1 |
14 |
nyawn |
/* chain_commands.c -- JTAG protocol bridge between GDB and Advanced debug module.
|
2 |
32 |
nyawn |
Copyright(C) 2008 - 2010 Nathan Yawn, nyawn@opencores.net
|
3 |
4 |
nyawn |
based on code from jp2 by Marko Mlinar, markom@opencores.org
|
4 |
|
|
|
5 |
14 |
nyawn |
This file contains functions which perform mid-level transactions
|
6 |
|
|
on a JTAG, such as setting a value in the TAP IR
|
7 |
|
|
or doing a burst write on the JTAG chain.
|
8 |
4 |
nyawn |
|
9 |
|
|
This program is free software; you can redistribute it and/or modify
|
10 |
|
|
it under the terms of the GNU General Public License as published by
|
11 |
|
|
the Free Software Foundation; either version 2 of the License, or
|
12 |
|
|
(at your option) any later version.
|
13 |
|
|
|
14 |
|
|
This program is distributed in the hope that it will be useful,
|
15 |
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
16 |
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
17 |
|
|
GNU General Public License for more details.
|
18 |
|
|
|
19 |
|
|
You should have received a copy of the GNU General Public License
|
20 |
|
|
along with this program; if not, write to the Free Software
|
21 |
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
22 |
|
|
*/
|
23 |
|
|
|
24 |
|
|
|
25 |
|
|
|
26 |
|
|
#include <stdio.h>
|
27 |
|
|
#include <stdlib.h> // for malloc()
|
28 |
|
|
#include <unistd.h> // for usleep()
|
29 |
14 |
nyawn |
//#include <pthread.h> // for mutexes
|
30 |
4 |
nyawn |
|
31 |
|
|
#include "chain_commands.h" // For the return error codes
|
32 |
|
|
#include "altera_virtual_jtag.h" // hardware-specifg defines for the Altera Virtual JTAG interface
|
33 |
|
|
#include "cable_common.h" // low-level JTAG IO routines
|
34 |
14 |
nyawn |
#include "adv_dbg_commands.h" // for the kludge in tap_reset()
|
35 |
4 |
nyawn |
#include "errcodes.h"
|
36 |
|
|
|
37 |
|
|
#define debug(...) //fprintf(stderr, __VA_ARGS__ )
|
38 |
|
|
|
39 |
|
|
// How many tries before an abort
|
40 |
|
|
#define NUM_SOFT_RETRIES 5
|
41 |
|
|
|
42 |
14 |
nyawn |
// for the klugde in tap_reset()
|
43 |
|
|
extern int current_reg_idx[DBG_MAX_MODULES];
|
44 |
4 |
nyawn |
|
45 |
|
|
/* Currently selected scan chain in the debug unit - just to prevent unnecessary
|
46 |
|
|
transfers. */
|
47 |
|
|
int current_chain = -1;
|
48 |
|
|
int desired_chain = -1;
|
49 |
|
|
|
50 |
14 |
nyawn |
// wait for 100ms
|
51 |
|
|
#define JTAG_RETRY_WAIT() usleep(100000);
|
52 |
4 |
nyawn |
|
53 |
|
|
// Retry data
|
54 |
|
|
int soft_retry_no = 0;
|
55 |
|
|
//static int hard_retry_no = 0;
|
56 |
|
|
|
57 |
|
|
// Configuration data
|
58 |
|
|
int global_IR_size = 0;
|
59 |
|
|
int global_IR_prefix_bits = 0;
|
60 |
|
|
int global_IR_postfix_bits = 0;
|
61 |
|
|
int global_DR_prefix_bits = 0;
|
62 |
|
|
int global_DR_postfix_bits = 0;
|
63 |
|
|
unsigned int global_jtag_cmd_debug = 0; // Value to be shifted into the TAP IR to select the debug unit (unused for virtual jtag)
|
64 |
|
|
unsigned char global_altera_virtual_jtag = 0; // Set true to use virtual jtag mode
|
65 |
|
|
unsigned int vjtag_cmd_vir = ALTERA_CYCLONE_CMD_VIR; // virtual IR-shift command for altera devices, may be configured on command line
|
66 |
|
|
unsigned int vjtag_cmd_vdr = ALTERA_CYCLONE_CMD_VDR; // virtual DR-shift, ditto
|
67 |
|
|
unsigned char global_xilinx_bscan = 0; // Set true if the hardware uses a Xilinx BSCAN_* device.
