URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] [vlog/] [system/] [timer_module.v] - Blame information for rev 45

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////
//                                                              //
//  Timer Module                                                //
//                                                              //
//  This file is part of the Amber project                      //
//  http://www.opencores.org/project,amber                      //
//                                                              //
//  Description                                                 //
//  Contains 3 configurable timers. Each timer can generate     //
//  either one-shot or cyclical interrupts                      //
//                                                              //
//  Author(s):                                                  //
//      - Conor Santifort, csantifort.amber@gmail.com           //
//                                                              //
//////////////////////////////////////////////////////////////////
//                                                              //
// Copyright (C) 2010 Authors and OPENCORES.ORG                 //
//                                                              //
// This source file may be used and distributed without         //
// restriction provided that this copyright statement is not    //
// removed from the file and that any derivative work contains  //
// the original copyright notice and the associated disclaimer. //
//                                                              //
// This source file is free software; you can redistribute it   //
// and/or modify it under the terms of the GNU Lesser General   //
// Public License as published by the Free Software Foundation; //
// either version 2.1 of the License, or (at your option) any   //
// later version.                                               //
//                                                              //
// This source is distributed in the hope that it will be       //
// useful, but WITHOUT ANY WARRANTY; without even the implied   //
// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      //
// PURPOSE.  See the GNU Lesser General Public License for more //
// details.                                                     //
//                                                              //
// You should have received a copy of the GNU Lesser General    //
// Public License along with this source; if not, download it   //
// from http://www.opencores.org/lgpl.shtml                     //
//                                                              //
//////////////////////////////////////////////////////////////////
 
 
module timer_module  #(
parameter WB_DWIDTH  = 32,
parameter WB_SWIDTH  = 4
)(
input                       i_clk,
 
input       [31:0]          i_wb_adr,
input       [WB_SWIDTH-1:0] i_wb_sel,
input                       i_wb_we,
output      [WB_DWIDTH-1:0] o_wb_dat,
input       [WB_DWIDTH-1:0] i_wb_dat,
input                       i_wb_cyc,
input                       i_wb_stb,
output                      o_wb_ack,
output                      o_wb_err,
 
output      [2:0]           o_timer_int
 
);
 
 
`include "register_addresses.v"
 
// Wishbone registers
reg  [15:0]     timer0_load_reg = 'd0;   // initial count value
reg  [15:0]     timer1_load_reg = 'd0;   // initial count value
reg  [15:0]     timer2_load_reg = 'd0;   // initial count value
reg  [23:0]     timer0_value_reg = 24'hffffff;  // current count value
reg  [23:0]     timer1_value_reg = 24'hffffff;  // current count value
reg  [23:0]     timer2_value_reg = 24'hffffff;  // current count value
reg  [7:0]      timer0_ctrl_reg = 'd0;   // control bits
reg  [7:0]      timer1_ctrl_reg = 'd0;   // control bits
reg  [7:0]      timer2_ctrl_reg = 'd0;   // control bits
reg             timer0_int_reg = 'd0;    // interrupt flag
reg             timer1_int_reg = 'd0;    // interrupt flag 
reg             timer2_int_reg = 'd0;    // interrupt flag
 
// Wishbone interface
reg  [31:0]     wb_rdata32 = 'd0;
wire            wb_start_write;
wire            wb_start_read;
reg             wb_start_read_d1 = 'd0;
wire [31:0]     wb_wdata32;
 
 
// ======================================================
// Wishbone Interface
// ======================================================
 
// Can't start a write while a read is completing. The ack for the read cycle
// needs to be sent first
assign wb_start_write = i_wb_stb && i_wb_we && !wb_start_read_d1;
assign wb_start_read  = i_wb_stb && !i_wb_we && !o_wb_ack;
 
always @( posedge i_clk )
    wb_start_read_d1 <= wb_start_read;
 
 
assign o_wb_err = 1'd0;
assign o_wb_ack = i_wb_stb && ( wb_start_write || wb_start_read_d1 );
 
generate
if (WB_DWIDTH == 128)
    begin : wb128
    assign wb_wdata32   = i_wb_adr[3:2] == 2'd3 ? i_wb_dat[127:96] :
                          i_wb_adr[3:2] == 2'd2 ? i_wb_dat[ 95:64] :
                          i_wb_adr[3:2] == 2'd1 ? i_wb_dat[ 63:32] :
                                                  i_wb_dat[ 31: 0] ;
 
    assign o_wb_dat    = {4{wb_rdata32}};
    end
else
    begin : wb32
    assign wb_wdata32  = i_wb_dat;
    assign o_wb_dat    = wb_rdata32;
    end
endgenerate
 
