URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] [vlog/] [system/] [wb_ddr3_bridge.v] - Blame information for rev 47

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////
//                                                              //
//  Wishbone Slave to Xilinx MCB (DDR3 controller) Bridge       //
//                                                              //
//  This file is part of the Amber project                      //
//  http://www.opencores.org/project,amber                      //
//                                                              //
//  Description                                                 //
//  Converts wishbone read and write accesses to the signalling //
//  used by the Xilinx DDR3 Controller in Spartan-6 FPGAs.      //
//                                                              //
//  The MCB is confgiured with a single 128-bit port.           //
//                                                              //
//  Author(s):                                                  //
//      - Conor Santifort, csantifort.amber@gmail.com           //
//                                                              //
//////////////////////////////////////////////////////////////////
//                                                              //
// Copyright (C) 2010 Authors and OPENCORES.ORG                 //
//                                                              //
// This source file may be used and distributed without         //
// restriction provided that this copyright statement is not    //
// removed from the file and that any derivative work contains  //
// the original copyright notice and the associated disclaimer. //
//                                                              //
// This source file is free software; you can redistribute it   //
// and/or modify it under the terms of the GNU Lesser General   //
// Public License as published by the Free Software Foundation; //
// either version 2.1 of the License, or (at your option) any   //
// later version.                                               //
//                                                              //
// This source is distributed in the hope that it will be       //
// useful, but WITHOUT ANY WARRANTY; without even the implied   //
// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      //
// PURPOSE.  See the GNU Lesser General Public License for more //
// details.                                                     //
//                                                              //
// You should have received a copy of the GNU Lesser General    //
// Public License along with this source; if not, download it   //
// from http://www.opencores.org/lgpl.shtml                     //
//                                                              //
//////////////////////////////////////////////////////////////////
 
 
module wb_ddr3_bridge
(
input                          i_clk,
 
// MBus Ports
input       [31:0]             i_wb_adr,
input       [3:0]              i_wb_sel,
input                          i_wb_we,
output reg  [31:0]             o_wb_dat         = 'd0,
input       [31:0]             i_wb_dat,
input                          i_wb_cyc,
input                          i_wb_stb,
output                         o_wb_ack,
output                         o_wb_err,
 
output reg                     o_cmd_en         = 'd0,  // Command Enable
output reg [2:0]               o_cmd_instr      = 'd0,  // write = 000, read = 001
output reg [29:0]              o_cmd_byte_addr  = 'd0,  // Memory address
input                          i_cmd_full,              // DDR3 I/F Command FIFO is full
 
input                          i_wr_full,               // DDR3 I/F Write Data FIFO is full
output reg                     o_wr_en          = 'd0,  // Write data enable
output reg [15:0]              o_wr_mask        = 'd0,  // 1 bit per byte
output reg [127:0]             o_wr_data        = 'd0,  // 16 bytes write data
input      [127:0]             i_rd_data,               // 16 bytes of read data
input                          i_rd_empty               // low when read data is valid
 
);
 
wire            start_write;
wire            start_read;
reg             start_write_d1;
reg             start_read_d1;
reg             start_read_hold = 'd0;
reg  [31:0]     wb_adr_d1;
wire            ddr3_busy;
reg             read_ack = 'd0;
reg             read_ready = 1'd1;
 
assign start_write = i_wb_stb && i_wb_we && !start_read_d1;
assign start_read  = i_wb_stb && !i_wb_we && read_ready;
assign ddr3_busy   = i_cmd_full || i_wr_full;
 
assign o_wb_err = 'd0;
 
// ------------------------------------------------------
// Outputs
// ------------------------------------------------------
 
// Command FIFO
always @( posedge i_clk )
    begin
    o_cmd_byte_addr  <= {wb_adr_d1[29:4], 4'd0};
    o_cmd_en         <= !ddr3_busy && ( start_write_d1 || start_read_d1 );
    o_cmd_instr      <= start_write_d1 ? 3'd0 : 3'd1;
    end
 
 
// ------------------------------------------------------
// Write
// ------------------------------------------------------
always @( posedge i_clk )
    begin
    o_wr_en          <= start_write;
 