|
68 |
|
|
|
69 |
|
|
|
70 |
|
|
///////////////////////////////////////////////////////////////////////
|
71 |
|
|
// Configuration
|
72 |
|
|
|
73 |
|
|
void config_set_IR_size(int size) {
|
74 |
|
|
global_IR_size = size;
|
75 |
|
|
}
|
76 |
|
|
|
77 |
|
|
void config_set_IR_prefix_bits(int bits) {
|
78 |
|
|
global_IR_prefix_bits = bits;
|
79 |
|
|
}
|
80 |
|
|
|
81 |
|
|
void config_set_IR_postfix_bits(int bits) {
|
82 |
|
|
global_IR_postfix_bits = bits;
|
83 |
|
|
}
|
84 |
|
|
|
85 |
|
|
void config_set_DR_prefix_bits(int bits) {
|
86 |
|
|
global_DR_prefix_bits = bits;
|
87 |
|
|
}
|
88 |
|
|
|
89 |
|
|
void config_set_DR_postfix_bits(int bits) {
|
90 |
|
|
global_DR_postfix_bits = bits;
|
91 |
|
|
}
|
92 |
|
|
|
93 |
|
|
void config_set_debug_cmd(unsigned int cmd) {
|
94 |
|
|
global_jtag_cmd_debug = cmd;
|
95 |
|
|
}
|
96 |
|
|
|
97 |
|
|
void config_set_alt_vjtag(unsigned char enable) {
|
98 |
|
|
global_altera_virtual_jtag = (enable) ? 1:0;
|
99 |
|
|
}
|
100 |
|
|
|
101 |
|
|
// At present, all devices which support virtual JTAG use the same VIR/VDR
|
102 |
|
|
// commands. But, if they ever change, these can be changed on the command line.
|
103 |
|
|
void config_set_vjtag_cmd_vir(unsigned int cmd) {
|
104 |
|
|
vjtag_cmd_vir = cmd;
|
105 |
|
|
}
|
106 |
|
|
|
107 |
|
|
void config_set_vjtag_cmd_vdr(unsigned int cmd) {
|
108 |
|
|
vjtag_cmd_vdr = cmd;
|
109 |
|
|
}
|
110 |
|
|
|
111 |
|
|
void config_set_xilinx_bscan(unsigned char enable) {
|
112 |
|
|
global_xilinx_bscan = (enable) ? 1:0;
|
113 |
|
|
}
|
114 |
|
|
|
115 |
|
|
//////////////////////////////////////////////////////////////////////
|
116 |
|
|
// Functions which operate on the JTAG TAP
|
117 |
|
|
|
118 |
|
|
|
119 |
|
|
/* Resets JTAG - Writes TRST=1, and TRST=0. Sends 8 TMS to put the TAP
|
120 |
|
|
* in test_logic_reset mode, for good measure.
