Subversion Repositories a-z80

; Copyright 1991-2009 Mentor Graphics Corporation

;

; All Rights Reserved.

;

; THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF

; MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS SUBJECT TO LICENSE TERMS.

;

[Library]

std = $MODEL_TECH/../std

ieee = $MODEL_TECH/../ieee

verilog = $MODEL_TECH/../verilog

vital2000 = $MODEL_TECH/../vital2000

std_developerskit = $MODEL_TECH/../std_developerskit

synopsys = $MODEL_TECH/../synopsys

modelsim_lib = $MODEL_TECH/../modelsim_lib

sv_std = $MODEL_TECH/../sv_std

; Altera Primitive libraries

;

; VHDL Section

;

altera_mf = $MODEL_TECH/../altera/vhdl/altera_mf

altera = $MODEL_TECH/../altera/vhdl/altera

altera_lnsim = $MODEL_TECH/../altera/vhdl/altera_lnsim

lpm = $MODEL_TECH/../altera/vhdl/220model

220model = $MODEL_TECH/../altera/vhdl/220model

max = $MODEL_TECH/../altera/vhdl/max

maxii = $MODEL_TECH/../altera/vhdl/maxii

maxv = $MODEL_TECH/../altera/vhdl/maxv

stratix = $MODEL_TECH/../altera/vhdl/stratix

stratixii = $MODEL_TECH/../altera/vhdl/stratixii

stratixiigx = $MODEL_TECH/../altera/vhdl/stratixiigx

hardcopyii = $MODEL_TECH/../altera/vhdl/hardcopyii

hardcopyiii = $MODEL_TECH/../altera/vhdl/hardcopyiii

hardcopyiv = $MODEL_TECH/../altera/vhdl/hardcopyiv

cyclone = $MODEL_TECH/../altera/vhdl/cyclone

cycloneii = $MODEL_TECH/../altera/vhdl/cycloneii

cycloneiii = $MODEL_TECH/../altera/vhdl/cycloneiii

cycloneiiils = $MODEL_TECH/../altera/vhdl/cycloneiiils

sgate = $MODEL_TECH/../altera/vhdl/sgate

stratixgx = $MODEL_TECH/../altera/vhdl/stratixgx

altgxb = $MODEL_TECH/../altera/vhdl/altgxb

stratixgx_gxb = $MODEL_TECH/../altera/vhdl/stratixgx_gxb

stratixiigx_hssi = $MODEL_TECH/../altera/vhdl/stratixiigx_hssi

arriagx_hssi = $MODEL_TECH/../altera/vhdl/arriagx_hssi

arriaii = $MODEL_TECH/../altera/vhdl/arriaii

arriaii_hssi = $MODEL_TECH/../altera/vhdl/arriaii_hssi

arriaii_pcie_hip = $MODEL_TECH/../altera/vhdl/arriaii_pcie_hip

arriaiigz = $MODEL_TECH/../altera/vhdl/arriaiigz

arriaiigz_hssi = $MODEL_TECH/../altera/vhdl/arriaiigz_hssi

arriaiigz_pcie_hip = $MODEL_TECH/../altera/vhdl/arriaiigz_pcie_hip

arriagx = $MODEL_TECH/../altera/vhdl/arriagx

altgxb_lib = $MODEL_TECH/../altera/vhdl/altgxb

stratixiv = $MODEL_TECH/../altera/vhdl/stratixiv

stratixiv_hssi = $MODEL_TECH/../altera/vhdl/stratixiv_hssi

stratixiv_pcie_hip = $MODEL_TECH/../altera/vhdl/stratixiv_pcie_hip

cycloneiv = $MODEL_TECH/../altera/vhdl/cycloneiv

cycloneiv_hssi = $MODEL_TECH/../altera/vhdl/cycloneiv_hssi

cycloneiv_pcie_hip = $MODEL_TECH/../altera/vhdl/cycloneiv_pcie_hip

cycloneive = $MODEL_TECH/../altera/vhdl/cycloneive

hardcopyiv_hssi = $MODEL_TECH/../altera/vhdl/hardcopyiv_hssi

