URL https://opencores.org/ocsvn/dbg_interface/dbg_interface/trunk

Subversion Repositories dbg_interface

[/] [dbg_interface/] [trunk/] [bench/] [verilog/] [dbg_tb.v] - Blame information for rev 121

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  dbg_tb.v                                                    ////
////                                                              ////
////                                                              ////
////  This file is part of the SoC/OpenRISC Development Interface ////
////  http://www.opencores.org/projects/DebugInterface/           ////
////                                                              ////
////  Author(s):                                                  ////
////       Igor Mohor (igorm@opencores.org)                       ////
////                                                              ////
////                                                              ////
////  All additional information is avaliable in the README.txt   ////
////  file.                                                       ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 - 2004 Authors                            ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.35  2004/01/22 11:07:28  mohor
// test stall_test added.
//
// Revision 1.34  2004/01/20 14:24:08  mohor
// Define name changed.
//
// Revision 1.33  2004/01/20 14:05:26  mohor
// Data latching changed when testing WB.
//
// Revision 1.32  2004/01/20 10:23:21  mohor
// More debug data added.
//
// Revision 1.31  2004/01/20 09:07:44  mohor
// CRC generation iand verification in bench changed.
//
// Revision 1.30  2004/01/20 08:03:35  mohor
// IDCODE test improved.
//
// Revision 1.29  2004/01/19 13:13:18  mohor
// Define tap_defines.v added to test bench.
//
// Revision 1.28  2004/01/19 12:38:10  mohor
// Waiting for "ready" improved.
//
// Revision 1.27  2004/01/17 18:01:31  mohor
// New version.
//
// Revision 1.26  2004/01/17 17:01:25  mohor
// Almost finished.
//
// Revision 1.25  2004/01/16 14:51:24  mohor
// cpu registers added.
//
// Revision 1.24  2004/01/15 10:47:13  mohor
// Working.
//
// Revision 1.23  2004/01/14 22:59:01  mohor
// Temp version.
//
// Revision 1.22  2004/01/13 11:28:30  mohor
// tmp version.
//
// Revision 1.21  2004/01/10 07:50:41  mohor
// temp version.
//
// Revision 1.20  2004/01/09 12:49:23  mohor
// tmp version.
//
// Revision 1.19  2004/01/08 17:53:12  mohor
// tmp version.
//
// Revision 1.18  2004/01/07 11:59:48  mohor
// temp4 version.
//
// Revision 1.17  2004/01/06 17:14:59  mohor
// temp3 version.
//
// Revision 1.16  2004/01/05 12:16:50  mohor
// tmp2 version.
//
// Revision 1.15  2003/12/23 14:26:01  mohor
// New version of the debug interface. Not finished, yet.
//
// Revision 1.14  2003/10/23 16:16:30  mohor
// CRC logic changed.
//
// Revision 1.13  2003/08/28 13:54:33  simons
// Three more chains added for cpu debug access.
//
// Revision 1.12  2002/05/07 14:44:52  mohor
// mon_cntl_o signals that controls monitor mux added.
//
// Revision 1.11  2002/03/12 14:32:26  mohor
// Few outputs for boundary scan chain added.
//
// Revision 1.10  2002/03/08 15:27:08  mohor
// Structure changed. Hooks for jtag chain added.
//
// Revision 1.9  2001/10/19 11:39:20  mohor
// dbg_timescale.v changed to timescale.v This is done for the simulation of
// few different cores in a single project.
//
// Revision 1.8  2001/10/17 10:39:17  mohor
// bs_chain_o added.
//
// Revision 1.7  2001/10/16 10:10:18  mohor
// Signal names changed to lowercase.
//
// Revision 1.6  2001/10/15 09:52:50  mohor
// Wishbone interface added, few fixes for better performance,
// hooks for boundary scan testing added.
//
// Revision 1.5  2001/09/24 14:06:12  mohor
// Changes connected to the OpenRISC access (SPR read, SPR write).
//
// Revision 1.4  2001/09/20 10:10:29  mohor
// Working version. Few bugs fixed, comments added.
//
// Revision 1.3  2001/09/19 11:54:03  mohor
// Minor changes for simulation.
//
// Revision 1.2  2001/09/18 14:12:43  mohor
// Trace fixed. Some registers changed, trace simplified.
//
// Revision 1.1.1.1  2001/09/13 13:49:19  mohor
// Initial official release.
//
// Revision 1.3  2001/06/01 22:23:40  mohor
// This is a backup. It is not a fully working version. Not for use, yet.
//
// Revision 1.2  2001/05/18 13:10:05  mohor
// Headers changed. All additional information is now avaliable in the README.txt file.
//
// Revision 1.1.1.1  2001/05/18 06:35:15  mohor
// Initial release
//
//
 
 
`include "timescale.v"
`include "tap_defines.v"
`include "dbg_defines.v"
`include "dbg_wb_defines.v"
`include "dbg_cpu_defines.v"
 
// Test bench
module dbg_tb;
 
parameter TCLK = 50;   // Clock half period (Clok period = 100 ns => 10 MHz)
 
reg   tms_pad_i;
reg   tck_pad_i;
reg   trst_pad_i;
reg   tdi_pad_i;
wire  tdo_pad_o;
wire  tdo_padoe_o;
 
wire  shift_dr_o;
wire  pause_dr_o;
wire  update_dr_o;
wire  capture_dr_o;
 
wire  extest_select_o;
wire  sample_preload_select_o;
wire  mbist_select_o;
wire  debug_select_o;
 
// WISHBONE common signals
reg   wb_rst_i;
reg   wb_clk_i;
 
// WISHBONE master interface
wire [31:0] wb_adr_o;
wire [31:0] wb_dat_o;
wire [31:0] wb_dat_i;
wire        wb_cyc_o;
wire        wb_stb_o;
wire  [3:0] wb_sel_o;
wire        wb_we_o;
wire        wb_ack_i;
wire        wb_cab_o;
wire        wb_err_i;
wire  [2:0] wb_cti_o;
wire  [1:0] wb_bte_o;
 
// CPU signals
wire        cpu_clk_i;
wire [31:0] cpu_addr_o;
wire [31:0] cpu_data_i;
wire [31:0] cpu_data_o;
wire        cpu_bp_i;
wire        cpu_stall_o;
wire        cpu_stall_all_o;
wire        cpu_stb_o;
wire  [`CPU_NUM -1:0]  cpu_sel_o;
wire        cpu_we_o;
wire        cpu_ack_i;
wire        cpu_rst_o;
 
// Text used for easier debugging
reg [199:0] test_text;
reg   [2:0] last_wb_cmd;
reg [199:0] last_wb_cmd_text;
 
reg  [31:0] wb_data [0:4095];   // Data that is written to (read from) wishbone is stored here. 
 
 
 
wire  tdo_o;
 
wire  debug_tdi_i;
wire  bs_chain_tdi_i;
wire  mbist_tdi_i;
 
reg   test_enabled;
 
reg [31:0] result;
reg [31:0] in_data_le, in_data_be;
reg [31:0] id;
 
wire crc_match_in;
reg [31:0] crc_in;
reg [31:0] crc_out;
 
 
wire tdo;
 
assign tdo = tdo_padoe_o? tdo_pad_o : 1'hz;
 
// Connecting TAP module
tap_top i_tap_top (
                    .tms_pad_i        (tms_pad_i),
                    .tck_pad_i        (tck_pad_i),
                    .trst_pad_i       (!trst_pad_i),
                    .tdi_pad_i        (tdi_pad_i),
                    .tdo_pad_o        (tdo_pad_o),
                    .tdo_padoe_o      (tdo_padoe_o),
 
                    // TAP states
                    .shift_dr_o       (shift_dr_o),
                    .pause_dr_o       (pause_dr_o),
                    .update_dr_o      (update_dr_o),
                    .capture_dr_o     (capture_dr_o),
 
                    // Select signals for boundary scan or mbist
                    .extest_select_o  (extest_select_o),
                    .sample_preload_select_o(sample_preload_select_o),
                    .mbist_select_o   (mbist_select_o),
                    .debug_select_o   (debug_select_o),
 