|
121 |
|
|
*/
|
122 |
|
|
int tap_reset(void) {
|
123 |
|
|
int i;
|
124 |
|
|
int err = APP_ERR_NONE;
|
125 |
|
|
|
126 |
|
|
debug("\nreset(");
|
127 |
|
|
err |= jtag_write_bit(0);
|
128 |
|
|
JTAG_RETRY_WAIT();
|
129 |
|
|
/* In case we don't have TRST reset it manually */
|
130 |
|
|
for(i = 0; i < 8; i++) err |= jtag_write_bit(TMS);
|
131 |
14 |
nyawn |
err |= jtag_write_bit(TRST); // if TRST not supported, this puts us in test logic/reset
|
132 |
4 |
nyawn |
JTAG_RETRY_WAIT();
|
133 |
|
|
err |= jtag_write_bit(0); // run test / idle
|
134 |
|
|
debug(")\n");
|
135 |
|
|
|
136 |
|
|
// Reset data on current module/register selections
|
137 |
|
|
current_chain = -1;
|
138 |
14 |
nyawn |
|
139 |
|
|
// (this is only for the adv. debug i/f...bit of a kludge)
|
140 |
4 |
nyawn |
for(i = 0; i < DBG_MAX_MODULES; i++)
|
141 |
|
|
current_reg_idx[i] = -1;
|
142 |
|
|
|
143 |
|
|
return err;
|
144 |
|
|
}
|
145 |
|
|
|
146 |
|
|
// Set the IR with the DEBUG command, one way or the other
|
147 |
|
|
int tap_enable_debug_module(void)
|
148 |
|
|
{
|
149 |
|
|
uint32_t data;
|
150 |
|
|
int err = APP_ERR_NONE;
|
151 |
|
|
|
152 |
|
|
if(global_altera_virtual_jtag) {
|
153 |
|
|
/* Set for virtual IR shift */
|
154 |
|
|
err |= tap_set_ir(vjtag_cmd_vir); // This is the altera virtual IR scan command
|
155 |
|
|
err |= jtag_write_bit(TMS); /* SELECT_DR SCAN */
|
156 |
|
|
err |= jtag_write_bit(0); /* CAPTURE_DR */
|
157 |
|
|
err |= jtag_write_bit(0); /* SHIFT_DR */
|
158 |
|
|
|
159 |
|
|
/* Select debug scan chain in virtual IR */
|
160 |
|
|
data = (0x1<<ALT_VJTAG_IR_SIZE)|ALT_VJTAG_CMD_DEBUG;
|
161 |
|
|
err |= jtag_write_stream(&data, (ALT_VJTAG_IR_SIZE+1), 1); // EXIT1_DR
|
162 |
|
|
err |= jtag_write_bit(TMS); /* UPDATE_DR */
|
163 |
|
|
err |= jtag_write_bit(0); /* IDLE */
|
164 |
|
|
|
165 |
|
|
// This is a command to set an altera device to the "virtual DR shift" command
|
166 |
|
|
err |= tap_set_ir(vjtag_cmd_vdr);
|
167 |
|
|
}
|
168 |
|
|
else {
|
169 |
|
|
/* select debug scan chain and stay in it forever */
|
170 |
|
|
err |= tap_set_ir(global_jtag_cmd_debug);
|
171 |
|
|
}
|
172 |
|
|
|
173 |
|
|
return err;
|
174 |
|
|
}
|
175 |
|
|
|
176 |
|
|
/* Moves a value into the TAP instruction register (IR)
|
177 |
|
|
* Includes adjustment for scan chain IR length.
