36			`library ieee;`
37			`use ieee.std_logic_1164.all;`
38			`use ieee.std_logic_unsigned.all;`
39
40			`-------------------------------------------------------------------------------`
41			`-- Receive unit`
42			`-------------------------------------------------------------------------------`
43			`entity RxUnit is`
44			`port (`
45			`Clk : in Std_Logic; -- Clock signal`
46			`Reset : in Std_Logic; -- Reset input`
47			`ReadD : in Std_Logic; -- Read data signal`
48			`WdFmt : in Std_Logic_Vector(2 downto 0); -- word format`
49			`BdFmt : in Std_Logic_Vector(1 downto 0); -- baud format`
50			`RxClk : in Std_Logic; -- RS-232 clock input`
51			`RxDat : in Std_Logic; -- RS-232 data input`
52			`FRErr : out Std_Logic; -- Status signal`
53			`ORErr : out Std_Logic; -- Status signal`
54			`PAErr : out Std_logic; -- Status signal`
55			`DARdy : out Std_Logic; -- Status signal`
56			`DAOut : out Std_Logic_Vector(7 downto 0)`
57			`);`
58			`end; --================== End of entity ==============================--`
59			`-------------------------------------------------------------------------------`
60			`-- Architecture for receive Unit`
61			`-------------------------------------------------------------------------------`
62			`architecture Behaviour of RxUnit is`
63			`-----------------------------------------------------------------------------`
64			`-- Signals`
65			`-----------------------------------------------------------------------------`
66			`signal RxDebDel0 : Std_Logic; -- Debounce Delayed Rx Data`
67			`signal RxDebDel1 : Std_Logic; -- Debounce Delayed Rx Data`
68			`signal RxDebDel2 : Std_Logic; -- Debounce Delayed Rx Data`
69			`signal RxDebDel3 : Std_Logic; -- Debounce Delayed Rx Data`
70			`signal RxDeb : Std_Logic; -- Debounced Rx Data`
71			`signal RxDatDel : Std_Logic; -- Delayed Rx Data`
72			`signal RxDatEdge : Std_Logic; -- Rx Data Edge pulse`
73			`signal RxClkDel : Std_Logic; -- Delayed Rx Input Clock`
74			`signal RxClkEdge : Std_Logic; -- Rx Input Clock Edge pulse`
75			`signal RxClkCnt : Std_Logic_Vector(5 downto 0); -- Rx Baud Clock Counter`
76			`signal RxBdClk : Std_Logic; -- Rx Baud Clock`
77			`signal RxBdDel : Std_Logic; -- Delayed Rx Baud Clock`
78			`signal RxBdEdge : Std_Logic; -- Rx Baud Clock Edge pulse`
79			`signal RxStart : Std_Logic; -- Rx Start bit detected`
80
81			`signal tmpDRdy : Std_Logic; -- Data Ready flag`
82			`signal RxValid : Std_Logic; -- Rx Data Valid`
83			`signal tmpRxVal : Std_Logic; -- Rx Data Valid`
84			`signal outErr : Std_Logic; -- Over run error bit`
85			`signal frameErr : Std_Logic; -- Framing error bit`
86			`signal ParityErr : Std_Logic; -- Parity Error Bit`
87			`signal RxParity : Std_Logic; -- Calculated RX parity bit`
88			`signal RxState : Std_Logic_Vector(3 downto 0); -- receive bit state`
89			`signal ShtReg : Std_Logic_Vector(7 downto 0); -- Shift Register`
90			`signal DataOut : Std_Logic_Vector(7 downto 0); -- Data Output register`
91
92			`begin`
93
94			`---------------------------------------------------------------------`
95			`-- Receiver Data Debounce`
96			`-- Input level must be stable for 4 Receive Clock cycles.`
97			`---------------------------------------------------------------------`