// ========================================================
// Timer Interrupt Outputs
// ========================================================
assign o_timer_int = { timer2_int_reg,
                       timer1_int_reg,
                       timer0_int_reg };
 
 
// ========================================================
// Register Writes
// ========================================================
always @( posedge i_clk )
    begin
    if ( wb_start_write )
        case ( i_wb_adr[15:0] )
            // write to timer control registers
            AMBER_TM_TIMER0_CTRL: timer0_ctrl_reg <= i_wb_dat[7:0];
            AMBER_TM_TIMER1_CTRL: timer1_ctrl_reg <= i_wb_dat[7:0];
            AMBER_TM_TIMER2_CTRL: timer2_ctrl_reg <= i_wb_dat[7:0];
        endcase
 
    // -------------------------------  
    // Timer 0
    // -------------------------------  
    if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER0_LOAD )
        begin
        timer0_value_reg <= {i_wb_dat[15:0], 8'd0};
        timer0_load_reg  <= i_wb_dat[15:0];
        end
    else if ( timer0_ctrl_reg[7] ) // Timer Enabled
        begin
        if ( timer0_value_reg == 24'd0 )
            begin
            if ( timer0_ctrl_reg[6] )  // periodic
                timer0_value_reg <= {timer0_load_reg, 8'd0};
            else
                timer0_value_reg <= 24'hffffff;
            end
        else
            case ( timer0_ctrl_reg[3:2] )
                2'b00:  timer0_value_reg <= (timer0_value_reg & 24'hffff00) - 9'd256;
                2'b01:  timer0_value_reg <= (timer0_value_reg & 24'hfffff0) - 9'd16;
                2'b10:  timer0_value_reg <=  timer0_value_reg               - 1'd1;
                default:
                    begin
                    //synopsys translate_off
                    `TB_ERROR_MESSAGE
                    $write("unknown Timer Module Prescale Value %d for Timer 0",
                           timer0_ctrl_reg[3:2]);
                    //synopsys translate_on
                    end
            endcase
        end
 
 
    // -------------------------------  
    // Timer 1
    // -------------------------------  
    if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER1_LOAD )
        begin
        timer1_value_reg <= {i_wb_dat[15:0], 8'd0};
        timer1_load_reg  <= i_wb_dat[15:0];
        end
    else if ( timer1_ctrl_reg[7] ) // Timer Enabled
        begin
        if ( timer1_value_reg == 24'd0 )
            begin
            if ( timer1_ctrl_reg[6] )  // periodic
                timer1_value_reg <= {timer1_load_reg, 8'd0};
            else
                timer1_value_reg <= 24'hffffff;
            end
        else
            case ( timer1_ctrl_reg[3:2] )
                2'b00:  timer1_value_reg <= (timer1_value_reg & 24'hffff00) - 9'd256;
                2'b01:  timer1_value_reg <= (timer1_value_reg & 24'hfffff0) - 9'd16;
                2'b10:  timer1_value_reg <=  timer1_value_reg - 1'd1;
                default:
                    begin
                    //synopsys translate_off
                    `TB_ERROR_MESSAGE
                    $write("unknown Timer Module Prescale Value %d for Timer 1",
                           timer1_ctrl_reg[3:2]);
                    //synopsys translate_on
                    end
            endcase
        end
 
 
 