|
178 |
|
|
*/
|
179 |
|
|
uint32_t *ir_chain = NULL;
|
180 |
|
|
|
181 |
|
|
int tap_set_ir(int ir) {
|
182 |
|
|
int chain_size;
|
183 |
|
|
int chain_size_words;
|
184 |
|
|
int i;
|
185 |
|
|
int startoffset, startshift;
|
186 |
|
|
int err = APP_ERR_NONE;
|
187 |
|
|
|
188 |
|
|
// Adjust desired IR with prefix, postfix bits to set other devices in the chain to BYPASS
|
189 |
|
|
chain_size = global_IR_size + global_IR_prefix_bits + global_IR_postfix_bits;
|
190 |
|
|
chain_size_words = (chain_size/32)+1;
|
191 |
|
|
|
192 |
|
|
if(ir_chain == NULL) { // We have no way to know in advance how many bits there are in the combined IR register
|
193 |
|
|
ir_chain = (uint32_t *) malloc(chain_size_words * sizeof(uint32_t));
|
194 |
|
|
if(ir_chain == NULL)
|
195 |
|
|
return APP_ERR_MALLOC;
|
196 |
|
|
}
|
197 |
|
|
|
198 |
|
|
for(i = 0; i < chain_size_words; i++)
|
199 |
|
|
ir_chain[i] = 0xFFFFFFFF; // Set all other devices to BYPASS
|
200 |
|
|
|
201 |
|
|
// Copy the IR value into the output stream
|
202 |
|
|
startoffset = global_IR_postfix_bits/32;
|
203 |
|
|
startshift = (global_IR_postfix_bits - (startoffset*32));
|
204 |
|
|
ir_chain[startoffset] &= (ir << startshift);
|
205 |
|
|
ir_chain[startoffset] |= ~(0xFFFFFFFF << startshift); // Put the 1's back in the LSB positions
|
206 |
|
|
ir_chain[startoffset] |= (0xFFFFFFFF << (startshift + global_IR_size)); // Put 1's back in MSB positions, if any
|
207 |
|
|
if((startshift + global_IR_size) > 32) { // Deal with spill into the next word
|
208 |
|
|
ir_chain[startoffset+1] &= ir >> (32-startshift);
|
209 |
|
|
ir_chain[startoffset+1] |= (0xFFFFFFFF << (global_IR_size - (32-startshift))); // Put the 1's back in the MSB positions
|
210 |
|
|
}
|
211 |
|
|
|
212 |
|
|
// Do the actual JTAG transaction
|
213 |
|
|
debug("Set IR 0x%X\n", ir);
|
214 |
|
|
err |= jtag_write_bit(TMS); /* SELECT_DR SCAN */
|
215 |
|
|
err |= jtag_write_bit(TMS); /* SELECT_IR SCAN */
|
216 |
|
|
|
217 |
|
|
err |= jtag_write_bit(0); /* CAPTURE_IR */
|
218 |
|
|
err |= jtag_write_bit(0); /* SHIFT_IR */
|
219 |
|
|
|
220 |
|
|
/* write data, EXIT1_IR */
|
221 |
|
|
debug("Setting IR, size %i, IR_size = %i, pre_size = %i, post_size = %i, data 0x%X\n", chain_size, global_IR_size, global_IR_prefix_bits, global_IR_postfix_bits, ir);
|
222 |
|
|
err |= cable_write_stream(ir_chain, chain_size, 1); // Use cable_ call directly (not jtag_), so we don't add DR prefix bits
|
223 |
|
|
debug("Done setting IR\n");
|
224 |
|
|
|
225 |
|
|
err |= jtag_write_bit(TMS); /* UPDATE_IR */
|
226 |
|
|
err |= jtag_write_bit(0); /* IDLE */
|
227 |
|
|
current_chain = -1;
|
228 |
|
|
return err;
|
229 |
|
|
}
|
230 |
|
|
|
231 |
|
|
|
232 |
|
|
// This assumes we are in the IDLE state, and we want to be in the SHIFT_DR state.
|
233 |
|
|
int tap_set_shift_dr(void)
|
234 |
|
|
{
|
235 |
|
|
int err = APP_ERR_NONE;
|
236 |
|
|
|
237 |
|
|
err |= jtag_write_bit(TMS); /* SELECT_DR SCAN */
|
238 |
|
|
err |= jtag_write_bit(0); /* CAPTURE_DR */
|
239 |
|
|
err |= jtag_write_bit(0); /* SHIFT_DR */
|
240 |
14 |
nyawn |
|
241 |
4 |
nyawn |
return err;
|
242 |
|
|
}
|
243 |
|
|
|
244 |
14 |
nyawn |
// This transitions from EXIT1 to IDLE. It should be the last thing called
|
245 |
|
|
// in any debug unit transaction.
