Subversion Repositories amber

*** Steps to create the Spartan-6 DDR3 memory interface for the SP605 development board.

These instructions are based on using Xilinx ISE 11.5

Use Coregen/MIG 3.3 to create the controller.

- Component Name: ddr3

- Bank 3 Memory Type DDR3 SDRAM

- Frequency: 400MHz

- Memory Part: MT41J64M16XX-187E

- Configuration Selection: One 128-bit bi-directional port

- Memory Address Mapping Selection: Row, Bank, Column

Once the controller is generated copy all the Verilog files from the user_design/rtl directory to $AMBER_BASE/hw/vlog/xs6_ddr3.

Then make the following modifications

1. ddr3.v

Rename this module to mcb_ddr3.v.

Replace the inputs c3_sys_clk_p, c3_sys_clk_n with sys_clk_ibufg.

Delete the outputs c3_clk0 and c3_rst0.

2. memc3_infrastructure.v

Replace the inputs c3_sys_clk_p, c3_sys_clk_n with sys_clk_ibufg.

Delete the outputs c3_clk0 and c3_rst0.

Change the localparam from

localparam CLK_PERIOD_NS = C_MEMCLK_PERIOD / 1000.0;

to

localparam CLK_PERIOD_NS = C_MEMCLK_PERIOD / 500.0;

Delete the generate statement from lines 124 to 154

On the PLL_ADV instantiation,

    Change the parameter CLKFBOUT_MULT from 2 to 4.

    Disconnect the CLKOUT2 output

Delete the U_BUFG_CLK0 instantiation.

Delete the rst0_sync_r logic.