                    // TDO signal that is connected to TDI of sub-modules.
                    .tdo_o            (tdo_o),
 
                    // TDI signals from sub-modules
                    .debug_tdi_i      (debug_tdi_i),        // from debug module
                    .bs_chain_tdi_i   (bs_chain_tdi_i),  // from Boundary Scan Chain
                    .mbist_tdi_i      (mbist_tdi_i)         // from Mbist Chain
 
               );
 
 
// Connecting debug top module
dbg_top i_dbg_top  (
                    .tck_i            (tck_pad_i),
                    .tdi_i            (tdo_o),
                    .tdo_o            (debug_tdi_i),
 
                    // TAP states
                    .shift_dr_i       (shift_dr_o),
                    .pause_dr_i       (pause_dr_o),
                    .update_dr_i      (update_dr_o),
 
                    // Instructions
                    .debug_select_i   (debug_select_o),
 
                    // WISHBONE common signals
                    .wb_rst_i         (wb_rst_i),
                    .wb_clk_i         (wb_clk_i),
 
                    // WISHBONE master interface
                    .wb_adr_o         (wb_adr_o),
                    .wb_dat_o         (wb_dat_o),
                    .wb_dat_i         (wb_dat_i),
                    .wb_cyc_o         (wb_cyc_o),
                    .wb_stb_o         (wb_stb_o),
                    .wb_sel_o         (wb_sel_o),
                    .wb_we_o          (wb_we_o),
                    .wb_ack_i         (wb_ack_i),
                    .wb_cab_o         (wb_cab_o),
                    .wb_err_i         (wb_err_i),
                    .wb_cti_o         (wb_cti_o),
                    .wb_bte_o         (wb_bte_o),
 
                    // CPU signals
                    .cpu_clk_i        (cpu_clk_i),
                    .cpu_addr_o       (cpu_addr_o),
                    .cpu_data_i       (cpu_data_i),
                    .cpu_data_o       (cpu_data_o),
                    .cpu_bp_i         (cpu_bp_i),
                    .cpu_stall_o      (cpu_stall_o),
                    .cpu_stall_all_o  (cpu_stall_all_o),
                    .cpu_stb_o        (cpu_stb_o),
                    .cpu_sel_o        (cpu_sel_o),
                    .cpu_we_o         (cpu_we_o),
                    .cpu_ack_i        (cpu_ack_i),
                    .cpu_rst_o        (cpu_rst_o)
 
 
 
 
                   );
 
 
 
wb_slave_behavioral wb_slave
                   (
                    .CLK_I            (wb_clk_i),
                    .RST_I            (wb_rst_i),
                    .ACK_O            (wb_ack_i),
                    .ADR_I            (wb_adr_o),
                    .CYC_I            (wb_cyc_o),
                    .DAT_O            (wb_dat_i),
                    .DAT_I            (wb_dat_o),
                    .ERR_O            (wb_err_i),
                    .RTY_O            (),      // NOT USED for now!
                    .SEL_I            (wb_sel_o),
                    .STB_I            (wb_stb_o),
                    .WE_I             (wb_we_o),
                    .CAB_I            (1'b0)
                   );
 
 
 
cpu_behavioral i_cpu_behavioral
                   (
                    // CPU signals
                    .cpu_rst_i        (wb_rst_i),
                    .cpu_clk_o        (cpu_clk_i),
                    .cpu_addr_i       (cpu_addr_o),
                    .cpu_data_o       (cpu_data_i),
                    .cpu_data_i       (cpu_data_o),
                    .cpu_bp_o         (cpu_bp_i),
                    .cpu_stall_i      (cpu_stall_o),
                    .cpu_stall_all_i  (cpu_stall_all_o),
                    .cpu_stb_i        (cpu_stb_o),
                    .cpu_sel_i        (cpu_sel_o),
                    .cpu_we_i         (cpu_we_o),
                    .cpu_ack_o        (cpu_ack_i),
                    .cpu_rst_o        (cpu_rst_o)
                   );
 
 
 
 
// Initial values
initial
begin
  trst_pad_i = 1'b1;
  tms_pad_i = 1'hz;
  tck_pad_i = 1'hz;
  tdi_pad_i = 1'hz;
 
  #100;
  trst_pad_i = 1'b0;
  #100;
  trst_pad_i = 1'b1;
end
 
initial
begin
  test_enabled = 1'b0;
  wb_rst_i = 1'b0;
  #1000;
  wb_rst_i = 1'b1;
  #1000;
  wb_rst_i = 1'b0;
 
  // Initial values for wishbone slave model
  wb_slave.cycle_response(`ACK_RESPONSE, 9'h55, 8'h2);   // (`ACK_RESPONSE, wbs_waits, wbs_retries);
  #1 test_enabled<=#1 1'b1;
end
 
initial
begin
  wb_clk_i = 1'b0;
  forever #5 wb_clk_i = ~wb_clk_i;
end
 
always @ (posedge test_enabled)
begin
 
  $display("//////////////////////////////////////////////////////////////////");
  $display("//                                                              //");
  $display("//  (%0t) dbg_tb starting                                     //", $time);
  $display("//                                                              //");
  $display("//////////////////////////////////////////////////////////////////");
 
  initialize_memory(32'h12340000, 32'h00100000);  // Initialize 0x100000 bytes starting from address 0x12340000
 
  reset_tap;
 
  #500;
  goto_run_test_idle;
 
  // Test stall signal
  stall_test;
 
  // Testing read and write to internal registers
  #10000;
 
  set_instruction(`IDCODE);
  read_id_code(id);
 
  $display("\tRead ID     = 0x%0x", id);
  $display("\tExpected ID = 0x%0x", `IDCODE_VALUE);
 
  set_instruction(`DEBUG);
  #10000;
 
  chain_select(`WISHBONE_DEBUG_CHAIN, 1'b0);   // {chain, gen_crc_err}
 
//  #10000;
//  xxx(4'b1001, 32'he579b242);
 
  #10000;
 
//  debug_wishbone(`WB_READ8, 1'b0, 32'h12345678, 16'h4, 1'b0, "abc 1"); // {command, ready, addr, length, gen_crc_err, text}
//  debug_wishbone(`WB_READ8, 1'b0, 32'h12345679, 16'h4, 1'b0, "abc 2"); // {command, ready, addr, length, gen_crc_err, text}
//  debug_wishbone(`WB_READ8, 1'b0, 32'h1234567a, 16'h4, 1'b0, "abc 3"); // {command, ready, addr, length, gen_crc_err, text}
//
//  debug_wishbone(`WB_READ16, 1'b0, 32'h12345678, 16'h4, 1'b0, "abc 4"); // {command, ready, addr, length, gen_crc_err, text}
//  debug_wishbone(`WB_READ16, 1'b0, 32'h1234567a, 16'h4, 1'b0, "abc 5"); // {command, ready, addr, length, gen_crc_err, text}
//
  debug_wishbone(`WB_READ32, 1'b0, 32'h12345678, 16'h4, 1'b0, "read32 1"); // {command, ready, addr, length, gen_crc_err, text}
//
//  debug_wishbone(`WB_READ16, 1'b0, 32'h12345679, 16'h4, 1'b0, "abc 6"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
//  xxx(4'b1001, 32'he579b242);
 