|
246 |
|
|
int tap_exit_to_idle(void)
|
247 |
|
|
{
|
248 |
|
|
int err = APP_ERR_NONE;
|
249 |
4 |
nyawn |
|
250 |
14 |
nyawn |
err |= jtag_write_bit(TMS); /* UPDATE_DR */
|
251 |
|
|
err |= jtag_write_bit(0); /* IDLE */
|
252 |
|
|
|
253 |
|
|
return err;
|
254 |
|
|
}
|
255 |
|
|
|
256 |
4 |
nyawn |
////////////////////////////////////////////////////////////////////
|
257 |
|
|
// Operations to read / write data over JTAG
|
258 |
|
|
|
259 |
|
|
|
260 |
|
|
/* Writes TCLK=0, TRST=1, TMS=bit1, TDI=bit0
|
261 |
|
|
and TCLK=1, TRST=1, TMS=bit1, TDI=bit0
|
262 |
|
|
*/
|
263 |
|
|
int jtag_write_bit(uint8_t packet) {
|
264 |
|
|
debug("Wbit(%i)\n", packet);
|
265 |
|
|
return cable_write_bit(packet);
|
266 |
|
|
}
|
267 |
|
|
|
268 |
|
|
int jtag_read_write_bit(uint8_t packet, uint8_t *in_bit) {
|
269 |
|
|
int retval = cable_read_write_bit(packet, in_bit);
|
270 |
|
|
debug("RWbit(%i,%i)", packet, *in_bit);
|
271 |
|
|
return retval;
|
272 |
|
|
}
|
273 |
|
|
|
274 |
|
|
// This automatically adjusts for the DR length (other devices on scan chain)
|
275 |
|
|
// when the set_TMS flag is true.
|
276 |
|
|
int jtag_write_stream(uint32_t *out_data, int length_bits, unsigned char set_TMS)
|
277 |
|
|
{
|
278 |
|
|
int i;
|
279 |
|
|
int err = APP_ERR_NONE;
|
280 |
|
|
|
281 |
|
|
if(!set_TMS)
|
282 |
|
|
err |= cable_write_stream(out_data, length_bits, 0);
|
283 |
|
|
else if(global_DR_prefix_bits == 0)
|
284 |
|
|
err |= cable_write_stream(out_data, length_bits, 1);
|
285 |
|
|
else {
|
286 |
|
|
err |= cable_write_stream(out_data, length_bits, 0);
|
287 |
|
|
// It could be faster to do a cable_write_stream for all the prefix bits (if >= 8 bits),
|
288 |
|
|
// but we'd need a data array of unknown (and theoretically unlimited)
|
289 |
14 |
nyawn |
// size to hold the 0 bits to write. TODO: alloc/realloc one.
|
290 |
4 |
nyawn |
for(i = 0; i < (global_DR_prefix_bits-1); i++)
|
291 |
|
|
err |= jtag_write_bit(0);
|
292 |
|
|
err |= jtag_write_bit(TMS);
|
293 |
|
|
}
|
294 |
|
|
return err;
|
295 |
|
|
}
|
296 |
|
|
|
297 |
|
|
// When set_TMS is true, this function insures the written data is in the desired position (past prefix bits)
|
298 |
|
|
// before sending TMS. When 'adjust' is true, this function insures that the data read in accounts for postfix
|
299 |
|
|
// bits (they are shifted through before the read starts).
|
300 |
|
|
int jtag_read_write_stream(uint32_t *out_data, uint32_t *in_data, int length_bits, unsigned char adjust, unsigned char set_TMS)
|
301 |
|
|
{
|
302 |
|
|
int i;
|
303 |
|
|
int err = APP_ERR_NONE;
|
304 |
|
|
|
305 |
|
|
if(adjust && (global_DR_postfix_bits > 0)) {
|
306 |
|
|
// It would be faster to do a cable_write_stream for all the postfix bits,
|
307 |
|
|
// but we'd need a data array of unknown (and theoretically unlimited)
|
308 |
|
|
// size to hold the '0' bits to write.