    // -------------------------------  
    // Timer 2
    // -------------------------------  
    if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER2_LOAD )
        begin
        timer2_value_reg <= {i_wb_dat[15:0], 8'd0};
        timer2_load_reg  <= i_wb_dat[15:0];
        end
    else if ( timer2_ctrl_reg[7] ) // Timer Enabled
        begin
        if ( timer2_value_reg == 24'd0 )
            begin
            if ( timer2_ctrl_reg[6] )  // periodic
                timer2_value_reg <= {timer2_load_reg, 8'd0};
            else
                timer2_value_reg <= 24'hffffff;
            end
        else
            case ( timer2_ctrl_reg[3:2] )
                2'b00:  timer2_value_reg <= (timer2_value_reg & 24'hffff00) - 9'd256;
                2'b01:  timer2_value_reg <= (timer2_value_reg & 24'hfffff0) - 9'd16;
                2'b10:  timer2_value_reg <=  timer2_value_reg - 1'd1;
                default:
                    begin
                    //synopsys translate_off
                    `TB_ERROR_MESSAGE
                    $write("unknown Timer Module Prescale Value %d for Timer 2",
                           timer2_ctrl_reg[3:2]);
                    //synopsys translate_on
                    end
            endcase
        end
 
 
    // -------------------------------  
    // Timer generated Interrupt Flags    
    // -------------------------------  
    if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER0_CLR )
        timer0_int_reg <= 1'd0;
    else if ( timer0_value_reg == 24'd0 )
        // stays asserted until cleared
        timer0_int_reg <= 1'd1;
 
    if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER1_CLR)
        timer1_int_reg <= 1'd0;
    else if ( timer1_value_reg == 24'd0 )
        // stays asserted until cleared
        timer1_int_reg <= 1'd1;
 
    if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER2_CLR)
        timer2_int_reg <= 1'd0;
    else if ( timer2_value_reg == 24'd0 )
        // stays asserted until cleared
        timer2_int_reg <= 1'd1;
 
    end
 
 
// ========================================================
// Register Reads
// ========================================================
always @( posedge i_clk )
    if ( wb_start_read )
        case ( i_wb_adr[15:0] )
            AMBER_TM_TIMER0_LOAD: wb_rdata32 <= {16'd0, timer0_load_reg};
            AMBER_TM_TIMER1_LOAD: wb_rdata32 <= {16'd0, timer1_load_reg};
            AMBER_TM_TIMER2_LOAD: wb_rdata32 <= {16'd0, timer2_load_reg};
            AMBER_TM_TIMER0_CTRL: wb_rdata32 <= {24'd0,
                                               timer0_ctrl_reg[7:6],
                                               2'd0,
                                               timer0_ctrl_reg[3:2],
                                               2'd0
                                              };
            AMBER_TM_TIMER1_CTRL: wb_rdata32 <= {24'd0,
                                               timer1_ctrl_reg[7:6],
                                               2'd0,
                                               timer1_ctrl_reg[3:2],
                                               2'd0
                                              };
            AMBER_TM_TIMER2_CTRL: wb_rdata32 <= {24'd0,
                                               timer2_ctrl_reg[7:6],
                                               2'd0,
                                               timer2_ctrl_reg[3:2],
                                               2'd0
                                              };
            AMBER_TM_TIMER0_VALUE: wb_rdata32 <= {16'd0, timer0_value_reg[23:8]};
            AMBER_TM_TIMER1_VALUE: wb_rdata32 <= {16'd0, timer1_value_reg[23:8]};
            AMBER_TM_TIMER2_VALUE: wb_rdata32 <= {16'd0, timer2_value_reg[23:8]};
 
            default:               wb_rdata32 <= 32'h66778899;
 
        endcase
 
 
 
// =======================================================================================
// =======================================================================================
// =======================================================================================
// Non-synthesizable debug code
// =======================================================================================
 
 
//synopsys translate_off
 
`ifdef AMBER_CT_DEBUG
 
reg  timer0_int_reg_d1;
reg  timer1_int_reg_d1;
reg  timer2_int_reg_d1;
wire wb_read_ack = i_wb_stb && !i_wb_we &&  o_wb_ack;
 