hardcopyiv_pcie_hip = $MODEL_TECH/../altera/vhdl/hardcopyiv_pcie_hip

stratixv = $MODEL_TECH/../altera/vhdl/stratixv

stratixv_hssi = $MODEL_TECH/../altera/vhdl/stratixv_hssi

stratixv_pcie_hip = $MODEL_TECH/../altera/vhdl/stratixv_pcie_hip

arriavgz = $MODEL_TECH/../altera/vhdl/arriavgz

arriavgz_hssi = $MODEL_TECH/../altera/vhdl/arriavgz_hssi

arriavgz_pcie_hip = $MODEL_TECH/../altera/vhdl/arriavgz_pcie_hip

arriav = $MODEL_TECH/../altera/vhdl/arriav

cyclonev = $MODEL_TECH/../altera/vhdl/cyclonev

;

; Verilog Section

;

altera_mf_ver = $MODEL_TECH/../altera/verilog/altera_mf

altera_ver = $MODEL_TECH/../altera/verilog/altera

altera_lnsim_ver = $MODEL_TECH/../altera/verilog/altera_lnsim

lpm_ver = $MODEL_TECH/../altera/verilog/220model

220model_ver = $MODEL_TECH/../altera/verilog/220model

max_ver = $MODEL_TECH/../altera/verilog/max

maxii_ver = $MODEL_TECH/../altera/verilog/maxii

maxv_ver = $MODEL_TECH/../altera/verilog/maxv

stratix_ver = $MODEL_TECH/../altera/verilog/stratix

stratixii_ver = $MODEL_TECH/../altera/verilog/stratixii

stratixiigx_ver = $MODEL_TECH/../altera/verilog/stratixiigx

arriagx_ver = $MODEL_TECH/../altera/verilog/arriagx

hardcopyii_ver = $MODEL_TECH/../altera/verilog/hardcopyii

hardcopyiii_ver = $MODEL_TECH/../altera/verilog/hardcopyiii

hardcopyiv_ver = $MODEL_TECH/../altera/verilog/hardcopyiv

cyclone_ver = $MODEL_TECH/../altera/verilog/cyclone

cycloneii_ver = $MODEL_TECH/../altera/verilog/cycloneii

cycloneiii_ver = $MODEL_TECH/../altera/verilog/cycloneiii

cycloneiiils_ver = $MODEL_TECH/../altera/verilog/cycloneiiils

sgate_ver = $MODEL_TECH/../altera/verilog/sgate

stratixgx_ver = $MODEL_TECH/../altera/verilog/stratixgx

altgxb_ver = $MODEL_TECH/../altera/verilog/altgxb

stratixgx_gxb_ver = $MODEL_TECH/../altera/verilog/stratixgx_gxb

stratixiigx_hssi_ver = $MODEL_TECH/../altera/verilog/stratixiigx_hssi

arriagx_hssi_ver = $MODEL_TECH/../altera/verilog/arriagx_hssi

arriaii_ver = $MODEL_TECH/../altera/verilog/arriaii

arriaii_hssi_ver = $MODEL_TECH/../altera/verilog/arriaii_hssi

arriaii_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriaii_pcie_hip

arriaiigz_ver = $MODEL_TECH/../altera/verilog/arriaiigz

arriaiigz_hssi_ver = $MODEL_TECH/../altera/verilog/arriaiigz_hssi

arriaiigz_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriaiigz_pcie_hip

stratixiii_ver = $MODEL_TECH/../altera/verilog/stratixiii

stratixiii = $MODEL_TECH/../altera/vhdl/stratixiii

stratixiv_ver = $MODEL_TECH/../altera/verilog/stratixiv

stratixiv_hssi_ver = $MODEL_TECH/../altera/verilog/stratixiv_hssi

stratixiv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/stratixiv_pcie_hip