  debug_wishbone(`WB_READ32, 1'b1, 32'h12345678, 16'h4, 1'b0, "read32 2"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  wb_slave.cycle_response(`ACK_RESPONSE, 9'h55, 8'h2);   // (`ACK_RESPONSE, wbs_waits, wbs_retries);
  debug_wishbone(`WB_READ32, 1'b1, 32'h12346668, 16'h4, 1'b0, "read32 3"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  wb_slave.cycle_response(`ERR_RESPONSE, 9'h03, 8'h2);   // (`ERR_RESPONSE, wbs_waits, wbs_retries);
  debug_wishbone(`WB_READ32, 1'b1, 32'h12346668, 16'h4, 1'b0, "read32 4"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  debug_wishbone(`WB_STATUS, 1'b0, 32'h0, 16'h0, 1'b0, "status 1"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  debug_wishbone(`WB_STATUS, 1'b0, 32'h0, 16'h0, 1'b0, "status 2"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  wb_slave.cycle_response(`ACK_RESPONSE, 9'h012, 8'h2);   // (`ACK_RESPONSE, wbs_waits, wbs_retries);
  debug_wishbone(`WB_READ32, 1'b1, 32'h12347778, 16'hc, 1'b0, "read32 5"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  debug_wishbone(`WB_WRITE32, 1'b0, 32'h12346668, 16'h8, 1'b0, "wr32 len8"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  debug_wishbone(`WB_WRITE16, 1'b0, 32'h12344446, 16'h8, 1'b0, "wr16 len8"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  debug_wishbone(`WB_WRITE8, 1'b0, 32'h1234010e, 16'h8, 1'b0, "wr8 len8"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  debug_wishbone(`WB_GO, 1'b0, 32'h0, 16'h0, 1'b0, "go 1"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  debug_wishbone(`WB_READ32, 1'b1, 32'h12340100, 16'hc, 1'b0, "read32 6"); // {command, ready, addr, length, gen_crc_err, text}
//  debug_wishbone(`WB_READ32, 1'b1, 32'h12340100, 16'hfffc, 1'b0, "read32 6"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
//  debug_wishbone(`WB_READ16, 1'b1, 32'h12340102, 16'he, 1'b0, "read16 7"); // {command, ready, addr, length, gen_crc_err, text}
//  debug_wishbone(`WB_READ16, 1'b1, 32'h12340102, 16'hfffe, 1'b0, "read16 7"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
//  debug_wishbone(`WB_READ8, 1'b1, 32'h12348804, 16'h6, 1'b0, "read8 8"); // {command, ready, addr, length, gen_crc_err, text}  
//  debug_wishbone(`WB_READ8, 1'b1, 32'h12348804, 16'hfffc, 1'b0, "read8 8"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  debug_wishbone(`WB_GO, 1'b0, 32'h0, 16'h0, 1'b0, "go 2"); // {command, ready, addr, length, gen_crc_err, text}
 
  #10000;
  chain_select(`CPU_DEBUG_CHAIN, 1'b0);   // {chain, gen_crc_err}
 
 
 
 
  // Select cpu0
  #10000;
  debug_cpu(`CPU_WRITE_REG, `CPU_SEL_ADR, 32'h0, 1'b0, result, "select cpu 0"); // {command, addr, data, gen_crc_err, result, text}
 
  #10000;
  debug_cpu(`CPU_GO, 32'h0, 32'h1, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
 
  // Read register
  #10000;
  debug_cpu(`CPU_READ_REG, `CPU_SEL_ADR, 32'h0, 1'b0, result, "cpu_read_reg"); // {command, addr, data, gen_crc_err, result, text}
 
  #10000;
  debug_cpu(`CPU_GO, 32'h0, 32'hff, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
 
  // Stall cpu0
  #10000;
  debug_cpu(`CPU_WRITE_REG, `CPU_OP_ADR, 32'h0, 1'b0, result, "stall cpu0"); // {command, addr, data, gen_crc_err, result, text}
 
  #10000;
  debug_cpu(`CPU_GO, 32'h0, 32'h1, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
 
  // write to cpu 32-bit
  #10000;
  debug_cpu(`CPU_WRITE32, 32'h32323232, 32'h0, 1'b0, result, "cpu_write_32"); // {command, addr, data, gen_crc_err, result, text}
 
  #10000;
  debug_cpu(`CPU_GO, 32'h0, 32'hdeadbeef, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
 
  // read from cpu 32-bit
  #10000;
  debug_cpu(`CPU_READ32, 32'h32323232, 32'h0, 1'b0, result, "cpu_read_32"); // {command, addr, data, gen_crc_err, result, text}
 
  #10000;
  debug_cpu(`CPU_GO, 32'h0, 32'hdeadbeef, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
 
  // write to cpu 8-bit
  #10000;
  debug_cpu(`CPU_WRITE8, 32'h08080808, 32'h0, 1'b0, result, "cpu_write_8"); // {command, addr, data, gen_crc_err, result, text}
 
  #10000;
  debug_cpu(`CPU_GO, 32'h0, 32'hdeadbeef, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
 
  // read from cpu 8-bit
  #10000;
  debug_cpu(`CPU_READ8, 32'h08080808, 32'h0, 1'b0, result, "cpu_read_8"); // {command, addr, data, gen_crc_err, result, text}
 
  #10000;
  debug_cpu(`CPU_GO, 32'h0, 32'hdeadbeef, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
 
 
 
 
 
 
 
 
 
 
  #5000 gen_clk(1);            // One extra TCLK for debugging purposes
  $display("\n\nSimulation end.");
  #1000 $stop;
 
end
 
 
task stall_test;
  integer i;
 
  begin
    test_text = "stall_test";
    $display("\n\n(%0t) stall_test started", $time);
 
    // Set bp_i active for 1 clock cycle and check is stall is set or not
    check_stall(0); // Should not be set at the beginning
    @ (posedge wb_clk_i);
    #1 dbg_tb.i_cpu_behavioral.cpu_bp_o = 1'b1;
    #1 check_stall(1); // set?
    @ (posedge wb_clk_i);
    #1 dbg_tb.i_cpu_behavioral.cpu_bp_o = 1'b0;
    #1 check_stall(1); // set?
 
    gen_clk(1);
    #1 check_stall(1); // set?
 
    // Unstall with register
    set_instruction(`DEBUG);
    chain_select(`CPU_DEBUG_CHAIN, 1'b0);   // {chain, gen_crc_err}
    #1 check_stall(1); // set?
    debug_cpu(`CPU_WRITE_REG, `CPU_OP_ADR, 32'h0, 1'b0, result, "clr unstall"); // {command, addr, data, gen_crc_err, result, text}
    #1 check_stall(1); // set?
    debug_cpu(`CPU_GO, 32'h0, 32'h0, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
    #1 check_stall(0); // reset?
 
    // Set stall with register
    debug_cpu(`CPU_WRITE_REG, `CPU_OP_ADR, 32'h0, 1'b0, result, "clr stall"); // {command, addr, data, gen_crc_err, result, text}
    #1 check_stall(0); // reset?
    debug_cpu(`CPU_GO, 32'h0, 32'h1, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
    #1 check_stall(1); // set?
 
    // Unstall with register
    debug_cpu(`CPU_WRITE_REG, `CPU_OP_ADR, 32'h0, 1'b0, result, "clr unstall"); // {command, addr, data, gen_crc_err, result, text}
    #1 check_stall(1); // set?
    debug_cpu(`CPU_GO, 32'h0, 32'h0, 1'b0, result, "go cpu"); // {command, addr, data, gen_crc_err, result, text}
    #1 check_stall(0); // reset?
 
    $display("\n\n(%0t) stall_test passed\n\n", $time);
  end
endtask   // stall_test
 
 
task check_stall;
  input should_be_set;
  begin
    if (should_be_set && (!cpu_stall_o))
      begin
        $display ("\t\t(%0t) ERROR: cpu_stall_o is not set but should be.", $time);
        $stop;
      end
    if ((!should_be_set) && cpu_stall_o)
      begin
        $display ("\t\t(%0t) ERROR: cpu_stall_o set but shouldn't be.", $time);
        $stop;
      end
  end
endtask   // check_stall
 
 
task initialize_memory;
  input [31:0] start_addr;
  input [31:0] length;
  integer i;
  reg [31:0] addr;
  begin
    for (i=0; i<length; i=i+4)  // This data will be return from wb slave
      begin
        addr = start_addr + i;
        wb_slave.wr_mem(addr, {addr[7:0], addr[7:0]+2'd1, addr[7:0]+2'd2, addr[7:0]+2'd3}, 4'hf);    // adr, data, sel
      end
    for (i=0; i<4096; i=i+1)  // This data will be written to wb slave
      begin
        wb_data[i] <= {i[7:0], i[7:0]+2'd1, i[7:0]+2'd2, i[7:0]+2'd3};
      end
  end
endtask
 
 
 
// Generation of the TCLK signal
task gen_clk;
  input [7:0] num;
  integer i;
  begin
    for(i=0; i<num; i=i+1)
      begin
        #TCLK tck_pad_i<=1;
        #TCLK tck_pad_i<=0;
      end
  end
endtask
 