|
309 |
|
|
for(i = 0; i < global_DR_postfix_bits; i++)
|
310 |
|
|
err |= cable_write_bit(0);
|
311 |
|
|
}
|
312 |
|
|
|
313 |
|
|
// If there are both prefix and postfix bits, we may shift more bits than strictly necessary.
|
314 |
|
|
// If we shifted out the data while burning through the postfix bits, these shifts could be subtracted
|
315 |
|
|
// from the number of prefix shifts. However, that way leads to madness.
|
316 |
|
|
if(!set_TMS)
|
317 |
|
|
err |= cable_read_write_stream(out_data, in_data, length_bits, 0);
|
318 |
|
|
else if(global_DR_prefix_bits == 0)
|
319 |
|
|
err |= cable_read_write_stream(out_data, in_data, length_bits, 1);
|
320 |
|
|
else {
|
321 |
|
|
err |= cable_read_write_stream(out_data, in_data, length_bits, 0);
|
322 |
|
|
// It would be faster to do a cable_write_stream for all the prefix bits,
|
323 |
|
|
// but we'd need a data array of unknown (and theoretically unlimited)
|
324 |
|
|
// size to hold the '0' bits to write.
|
325 |
|
|
for(i = 0; i < (global_DR_prefix_bits-1); i++)
|
326 |
|
|
err |= jtag_write_bit(0);
|
327 |
|
|
err |= jtag_write_bit(TMS);
|
328 |
|
|
}
|
329 |
|
|
return err;
|
330 |
|
|
}
|
331 |
|
|
|
332 |
|
|
|
333 |
|
|
|
334 |
|
|
// This function attempts to determine the structure of the JTAG chain
|
335 |
|
|
// It can determine how many devices are present.
|
336 |
|
|
// If the devices support the IDCODE command, it will be read and stored.
|
337 |
|
|
// There is no way to automatically determine the length of the IR registers -
|
338 |
|
|
// this must be read from a BSDL file, if IDCODE is supported.
|
339 |
|
|
// When IDCODE is not supported, IR length of the target device must be entered on the command line.
|
340 |
|
|
|
341 |
|
|
#define ALLOC_SIZE 64
|
342 |
|
|
#define MAX_DEVICES 1024
|
343 |
|
|
int jtag_enumerate_chain(uint32_t **id_array, int *num_devices)
|
344 |
|
|
{
|
345 |
|
|
uint32_t invalid_code = 0x7f; // Shift this out, we know we're done when we get it back
|
346 |
|
|
const unsigned int done_code = 0x3f; // invalid_code is altered, we keep this for comparison (minus the start bit)
|
347 |
|
|
int devindex = 0; // which device we are currently trying to detect
|
348 |
14 |
nyawn |
uint32_t tempID;
|
349 |
4 |
nyawn |
uint32_t temp_manuf_code;
|
350 |
|
|
uint32_t temp_rest_code;
|
351 |
|
|
uint8_t start_bit = 0;
|
352 |
14 |
nyawn |
uint32_t *idcodes;
|
353 |
4 |
nyawn |
int reallocs = 0;
|
354 |
|
|
int err = APP_ERR_NONE;
|
355 |
|
|
|
356 |
|
|
// Malloc a reasonable number of entries, we'll expand if we must. Linked lists are overrated.