stratixv_ver = $MODEL_TECH/../altera/verilog/stratixv

stratixv_hssi_ver = $MODEL_TECH/../altera/verilog/stratixv_hssi

stratixv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/stratixv_pcie_hip

arriavgz_ver = $MODEL_TECH/../altera/verilog/arriavgz

arriavgz_hssi_ver = $MODEL_TECH/../altera/verilog/arriavgz_hssi

arriavgz_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriavgz_pcie_hip

arriav_ver = $MODEL_TECH/../altera/verilog/arriav

arriav_hssi_ver = $MODEL_TECH/../altera/verilog/arriav_hssi

arriav_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriav_pcie_hip

cyclonev_ver = $MODEL_TECH/../altera/verilog/cyclonev

cyclonev_hssi_ver = $MODEL_TECH/../altera/verilog/cyclonev_hssi

cyclonev_pcie_hip_ver = $MODEL_TECH/../altera/verilog/cyclonev_pcie_hip

cycloneiv_ver = $MODEL_TECH/../altera/verilog/cycloneiv

cycloneiv_hssi_ver = $MODEL_TECH/../altera/verilog/cycloneiv_hssi

cycloneiv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/cycloneiv_pcie_hip

cycloneive_ver = $MODEL_TECH/../altera/verilog/cycloneive

hardcopyiv_hssi_ver = $MODEL_TECH/../altera/verilog/hardcopyiv_hssi

hardcopyiv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/hardcopyiv_pcie_hip

work = work

[vcom]

; VHDL93 variable selects language version as the default.

; Default is VHDL-2002.

; Value of 0 or 1987 for VHDL-1987.

; Value of 1 or 1993 for VHDL-1993.

; Default or value of 2 or 2002 for VHDL-2002.

; Default or value of 3 or 2008 for VHDL-2008.

VHDL93 = 2002

; Show source line containing error. Default is off.

; Show_source = 1

; Turn off unbound-component warnings. Default is on.

; Show_Warning1 = 0

; Turn off process-without-a-wait-statement warnings. Default is on.

; Show_Warning2 = 0

; Turn off null-range warnings. Default is on.

; Show_Warning3 = 0

; Turn off no-space-in-time-literal warnings. Default is on.

; Show_Warning4 = 0

; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on.

; Show_Warning5 = 0

; Turn off optimization for IEEE std_logic_1164 package. Default is on.

; Optimize_1164 = 0

; Turn on resolving of ambiguous function overloading in favor of the

; "explicit" function declaration (not the one automatically created by

; the compiler for each type declaration). Default is off.

; The .ini file has Explicit enabled so that std_logic_signed/unsigned

; will match the behavior of synthesis tools.

Explicit = 1

; Turn off acceleration of the VITAL packages. Default is to accelerate.

; NoVital = 1

; Turn off VITAL compliance checking. Default is checking on.

; NoVitalCheck = 1

; Ignore VITAL compliance checking errors. Default is to not ignore.

; IgnoreVitalErrors = 1

; Turn off VITAL compliance checking warnings. Default is to show warnings.

; Show_VitalChecksWarnings = 0

; Keep silent about case statement static warnings.

; Default is to give a warning.

; NoCaseStaticError = 1

; Keep silent about warnings caused by aggregates that are not locally static.

; Default is to give a warning.

; NoOthersStaticError = 1

; Turn off inclusion of debugging info within design units.

; Default is to include debugging info.

; NoDebug = 1

; Turn off "Loading..." messages. Default is messages on.

; Quiet = 1

; Turn on some limited synthesis rule compliance checking. Checks only:

;    -- signals used (read) by a process must be in the sensitivity list

; CheckSynthesis = 1

; Activate optimizations on expressions that do not involve signals,

; waits, or function/procedure/task invocations. Default is off.

; ScalarOpts = 1

; Require the user to specify a configuration for all bindings,

; and do not generate a compile time default binding for the

; component. This will result in an elaboration error of

; 'component not bound' if the user fails to do so. Avoids the rare

; issue of a false dependency upon the unused default binding.