98			`rxunit_data_debounce : process(Clk, Reset, RxClkEdge, RxDat,`
99			`RxDebDel0, RxDebDel1, RxDebDel2, RxDebDel3 )`
100			`begin`
101			`if Reset = '1' then`
102			`RxDebDel0 <= RxDat;`
103			`RxDebDel1 <= RxDat;`
104			`RxDebDel2 <= RxDat;`
105			`RxDebDel3 <= RxDat;`
106			`elsif Clk'event and Clk = '0' then`
107			`if RxClkEdge = '1' then`
108			`RxDebDel0 <= RxDat;`
109			`RxDebDel1 <= RxDebDel0;`
110			`RxDebDel2 <= RxDebDel1;`
111			`RxDebDel3 <= RxDebDel2;`
112			`if (RxDebDel3 or RxDebDel2 or RxDebDel1 or RxDebDel0) = '0' then`
113			`RxDeb <= '0';`
114			`elsif (RxDebDel3 and RxDebDel2 and RxDebDel1 and RxDebDel0) = '1' then`
115			`RxDeb <= '1';`
116			`else`
117			`RxDeb <= RxDeb;`
118			`end if;`
119			`else`
120			`RxDebDel0 <= RxDebDel0;`
121			`RxDebDel1 <= RxDebDel1;`
122			`RxDebDel2 <= RxDebDel2;`
123			`RxDebDel3 <= RxDebDel3;`
124			`RxDeb <= RxDeb;`
125			`end if;`
126			`end if;`
127			`end process;`
128
129			`---------------------------------------------------------------------`
130			`-- Receiver Data Edge Detection`
131			`-- A falling edge will produce a one clock cycle pulse`
132			`---------------------------------------------------------------------`
133			`rxunit_data_edge : process(Clk, Reset, RxDeb, RxDatDel )`
134			`begin`
135			`if Reset = '1' then`
136			`RxDatDel <= RxDeb;`
137			`RxDatEdge <= '0';`
138			`elsif Clk'event and Clk = '0' then`
139			`RxDatDel <= RxDeb;`
140			`RxDatEdge <= RxDatDel and (not RxDeb);`
141			`end if;`
142			`end process;`
143
144			`---------------------------------------------------------------------`
145			`-- Receiver Clock Edge Detection`
146			`-- A rising edge will produce a one clock cycle pulse`
147			`-- RxClock`
148			`---------------------------------------------------------------------`
149			`rxunit_clock_edge : process(Clk, Reset, RxClk, RxClkDel )`
150			`begin`
151			`if Reset = '1' then`
152			`RxClkDel <= RxClk;`
153			`RxClkEdge <= '0';`
154			`elsif Clk'event and Clk = '0' then`
155			`RxClkDel <= RxClk;`
156			`RxClkEdge <= RxClk and (not RxClkDel);`
157			`end if;`
158			`end process;`
159
160
161			`---------------------------------------------------------------------`
162			`-- Receiver Clock Divider`
163			`-- Reset the Rx Clock divider on any data edge`
164			`-- Note that debounce data will be skewed by 4 clock cycles.`
165			`-- Advance the count only on an input clock pulse`
166			`---------------------------------------------------------------------`
167			`rxunit_clock_divide : process(Clk, Reset, RxDatEdge, RxState, RxStart,`
168			`RxClkEdge, RxClkCnt )`
169			`begin`
170			`if Reset = '1' then`
171			`RxClkCnt <= "000000";`
172			`RxStart <= '0';`
173			`elsif Clk'event and Clk = '0' then`
174
175			`if RxState = "1111" then -- idle state`
176			`if RxStart = '0' then -- in hunt mode`
177			`if RxDatEdge = '1' then -- falling edge starts counter`
178			`RxStart <= '1';`
179			`else`
180			`RxStart <= RxStart; -- other wise remain halted`
181			`end if;`
182			`else`
183			`RxStart <= RxStart; -- Acquired start, stay in this state`
184			`end if;`
185			`else`
186			`RxStart <= '0'; -- non idle, reset start flag`
187			`end if; -- RxState`
188
189			`if RxState = "1111" and RxStart = '0' then`