// -----------------------------------------------
// Report Timer Module Register accesses
// -----------------------------------------------  
always @(posedge i_clk)
    if ( wb_read_ack || wb_start_write )
        begin
        `TB_DEBUG_MESSAGE
 
        if ( wb_start_write )
            $write("Write 0x%08x to   ", i_wb_dat);
        else
            $write("Read  0x%08x from ", o_wb_dat);
 
        case ( i_wb_adr[15:0] )
            AMBER_TM_TIMER0_LOAD:
                $write(" Timer Module Timer 0 Load");
            AMBER_TM_TIMER1_LOAD:
                $write(" Timer Module Timer 1 Load");
            AMBER_TM_TIMER2_LOAD:
                $write(" Timer Module Timer 2 Load");
            AMBER_TM_TIMER0_CTRL:
                $write(" Timer Module Timer 0 Control");
            AMBER_TM_TIMER1_CTRL:
                $write(" Timer Module Timer 1 Control");
            AMBER_TM_TIMER2_CTRL:
                $write(" Timer Module Timer 2 Control");
            AMBER_TM_TIMER0_VALUE:
                $write(" Timer Module Timer 0 Value");
            AMBER_TM_TIMER1_VALUE:
                $write(" Timer Module Timer 1 Value");
            AMBER_TM_TIMER2_VALUE:
                $write(" Timer Module Timer 2 Value");
            AMBER_TM_TIMER0_CLR:
                $write(" Timer Module Timer 0 Clear");
            AMBER_TM_TIMER1_CLR:
                $write(" Timer Module Timer 1 Clear");
            AMBER_TM_TIMER2_CLR:
                $write(" Timer Module Timer 2 Clear");
 
            default:
                begin
                $write(" unknown Amber IC Register region");
                $write(", Address 0x%08h\n", i_wb_adr);
                `TB_ERROR_MESSAGE
                end
        endcase
 
        $write(", Address 0x%08h\n", i_wb_adr);
        end
 
always @(posedge i_clk)
    begin
    timer0_int_reg_d1 <= timer0_int_reg;
    timer1_int_reg_d1 <= timer1_int_reg;
    timer2_int_reg_d1 <= timer2_int_reg;
 
    if ( timer0_int_reg && !timer0_int_reg_d1 )
        begin
        `TB_DEBUG_MESSAGE
        $display("Timer Module Timer 0 Interrupt");
        end
    if ( timer1_int_reg && !timer1_int_reg_d1 )
        begin
        `TB_DEBUG_MESSAGE
        $display("Timer Module Timer 1 Interrupt");
        end
    if ( timer2_int_reg && !timer2_int_reg_d1 )
        begin
        `TB_DEBUG_MESSAGE
        $display("Timer Module Timer 2 Interrupt");
        end
    end
 
`endif
 
//synopsys translate_on
 
 
endmodule
 

Browse

Tools

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] [vlog/] [system/] [timer_module.v] - Blame information for rev 45