; RequireConfigForAllDefaultBinding = 1

; Inhibit range checking on subscripts of arrays. Range checking on

; scalars defined with subtypes is inhibited by default.

; NoIndexCheck = 1

; Inhibit range checks on all (implicit and explicit) assignments to

; scalar objects defined with subtypes.

; NoRangeCheck = 1

[vlog]

; Turn off inclusion of debugging info within design units.

; Default is to include debugging info.

; NoDebug = 1

; Turn off "loading..." messages. Default is messages on.

; Quiet = 1

; Turn on Verilog hazard checking (order-dependent accessing of global vars).

; Default is off.

; Hazard = 1

; Turn on converting regular Verilog identifiers to uppercase. Allows case

; insensitivity for module names. Default is no conversion.

; UpCase = 1

; Turn on incremental compilation of modules. Default is off.

; Incremental = 1

; Turns on lint-style checking.

; Show_Lint = 1

[vsim]

; Simulator resolution

; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100.

Resolution = ps

; User time unit for run commands

; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the

; unit specified for Resolution. For example, if Resolution is 100ps,

; then UserTimeUnit defaults to ps.

; Should generally be set to default.

UserTimeUnit = default

; Default run length

RunLength = 0 ns

; Maximum iterations that can be run without advancing simulation time

IterationLimit = 5000

; Directive to license manager:

; vhdl          Immediately reserve a VHDL license

; vlog          Immediately reserve a Verilog license

; plus          Immediately reserve a VHDL and Verilog license

; nomgc         Do not look for Mentor Graphics Licenses

; nomti         Do not look for Model Technology Licenses

; noqueue       Do not wait in the license queue when a license isn't available

; viewsim       Try for viewer license but accept simulator license(s) instead

;               of queuing for viewer license

; License = plus

; Stop the simulator after a VHDL/Verilog assertion message

; 0 = Note  1 = Warning  2 = Error  3 = Failure  4 = Fatal

BreakOnAssertion = 4

; Assertion Message Format

; %S - Severity Level

; %R - Report Message

; %T - Time of assertion

; %D - Delta

; %I - Instance or Region pathname (if available)

; %% - print '%' character

; AssertionFormat = "** %S: %R\n   Time: %T  Iteration: %D%I\n"

; Assertion File - alternate file for storing VHDL/Verilog assertion messages

; AssertFile = assert.log

; Default radix for all windows and commands...

; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned

DefaultRadix = symbolic

; VSIM Startup command

; Startup = do startup.do

; File for saving command transcript

TranscriptFile = transcript

; File for saving command history

; CommandHistory = cmdhist.log

; Specify whether paths in simulator commands should be described

; in VHDL or Verilog format.

; For VHDL, PathSeparator = /

; For Verilog, PathSeparator = .

; Must not be the same character as DatasetSeparator.

PathSeparator = /

; Specify the dataset separator for fully rooted contexts.

; The default is ':'. For example, sim:/top

; Must not be the same character as PathSeparator.

DatasetSeparator = :

; Disable VHDL assertion messages

; IgnoreNote = 1

; IgnoreWarning = 1

; IgnoreError = 1

; IgnoreFailure = 1

; Default force kind. May be freeze, drive, deposit, or default

; or in other terms, fixed, wired, or charged.

; A value of "default" will use the signal kind to determine the

; force kind, drive for resolved signals, freeze for unresolved signals

; DefaultForceKind = freeze

; If zero, open files when elaborated; otherwise, open files on

; first read or write.  Default is 0.

; DelayFileOpen = 1

; Control VHDL files opened for write.

;   0 = Buffered, 1 = Unbuffered

UnbufferedOutput = 0

; Control the number of VHDL files open concurrently.

; This number should always be less than the current ulimit

; setting for max file descriptors.

;   0 = unlimited

ConcurrentFileLimit = 40

; Control the number of hierarchical regions displayed as

; part of a signal name shown in the Wave window.