190			`RxClkCnt <= "000011"; -- Reset to 3 to account for debounce skew`
191			`else`
192			`if RxClkEdge = '1' then`
193			`RxClkCnt <= RxClkCnt + "000001";`
194			`else`
195			`RxClkCnt <= RxClkCnt;`
196			`end if; -- RxClkEdge`
197			`end if; -- RxState`
198			`end if; -- clk / reset`
199			`end process;`
200
201			`---------------------------------------------------------------------`
202			`-- Receiver Clock Selector`
203			`-- Select output then look for rising edge`
204			`---------------------------------------------------------------------`
205			`rxunit_clock_select : process(Clk, Reset, BdFmt, RxClk, RxClkCnt,`
206			`RxBdDel, RxBdEdge )`
207			`begin`
208			`-- BdFmt`
209			`-- 0 0 - Baud Clk divide by 1`
210			`-- 0 1 - Baud Clk divide by 16`
211			`-- 1 0 - Baud Clk divide by 64`
212			`-- 1 1 - reset`
213			`case BdFmt is`
214			`when "00" => -- Div by 1`
215			`RxBdClk <= RxClk;`
216			`when "01" => -- Div by 16`
217			`RxBdClk <= RxClkCnt(3);`
218			`when "10" => -- Div by 64`
219			`RxBdClk <= RxClkCnt(5);`
220			`when others => -- reset`
221			`RxBdClk <= '0';`
222			`end case;`
223
224			`if Reset = '1' then`
225			`RxBdDel <= RxBdClk;`
226			`RxBdEdge <= '0';`
227			`elsif Clk'event and Clk = '0' then`
228			`RxBdDel <= RxBdClk;`
229			`RxBdEdge <= RxBdClk and (not RxBdDel);`
230			`end if;`
231
232			`end process;`
233
234
235			`---------------------------------------------------------------------`
236			`-- Receiver process`
237			`---------------------------------------------------------------------`
238			`rxunit_receive : process(Clk, Reset, RxState, RxBdEdge, RxDat )`
239			`begin`
240			`if Reset = '1' then`
241			`frameErr <= '0';`
242			`outErr <= '0';`
243			`parityErr <= '0';`
244
245			`ShtReg <= "00000000"; -- Shift register`
246			`DataOut <= "00000000";`
247			`RxParity <= '0'; -- Parity bit`
248			`RxValid <= '0'; -- Data RX data valid flag`
249			`RxState <= "1111";`
250			`elsif Clk'event and Clk='0' then`
251			`if RxBdEdge = '1' then`
252			`case RxState is`
253			`when "0000" \| "0001" \| "0010" \| "0011" \|`
254			`"0100" \| "0101" \| "0110" => -- data bits 0 to 6`
255			`ShtReg <= RxDat & ShtReg(7 downto 1);`
256			`RxParity <= RxParity xor RxDat;`
257			`parityErr <= parityErr;`
258			`frameErr <= frameErr;`
259			`outErr <= outErr;`
260			`RxValid <= '0';`
261			`DataOut <= DataOut;`
262			`if RxState = "0110" then`
263			`if WdFmt(2) = '0' then`
264			`RxState <= "1000"; -- 7 data + parity`
265			`else`
266			`RxState <= "0111"; -- 8 data bits`
267			`end if; -- WdFmt(2)`
268			`else`
269			`RxState <= RxState + "0001";`
270			`end if; -- RxState`
271
272			`when "0111" => -- data bit 7`
273			`ShtReg <= RxDat & ShtReg(7 downto 1);`
274			`RxParity <= RxParity xor RxDat;`
275			`parityErr <= parityErr;`
276			`frameErr <= frameErr;`
277			`outErr <= outErr;`
278			`RxValid <= '0';`
279			`DataOut <= DataOut;`
280			`if WdFmt(1) = '1' then -- parity bit ?`
281			`RxState <= "1000"; -- yes, go to parity`
282			`else`
283			`RxState <= "1001"; -- no, must be 2 stop bit bits`
284			`end if;`
285
286			`when "1000" => -- parity bit`
287			`if WdFmt(2) = '0' then`
288			`ShtReg <= RxDat & ShtReg(7 downto 1); -- 7 data + parity`