 
// TAP reset
task reset_tap;
  begin
    $display("(%0t) Task reset_tap", $time);
    tms_pad_i<=#1 1'b1;
    gen_clk(5);
  end
endtask
 
 
// Goes to RunTestIdle state
task goto_run_test_idle;
  begin
    $display("(%0t) Task goto_run_test_idle", $time);
    tms_pad_i<=#1 1'b0;
    gen_clk(1);
  end
endtask
 
 
 
// sets the instruction to the IR register and goes to the RunTestIdle state
task set_instruction;
  input [3:0] instr;
  integer i;
 
  begin
    case (instr)
      `EXTEST          : $display("(%0t) Task set_instruction (EXTEST)", $time);
      `SAMPLE_PRELOAD  : $display("(%0t) Task set_instruction (SAMPLE_PRELOAD)", $time);
      `IDCODE          : $display("(%0t) Task set_instruction (IDCODE)", $time);
      `DEBUG           : $display("(%0t) Task set_instruction (DEBUG)", $time);
      `MBIST           : $display("(%0t) Task set_instruction (MBIST)", $time);
      `BYPASS          : $display("(%0t) Task set_instruction (BYPASS)", $time);
      default
                       begin
                         $display("(%0t) Task set_instruction (Unsupported instruction !!!)", $time);
                         $display("\tERROR: Unsupported instruction !!!", $time);
                         $stop;
                       end
    endcase
 
    tms_pad_i<=#1 1;
    gen_clk(2);
    tms_pad_i<=#1 0;
    gen_clk(2);  // we are in shiftIR
 
    for(i=0; i<`IR_LENGTH-1; i=i+1)
    begin
      tdi_pad_i<=#1 instr[i];
      gen_clk(1);
    end
 
    tdi_pad_i<=#1 instr[i]; // last shift
    tms_pad_i<=#1 1;        // going out of shiftIR
    gen_clk(1);
    tdi_pad_i<=#1 'hz;    // tri-state
    gen_clk(1);
    tms_pad_i<=#1 0;
    gen_clk(1);       // we are in RunTestIdle
  end
endtask
 
 
// Reads the ID code
task read_id_code;
  output [31:0] code;
  reg    [31:0] code;
  begin
    $display("(%0t) Task read_id_code", $time);
    tms_pad_i<=#1 1;
    gen_clk(1);
    tms_pad_i<=#1 0;
    gen_clk(2);  // we are in shiftDR
 
    tdi_pad_i<=#1 0;
    gen_clk(31);
 
    tms_pad_i<=#1 1;        // going out of shiftIR
    gen_clk(1);
 
    code = in_data_le;
 
    tdi_pad_i<=#1 'hz; // tri-state
    gen_clk(1);
    tms_pad_i<=#1 0;
    gen_clk(1);       // we are in RunTestIdle
  end
endtask
 
 
// sets the selected scan chain and goes to the RunTestIdle state
task chain_select;
  input [3:0]  data;
  input        gen_crc_err;
  integer i;
 
  begin
    case (data)
      `CPU_DEBUG_CHAIN      : $display("(%0t) Task chain_select (CPU_DEBUG_CHAIN, gen_crc_err=%0d)", $time, gen_crc_err);
      `WISHBONE_DEBUG_CHAIN : $display("(%0t) Task chain_select (WISHBONE_DEBUG_CHAIN, gen_crc_err=%0d)", $time, gen_crc_err);
      default               : $display("(%0t) Task chain_select (ERROR!!! Unknown chain selected)", $time);
    endcase
 
    tms_pad_i<=#1 1;
    gen_clk(1);
    tms_pad_i<=#1 0;
    gen_clk(2);  // we are in shiftDR
 
    crc_out = 32'hffffffff; // Initialize outgoing CRC
    tdi_pad_i<=#1 1'b1; // chain_select bit
    calculate_crc(1'b1);
    gen_clk(1);
 
    for(i=0; i<`CHAIN_ID_LENGTH; i=i+1)
    begin
      tdi_pad_i<=#1 data[i];
      calculate_crc(data[i]);
      gen_clk(1);
    end
 
    for(i=31; i>=0; i=i-1)
    begin
      if (gen_crc_err & (i==0))  // Generate crc error at last crc bit
        tdi_pad_i<=#1 ~crc_out[i];   // error crc
      else
        tdi_pad_i<=#1 crc_out[i];    // ok crc
 
      gen_clk(1);
    end
 
    tdi_pad_i<=#1 'hz;  // tri-state
 
    crc_in = 32'hffffffff;  // Initialize incoming CRC
    gen_clk(`STATUS_LEN);   // Generating 4 clocks to read out status.
 
 
    for(i=0; i<`CRC_LEN -1; i=i+1)
      gen_clk(1);
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to exit1_dr
 
    if (~crc_match_in)
      begin
        $display("(%0t) Incoming CRC failed !!!", $time);
        $stop;
      end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to update_dr
    tms_pad_i<=#1 0;
    gen_clk(1);         // to run_test_idle
  end
endtask   // chain_select
 
 
 
 
task debug_wishbone;
  input [2:0]   command;
  input         ready;
  input [31:0]  addr;
  input [15:0]  length;
  input         gen_crc_err;
  input [99:0]  text;
  integer i;
 
  begin
   $write("(%0t) Task debug_wishbone: ", $time);
 
    test_text = text;
 
    case (command)
      `WB_STATUS   :
        begin
          $display("wb_status (gen_crc_err=%0d (%0s))", gen_crc_err, text);
          debug_wishbone_status(command, gen_crc_err);
          last_wb_cmd = `WB_STATUS;  last_wb_cmd_text = "WB_STATUS";
        end
      `WB_READ8    :
        begin
          $display("wb_read8 (adr=0x%0x, length=0x%0x, gen_crc_err=%0d (%0s))", addr, length, gen_crc_err, text);
          debug_wishbone_set_addr(command, addr, length, gen_crc_err);
          last_wb_cmd = `WB_READ8;  last_wb_cmd_text = "WB_READ8";
        end
      `WB_READ16   :
        begin
          $display("wb_read16 (adr=0x%0x, length=0x%0x, gen_crc_err=%0d (%0s))", addr, length, gen_crc_err, text);
          debug_wishbone_set_addr(command, addr, length, gen_crc_err);
          last_wb_cmd = `WB_READ16;  last_wb_cmd_text = "WB_READ16";
        end
      `WB_READ32   :
        begin
          $display("wb_read32 (adr=0x%0x, length=0x%0x, gen_crc_err=%0d (%0s))", addr, length, gen_crc_err, text);
          debug_wishbone_set_addr(command, addr, length, gen_crc_err);
          last_wb_cmd = `WB_READ32;  last_wb_cmd_text = "WB_READ32";
        end
      `WB_WRITE8   :
        begin
          $display("wb_write8 (adr=0x%0x, length=0x%0x, gen_crc_err=%0d (%0s))", addr, length, gen_crc_err, text);
          debug_wishbone_set_addr(command, addr, length, gen_crc_err);
          last_wb_cmd = `WB_WRITE8;  last_wb_cmd_text = "WB_WRITE8";
        end
      `WB_WRITE16  :
        begin
          $display("wb_write16 (adr=0x%0x, length=0x%0x, gen_crc_err=%0d (%0s))", addr, length, gen_crc_err, text);
          debug_wishbone_set_addr(command, addr, length, gen_crc_err);
          last_wb_cmd = `WB_WRITE16;  last_wb_cmd_text = "WB_WRITE16";
        end
      `WB_WRITE32  :
        begin
          $display("wb_write32 (adr=0x%0x, length=0x%0x, gen_crc_err=%0d (%0s))", addr, length, gen_crc_err, text);
          debug_wishbone_set_addr(command, addr, length, gen_crc_err);
          last_wb_cmd = `WB_WRITE32;  last_wb_cmd_text = "WB_WRITE32";
        end
      `WB_GO       :
        begin
          $display("wb_go, ready=%0d, gen_crc_err=%0d (%0s))", ready, gen_crc_err, text);
          debug_wishbone_go(command, ready, gen_crc_err);
//          $display("wb_go_tmp, gen_crc_err=0x%0x (%0s))", gen_crc_err, text);
//          debug_wishbone_go_tmp(command, crc);
          last_wb_cmd = `WB_GO;  last_wb_cmd_text = "WB_GO";
        end
    endcase
  end
endtask       // debug_wishbone
 