; A value of zero tells VSIM to display the full name.

; The default is 0.

; WaveSignalNameWidth = 0

; Turn off warnings from the std_logic_arith, std_logic_unsigned

; and std_logic_signed packages.

; StdArithNoWarnings = 1

; Turn off warnings from the IEEE numeric_std and numeric_bit packages.

; NumericStdNoWarnings = 1

; Control the format of the (VHDL) FOR generate statement label

; for each iteration.  Do not quote it.

; The format string here must contain the conversion codes %s and %d,

; in that order, and no other conversion codes.  The %s represents

; the generate_label; the %d represents the generate parameter value

; at a particular generate iteration (this is the position number if

; the generate parameter is of an enumeration type).  Embedded whitespace

; is allowed (but discouraged); leading and trailing whitespace is ignored.

; Application of the format must result in a unique scope name over all

; such names in the design so that name lookup can function properly.

; GenerateFormat = %s__%d

; Specify whether checkpoint files should be compressed.

; The default is 1 (compressed).

; CheckpointCompressMode = 0

; List of dynamically loaded objects for Verilog PLI applications

; Veriuser = veriuser.sl

; Specify default options for the restart command. Options can be one

; or more of: -force -nobreakpoint -nolist -nolog -nowave

; DefaultRestartOptions = -force

; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs

; (> 500 megabyte memory footprint). Default is disabled.

; Specify number of megabytes to lock.

; LockedMemory = 1000

; Turn on (1) or off (0) WLF file compression.

; The default is 1 (compress WLF file).

; WLFCompress = 0

; Specify whether to save all design hierarchy (1) in the WLF file

; or only regions containing logged signals (0).

; The default is 0 (save only regions with logged signals).

; WLFSaveAllRegions = 1

; WLF file time limit.  Limit WLF file by time, as closely as possible,

; to the specified amount of simulation time.  When the limit is exceeded

; the earliest times get truncated from the file.

; If both time and size limits are specified the most restrictive is used.

; UserTimeUnits are used if time units are not specified.

; The default is 0 (no limit).  Example: WLFTimeLimit = {100 ms}

; WLFTimeLimit = 0

; WLF file size limit.  Limit WLF file size, as closely as possible,

; to the specified number of megabytes.  If both time and size limits

; are specified then the most restrictive is used.

; The default is 0 (no limit).

; WLFSizeLimit = 1000

; Specify whether or not a WLF file should be deleted when the

; simulation ends.  A value of 1 will cause the WLF file to be deleted.

; The default is 0 (do not delete WLF file when simulation ends).

; WLFDeleteOnQuit = 1

; Automatic SDF compilation

; Disables automatic compilation of SDF files in flows that support it.

; Default is on, uncomment to turn off.

; NoAutoSDFCompile = 1

DelayFileOpen = 1

[lmc]

[msg_system]

; Change a message severity or suppress a message.

; The format is:  = [,...]

; Examples:

;   note = 3009

;   warning = 3033

;   error = 3010,3016

;   fatal = 3016,3033

;   suppress = 3009,3016,3043

; The command verror  can be used to get the complete

; description of a message.

; Control transcripting of elaboration/runtime messages.

; The default is to have messages appear in the transcript and

; recorded in the wlf file (messages that are recorded in the

; wlf file can be viewed in the MsgViewer).  The other settings

; are to send messages only to the transcript or only to the

; wlf file.  The valid values are

;    both  {default}

;    tran  {transcript only}

;    wlf   {wlf file only}

; msgmode = both

[Project]

; Warning -- Do not edit the project properties directly.

;            Property names are dynamic in nature and property

;            values have special syntax.  Changing property data directly

;            can result in a corrupt MPF file.  All project properties

;            can be modified through project window dialogs.