Line No.	Rev	Author	Line
1	2	csantifort	`//////////////////////////////////////////////////////////////////`
2			`// //`
3			`// Timer Module //`
4			`// //`
5			`// This file is part of the Amber project //`
6			`// http://www.opencores.org/project,amber //`
7			`// //`
8			`// Description //`
9			`// Contains 3 configurable timers. Each timer can generate //`
10			`// either one-shot or cyclical interrupts //`
11			`// //`
12			`// Author(s): //`
13			`// - Conor Santifort, csantifort.amber@gmail.com //`
14			`// //`
15			`//////////////////////////////////////////////////////////////////`
16			`// //`
17			`// Copyright (C) 2010 Authors and OPENCORES.ORG //`
18			`// //`
19			`// This source file may be used and distributed without //`
20			`// restriction provided that this copyright statement is not //`
21			`// removed from the file and that any derivative work contains //`
22			`// the original copyright notice and the associated disclaimer. //`
23			`// //`
24			`// This source file is free software; you can redistribute it //`
25			`// and/or modify it under the terms of the GNU Lesser General //`
26			`// Public License as published by the Free Software Foundation; //`
27			`// either version 2.1 of the License, or (at your option) any //`
28			`// later version. //`
29			`// //`
30			`// This source is distributed in the hope that it will be //`
31			`// useful, but WITHOUT ANY WARRANTY; without even the implied //`
32			`// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //`
33			`// PURPOSE. See the GNU Lesser General Public License for more //`
34			`// details. //`
35			`// //`
36			`// You should have received a copy of the GNU Lesser General //`
37			`// Public License along with this source; if not, download it //`
38			`// from http://www.opencores.org/lgpl.shtml //`
39			`// //`
40			`//////////////////////////////////////////////////////////////////`
41
42
43	35	csantifort	`module timer_module #(`
44			`parameter WB_DWIDTH = 32,`
45			`parameter WB_SWIDTH = 4`
46			`)(`
47	2	csantifort	`input i_clk,`
48
49			`input [31:0] i_wb_adr,`
50	35	csantifort	`input [WB_SWIDTH-1:0] i_wb_sel,`
51	2	csantifort	`input i_wb_we,`
52	35	csantifort	`output [WB_DWIDTH-1:0] o_wb_dat,`
53			`input [WB_DWIDTH-1:0] i_wb_dat,`
54	2	csantifort	`input i_wb_cyc,`
55			`input i_wb_stb,`
56			`output o_wb_ack,`
57			`output o_wb_err,`
58
59			`output [2:0] o_timer_int`
60
61			`);`
62
63
64			`include "register_addresses.v"
65
66			`// Wishbone registers`
67			`reg [15:0] timer0_load_reg = 'd0; // initial count value`
68			`reg [15:0] timer1_load_reg = 'd0; // initial count value`
69			`reg [15:0] timer2_load_reg = 'd0; // initial count value`
70			`reg [23:0] timer0_value_reg = 24'hffffff; // current count value`
71			`reg [23:0] timer1_value_reg = 24'hffffff; // current count value`
72			`reg [23:0] timer2_value_reg = 24'hffffff; // current count value`
73			`reg [7:0] timer0_ctrl_reg = 'd0; // control bits`
74			`reg [7:0] timer1_ctrl_reg = 'd0; // control bits`
75			`reg [7:0] timer2_ctrl_reg = 'd0; // control bits`
76			`reg timer0_int_reg = 'd0; // interrupt flag`
77			`reg timer1_int_reg = 'd0; // interrupt flag`
78			`reg timer2_int_reg = 'd0; // interrupt flag`
79
80			`// Wishbone interface`
81	35	csantifort	`reg [31:0] wb_rdata32 = 'd0;`
82	2	csantifort	`wire wb_start_write;`
83			`wire wb_start_read;`
84			`reg wb_start_read_d1 = 'd0;`
85	35	csantifort	`wire [31:0] wb_wdata32;`
86	2	csantifort
87