 
 
 
 
 
task debug_wishbone_set_addr;
  input [2:0]   command;
  input [31:0]  addr;
  input [15:0]  length;
  input         gen_crc_err;
  integer i;
 
  begin
    $display("(%0t) Task debug_wishbone_set_addr: ", $time);
 
    tms_pad_i<=#1 1;
    gen_clk(1);
    tms_pad_i<=#1 0;
    gen_clk(2);  // we are in shiftDR
 
    crc_out = 32'hffffffff; // Initialize outgoing CRC
 
    tdi_pad_i<=#1 1'b0; // chain_select bit = 0
    calculate_crc(1'b0);
    gen_clk(1);
 
    for(i=2; i>=0; i=i-1)
    begin
      tdi_pad_i<=#1 command[i]; // command
      calculate_crc(command[i]);
      gen_clk(1);
    end
 
    for(i=31; i>=0; i=i-1)       // address
    begin
      tdi_pad_i<=#1 addr[i];
      calculate_crc(addr[i]);
      gen_clk(1);
    end
 
    for(i=15; i>=0; i=i-1)       // length
    begin
      tdi_pad_i<=#1 length[i];
      calculate_crc(length[i]);
      gen_clk(1);
    end
 
    for(i=31; i>=0; i=i-1)
    begin
      if (gen_crc_err & (i==0))  // Generate crc error at last crc bit
        tdi_pad_i<=#1 ~crc_out[i];   // error crc
      else
        tdi_pad_i<=#1 crc_out[i];    // ok crc
 
      gen_clk(1);
    end
 
    tdi_pad_i<=#1 'hz;
 
    crc_in = 32'hffffffff;  // Initialize incoming CRC
    gen_clk(`STATUS_LEN);   // Generating 4 clocks to read out status.
 
    for(i=0; i<`CRC_LEN -1; i=i+1)  // Getting in the CRC
    begin
      gen_clk(1);
    end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to exit1_dr
 
    if (~crc_match_in)
      begin
        $display("(%0t) Incoming CRC failed !!!", $time);
        $stop;
      end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to update_dr
    tms_pad_i<=#1 0;
    gen_clk(1);         // to run_test_idle
  end
endtask       // debug_wishbone_set_addr
 
 
 
 
 
task debug_wishbone_status;
  input [2:0]   command;
  input         gen_crc_err;
  integer i;
 
  begin
    $display("(%0t) Task debug_wishbone_status: ", $time);
 
    tms_pad_i<=#1 1;
    gen_clk(1);
    tms_pad_i<=#1 0;
    gen_clk(2);  // we are in shiftDR
 
    crc_out = 32'hffffffff; // Initialize outgoing CRC
 
    tdi_pad_i<=#1 1'b0; // chain_select bit = 0
    calculate_crc(1'b0);
    gen_clk(1);
 
    for(i=2; i>=0; i=i-1)
    begin
      tdi_pad_i<=#1 command[i]; // command
      calculate_crc(command[i]);
      gen_clk(1);
    end
 
    for(i=31; i>=0; i=i-1)
    begin
      if (gen_crc_err & (i==0))  // Generate crc error at last crc bit
        tdi_pad_i<=#1 ~crc_out[i];   // error crc
      else
        tdi_pad_i<=#1 crc_out[i];    // ok crc
 
      gen_clk(1);
    end
 
    tdi_pad_i<=#1 1'hz;
 
    crc_in = 32'hffffffff;  // Initialize incoming CRC
 
    gen_clk(`STATUS_LEN);   // Generating 4 clocks to read out status.
 
    for(i=0; i<`CRC_LEN -1; i=i+1)  // Getting in the CRC
    begin
      gen_clk(1);
    end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to exit1_dr
 
    if (~crc_match_in)
      begin
        $display("(%0t) Incoming CRC failed !!!", $time);
        $stop;
      end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to update_dr
    tms_pad_i<=#1 0;
    gen_clk(1);         // to run_test_idle
  end
endtask       // debug_wishbone_status
 
 
 
 
task debug_wishbone_go;
  input [2:0]   command;
  input         wait_for_wb_ready;
  input         gen_crc_err;
  integer i;
  reg   [4:0]   bit_pointer;
  integer       word_pointer;
  reg  [31:0]   tmp_data;
 
  begin
    $display("(%0t) Task debug_wishbone_go (previous command was %0s): ", $time, last_wb_cmd_text);
    word_pointer = 0;
 
    tms_pad_i<=#1 1;
    gen_clk(1);
    tms_pad_i<=#1 0;
    gen_clk(2);  // we are in shiftDR
 
    crc_out = 32'hffffffff; // Initialize outgoing CRC
 
    tdi_pad_i<=#1 1'b0; // chain_select bit = 0
    calculate_crc(1'b0);
    gen_clk(1);
 
    for(i=2; i>=0; i=i-1)
    begin
      tdi_pad_i<=#1 command[i]; // command
      calculate_crc(command[i]);
      gen_clk(1);
    end
 
 
    if ((last_wb_cmd == `WB_WRITE8) | (last_wb_cmd == `WB_WRITE16) | (last_wb_cmd == `WB_WRITE32))  // When WB_WRITEx was previously activated, data needs to be shifted.
      begin
        for (i=0; i<(dbg_tb.i_dbg_top.i_dbg_wb.len << 3); i=i+1)
          begin
            tmp_data = wb_data[word_pointer];
            if ((!(i%32)) && (i>0))
              begin
                word_pointer = word_pointer + 1;
              end
            bit_pointer = 31-i[4:0];
            tdi_pad_i<=#1 tmp_data[bit_pointer];
            calculate_crc(tmp_data[bit_pointer]);
            gen_clk(1);
 
          end
      end
 
    for(i=31; i>=1; i=i-1)
    begin
      tdi_pad_i<=#1 crc_out[i];
      gen_clk(1);
    end
 
    if (gen_crc_err)  // Generate crc error at last crc bit
      tdi_pad_i<=#1 ~crc_out[0];   // error crc
    else
      tdi_pad_i<=#1 crc_out[0];    // ok crc
 
    if (wait_for_wb_ready)
      begin
        tms_pad_i<=#1 1;
        gen_clk(1);       // to exit1_dr. Last CRC is shifted on this clk
        tms_pad_i<=#1 0;
        gen_clk(1);       // to pause_dr
 
        #2;             // wait a bit for tdo to activate
        while (tdo)     // waiting for wb to send "ready"
        begin
          gen_clk(1);       // staying in pause_dr
        end
 
        tms_pad_i<=#1 1;
        gen_clk(1);       // to exit2_dr
        tms_pad_i<=#1 0;
        gen_clk(1);       // to shift_dr
      end
    else
      begin
        gen_clk(1);       // Last CRC is shifted on this clk
      end
 
 
    tdi_pad_i<=#1 1'hz;
    crc_in = 32'hffffffff;  // Initialize incoming CRC
 
    if ((last_wb_cmd == `WB_READ8) | (last_wb_cmd == `WB_READ16) | (last_wb_cmd == `WB_READ32))  // When WB_READx was previously activated, data needs to be shifted.
      begin
        $display("\t\tGenerating %0d clocks to read %0d data bytes.", dbg_tb.i_dbg_top.i_dbg_wb.data_cnt_limit, dbg_tb.i_dbg_top.i_dbg_wb.data_cnt_limit>>3);
        word_pointer = 0; // Reset pointer
        for (i=0; i<(dbg_tb.i_dbg_top.i_dbg_wb.data_cnt_limit); i=i+1)
          begin
            gen_clk(1);
            if (i[4:0] == 31)   // Latching data
              begin
                wb_data[word_pointer] = in_data_be;
                $display("\t\tin_data_be = 0x%x", in_data_be);
                word_pointer = word_pointer + 1;
              end
          end
      end
 
 
    gen_clk(`STATUS_LEN);   // Generating 4 clocks to read out status.
 