|
357 |
14 |
nyawn |
idcodes = (uint32_t *) malloc(ALLOC_SIZE*sizeof(uint32_t));
|
358 |
4 |
nyawn |
if(idcodes == NULL) {
|
359 |
|
|
printf("Failed to allocate memory for device ID codes!\n");
|
360 |
|
|
return APP_ERR_MALLOC;
|
361 |
|
|
}
|
362 |
|
|
|
363 |
|
|
// Put in SHIFT-DR mode
|
364 |
|
|
err |= jtag_write_bit(TMS); /* SELECT_DR SCAN */
|
365 |
|
|
err |= jtag_write_bit(0); /* CAPTURE_DR */
|
366 |
|
|
err |= jtag_write_bit(0); /* SHIFT_DR */
|
367 |
|
|
|
368 |
|
|
printf("Enumerating JTAG chain...\n");
|
369 |
|
|
|
370 |
|
|
// Putting a limit on the # of devices supported has the useful side effect
|
371 |
|
|
// of insuring we still exit in error cases (we never get the 0x7f manuf. id)
|
372 |
|
|
while(devindex < MAX_DEVICES) {
|
373 |
|
|
// get 1 bit. 0 = BYPASS, 1 = start of IDCODE
|
374 |
|
|
err |= jtag_read_write_bit(invalid_code&0x01, &start_bit);
|
375 |
|
|
invalid_code >>= 1;
|
376 |
|
|
|
377 |
|
|
if(start_bit == 0) {
|
378 |
|
|
if(devindex >= (ALLOC_SIZE << reallocs)) { // Enlarge the memory array if necessary, double the size each time
|
379 |
14 |
nyawn |
idcodes = (uint32_t *) realloc(idcodes, (ALLOC_SIZE << ++reallocs)*sizeof(uint32_t));
|
380 |
4 |
nyawn |
if(idcodes == NULL) {
|
381 |
|
|
printf("Failed to allocate memory for device ID codes during enumeration!\n");
|
382 |
|
|
return APP_ERR_MALLOC;
|
383 |
|
|
}
|
384 |
|
|
}
|
385 |
|
|
idcodes[devindex] = -1;
|
386 |
|
|
devindex++;
|
387 |
|
|
}
|
388 |
|
|
else {
|
389 |
|
|
// get 11 bit manufacturer code
|
390 |
|
|
err |= jtag_read_write_stream(&invalid_code, &temp_manuf_code, 11, 0, 0);
|
391 |
|
|
invalid_code >>= 11;
|
392 |
|
|
|
393 |
|
|
if(temp_manuf_code != done_code) {
|
394 |
|
|
// get 20 more bits, rest of ID
|
395 |
|
|
err |= jtag_read_write_stream(&invalid_code, &temp_rest_code, 20, 0, 0);
|
396 |
|
|
invalid_code >>= 20;
|
397 |
|
|
tempID = (temp_rest_code << 12) | (temp_manuf_code << 1) | 0x01;
|
398 |
|
|
if(devindex >= (ALLOC_SIZE << reallocs)) { // Enlarge the memory array if necessary, double the size each time
|
399 |
14 |
nyawn |
idcodes = (uint32_t *) realloc(idcodes, (ALLOC_SIZE << ++reallocs)*sizeof(unsigned long));
|
400 |
4 |
nyawn |
if(idcodes == NULL) {
|
401 |
|
|
printf("Failed to allocate memory for device ID codes during enumeration!\n");
|
402 |
|
|
return APP_ERR_MALLOC;
|
403 |
|
|
}
|
404 |
|
|
}
|
405 |
|
|
idcodes[devindex] = tempID;
|
406 |
|
|
devindex++;
|
407 |
|
|
} else {
|
408 |
|
|
break;
|
409 |
|
|
}
|
410 |
|
|
}
|
411 |
|
|
|
412 |
|
|
if(err) // Don't try to keep probing if we get a comm. error
|
413 |
|
|
return err;
|
414 |
|
|
}
|
415 |