289			`else`
290			`ShtReg <= ShtReg; -- 8 data + parity`
291			`end if;`
292			`RxParity <= RxParity;`
293			`if WdFmt(0) = '0' then -- parity polarity ?`
294			`if RxParity = RxDat then -- check even parity`
295			`parityErr <= '1';`
296			`else`
297			`parityErr <= '0';`
298			`end if;`
299			`else`
300			`if RxParity = RxDat then -- check for odd parity`
301			`parityErr <= '0';`
302			`else`
303			`parityErr <= '1';`
304			`end if;`
305			`end if;`
306			`frameErr <= frameErr;`
307			`outErr <= outErr;`
308			`RxValid <= '0';`
309			`DataOut <= DataOut;`
310			`RxState <= "1001";`
311
312			`when "1001" => -- stop bit (Only one required for RX)`
313			`ShtReg <= ShtReg;`
314			`RxParity <= RxParity;`
315			`parityErr <= parityErr;`
316			`if RxDat = '1' then -- stop bit expected`
317			`frameErr <= '0'; -- yes, no framing error`
318			`else`
319			`frameErr <= '1'; -- no, framing error`
320			`end if;`
321			`if tmpDRdy = '1' then -- Has previous data been read ?`
322			`outErr <= '1'; -- no, overrun error`
323			`else`
324			`outErr <= '0'; -- yes, no over run error`
325			`end if;`
326			`RxValid <= '1';`
327			`DataOut <= ShtReg;`
328			`RxState <= "1111";`
329
330			`when others => -- this is the idle state`
331			`ShtReg <= ShtReg;`
332			`RxParity <= RxParity;`
333			`parityErr <= parityErr;`
334			`frameErr <= frameErr;`
335			`outErr <= outErr;`
336			`RxValid <= '0';`
337			`DataOut <= DataOut;`
338			`if RxDat = '0' then -- look for start request`
339			`RxState <= "0000"; -- yes, read data`
340			`else`
341			`RxState <= "1111"; -- otherwise idle`
342			`end if;`
343			`end case; -- RxState`
344			`else -- RxBdEdge`
345			`ShtReg <= ShtReg;`
346			`RxParity <= RxParity;`
347			`parityErr <= parityErr;`
348			`frameErr <= frameErr;`
349			`outErr <= outErr;`
350			`RxValid <= RxValid;`
351			`DataOut <= DataOut;`
352			`RxState <= RxState;`
353			`end if; -- RxBdEdge`
354			`end if; -- clk / reset`
355			`end process;`
356
357
358			`---------------------------------------------------------------------`
359			`-- Receiver Read process`
360			`---------------------------------------------------------------------`
361			`rxunit_read : process(Clk, Reset, ReadD, RxValid, tmpRxVal, tmpDRdy )`
362			`begin`
363			`if Reset = '1' then`
364			`tmpDRdy <= '0';`
365			`tmpRxVal <= '0';`
366			`elsif Clk'event and Clk='0' then`
367			`if ReadD = '1' then`
368			`-- Data was read, reset data ready`
369			`tmpDRdy <= '0';`
370			`tmpRxVal <= tmpRxVal;`
371			`else`
372			`if RxValid = '1' and tmpRxVal = '0' then`
373			`-- Data was received, set Data ready`
374			`tmpDRdy <= '1';`
375			`tmpRxVal <= '1';`
376			`else`
377			`-- Test for falling edge of RxValid.`
378			`tmpDRdy <= tmpDRdy;`
379			`if RxValid = '0' and tmpRxVal = '1' then`
380			`tmpRxVal <= '0';`
381			`else`
382			`tmpRxVal <= tmpRxVal;`
383			`end if;`
384			`end if; -- RxValid`
385			`end if; -- ReadD`
386			`end if; -- clk / reset`
387			`end process;`
388
389
390			`DARdy <= tmpDRdy;`
391			`DAOut <= DataOut;`
392			`FRErr <= frameErr;`
393			`ORErr <= outErr;`
394			`PAErr <= parityErr;`
395
396			`end Behaviour; --==================== End of architecture ====================--`