    for(i=0; i<`CRC_LEN -1; i=i+1)  // Getting in the CRC
    begin
      gen_clk(1);
    end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to exit1_dr
 
    if (~crc_match_in)
      begin
        $display("(%0t) Incoming CRC failed !!!", $time);
        $stop;
      end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to update_dr
    tms_pad_i<=#1 0;
    gen_clk(1);         // to run_test_idle
  end
endtask       // debug_wishbone_go
 
 
 
 
task debug_cpu;
  input [2:0]   command;
  input [31:0]  addr;
  input [31:0]  data;
  input         gen_crc_err;
  output [31:0] result;
  input [199:0]  text;
  integer i;
 
  begin
   $write("(%0t) Task debug_cpu: ", $time);
 
    test_text = text;
 
    case (command)
//      `WB_STATUS   : 
//        begin
//          $display("wb_status (gen_crc_err=%0d (%0s))", gen_crc_err, text);
//          debug_wishbone_status(command, gen_crc_err);
//          last_wb_cmd = `WB_STATUS;  last_wb_cmd_text = "WB_STATUS";
//        end 
      `CPU_READ_REG   :
        begin
          $display("cpu_read_reg (adr=0x%0x, gen_crc_err=%0d (%0s))", addr, gen_crc_err, text);
          debug_cpu_set_addr(command, addr, gen_crc_err);
          last_wb_cmd = `CPU_READ_REG;  last_wb_cmd_text = "CPU_READ_REG";
        end
      `CPU_WRITE_REG  :
        begin
          $display("cpu_write_reg (adr=0x%0x, gen_crc_err=%0d (%0s))", addr, gen_crc_err, text);
          debug_cpu_set_addr(command, addr, gen_crc_err);
          last_wb_cmd = `CPU_WRITE_REG;  last_wb_cmd_text = "CPU_WRITE_REG";
        end
      `CPU_READ8      :
        begin
          $display("cpu_read8 (adr=0x%0x, gen_crc_err=%0d (%0s))", addr, gen_crc_err, text);
          debug_cpu_set_addr(command, addr, gen_crc_err);
          last_wb_cmd = `CPU_READ8;  last_wb_cmd_text = "CPU_READ8";
        end
      `CPU_READ32     :
        begin
          $display("cpu_read32 (adr=0x%0x, gen_crc_err=%0d (%0s))", addr, gen_crc_err, text);
          debug_cpu_set_addr(command, addr, gen_crc_err);
          last_wb_cmd = `CPU_READ32;  last_wb_cmd_text = "CPU_READ32";
        end
      `CPU_WRITE8     :
        begin
          $display("cpu_write8 (adr=0x%0x, gen_crc_err=%0d (%0s))", addr, gen_crc_err, text);
          debug_cpu_set_addr(command, addr, gen_crc_err);
          last_wb_cmd = `CPU_WRITE8;  last_wb_cmd_text = "CPU_WRITE8";
        end
      `CPU_WRITE32    :
        begin
          $display("cpu_write32 (adr=0x%0x, gen_crc_err=%0d (%0s))", addr, gen_crc_err, text);
          debug_cpu_set_addr(command, addr, gen_crc_err);
          last_wb_cmd = `CPU_WRITE32;  last_wb_cmd_text = "CPU_WRITE32";
        end
      `CPU_GO         :
        begin
          $display("cpu_go, data = 0x%0x, gen_crc_err=%0d (%0s))", data, gen_crc_err, text);
          debug_cpu_go(command, data, gen_crc_err);
          last_wb_cmd = `CPU_GO;  last_wb_cmd_text = "CPU_GO";
        end
      default     :
        begin
          $display("\t\tERROR: Non-existing command while debugging %0s", gen_crc_err, text);
          $stop;
        end
    endcase
  end
endtask       // debug_cpu
 
 
 
task debug_cpu_set_addr;
  input [2:0]   command;
  input [31:0]  addr;
  input         gen_crc_err;
  integer i;
 
  begin
    $display("(%0t) Task debug_cpu_set_addr: ", $time);
 
    tms_pad_i<=#1 1;
    gen_clk(1);
    tms_pad_i<=#1 0;
    gen_clk(2);  // we are in shiftDR
 
    crc_out = 32'hffffffff; // Initialize outgoing CRC
 
    tdi_pad_i<=#1 1'b0; // chain_select bit = 0
    calculate_crc(1'b0);
    gen_clk(1);
 
    for(i=2; i>=0; i=i-1)
    begin
      tdi_pad_i<=#1 command[i]; // command
      calculate_crc(command[i]);
      gen_clk(1);
    end
 
    for(i=31; i>=0; i=i-1)       // address
    begin
      tdi_pad_i<=#1 addr[i];
      calculate_crc(addr[i]);
      gen_clk(1);
    end
 
    for(i=31; i>=0; i=i-1)
    begin
      if (gen_crc_err & (i==0))  // Generate crc error at last crc bit
        tdi_pad_i<=#1 ~crc_out[i];   // error crc
      else
        tdi_pad_i<=#1 crc_out[i];    // ok crc
 
      gen_clk(1);
    end
 
    tdi_pad_i<=#1 'hz;
 
    crc_in = 32'hffffffff;  // Initialize incoming CRC
    gen_clk(`STATUS_LEN);   // Generating 4 clocks to read out status.
 
    for(i=0; i<`CRC_LEN -1; i=i+1)  // Getting in the CRC
    begin
      gen_clk(1);
    end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to exit1_dr
 
    if (~crc_match_in)
      begin
        $display("(%0t) Incoming CRC failed !!!", $time);
        $stop;
      end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to update_dr
    tms_pad_i<=#1 0;
    gen_clk(1);         // to run_test_idle
  end
endtask       // debug_cpu_set_addr
 
 
 
 
task debug_cpu_go;
  input [2:0]   command;
  input [31:0]  data;
  input         gen_crc_err;
  integer i, len;
 
 
  begin
    $display("(%0t) Task debug_cpu_go (previous command was %0s): ", $time, last_wb_cmd_text);
 
    tms_pad_i<=#1 1;
    gen_clk(1);
    tms_pad_i<=#1 0;
    gen_clk(2);  // we are in shiftDR
 
    crc_out = 32'hffffffff; // Initialize outgoing CRC
    tdi_pad_i<=#1 1'b0; // chain_select bit = 0
    calculate_crc(1'b0);
    gen_clk(1);
 
    for(i=2; i>=0; i=i-1)
    begin
      tdi_pad_i<=#1 command[i]; // command
      calculate_crc(command[i]);
      gen_clk(1);
    end
 
 
    if (last_wb_cmd == `CPU_WRITE32)
      begin
        len = 31;
        $display("\t\tdata = 0x%x", data);
      end
    else if ((last_wb_cmd == `CPU_WRITE8) | (last_wb_cmd == `CPU_WRITE_REG))
      begin
        len = 7;
        $display("\t\tdata = 0x%x", data[7:0]);
      end
    else
      len = 0;
 
    if (len>0)  // When CPU_WRITEx was previously activated, data needs to be shifted.
      begin
        for (i=len; i>=0; i=i-1)
          begin
            tdi_pad_i<=#1 data[i];
            calculate_crc(data[i]);
            gen_clk(1);
          end
      end
 
    for(i=31; i>=0; i=i-1)
    begin
      if (gen_crc_err & (i==0))  // Generate crc error at last crc bit
        tdi_pad_i<=#1 ~crc_out[i];   // error crc
      else
        tdi_pad_i<=#1 crc_out[i];    // ok crc
 
      gen_clk(1);
    end
 
    tdi_pad_i<=#1 1'hz;
 
    crc_in = 32'hffffffff;  // Initialize incoming CRC
 
    if (last_wb_cmd == `CPU_READ32)
      len = 32;
    else if ((last_wb_cmd == `CPU_READ8) | (last_wb_cmd == `CPU_READ_REG))
      len = 8;
    else
      len = 0;
 
    if (len>0)    // When CPU_READx was previously activated, data needs to be shifted.
      begin
        $display("\t\tGenerating %0d clocks to read out the data.", len);
        for (i=0; i<len; i=i+1)
          gen_clk(1);
      end
 
 
    gen_clk(`STATUS_LEN);   // Generating 4 clocks to read out status.
 