|
|
|
416 |
|
|
if(devindex >= MAX_DEVICES)
|
417 |
|
|
printf("WARNING: maximum supported devices on JTAG chain (%i) exceeded.\n", MAX_DEVICES);
|
418 |
|
|
|
419 |
|
|
// Put in IDLE mode
|
420 |
|
|
err |= jtag_write_bit(TMS); /* EXIT1_DR */
|
421 |
|
|
err |= jtag_write_bit(TMS); /* UPDATE_DR */
|
422 |
|
|
err |= jtag_write_bit(0); /* IDLE */
|
423 |
|
|
|
424 |
|
|
*id_array = idcodes;
|
425 |
32 |
nyawn |
*num_devices = devindex;
|
426 |
14 |
nyawn |
|
427 |
4 |
nyawn |
return err;
|
428 |
|
|
}
|
429 |
|
|
|
430 |
|
|
|
431 |
|
|
|
432 |
|
|
int jtag_get_idcode(uint32_t cmd, uint32_t *idcode)
|
433 |
|
|
{
|
434 |
|
|
uint32_t data_out = 0;
|
435 |
|
|
int err = APP_ERR_NONE;
|
436 |
|
|
unsigned char saveconfig = global_altera_virtual_jtag;
|
437 |
|
|
global_altera_virtual_jtag = 0; // We want the actual IDCODE, not the virtual device IDCODE
|
438 |
|
|
|
439 |
|
|
err |= tap_set_ir(cmd);
|
440 |
|
|
err |= tap_set_shift_dr();
|
441 |
|
|
err |= jtag_read_write_stream(&data_out, idcode, 32, 1, 1); /* EXIT1_DR */
|
442 |
|
|
|
443 |
|
|
if(err)
|
444 |
|
|
printf("Error getting ID code!\n");
|
445 |
|
|
|
446 |
|
|
// Put in IDLE mode
|
447 |
|
|
err |= jtag_write_bit(TMS); /* UPDATE_DR */
|
448 |
|
|
err |= jtag_write_bit(0); /* IDLE */
|
449 |
|
|
|
450 |
|
|
global_altera_virtual_jtag = saveconfig;
|
451 |
|
|
return err;
|
452 |
|
|
}
|
453 |
|
|
|
454 |
|
|
|
455 |
|
|
/////////////////////////////////////////////////////////////////
|
456 |
|
|
// Helper functions
|
457 |
|
|
|
458 |
|
|
/* counts retries and returns zero if we should abort */
|
459 |
14 |
nyawn |
/* TODO: dynamically adjust timings */
|
460 |
4 |
nyawn |
int retry_do() {
|
461 |
|
|
int err = APP_ERR_NONE;
|
462 |
|
|
|
463 |
|
|
if (soft_retry_no >= NUM_SOFT_RETRIES) {
|
464 |
|
|
return 0;
|
465 |
|
|
|
466 |
|
|
// *** TODO: Add a 'hard retry', which re-initializes the cable, re-enumerates the bus, etc.
|
467 |
|
|
|
468 |
|
|
} else { /* quick reset */
|
469 |
|
|
if(err |= tap_reset()) {
|
470 |
|
|
printf("Error %s while resetting for retry.\n", get_err_string(err));
|
471 |
|
|
return 0;
|
472 |
|
|
}
|
473 |
|
|
|
474 |
|
|
// Put us back into DEBUG mode
|
475 |
|
|
if(err |= tap_enable_debug_module()) {
|
476 |
|
|
printf("Error %s enabling debug module during retry.\n", get_err_string(err));
|
477 |
|
|
return 0;
|
478 |
|
|
}
|
479 |
|
|
|
480 |
|
|
soft_retry_no++;
|
481 |
|
|
printf("Retry...\n");
|
482 |
|
|
}
|
483 |
|
|
|
484 |
|
|
return 1;
|
485 |
|
|
}
|
486 |
|
|
|
487 |
|
|
/* resets retry counter */
|
488 |
|
|
void retry_ok() {
|
489 |
|
|
soft_retry_no = 0;
|
490 |
|
|
}
|
491 |
|
|
|