Project_Version = 6

Project_DefaultLib = work

Project_SortMethod = unused

Project_Files_Count = 8

Project_File_0 = $ROOT/cpu/control/interrupts.v

Project_File_P_0 = compile_order 1 compile_to work cover_branch 0 cover_cond 0 cover_covercells 0 cover_excludedefault 0 cover_expr 0 cover_exttoggle 0 cover_fsm 0 cover_nofec 0 cover_noshort 0 cover_optlevel 3 cover_stmt 0 cover_toggle 0 dont_compile 0 file_type verilog folder interrupts group_id 0 last_compile 1 ood 0 toggle - vlog_0InOptions {} vlog_1995compat 0 vlog_disableopt 0 vlog_enable0In 0 vlog_hazard 0 vlog_nodebug 0 vlog_noload 0 vlog_options {} vlog_protect 0 vlog_showsource 0 vlog_upper 0 voptflow 1

Project_File_1 = $ROOT/cpu/control/pin_control.v

Project_File_P_1 = compile_order 6 compile_to work cover_branch 0 cover_cond 0 cover_covercells 0 cover_excludedefault 0 cover_expr 0 cover_exttoggle 0 cover_fsm 0 cover_nofec 0 cover_noshort 0 cover_optlevel 3 cover_stmt 0 cover_toggle 0 dont_compile 0 file_type verilog folder {pin control} group_id 0 last_compile 1 ood 0 toggle - vlog_0InOptions {} vlog_1995compat 0 vlog_disableopt 0 vlog_enable0In 0 vlog_hazard 0 vlog_nodebug 0 vlog_noload 0 vlog_options {} vlog_protect 0 vlog_showsource 0 vlog_upper 0 voptflow 1

Project_File_2 = $ROOT/cpu/control/resets.v

Project_File_P_2 = compile_order 4 compile_to work cover_branch 0 cover_cond 0 cover_covercells 0 cover_excludedefault 0 cover_expr 0 cover_exttoggle 0 cover_fsm 0 cover_nofec 0 cover_noshort 0 cover_optlevel 3 cover_stmt 0 cover_toggle 0 dont_compile 0 file_type verilog folder reset group_id 0 last_compile 1 ood 0 toggle - vlog_0InOptions {} vlog_1995compat 0 vlog_disableopt 0 vlog_enable0In 0 vlog_hazard 0 vlog_nodebug 0 vlog_noload 0 vlog_options {} vlog_protect 0 vlog_showsource 0 vlog_upper 0 voptflow 1

Project_File_3 = $ROOT/cpu/control/sequencer.v

Project_File_P_3 = compile_order 7 compile_to work cover_branch 0 cover_cond 0 cover_covercells 0 cover_excludedefault 0 cover_expr 0 cover_exttoggle 0 cover_fsm 0 cover_nofec 0 cover_noshort 0 cover_optlevel 3 cover_stmt 0 cover_toggle 0 dont_compile 0 file_type verilog folder sequencer group_id 0 last_compile 1 ood 0 toggle - vlog_0InOptions {} vlog_1995compat 0 vlog_disableopt 0 vlog_enable0In 0 vlog_hazard 0 vlog_nodebug 0 vlog_noload 0 vlog_options {} vlog_protect 0 vlog_showsource 0 vlog_upper 0 voptflow 1

Project_File_4 = $ROOT/cpu/control/test_interrupts.sv

Project_File_P_4 = compile_order 2 compile_to work cover_branch 0 cover_cond 0 cover_covercells 0 cover_excludedefault 0 cover_expr 0 cover_exttoggle 0 cover_fsm 0 cover_nofec 0 cover_noshort 0 cover_optlevel 3 cover_stmt 0 cover_toggle 0 dont_compile 0 file_type systemverilog folder interrupts group_id 0 last_compile 1 ood 0 toggle - vlog_0InOptions {} vlog_1995compat SV vlog_disableopt 0 vlog_enable0In 0 vlog_hazard 0 vlog_nodebug 0 vlog_noload 0 vlog_options {} vlog_protect 0 vlog_showsource 0 vlog_upper 0 voptflow 1