    for(i=0; i<`CRC_LEN -1; i=i+1)  // Getting in the CRC
    begin
      gen_clk(1);
    end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to exit1_dr
 
    if (~crc_match_in)
      begin
        $display("(%0t) Incoming CRC failed !!!", $time);
        $stop;
      end
 
    tms_pad_i<=#1 1;
    gen_clk(1);         // to update_dr
    tms_pad_i<=#1 0;
    gen_clk(1);         // to run_test_idle
  end
endtask       // debug_cpu_go
 
 
 
always @ (posedge tck_pad_i)
begin
  in_data_be[31:1] <= #1 in_data_be[30:0];
  in_data_be[0]    <= #1 tdo;
 
  in_data_le[31]   <= #1 tdo;
  in_data_le[30:0] <= #1 in_data_le[31:1];
end
 
 
 
// Calculating outgoing CRC
task calculate_crc;
  input data;
 
  begin
    crc_out[0]  <= #1 data          ^ crc_out[31];
    crc_out[1]  <= #1 data          ^ crc_out[0]  ^ crc_out[31];
    crc_out[2]  <= #1 data          ^ crc_out[1]  ^ crc_out[31];
    crc_out[3]  <= #1 crc_out[2];
    crc_out[4]  <= #1 data          ^ crc_out[3]  ^ crc_out[31];
    crc_out[5]  <= #1 data          ^ crc_out[4]  ^ crc_out[31];
    crc_out[6]  <= #1 crc_out[5];
    crc_out[7]  <= #1 data          ^ crc_out[6]  ^ crc_out[31];
    crc_out[8]  <= #1 data          ^ crc_out[7]  ^ crc_out[31];
    crc_out[9]  <= #1 crc_out[8];
    crc_out[10] <= #1 data         ^ crc_out[9]  ^ crc_out[31];
    crc_out[11] <= #1 data         ^ crc_out[10] ^ crc_out[31];
    crc_out[12] <= #1 data         ^ crc_out[11] ^ crc_out[31];
    crc_out[13] <= #1 crc_out[12];
    crc_out[14] <= #1 crc_out[13];
    crc_out[15] <= #1 crc_out[14];
    crc_out[16] <= #1 data         ^ crc_out[15] ^ crc_out[31];
    crc_out[17] <= #1 crc_out[16];
    crc_out[18] <= #1 crc_out[17];
    crc_out[19] <= #1 crc_out[18];
    crc_out[20] <= #1 crc_out[19];
    crc_out[21] <= #1 crc_out[20];
    crc_out[22] <= #1 data         ^ crc_out[21] ^ crc_out[31];
    crc_out[23] <= #1 data         ^ crc_out[22] ^ crc_out[31];
    crc_out[24] <= #1 crc_out[23];
    crc_out[25] <= #1 crc_out[24];
    crc_out[26] <= #1 data         ^ crc_out[25] ^ crc_out[31];
    crc_out[27] <= #1 crc_out[26];
    crc_out[28] <= #1 crc_out[27];
    crc_out[29] <= #1 crc_out[28];
    crc_out[30] <= #1 crc_out[29];
    crc_out[31] <= #1 crc_out[30];
  end
endtask // calculate_crc
 
 
// Calculating and checking input CRC
always @(posedge tck_pad_i)
begin
  crc_in[0]  <= #1 tdo           ^ crc_in[31];
  crc_in[1]  <= #1 tdo           ^ crc_in[0]  ^ crc_in[31];
  crc_in[2]  <= #1 tdo           ^ crc_in[1]  ^ crc_in[31];
  crc_in[3]  <= #1 crc_in[2];
  crc_in[4]  <= #1 tdo           ^ crc_in[3]  ^ crc_in[31];
  crc_in[5]  <= #1 tdo           ^ crc_in[4]  ^ crc_in[31];
  crc_in[6]  <= #1 crc_in[5];
  crc_in[7]  <= #1 tdo           ^ crc_in[6]  ^ crc_in[31];
  crc_in[8]  <= #1 tdo           ^ crc_in[7]  ^ crc_in[31];
  crc_in[9]  <= #1 crc_in[8];
  crc_in[10] <= #1 tdo          ^ crc_in[9]  ^ crc_in[31];
  crc_in[11] <= #1 tdo          ^ crc_in[10] ^ crc_in[31];
  crc_in[12] <= #1 tdo          ^ crc_in[11] ^ crc_in[31];
  crc_in[13] <= #1 crc_in[12];
  crc_in[14] <= #1 crc_in[13];
  crc_in[15] <= #1 crc_in[14];
  crc_in[16] <= #1 tdo          ^ crc_in[15] ^ crc_in[31];
  crc_in[17] <= #1 crc_in[16];
  crc_in[18] <= #1 crc_in[17];
  crc_in[19] <= #1 crc_in[18];
  crc_in[20] <= #1 crc_in[19];
  crc_in[21] <= #1 crc_in[20];
  crc_in[22] <= #1 tdo          ^ crc_in[21] ^ crc_in[31];
  crc_in[23] <= #1 tdo          ^ crc_in[22] ^ crc_in[31];
  crc_in[24] <= #1 crc_in[23];
  crc_in[25] <= #1 crc_in[24];
  crc_in[26] <= #1 tdo          ^ crc_in[25] ^ crc_in[31];
  crc_in[27] <= #1 crc_in[26];
  crc_in[28] <= #1 crc_in[27];
  crc_in[29] <= #1 crc_in[28];
  crc_in[30] <= #1 crc_in[29];
  crc_in[31] <= #1 crc_in[30];
end
 
assign crc_match_in = crc_in == 32'h0;
 
 
 
/**********************************************************************************
*                                                                                 *
*   Printing the information to the screen                                        *
*                                                                                 *
**********************************************************************************/
 
always @ (posedge tck_pad_i)
begin
  if(dbg_tb.i_tap_top.update_ir)
    case(dbg_tb.i_tap_top.jtag_ir[`IR_LENGTH-1:0])
      `EXTEST         : $display("\tInstruction EXTEST entered");
      `SAMPLE_PRELOAD : $display("\tInstruction SAMPLE_PRELOAD entered");
      `IDCODE         : $display("\tInstruction IDCODE entered");
      `MBIST          : $display("\tInstruction MBIST entered");
      `DEBUG          : $display("\tInstruction DEBUG entered");
      `BYPASS         : $display("\tInstruction BYPASS entered");
                default           :     $display("\n\tInstruction not valid. Instruction BYPASS activated !!!");
    endcase
end
 
 
 
// We never use following states: exit2_ir,  exit2_dr,  pause_ir or pause_dr
always @ (posedge tck_pad_i)
begin
  if(dbg_tb.i_tap_top.pause_ir | dbg_tb.i_tap_top.exit2_ir)
    begin
      $display("\n(%0t) ERROR: State pause_ir or exit2_ir detected.", $time);
      $display("(%0t) Simulation stopped !!!", $time);
      $stop;
    end
end
 
 
 
 
// Detecting CRC error
always @ (posedge dbg_tb.i_dbg_top.i_dbg_wb.crc_cnt_end or posedge dbg_tb.i_dbg_top.chain_latch_en or posedge dbg_tb.i_dbg_top.i_dbg_cpu.crc_cnt_end)
begin
  #2;
  if (~dbg_tb.i_dbg_top.crc_match)
    begin
      $display("\t\tCRC ERROR !!!");
      $stop;
    end
end
 
 
 
