Subversion Repositories btcminer

/*!

   btcminer -- BTCMiner for ZTEX USB-FPGA Modules: HDL code for ZTEX USB-FPGA Module 1.15b (one double hash pipe)

   Copyright (C) 2011-2012 ZTEX GmbH

   http://www.ztex.de

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License version 3 as

   published by the Free Software Foundation.

   This program is distributed in the hope that it will be useful, but

   WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

   General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program; if not, see http://www.gnu.org/licenses/.

!*/

module ztex_ufm1_15d3 (fxclk_in, reset, clk_reset, pll_stop,  dcm_progclk, dcm_progdata, dcm_progen,  rd_clk, wr_clk, wr_start, read, write);

        input fxclk_in, reset, clk_reset, pll_stop, dcm_progclk, dcm_progdata, dcm_progen, rd_clk, wr_clk, wr_start;

        input [7:0] read;

        output [7:0] write;

        reg [3:0] rd_clk_b, wr_clk_b;

        reg wr_start_b1, wr_start_b2, reset_buf;

        reg dcm_progclk_buf, dcm_progdata_buf, dcm_progen_buf;

        reg [4:0] wr_delay;

        reg [351:0] inbuf, inbuf_tmp;

        reg [95:0] outbuf;

        reg [7:0] read_buf, write_buf;

        wire fxclk, clk, dcm_clk, pll_fb, pll_clk0, dcm_locked, pll_reset;

        wire [2:1] dcm_status;

        wire [31:0] golden_nonce, nonce2, hash2;

        miner253 m (

            .clk(clk),

            .reset(reset_buf),

            .midstate(inbuf[351:96]),

            .data(inbuf[95:0]),

            .golden_nonce(golden_nonce),

            .nonce2(nonce2),

            .hash2(hash2)

        );

        BUFG bufg_fxclk (

          .I(fxclk_in),

          .O(fxclk)

        );

        BUFG bufg_clk (

          .I(pll_clk0),

          .O(clk)

        );

        DCM_CLKGEN #(

          .CLKFX_DIVIDE(4.0),

          .CLKFX_MULTIPLY(32),

          .CLKFXDV_DIVIDE(2),

          .CLKIN_PERIOD(20.8333)

        )

        dcm0 (

          .CLKIN(fxclk),

          .CLKFXDV(dcm_clk),

          .FREEZEDCM(1'b0),

          .PROGCLK(dcm_progclk_buf),

          .PROGDATA(dcm_progdata_buf),

          .PROGEN(dcm_progen_buf),

          .LOCKED(dcm_locked),

          .STATUS(dcm_status),

          .RST(clk_reset)

        );

        PLL_BASE #(

            .BANDWIDTH("LOW"),

            .CLKFBOUT_MULT(4),

            .CLKOUT0_DIVIDE(4),

            .CLKOUT0_DUTY_CYCLE(0.5),

            .CLK_FEEDBACK("CLKFBOUT"),

            .COMPENSATION("INTERNAL"),

            .DIVCLK_DIVIDE(1),

            .REF_JITTER(0.10),

            .RESET_ON_LOSS_OF_LOCK("FALSE")

       )

       pll0 (

            .CLKFBOUT(pll_fb),

            .CLKOUT0(pll_clk0),

            .CLKFBIN(pll_fb),

            .CLKIN(dcm_clk),

            .RST(pll_reset)

        );

        assign write = write_buf;

        assign pll_reset = pll_stop | ~dcm_locked | clk_reset | dcm_status[2];

        always @ (posedge clk)

        begin

                if ( (rd_clk_b[3] == rd_clk_b[2]) && (rd_clk_b[2] == rd_clk_b[1]) && (rd_clk_b[1] != rd_clk_b[0]) )

                begin

                    inbuf_tmp[351:344] <= read_buf;

                    inbuf_tmp[343:0] <= inbuf_tmp[351:8];

                end;

                inbuf <= inbuf_tmp;  // due to TIG's

                if ( wr_start_b1 && wr_start_b2 )

                begin

                    wr_delay <= 5'd0;

                end else

                begin

                    wr_delay[0] <= 1'b1;

                    wr_delay[4:1] <= wr_delay[3:0];

                end

                if ( ! wr_delay[4] )

                begin

                    outbuf <= { hash2, nonce2, golden_nonce };

                end else

                begin

                    if ( (wr_clk_b[3] == wr_clk_b[2]) && (wr_clk_b[2] == wr_clk_b[1]) && (wr_clk_b[1] != wr_clk_b[0]) )

                        outbuf[87:0] <= outbuf[95:8];

                end

                read_buf <= read;

                write_buf <= outbuf[7:0];

                rd_clk_b[0] <= rd_clk;

                rd_clk_b[3:1] <= rd_clk_b[2:0];

                wr_clk_b[0] <= wr_clk;

                wr_clk_b[3:1] <= wr_clk_b[2:0];

                wr_start_b1 <= wr_start;

                wr_start_b2 <= wr_start_b1;

                reset_buf <= reset;

        end

        always @ (posedge fxclk)

        begin

                dcm_progclk_buf <= dcm_progclk;

                dcm_progdata_buf <= dcm_progdata;

                dcm_progen_buf <= dcm_progen;

        end

endmodule