OpenCores
URL https://opencores.org/ocsvn/cortexi/cortexi/trunk

Subversion Repositories cortexi

[/] [cortexi/] [trunk/] [uart.vhd] - Blame information for rev 11

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 9 riedelx 
library IEEE;
2 
use IEEE.STD_LOGIC_1164.ALL;
3 
use IEEE.STD_LOGIC_ARITH.ALL;
4 
use IEEE.STD_LOGIC_UNSIGNED.ALL;
5 
 
6 
-- uart baudrate
7 
-- baudrate register = 1  =>  clk / 8
8 
-- baudrate register = 2  =>  clk / 12
9 
-- baudrate register = N  =>  clk / ((N + 1) * 4)
10 
 
11 
entity uart is
12 
    Port ( clk     : in  std_logic;
13 
           rst     : in  std_logic;
14 
           datain  : in  std_logic_vector(7 downto 0);
15 
           dataout : out std_logic_vector(7 downto 0);
16 
           addr    : in  std_logic_vector(2 downto 0);
17 
           cs      : in  std_logic;
18 
           wr      : in  std_logic;
19 
           serIn   : in  std_logic;
20 
           serOut  : out std_logic);
21 
end uart;
22 
 
23 
architecture Behavioral of uart is
24 
 
25 
  type UARTregisters is array (0 to 7) of std_logic_vector(7 downto 0);
26 
  signal registers : UARTregisters;
27 
  signal txBaud    : std_logic_vector(15 downto 0);
28 
  signal rxBaud    : std_logic_vector(15 downto 0);
29 
  signal txFSM     : std_logic_vector(3 downto 0);
30 
  signal rxFSM     : std_logic_vector(3 downto 0);
31 
  signal txTick    : std_logic_vector(2 downto 0);
32 
  signal rxTick    : std_logic_vector(2 downto 0);
33 
  signal txBit     : std_logic_vector(2 downto 0);
34 
  signal rxBit     : std_logic_vector(2 downto 0);
35 
  signal sendRequest : std_logic;
36 
  signal serInput  : std_logic;
37 
 