    `ifdef XILINX_VIRTEX6_FPGA
        o_wr_mask        <= i_wb_adr[2] == 2'd2 ? { 8'h0, 4'hf,  ~i_wb_sel        } :
                                                  { 8'h0,        ~i_wb_sel, 4'hf  } ;
    `else
        o_wr_mask        <= i_wb_adr[3:2] == 2'd0 ? { 12'hfff, ~i_wb_sel          } :
                            i_wb_adr[3:2] == 2'd1 ? { 8'hff,   ~i_wb_sel, 4'hf    } :
                            i_wb_adr[3:2] == 2'd2 ? { 4'hf,    ~i_wb_sel, 8'hff   } :
                                                    {          ~i_wb_sel, 12'hfff } ;
    `endif
 
    o_wr_data        <= {4{i_wb_dat}};
    end
 
 
// ------------------------------------------------------
// Read
// ------------------------------------------------------
 
always @( posedge i_clk )
    begin
    if ( read_ack )
        read_ready <= 1'd1;
    else if ( start_read )
        read_ready <= 1'd0;
 
    start_write_d1  <= start_write;
    start_read_d1   <= start_read;
    wb_adr_d1       <= i_wb_adr;
 
    if ( start_read  )
        start_read_hold <= 1'd1;
    else if ( read_ack )
        start_read_hold <= 1'd0;
 
    if ( i_rd_empty == 1'd0 && start_read_hold )
        begin
        `ifdef XILINX_VIRTEX6_FPGA
            o_wb_dat  <= i_wb_adr[2] == 2'd2   ? i_rd_data[  31:0] :
                                                 i_rd_data[ 63:32] ;
        `else
            o_wb_dat  <= i_wb_adr[3:2] == 2'd0 ? i_rd_data[ 31: 0] :
                         i_wb_adr[3:2] == 2'd1 ? i_rd_data[ 63:32] :
                         i_wb_adr[3:2] == 2'd2 ? i_rd_data[ 95:64] :
                                                 i_rd_data[127:96] ;
        `endif
        read_ack  <= 1'd1;
        end
    else
        read_ack  <= 1'd0;
    end
 
assign o_wb_ack = i_wb_stb && ( start_write || read_ack );
 
 
// Debug DDR3 - Wishbone Bridge  - not synthesizable
// ========================================================
//synopsys translate_off
 
`ifdef LP_MEMIF_DEBUG
    always @( posedge i_clk )
        begin
        if (start_write)
            $display("DDR3 Write Addr 0x%08x Data 0x%08h %08h %08h %08h, BE %d%d%d%d %d%d%d%d %d%d%d%d %d%d%d%d",
                     i_i_wb_adr, i_mwdata[127:96], i_mwdata[95:64], i_mwdata[63:32], i_mwdata[31:0],
                     i_mwben[15], i_mwben[14], i_mwben[13], i_mwben[12],
                     i_mwben[11], i_mwben[10], i_mwben[9],  i_mwben[8],
                     i_mwben[7],  i_mwben[6],  i_mwben[5],  i_mwben[4],
                     i_mwben[3],  i_mwben[2],  i_mwben[1],  i_mwben[0]
                     );
 
        if (i_rd_empty == 1'd0)
            $display("DDR3 Read  Addr 0x%08x Data 0x%08h %08h %08h %08h",
                     i_i_wb_adr, i_rd_data[127:96], i_rd_data [95:64], i_rd_data [63:32], i_rd_data [31:0]);
        end
`endif
//synopsys translate_on
 