88			`// ======================================================`
89			`// Wishbone Interface`
90			`// ======================================================`
91
92			`// Can't start a write while a read is completing. The ack for the read cycle`
93			`// needs to be sent first`
94			`assign wb_start_write = i_wb_stb && i_wb_we && !wb_start_read_d1;`
95			`assign wb_start_read = i_wb_stb && !i_wb_we && !o_wb_ack;`
96
97			`always @( posedge i_clk )`
98			`wb_start_read_d1 <= wb_start_read;`
99
100
101			`assign o_wb_err = 1'd0;`
102			`assign o_wb_ack = i_wb_stb && ( wb_start_write \|\| wb_start_read_d1 );`
103
104	35	csantifort	`generate`
105			`if (WB_DWIDTH == 128)`
106			`begin : wb128`
107			`assign wb_wdata32 = i_wb_adr[3:2] == 2'd3 ? i_wb_dat[127:96] :`
108			`i_wb_adr[3:2] == 2'd2 ? i_wb_dat[ 95:64] :`
109			`i_wb_adr[3:2] == 2'd1 ? i_wb_dat[ 63:32] :`
110			`i_wb_dat[ 31: 0] ;`
111
112			`assign o_wb_dat = {4{wb_rdata32}};`
113			`end`
114			`else`
115			`begin : wb32`
116			`assign wb_wdata32 = i_wb_dat;`
117			`assign o_wb_dat = wb_rdata32;`
118			`end`
119			`endgenerate`
120	2	csantifort
121			`// ========================================================`
122			`// Timer Interrupt Outputs`
123			`// ========================================================`
124			`assign o_timer_int = { timer2_int_reg,`
125			`timer1_int_reg,`
126			`timer0_int_reg };`
127
128
129			`// ========================================================`
130			`// Register Writes`
131			`// ========================================================`
132			`always @( posedge i_clk )`
133			`begin`
134			`if ( wb_start_write )`
135			`case ( i_wb_adr[15:0] )`
136			`// write to timer control registers`
137			`AMBER_TM_TIMER0_CTRL: timer0_ctrl_reg <= i_wb_dat[7:0];`
138			`AMBER_TM_TIMER1_CTRL: timer1_ctrl_reg <= i_wb_dat[7:0];`
139			`AMBER_TM_TIMER2_CTRL: timer2_ctrl_reg <= i_wb_dat[7:0];`
140			`endcase`
141
142			`// -------------------------------`
143			`// Timer 0`
144			`// -------------------------------`
145			`if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER0_LOAD )`
146			`begin`
147			`timer0_value_reg <= {i_wb_dat[15:0], 8'd0};`
148			`timer0_load_reg <= i_wb_dat[15:0];`
149			`end`
150			`else if ( timer0_ctrl_reg[7] ) // Timer Enabled`
151			`begin`
152			`if ( timer0_value_reg == 24'd0 )`
153			`begin`
154			`if ( timer0_ctrl_reg[6] ) // periodic`
155			`timer0_value_reg <= {timer0_load_reg, 8'd0};`
156			`else`
157			`timer0_value_reg <= 24'hffffff;`
158			`end`
159			`else`
160			`case ( timer0_ctrl_reg[3:2] )`
161			`2'b00: timer0_value_reg <= (timer0_value_reg & 24'hffff00) - 9'd256;`
162			`2'b01: timer0_value_reg <= (timer0_value_reg & 24'hfffff0) - 9'd16;`
163			`2'b10: timer0_value_reg <= timer0_value_reg - 1'd1;`
164			`default:`
165			`begin`
166			`//synopsys translate_off`
167			`TB_ERROR_MESSAGE
168			`$write("unknown Timer Module Prescale Value %d for Timer 0",`
169			`timer0_ctrl_reg[3:2]);`
170			`//synopsys translate_on`
171			`end`
172			`endcase`
173			`end`
174
175
176			`// -------------------------------`
177			`// Timer 1`
178			`// -------------------------------`
179			`if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER1_LOAD )`
180			`begin`
181			`timer1_value_reg <= {i_wb_dat[15:0], 8'd0};`
182			`timer1_load_reg <= i_wb_dat[15:0];`
183			`end`
184			`else if ( timer1_ctrl_reg[7] ) // Timer Enabled`
185			`begin`
186			`if ( timer1_value_reg == 24'd0 )`
187			`begin`
188			`if ( timer1_ctrl_reg[6] ) // periodic`