Project_File_5 = $ROOT/cpu/control/test_pin_control.sv

Project_File_P_5 = compile_order 0 compile_to work cover_branch 0 cover_cond 0 cover_covercells 0 cover_excludedefault 0 cover_expr 0 cover_exttoggle 0 cover_fsm 0 cover_nofec 0 cover_noshort 0 cover_optlevel 3 cover_stmt 0 cover_toggle 0 dont_compile 0 file_type systemverilog folder {pin control} group_id 0 last_compile 1 ood 0 toggle - vlog_0InOptions {} vlog_1995compat SV vlog_disableopt 0 vlog_enable0In 0 vlog_hazard 0 vlog_nodebug 0 vlog_noload 0 vlog_options {} vlog_protect 0 vlog_showsource 0 vlog_upper 0 voptflow 1

Project_File_6 = $ROOT/cpu/control/test_reset.sv

Project_File_P_6 = compile_order 3 compile_to work cover_branch 0 cover_cond 0 cover_covercells 0 cover_excludedefault 0 cover_expr 0 cover_exttoggle 0 cover_fsm 0 cover_nofec 0 cover_noshort 0 cover_optlevel 3 cover_stmt 0 cover_toggle 0 dont_compile 0 file_type systemverilog folder reset group_id 0 last_compile 1 ood 0 toggle - vlog_0InOptions {} vlog_1995compat SV vlog_disableopt 0 vlog_enable0In 0 vlog_hazard 0 vlog_nodebug 0 vlog_noload 0 vlog_options {} vlog_protect 0 vlog_showsource 0 vlog_upper 0 voptflow 1

Project_File_7 = $ROOT/cpu/control/test_sequencer.sv

Project_File_P_7 = compile_order 5 compile_to work cover_branch 0 cover_cond 0 cover_covercells 0 cover_excludedefault 0 cover_expr 0 cover_exttoggle 0 cover_fsm 0 cover_nofec 0 cover_noshort 0 cover_optlevel 3 cover_stmt 0 cover_toggle 0 dont_compile 0 file_type systemverilog folder sequencer group_id 0 last_compile 1 ood 0 toggle - vlog_0InOptions {} vlog_1995compat SV vlog_disableopt 0 vlog_enable0In 0 vlog_hazard 0 vlog_nodebug 0 vlog_noload 0 vlog_options {} vlog_protect 0 vlog_showsource 0 vlog_upper 0 voptflow 1

Project_Sim_Count = 4

Project_Sim_0 = Test pin control

Project_Sim_P_0 = timing default -sdfnoerror 0 -t default -nofileshare 0 +no_pulse_msg 0 -Lf {} Generics {} +notimingchecks 0 ok 1 folder {pin control} +pulse_e {} additional_dus work.test_pin_control -assertfile {} -std_output {} -L {} -nopsl 0 -nosva 0 +pulse_r {} -absentisempty 0 -assertcover 0 -multisource_delay {} OtherArgs {} -vital2.2b 0 is_vopt_flow 0 -memprof 0 -noglitch 0 -0in_options {} selected_du {} -sdf {} -hazards 0 -0in 0 vopt_env 1 -coverage 0 +plusarg {} -assertdebug 0 -wlf {} -sdfnowarn 0 -std_input {}

Project_Sim_1 = Test interrupts

Project_Sim_P_1 = timing default -sdfnoerror 0 -t default -nofileshare 0 +no_pulse_msg 0 -Lf {} Generics {} +notimingchecks 0 ok 1 folder interrupts +pulse_e {} additional_dus work.test_interrupts -assertfile {} -std_output {} -L {} -nopsl 0 -nosva 0 +pulse_r {} -absentisempty 0 -assertcover 0 -multisource_delay {} OtherArgs {} -vital2.2b 0 is_vopt_flow 0 -memprof 0 -noglitch 0 -0in_options {} selected_du {} -sdf {} -hazards 0 -0in 0 vopt_env 1 -coverage 0 +plusarg {} -assertdebug 0 -wlf {} -sdfnowarn 0 -std_input {}