38 
begin
39 
 
40 
  process(clk, rst)
41 
  begin
42 
    if falling_edge(clk) then
43 
      if rst = '0' then
44 
        for i in 0 to 7 loop
45 
          registers(i) <= x"00";
46 
        end loop;
47 
        txBaud      <= x"0000";
48 
        rxBaud      <= x"0000";
49 
        dataout     <= x"00";
50 
        sendRequest <= '0';
51 
        txFSM  <= "0000";
52 
        rxFSM  <= "0000";
53 
        txTick <= "000";
54 
        rxTick <= "000";
55 
        txBit  <= "000";
56 
        rxBit  <= "000";
57 
        serOut <= '1';
58 
        serInput <= '1';
59 
      else
60 
        serInput <= serIn;
61 
-------- access to UART registers -----------------------
62 
        if cs = '0' then   -- uart selected
63 
          if wr = '0' then -- write access
64 
            registers(conv_integer(addr)) <= datain;
65 
            if addr = "000" then
66 
              sendRequest <= '1';
67 
            end if;
68 
          else
69 
            if addr = "001" then
70 
              registers(4)(1) <= '0'; -- data ready
71 
              registers(4)(2) <= '0'; -- frame error
72 
            end if;
73 
            dataout <= registers(conv_integer(addr));
74 
          end if;
75 
        end if;
76 
-------- baudrate ---------------------------------------
77 
        txBaud <= txBaud + 1;
78 
        if txBaud = (registers(2) & registers(3)) then
79 
          txBaud <= x"0000";
80 
        end if;
81 
        rxBaud <= rxBaud + 1;
82 
        if rxBaud = (registers(2) & registers(3)) then
83 
          rxBaud <= x"0000";
84 
        end if;
85 
-------- transmitter ------------------------------------
86 
        case txFSM is
87 
          when "0000" => --##### tx idle #####
88 
            if sendRequest = '1' then
89 
              registers(4)(0) <= '1'; -- tx busy
90 
              sendRequest <= '0';
91 
              txFSM  <= "0001";
92 
              txBaud <= x"0000";
93 
              txTick <= "000";
94 
              txBit  <= "000";
95 
              serOut <= '0';  -- start bit
96 
            end if;
97 
          when "0001" => --##### send start bit #####
98 
            if txBaud = x"0000" then
99 
              txTick <= txTick + 1;
100 
              if txTick = "011" then
101 
                txTick <= "000";
102 
                txFSM  <= "0010";
103 
                serOut <= registers(0)(conv_integer(txBit));
104 
                txBit  <= txBit + 1;
105 
              end if;
106 
            end if;
107 
          when "0010" => --##### send data bits #####
108 
            if txBaud = x"0000" then
109 
              txTick <= txTick + 1;
110 
              if txTick = "011" then
111 
                txTick <= "000";
112 
                serOut <= registers(0)(conv_integer(txBit));
113 
                txBit  <= txBit + 1;
114 
                if txBit = "111" then
115 
                  txFSM <= "0011";
116 
                end if;
117 
              end if;
118 
            end if;
119 
          when "0011" => --##### send stop bit #####
120 
            if txBaud = x"0000" then
121 
              txTick <= txTick + 1;
122 
              if txTick = "011" then
123 
                txTick <= "000";
124 
                serOut <= '1';
125 
                txFSM  <= "0100";
126 
              end if;
127 
            end if;
128 
          when "0100" => --##### finishing stop bit #####
129 
            if txBaud = x"0000" then
130 
              txTick <= txTick + 1;
131 
              if txTick = "011" then
132 
                txFSM <= "0000";
133 
                registers(4)(0) <= '0'; -- tx ready
134 
              end if;
135 
            end if;
136 
          when others =>
137 
            txFSM <= "0000";
138 
        end case; -- txFSM
139 
-------- receiver ------------------------------------
140 
        case rxFSM is
141 
          when "0000" => --##### awaiting start bit #####
142 
            if serInput = '0' then
143 
              rxBaud <= x"0000";
144 
              rxTick <= "000";
145 
              rxFSM  <= "0001";
146 
            end if;
147 
          when "0001" => --##### cnt to middle start bit #####
148 
            if rxBaud = x"0000" then
149 
              rxTick <= rxTick + 1;
150 
              if rxTick = "001" then
151 
                if serInput = '1' then -- false start bit
152 
                  rxFSM <= "0000";
153 
                else
154 
                  rxTick <= "000";
155 
                  rxBit  <= "000";
156 
                  rxFSM  <= "0010";
157 
                end if;
158 
              end if;
159 
            end if;
160 
          when "0010" => --##### receive bits ######
161 
            if rxBaud = x"0000" then
162 
              rxTick <= rxTick + 1;
163 
              if rxTick = "011" then
164 
                rxTick <= "000";
165 
                registers(1)(conv_integer(rxBit)) <= serInput;
166 
                rxBit <= rxBit + 1;
167 
                if rxBit = "111" then -- last bit
168 
                  rxFSM <= "0011";
169 
                end if;
170 
              end if;
171 
            end if;
172 
          when "0011" => --##### receive stop bit #####
173 
            if rxBaud = x"0000" then
174 
              rxTick <= rxTick + 1;
175 
              if rxTick = "011" then
176 
                if serInput = '0' then
177 
                  registers(4)(2) <= '1'; -- frame error
178 
                else
179 
                  registers(4)(1) <= '1'; -- data ready
180 
                end if;
181 
                rxFSM <= "0000";
182 
              end if;
183 
            end if;
184 
          when others =>
185 
            rxFSM <= "0000";
186 
        end case; -- rxFSM
187 
      end if; -- rst = '0'
188 
    end if; -- rising_edge(clk)
189 
  end process;
190 
 
191 
end Behavioral;

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.