189			`timer1_value_reg <= {timer1_load_reg, 8'd0};`
190			`else`
191			`timer1_value_reg <= 24'hffffff;`
192			`end`
193			`else`
194			`case ( timer1_ctrl_reg[3:2] )`
195			`2'b00: timer1_value_reg <= (timer1_value_reg & 24'hffff00) - 9'd256;`
196			`2'b01: timer1_value_reg <= (timer1_value_reg & 24'hfffff0) - 9'd16;`
197			`2'b10: timer1_value_reg <= timer1_value_reg - 1'd1;`
198			`default:`
199			`begin`
200			`//synopsys translate_off`
201			`TB_ERROR_MESSAGE
202			`$write("unknown Timer Module Prescale Value %d for Timer 1",`
203			`timer1_ctrl_reg[3:2]);`
204			`//synopsys translate_on`
205			`end`
206			`endcase`
207			`end`
208
209
210
211			`// -------------------------------`
212			`// Timer 2`
213			`// -------------------------------`
214			`if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER2_LOAD )`
215			`begin`
216			`timer2_value_reg <= {i_wb_dat[15:0], 8'd0};`
217			`timer2_load_reg <= i_wb_dat[15:0];`
218			`end`
219			`else if ( timer2_ctrl_reg[7] ) // Timer Enabled`
220			`begin`
221			`if ( timer2_value_reg == 24'd0 )`
222			`begin`
223			`if ( timer2_ctrl_reg[6] ) // periodic`
224			`timer2_value_reg <= {timer2_load_reg, 8'd0};`
225			`else`
226			`timer2_value_reg <= 24'hffffff;`
227			`end`
228			`else`
229			`case ( timer2_ctrl_reg[3:2] )`
230			`2'b00: timer2_value_reg <= (timer2_value_reg & 24'hffff00) - 9'd256;`
231			`2'b01: timer2_value_reg <= (timer2_value_reg & 24'hfffff0) - 9'd16;`
232			`2'b10: timer2_value_reg <= timer2_value_reg - 1'd1;`
233			`default:`
234			`begin`
235			`//synopsys translate_off`
236			`TB_ERROR_MESSAGE
237			`$write("unknown Timer Module Prescale Value %d for Timer 2",`
238			`timer2_ctrl_reg[3:2]);`
239			`//synopsys translate_on`
240			`end`
241			`endcase`
242			`end`
243
244
245			`// -------------------------------`
246			`// Timer generated Interrupt Flags`
247			`// -------------------------------`
248			`if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER0_CLR )`
249			`timer0_int_reg <= 1'd0;`
250			`else if ( timer0_value_reg == 24'd0 )`
251			`// stays asserted until cleared`
252			`timer0_int_reg <= 1'd1;`
253
254			`if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER1_CLR)`
255			`timer1_int_reg <= 1'd0;`
256			`else if ( timer1_value_reg == 24'd0 )`
257			`// stays asserted until cleared`
258			`timer1_int_reg <= 1'd1;`
259
260			`if ( wb_start_write && i_wb_adr[15:0] == AMBER_TM_TIMER2_CLR)`
261			`timer2_int_reg <= 1'd0;`
262			`else if ( timer2_value_reg == 24'd0 )`
263			`// stays asserted until cleared`
264			`timer2_int_reg <= 1'd1;`
265
266			`end`
267
268
269			`// ========================================================`
270			`// Register Reads`
271			`// ========================================================`
272			`always @( posedge i_clk )`
273			`if ( wb_start_read )`
274			`case ( i_wb_adr[15:0] )`
275	35	csantifort	`AMBER_TM_TIMER0_LOAD: wb_rdata32 <= {16'd0, timer0_load_reg};`
276			`AMBER_TM_TIMER1_LOAD: wb_rdata32 <= {16'd0, timer1_load_reg};`
277			`AMBER_TM_TIMER2_LOAD: wb_rdata32 <= {16'd0, timer2_load_reg};`
278			`AMBER_TM_TIMER0_CTRL: wb_rdata32 <= {24'd0,`
279	2	csantifort	`timer0_ctrl_reg[7:6],`
280			`2'd0,`
281			`timer0_ctrl_reg[3:2],`
282			`2'd0`
283			`};`
284	35	csantifort	`AMBER_TM_TIMER1_CTRL: wb_rdata32 <= {24'd0,`
285	2	csantifort	`timer1_ctrl_reg[7:6],`
286			`2'd0,`
287			`timer1_ctrl_reg[3:2],`
288			`2'd0`
289			`};`
290	35	csantifort	`AMBER_TM_TIMER2_CTRL: wb_rdata32 <= {24'd0,`
291	2	csantifort	`timer2_ctrl_reg[7:6],`