Project_Sim_2 = Test reset

Project_Sim_P_2 = timing default -sdfnoerror 0 -t default -nofileshare 0 +no_pulse_msg 0 -Lf {} Generics {} +notimingchecks 0 ok 1 folder reset +pulse_e {} additional_dus work.test_reset -assertfile {} -std_output {} -L {} -nopsl 0 -nosva 0 +pulse_r {} -absentisempty 0 -assertcover 0 -multisource_delay {} OtherArgs {} -vital2.2b 0 is_vopt_flow 0 -memprof 0 -noglitch 0 -0in_options {} selected_du {} -sdf {} -hazards 0 -0in 0 vopt_env 1 -coverage 0 +plusarg {} -assertdebug 0 -wlf {} -sdfnowarn 0 -std_input {}

Project_Sim_3 = Test sequencer

Project_Sim_P_3 = timing default -t default -sdfnoerror 0 -nofileshare 0 +no_pulse_msg 0 -Lf {} Generics {} +notimingchecks 0 ok 1 folder sequencer +pulse_e {} additional_dus work.test_sequencer -assertfile {} -std_output {} -L {} -nopsl 0 -nosva 0 +pulse_r {} -absentisempty 0 -assertcover 0 -multisource_delay {} OtherArgs {} -vital2.2b 0 is_vopt_flow 0 -memprof 0 -noglitch 0 -0in_options {} selected_du {} -sdf {} -hazards 0 -0in 0 vopt_env 1 -coverage 0 +plusarg {} -assertdebug 0 -wlf {} -sdfnowarn 0 -std_input {}

Project_Folder_Count = 4

Project_Folder_0 = interrupts

Project_Folder_P_0 = folder {Top Level}

Project_Folder_1 = pin control

Project_Folder_P_1 = folder {Top Level}

Project_Folder_2 = reset

Project_Folder_P_2 = folder {Top Level}

Project_Folder_3 = sequencer

Project_Folder_P_3 = folder {Top Level}

Echo_Compile_Output = 0

Save_Compile_Report = 1

Project_Opt_Count = 0

ForceSoftPaths = 1

ProjectStatusDelay = 5000

VERILOG_DoubleClick = Edit

VERILOG_CustomDoubleClick =

SYSTEMVERILOG_DoubleClick = Edit

SYSTEMVERILOG_CustomDoubleClick =

VHDL_DoubleClick = Edit

VHDL_CustomDoubleClick =

PSL_DoubleClick = Edit

PSL_CustomDoubleClick =

TEXT_DoubleClick = Edit

TEXT_CustomDoubleClick =

SYSTEMC_DoubleClick = Edit

SYSTEMC_CustomDoubleClick =

TCL_DoubleClick = Edit

TCL_CustomDoubleClick =

MACRO_DoubleClick = Edit

MACRO_CustomDoubleClick =

VCD_DoubleClick = Edit

VCD_CustomDoubleClick =

SDF_DoubleClick = Edit

SDF_CustomDoubleClick =

XML_DoubleClick = Edit

XML_CustomDoubleClick =

LOGFILE_DoubleClick = Edit

LOGFILE_CustomDoubleClick =

UCDB_DoubleClick = Edit

UCDB_CustomDoubleClick =

UPF_DoubleClick = Edit

UPF_CustomDoubleClick =

PCF_DoubleClick = Edit

PCF_CustomDoubleClick =

PROJECT_DoubleClick = Edit

PROJECT_CustomDoubleClick =

VRM_DoubleClick = Edit

VRM_CustomDoubleClick =

DEBUGDATABASE_DoubleClick = Edit

DEBUGDATABASE_CustomDoubleClick =

DEBUGARCHIVE_DoubleClick = Edit

DEBUGARCHIVE_CustomDoubleClick =

Project_Major_Version = 10

Project_Minor_Version = 1