 
endmodule
 

Line No.	Rev	Author	Line
1	2	csantifort	`//////////////////////////////////////////////////////////////////`
2			`// //`
3			`// Wishbone Slave to Xilinx MCB (DDR3 controller) Bridge //`
4			`// //`
5			`// This file is part of the Amber project //`
6			`// http://www.opencores.org/project,amber //`
7			`// //`
8			`// Description //`
9			`// Converts wishbone read and write accesses to the signalling //`
10			`// used by the Xilinx DDR3 Controller in Spartan-6 FPGAs. //`
11			`// //`
12			`// The MCB is confgiured with a single 128-bit port. //`
13			`// //`
14			`// Author(s): //`
15			`// - Conor Santifort, csantifort.amber@gmail.com //`
16			`// //`
17			`//////////////////////////////////////////////////////////////////`
18			`// //`
19			`// Copyright (C) 2010 Authors and OPENCORES.ORG //`
20			`// //`
21			`// This source file may be used and distributed without //`
22			`// restriction provided that this copyright statement is not //`
23			`// removed from the file and that any derivative work contains //`
24			`// the original copyright notice and the associated disclaimer. //`
25			`// //`
26			`// This source file is free software; you can redistribute it //`
27			`// and/or modify it under the terms of the GNU Lesser General //`
28			`// Public License as published by the Free Software Foundation; //`
29			`// either version 2.1 of the License, or (at your option) any //`
30			`// later version. //`
31			`// //`
32			`// This source is distributed in the hope that it will be //`
33			`// useful, but WITHOUT ANY WARRANTY; without even the implied //`
34			`// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //`
35			`// PURPOSE. See the GNU Lesser General Public License for more //`
36			`// details. //`
37			`// //`
38			`// You should have received a copy of the GNU Lesser General //`
39			`// Public License along with this source; if not, download it //`
40			`// from http://www.opencores.org/lgpl.shtml //`
41			`// //`
42			`//////////////////////////////////////////////////////////////////`
43
44
45			`module wb_ddr3_bridge`
46			`(`
47			`input i_clk,`
48
49			`// MBus Ports`
50			`input [31:0] i_wb_adr,`
51			`input [3:0] i_wb_sel,`
52			`input i_wb_we,`
53			`output reg [31:0] o_wb_dat = 'd0,`
54			`input [31:0] i_wb_dat,`
55			`input i_wb_cyc,`
56			`input i_wb_stb,`
57			`output o_wb_ack,`
58			`output o_wb_err,`
59
60			`output reg o_cmd_en = 'd0, // Command Enable`
61			`output reg [2:0] o_cmd_instr = 'd0, // write = 000, read = 001`
62			`output reg [29:0] o_cmd_byte_addr = 'd0, // Memory address`
63			`input i_cmd_full, // DDR3 I/F Command FIFO is full`
64
65			`input i_wr_full, // DDR3 I/F Write Data FIFO is full`
66			`output reg o_wr_en = 'd0, // Write data enable`
67			`output reg [15:0] o_wr_mask = 'd0, // 1 bit per byte`
68			`output reg [127:0] o_wr_data = 'd0, // 16 bytes write data`
69			`input [127:0] i_rd_data, // 16 bytes of read data`
70			`input i_rd_empty // low when read data is valid`
71
72			`);`
73
74			`wire start_write;`
75			`wire start_read;`
76			`reg start_write_d1;`
77			`reg start_read_d1;`
78			`reg start_read_hold = 'd0;`
79			`reg [31:0] wb_adr_d1;`
80			`wire ddr3_busy;`
81			`reg read_ack = 'd0;`
82			`reg read_ready = 1'd1;`
83
84			`assign start_write = i_wb_stb && i_wb_we && !start_read_d1;`
85			`assign start_read = i_wb_stb && !i_wb_we && read_ready;`
86			`assign ddr3_busy = i_cmd_full \|\| i_wr_full;`
