Subversion Repositories crcahb

//////////////////////////////////////////////////////////////////

////

////

////    CRCAHB CORE BLOCK

////

////

////

//// This file is part of the APB to I2C project

////

//// http://www.opencores.org/cores/apbi2c/

////

////

////

//// Description

////

//// Implementation of APB IP core according to

////

//// crcahb IP core specification document.

////

////

////

//// To Do: Things are right here but always all block can suffer changes

////

////

////

////

////

//// Author(s): -  Julio Cesar 

////

///////////////////////////////////////////////////////////////// 

////

////

//// Copyright (C) 2009 Authors and OPENCORES.ORG

////

////

////

//// This source file may be used and distributed without

////

//// restriction provided that this copyright statement is not

////

//// removed from the file and that any derivative work contains

//// the original copyright notice and the associated disclaimer.

////

////

//// This source file is free software; you can redistribute it

////

//// and/or modify it under the terms of the GNU Lesser General

////

//// Public License as published by the Free Software Foundation;

//// either version 2.1 of the License, or (at your option) any

////

//// later version.

////

////

////

//// This source is distributed in the hope that it will be

////

//// useful, but WITHOUT ANY WARRANTY; without even the implied

////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR

////

//// PURPOSE. See the GNU Lesser General Public License for more

//// details.

////

////

////

//// You should have received a copy of the GNU Lesser General

////

//// Public License along with this source; if not, download it

////

//// from http://www.opencores.org/lgpl.shtml

////

////

///////////////////////////////////////////////////////////////////

module host_interface

(

        //OUTPUTS

        output [31:0] HRDATA,

        output HREADYOUT,

        output HRESP,

        output [31:0] bus_wr,

        output [ 1:0] crc_poly_size,

        output [ 1:0] bus_size,

        output [ 1:0] rev_in_type,

        output rev_out_type,

        output crc_init_en,

        output crc_idr_en,

        output crc_poly_en,

        output buffer_write_en,

        output reset_chain,

        //INPUTS

        input [31:0] HWDATA,

        input [31:0] HADDR,

        input [ 2:0] HSIZE,

        input [ 1:0] HTRANS,

        input HWRITE,

        input HSElx,

        input HREADY,

        input HRESETn,

        input HCLK,

        input [31:0] crc_poly_out,

        input [31:0] crc_out,

        input [31:0] crc_init_out,

        input [ 7:0] crc_idr_out,

        input buffer_full,

        input reset_pending,

        input read_wait

);

//Reset Values

localparam RESET_CRC_CR = 6'h00;

//CRC Register Map

localparam CRC_DR   = 3'h0;

localparam CRC_IDR  = 3'h1;

localparam CRC_CR   = 3'h2;

localparam CRC_INIT = 3'h4;

localparam CRC_POL  = 3'h5;

//Transfer Type Encoding

localparam IDLE    = 2'b00;

localparam BUSY    = 2'b01;

localparam NON_SEQ = 2'b10;

localparam SEQ     = 2'b11;

//HRESP Encoding

localparam OK    = 1'b0;

localparam ERROR = 1'b1;

//Pipeline flops

reg [2:0] haddr_pp;

reg [2:0] hsize_pp;

reg [1:0] htrans_pp;

reg hwrite_pp;

reg hselx_pp;

//Flops

reg [4:0] crc_cr_ff;

//Internal Signals

wire [31:0] crc_cr_rd;

wire crc_dr_sel;

wire crc_init_sel;

wire crc_idr_sel;

wire crc_poly_sel;

wire crc_cr_sel;

wire ahb_enable;

wire write_en;

wire read_en;

wire crc_cr_en;

wire sample_bus;

wire buffer_read_en;

//Pipeline Registers for Address Phase of AHB Protocol

always @(posedge HCLK)

        begin

                if(!HRESETn)

                        begin

                                hselx_pp <= 1'b0;

                        end

                else

                        if(sample_bus)

                                begin

                                        haddr_pp  <= HADDR[4:2];

                                        hsize_pp  <= HSIZE;

                                        htrans_pp <= HTRANS;

                                        hwrite_pp <= HWRITE;

                                        hselx_pp  <= HSElx;

                                end

        end

//Enable Signals

assign ahb_enable = (htrans_pp == NON_SEQ);

assign write_en = hselx_pp &&  hwrite_pp && ahb_enable;

assign read_en  = hselx_pp && !hwrite_pp && ahb_enable;

//Registers decoding

assign crc_dr_sel   = (haddr_pp == CRC_DR  );

assign crc_init_sel = (haddr_pp == CRC_INIT);

assign crc_idr_sel  = (haddr_pp == CRC_IDR );

assign crc_poly_sel = (haddr_pp == CRC_POL );

assign crc_cr_sel   = (haddr_pp == CRC_CR  );

//Write Esnables Signals for Registers

assign buffer_write_en = crc_dr_sel   && write_en;

assign crc_init_en     = crc_init_sel && write_en;

assign crc_idr_en      = crc_idr_sel  && write_en;

assign crc_poly_en     = crc_poly_sel && write_en;

assign crc_cr_en       = crc_cr_sel   && write_en;

//Indicates reading operation request to crc_dr register

assign buffer_read_en = crc_dr_sel && read_en;

//Bus Size is the output of HSIZE pipeline register

assign bus_size = hsize_pp;

//The Write Bus is not pipelined

assign bus_wr = HWDATA;

//HREADY Signal outputed to Master

assign HREADYOUT = !((buffer_write_en && buffer_full   ) ||

                     (buffer_read_en  && read_wait     ) ||

                     (crc_init_en     && reset_pending ) );

//Signal to control sampling of bus

assign sample_bus = HREADYOUT && HREADY;

//HRESP Signal outputed to Master

//This implementation never signalize bus error to master

assign HRESP = OK;

//CRC_CR Data Read

assign crc_cr_rd = {24'h0, crc_cr_ff[4:0], 3'h0};

//Mux to HRDATA

assign HRDATA = ({32{crc_dr_sel  }} & crc_out             ) |

                ({32{crc_init_sel}} & crc_init_out        ) |

                ({32{crc_idr_sel }} & {24'h0, crc_idr_out}) |

                ({32{crc_poly_sel}} & crc_poly_out        ) |

                ({32{crc_cr_sel  }} & crc_cr_rd           ) ;

//Control Register

always @(posedge HCLK)

        begin

                if(!HRESETn)

                        crc_cr_ff <= RESET_CRC_CR;

                else

                        if(crc_cr_en)

                                crc_cr_ff <= {HWDATA[7], HWDATA[6:5], HWDATA[4:3]};

        end

//Configuration Signals

assign reset_chain   = (crc_cr_en && HWDATA[0]);

assign crc_poly_size = crc_cr_ff[1:0];

assign rev_in_type   = crc_cr_ff[3:2];

assign rev_out_type  = crc_cr_ff[4];

endmodule