Subversion Repositories ac97

/////////////////////////////////////////////////////////////////////

////                                                             ////

////  WISHBONE AC 97 Codec                                       ////

////  Serial Output Block                                        ////

////                                                             ////

////                                                             ////

////  Author: Rudolf Usselmann                                   ////

////          rudi@asics.ws                                      ////

////                                                             ////

////                                                             ////

////  Downloaded from: http://www.opencores.org/cores/ac97_ctrl/ ////

////                                                             ////

/////////////////////////////////////////////////////////////////////

////                                                             ////

//// Copyright (C) 2000 Rudolf Usselmann                         ////

////                    rudi@asics.ws                            ////

////                                                             ////

//// This source file may be used and distributed without        ////

//// restriction provided that this copyright statement is not   ////

//// removed from the file and that any derivative work contains ////

//// the original copyright notice and the associated disclaimer.////

////                                                             ////

////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////

//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////

//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////

//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////

//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////

//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////

//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////

//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////

//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////

//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////

//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////

//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////

//// POSSIBILITY OF SUCH DAMAGE.                                 ////

////                                                             ////

/////////////////////////////////////////////////////////////////////

//  CVS Log

//

//  $Id: ac97_codec_sout.v,v 1.1 2002-02-13 08:22:32 rudi Exp $

//

//  $Date: 2002-02-13 08:22:32 $

//  $Revision: 1.1 $

//  $Author: rudi $

//  $Locker:  $

//  $State: Exp $

//

// Change History:

//               $Log: not supported by cvs2svn $

//

//

//

`include "ac97_defines.v"

module ac97_codec_sout(clk, rst,

        sync, slt0, slt1, slt2, slt3, slt4, slt5,

        slt6, slt7, slt8, slt9, slt10, slt11, slt12,

        sdata_out

        );

input           clk, rst;

// --------------------------------------

// Misc Signals

input           sync;

input   [15:0]   slt0;

input   [19:0]   slt1;

input   [19:0]   slt2;

input   [19:0]   slt3;

input   [19:0]   slt4;

input   [19:0]   slt5;

input   [19:0]   slt6;

input   [19:0]   slt7;

input   [19:0]   slt8;

input   [19:0]   slt9;

input   [19:0]   slt10;

input   [19:0]   slt11;

input   [19:0]   slt12;

// --------------------------------------

// AC97 Codec Interface

output          sdata_out;

////////////////////////////////////////////////////////////////////

//

// Local Wires

//

reg             sdata_out_r;

reg     [15:0]   slt0_r;

reg     [19:0]   slt1_r;

reg     [19:0]   slt2_r;

reg     [19:0]   slt3_r;

reg     [19:0]   slt4_r;

reg     [19:0]   slt5_r;

reg     [19:0]   slt6_r;

reg     [19:0]   slt7_r;

reg     [19:0]   slt8_r;

reg     [19:0]   slt9_r;

reg     [19:0]   slt10_r;

reg     [19:0]   slt11_r;

reg     [19:0]   slt12_r;

reg             sync_r;

wire            sync_e;

////////////////////////////////////////////////////////////////////

//

// Misc Logic

//

// Sync Edge detector

always @(posedge clk)

        sync_r <= #1 sync;

assign sync_e = sync & !sync_r;

////////////////////////////////////////////////////////////////////

//

// Serial Shift Register

//

/*

always @(negedge clk)

        sdata_out_r <= #1 slt0_r[15];

//assign        sdata_out = sdata_out_r;

*/

assign  sdata_out = slt0_r[15];

always @(posedge clk)

        if(sync_e)      slt0_r <= #1 slt0;

        else            slt0_r <= #1 {slt0_r[14:0], slt1_r[19]};

always @(posedge clk)

        if(sync_e)      slt1_r <= #1 slt1;

        else            slt1_r <= #1 {slt1_r[18:0], slt2_r[19]};

always @(posedge clk)

        if(sync_e)      slt2_r <= #1 slt2;

        else            slt2_r <= #1 {slt2_r[18:0], slt3_r[19]};

always @(posedge clk)

        if(sync_e)      slt3_r <= #1 slt3;

        else            slt3_r <= #1 {slt3_r[18:0], slt4_r[19]};

always @(posedge clk)

        if(sync_e)      slt4_r <= #1 slt4;

        else            slt4_r <= #1 {slt4_r[18:0], slt5_r[19]};

always @(posedge clk)

        if(sync_e)      slt5_r <= #1 slt5;

        else            slt5_r <= #1 {slt5_r[18:0], slt6_r[19]};

always @(posedge clk)

        if(sync_e)      slt6_r <= #1 slt6;

        else            slt6_r <= #1 {slt6_r[18:0], slt7_r[19]};

always @(posedge clk)

        if(sync_e)      slt7_r <= #1 slt7;

        else            slt7_r <= #1 {slt7_r[18:0], slt8_r[19]};

always @(posedge clk)

        if(sync_e)      slt8_r <= #1 slt8;

        else            slt8_r <= #1 {slt8_r[18:0], slt9_r[19]};

always @(posedge clk)

        if(sync_e)      slt9_r <= #1 slt9;

        else            slt9_r <= #1 {slt9_r[18:0], slt10_r[19]};

always @(posedge clk)

        if(sync_e)      slt10_r <= #1 slt10;

        else            slt10_r <= #1 {slt10_r[18:0], slt11_r[19]};

always @(posedge clk)

        if(sync_e)      slt11_r <= #1 slt11;

        else            slt11_r <= #1 {slt11_r[18:0], slt12_r[19]};

always @(posedge clk)

        if(sync_e)      slt12_r <= #1 slt12;

        else            slt12_r <= #1 {slt12_r[18:0], 1'b0 };

endmodule