87
88			`assign o_wb_err = 'd0;`
89
90			`// ------------------------------------------------------`
91			`// Outputs`
92			`// ------------------------------------------------------`
93
94			`// Command FIFO`
95			`always @( posedge i_clk )`
96			`begin`
97			`o_cmd_byte_addr <= {wb_adr_d1[29:4], 4'd0};`
98			`o_cmd_en <= !ddr3_busy && ( start_write_d1 \|\| start_read_d1 );`
99			`o_cmd_instr <= start_write_d1 ? 3'd0 : 3'd1;`
100			`end`
101
102
103			`// ------------------------------------------------------`
104			`// Write`
105			`// ------------------------------------------------------`
106			`always @( posedge i_clk )`
107			`begin`
108			`o_wr_en <= start_write;`
109
110			`ifdef XILINX_VIRTEX6_FPGA
111			`o_wr_mask <= i_wb_adr[2] == 2'd2 ? { 8'h0, 4'hf, ~i_wb_sel } :`
112			`{ 8'h0, ~i_wb_sel, 4'hf } ;`
113			`else
114			`o_wr_mask <= i_wb_adr[3:2] == 2'd0 ? { 12'hfff, ~i_wb_sel } :`
115			`i_wb_adr[3:2] == 2'd1 ? { 8'hff, ~i_wb_sel, 4'hf } :`
116			`i_wb_adr[3:2] == 2'd2 ? { 4'hf, ~i_wb_sel, 8'hff } :`
117			`{ ~i_wb_sel, 12'hfff } ;`
118			`endif
119
120			`o_wr_data <= {4{i_wb_dat}};`
121			`end`
122
123
124			`// ------------------------------------------------------`
125			`// Read`
126			`// ------------------------------------------------------`
127
128			`always @( posedge i_clk )`
129			`begin`
130			`if ( read_ack )`
131			`read_ready <= 1'd1;`
132			`else if ( start_read )`
133			`read_ready <= 1'd0;`
134
135			`start_write_d1 <= start_write;`
136			`start_read_d1 <= start_read;`
137			`wb_adr_d1 <= i_wb_adr;`
138
139			`if ( start_read )`
140			`start_read_hold <= 1'd1;`
141			`else if ( read_ack )`
142			`start_read_hold <= 1'd0;`
143
144			`if ( i_rd_empty == 1'd0 && start_read_hold )`
145			`begin`
146			`ifdef XILINX_VIRTEX6_FPGA
147			`o_wb_dat <= i_wb_adr[2] == 2'd2 ? i_rd_data[ 31:0] :`
148			`i_rd_data[ 63:32] ;`
149			`else
150			`o_wb_dat <= i_wb_adr[3:2] == 2'd0 ? i_rd_data[ 31: 0] :`
151			`i_wb_adr[3:2] == 2'd1 ? i_rd_data[ 63:32] :`
152			`i_wb_adr[3:2] == 2'd2 ? i_rd_data[ 95:64] :`
153			`i_rd_data[127:96] ;`
154			`endif
155			`read_ack <= 1'd1;`
156			`end`
157			`else`
158			`read_ack <= 1'd0;`
159			`end`
160
161			`assign o_wb_ack = i_wb_stb && ( start_write \|\| read_ack );`
162
163
164			`// Debug DDR3 - Wishbone Bridge - not synthesizable`
165			`// ========================================================`
166			`//synopsys translate_off`
167
168			`ifdef LP_MEMIF_DEBUG
169			`always @( posedge i_clk )`
170			`begin`
171			`if (start_write)`
172			`$display("DDR3 Write Addr 0x%08x Data 0x%08h %08h %08h %08h, BE %d%d%d%d %d%d%d%d %d%d%d%d %d%d%d%d",`
173			`i_i_wb_adr, i_mwdata[127:96], i_mwdata[95:64], i_mwdata[63:32], i_mwdata[31:0],`
174			`i_mwben[15], i_mwben[14], i_mwben[13], i_mwben[12],`
175			`i_mwben[11], i_mwben[10], i_mwben[9], i_mwben[8],`
176			`i_mwben[7], i_mwben[6], i_mwben[5], i_mwben[4],`
177			`i_mwben[3], i_mwben[2], i_mwben[1], i_mwben[0]`
178			`);`
179
180			`if (i_rd_empty == 1'd0)`
181			`$display("DDR3 Read Addr 0x%08x Data 0x%08h %08h %08h %08h",`
182			`i_i_wb_adr, i_rd_data[127:96], i_rd_data [95:64], i_rd_data [63:32], i_rd_data [31:0]);`
183			`end`
184			`endif
185			`//synopsys translate_on`
186
187
188			`endmodule`
189

Browse

Tools

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] [vlog/] [system/] [wb_ddr3_bridge.v] - Blame information for rev 47