292			`2'd0,`
293			`timer2_ctrl_reg[3:2],`
294			`2'd0`
295			`};`
296	35	csantifort	`AMBER_TM_TIMER0_VALUE: wb_rdata32 <= {16'd0, timer0_value_reg[23:8]};`
297			`AMBER_TM_TIMER1_VALUE: wb_rdata32 <= {16'd0, timer1_value_reg[23:8]};`
298			`AMBER_TM_TIMER2_VALUE: wb_rdata32 <= {16'd0, timer2_value_reg[23:8]};`
299	2	csantifort
300	35	csantifort	`default: wb_rdata32 <= 32'h66778899;`
301	2	csantifort
302			`endcase`
303
304
305
306			`// =======================================================================================`
307			`// =======================================================================================`
308			`// =======================================================================================`
309			`// Non-synthesizable debug code`
310			`// =======================================================================================`
311
312
313			`//synopsys translate_off`
314
315			`ifdef AMBER_CT_DEBUG
316
317			`reg timer0_int_reg_d1;`
318			`reg timer1_int_reg_d1;`
319			`reg timer2_int_reg_d1;`
320			`wire wb_read_ack = i_wb_stb && !i_wb_we && o_wb_ack;`
321
322			`// -----------------------------------------------`
323			`// Report Timer Module Register accesses`
324			`// -----------------------------------------------`
325			`always @(posedge i_clk)`
326			`if ( wb_read_ack \|\| wb_start_write )`
327			`begin`
328			`TB_DEBUG_MESSAGE
329
330			`if ( wb_start_write )`
331			`$write("Write 0x%08x to ", i_wb_dat);`
332			`else`
333			`$write("Read 0x%08x from ", o_wb_dat);`
334
335			`case ( i_wb_adr[15:0] )`
336			`AMBER_TM_TIMER0_LOAD:`
337			`$write(" Timer Module Timer 0 Load");`
338			`AMBER_TM_TIMER1_LOAD:`
339			`$write(" Timer Module Timer 1 Load");`
340			`AMBER_TM_TIMER2_LOAD:`
341			`$write(" Timer Module Timer 2 Load");`
342			`AMBER_TM_TIMER0_CTRL:`
343			`$write(" Timer Module Timer 0 Control");`
344			`AMBER_TM_TIMER1_CTRL:`
345			`$write(" Timer Module Timer 1 Control");`
346			`AMBER_TM_TIMER2_CTRL:`
347			`$write(" Timer Module Timer 2 Control");`
348			`AMBER_TM_TIMER0_VALUE:`
349			`$write(" Timer Module Timer 0 Value");`
350			`AMBER_TM_TIMER1_VALUE:`
351			`$write(" Timer Module Timer 1 Value");`
352			`AMBER_TM_TIMER2_VALUE:`
353			`$write(" Timer Module Timer 2 Value");`
354			`AMBER_TM_TIMER0_CLR:`
355			`$write(" Timer Module Timer 0 Clear");`
356			`AMBER_TM_TIMER1_CLR:`
357			`$write(" Timer Module Timer 1 Clear");`
358			`AMBER_TM_TIMER2_CLR:`
359			`$write(" Timer Module Timer 2 Clear");`
360
361			`default:`
362			`begin`
363			`$write(" unknown Amber IC Register region");`
364			`$write(", Address 0x%08h\n", i_wb_adr);`
365			`TB_ERROR_MESSAGE
366			`end`
367			`endcase`
368
369			`$write(", Address 0x%08h\n", i_wb_adr);`
370			`end`
371
372			`always @(posedge i_clk)`
373			`begin`
374			`timer0_int_reg_d1 <= timer0_int_reg;`
375			`timer1_int_reg_d1 <= timer1_int_reg;`
376			`timer2_int_reg_d1 <= timer2_int_reg;`
377
378			`if ( timer0_int_reg && !timer0_int_reg_d1 )`
379			`begin`
380			`TB_DEBUG_MESSAGE
381			`$display("Timer Module Timer 0 Interrupt");`
382			`end`
383			`if ( timer1_int_reg && !timer1_int_reg_d1 )`
384			`begin`
385			`TB_DEBUG_MESSAGE
386			`$display("Timer Module Timer 1 Interrupt");`
387			`end`
388			`if ( timer2_int_reg && !timer2_int_reg_d1 )`
389			`begin`
390			`TB_DEBUG_MESSAGE
391			`$display("Timer Module Timer 2 Interrupt");`
392			`end`
393			`end`
394
395			`endif
396
397			`//synopsys translate_on`
398
399
400			`endmodule`
401