// Detecting errors in counters
always @ (dbg_tb.i_dbg_top.i_dbg_wb.cmd_cnt or
          dbg_tb.i_dbg_top.i_dbg_wb.cmd_cnt_end or
          dbg_tb.i_dbg_top.i_dbg_wb.addr_len_cnt or
          dbg_tb.i_dbg_top.i_dbg_wb.addr_len_cnt_end or
          dbg_tb.i_dbg_top.i_dbg_wb.data_cnt or
          dbg_tb.i_dbg_top.i_dbg_wb.data_cnt_end or
          dbg_tb.i_dbg_top.i_dbg_wb.cmd_cnt_en or
          dbg_tb.i_dbg_top.i_dbg_wb.addr_len_cnt_en or
          dbg_tb.i_dbg_top.i_dbg_wb.data_cnt_en or
          dbg_tb.i_dbg_top.i_dbg_wb.crc_cnt_en or
          dbg_tb.i_dbg_top.i_dbg_wb.status_cnt1
          //dbg_tb.i_dbg_top.i_dbg_wb.status_cnt2 or
          //dbg_tb.i_dbg_top.i_dbg_wb.status_cnt3 or
          //dbg_tb.i_dbg_top.i_dbg_wb.status_cnt4
          // dbg_tb.i_dbg_top.i_dbg_wb. or
         )
begin
  if ((~dbg_tb.i_dbg_top.i_dbg_wb.cmd_cnt_end) & (
                                                  dbg_tb.i_dbg_top.i_dbg_wb.addr_len_cnt_en |
                                                  dbg_tb.i_dbg_top.i_dbg_wb.data_cnt_en     |
                                                  dbg_tb.i_dbg_top.i_dbg_wb.crc_cnt_en      |
                                                  dbg_tb.i_dbg_top.i_dbg_wb.status_cnt1
                                                 )
     )
    begin
      $display("\n\n\t\t(%0t) ERROR in counters !!!", $time);
      #10000;
      $stop;
    end
 
 
 
end
 
 
 
 
 
 
endmodule // dbg_tb
 
 

Line No.	Rev	Author	Line
1	2	mohor	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// dbg_tb.v ////`
4			`//// ////`
5			`//// ////`
6			`//// This file is part of the SoC/OpenRISC Development Interface ////`
7	36	mohor	`//// http://www.opencores.org/projects/DebugInterface/ ////`
8	2	mohor	`//// ////`
9			`//// Author(s): ////`
10	80	mohor	`//// Igor Mohor (igorm@opencores.org) ////`
11	2	mohor	`//// ////`
12			`//// ////`
13			`//// All additional information is avaliable in the README.txt ////`
14			`//// file. ////`
15			`//// ////`
16			`//////////////////////////////////////////////////////////////////////`
17			`//// ////`
18	101	mohor	`//// Copyright (C) 2000 - 2004 Authors ////`
19	2	mohor	`//// ////`
20			`//// This source file may be used and distributed without ////`
21			`//// restriction provided that this copyright statement is not ////`
22			`//// removed from the file and that any derivative work contains ////`
23			`//// the original copyright notice and the associated disclaimer. ////`
24			`//// ////`
25			`//// This source file is free software; you can redistribute it ////`
26			`//// and/or modify it under the terms of the GNU Lesser General ////`
27			`//// Public License as published by the Free Software Foundation; ////`
28			`//// either version 2.1 of the License, or (at your option) any ////`
29			`//// later version. ////`
30			`//// ////`
31			`//// This source is distributed in the hope that it will be ////`
32			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
33			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
34			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
35			`//// details. ////`
36			`//// ////`
37			`//// You should have received a copy of the GNU Lesser General ////`
38			`//// Public License along with this source; if not, download it ////`
39			`//// from http://www.opencores.org/lgpl.shtml ////`
40			`//// ////`
41			`//////////////////////////////////////////////////////////////////////`
42			`//`
43			`// CVS Revision History`
44			`//`
45			`// $Log: not supported by cvs2svn $`
46	121	mohor	`// Revision 1.35 2004/01/22 11:07:28 mohor`
47			`// test stall_test added.`
48			`//`
49	120	mohor	`// Revision 1.34 2004/01/20 14:24:08 mohor`
50			`// Define name changed.`
51			`//`
52	117	mohor	`// Revision 1.33 2004/01/20 14:05:26 mohor`
53			`// Data latching changed when testing WB.`
54			`//`
55	116	mohor	`// Revision 1.32 2004/01/20 10:23:21 mohor`
56			`// More debug data added.`
57			`//`
58	115	mohor	`// Revision 1.31 2004/01/20 09:07:44 mohor`
59			`// CRC generation iand verification in bench changed.`
60			`//`
61	114	mohor	`// Revision 1.30 2004/01/20 08:03:35 mohor`
62			`// IDCODE test improved.`
63			`//`
64	113	mohor	`// Revision 1.29 2004/01/19 13:13:18 mohor`
65			`// Define tap_defines.v added to test bench.`
66			`//`
67	111	mohor	`// Revision 1.28 2004/01/19 12:38:10 mohor`
68			`// Waiting for "ready" improved.`
69			`//`
70	110	mohor	`// Revision 1.27 2004/01/17 18:01:31 mohor`
71			`// New version.`
72			`//`
73	102	mohor	`// Revision 1.26 2004/01/17 17:01:25 mohor`
74			`// Almost finished.`
75			`//`
76	101	mohor	`// Revision 1.25 2004/01/16 14:51:24 mohor`
77			`// cpu registers added.`
78			`//`
79	99	mohor	`// Revision 1.24 2004/01/15 10:47:13 mohor`
80			`// Working.`
81			`//`
82	96	mohor	`// Revision 1.23 2004/01/14 22:59:01 mohor`
83			`// Temp version.`
84			`//`
85	95	mohor	`// Revision 1.22 2004/01/13 11:28:30 mohor`
86			`// tmp version.`
87			`//`
88	93	mohor	`// Revision 1.21 2004/01/10 07:50:41 mohor`
89			`// temp version.`
90			`//`
91	92	mohor	`// Revision 1.20 2004/01/09 12:49:23 mohor`
92			`// tmp version.`
93			`//`
94	91	mohor	`// Revision 1.19 2004/01/08 17:53:12 mohor`
95			`// tmp version.`
96			`//`
97	90	mohor	`// Revision 1.18 2004/01/07 11:59:48 mohor`
98			`// temp4 version.`
99			`//`
100	89	mohor	`// Revision 1.17 2004/01/06 17:14:59 mohor`
101			`// temp3 version.`
102			`//`
103	88	mohor	`// Revision 1.16 2004/01/05 12:16:50 mohor`
104			`// tmp2 version.`
105			`//`
106	87	mohor	`// Revision 1.15 2003/12/23 14:26:01 mohor`
107			`// New version of the debug interface. Not finished, yet.`
108			`//`
109	80	mohor	`// Revision 1.14 2003/10/23 16:16:30 mohor`
110			`// CRC logic changed.`
111			`//`
112	73	mohor	`// Revision 1.13 2003/08/28 13:54:33 simons`
113			`// Three more chains added for cpu debug access.`
114			`//`
115	63	simons	`// Revision 1.12 2002/05/07 14:44:52 mohor`
116			`// mon_cntl_o signals that controls monitor mux added.`
117			`//`
118	47	mohor	`// Revision 1.11 2002/03/12 14:32:26 mohor`
119			`// Few outputs for boundary scan chain added.`
120			`//`
121	38	mohor	`// Revision 1.10 2002/03/08 15:27:08 mohor`
122			`// Structure changed. Hooks for jtag chain added.`
123			`//`
124	36	mohor	`// Revision 1.9 2001/10/19 11:39:20 mohor`
125			`// dbg_timescale.v changed to timescale.v This is done for the simulation of`
126			`// few different cores in a single project.`
127			`//`
128	17	mohor	`// Revision 1.8 2001/10/17 10:39:17 mohor`
129			`// bs_chain_o added.`
130			`//`
131	15	mohor	`// Revision 1.7 2001/10/16 10:10:18 mohor`
132			`// Signal names changed to lowercase.`
133			`//`
134	13	mohor	`// Revision 1.6 2001/10/15 09:52:50 mohor`
135			`// Wishbone interface added, few fixes for better performance,`
136			`// hooks for boundary scan testing added.`
137			`//`
138	12	mohor	`// Revision 1.5 2001/09/24 14:06:12 mohor`
139			`// Changes connected to the OpenRISC access (SPR read, SPR write).`
140			`//`
141	11	mohor	`// Revision 1.4 2001/09/20 10:10:29 mohor`
142			`// Working version. Few bugs fixed, comments added.`
143			`//`
144	9	mohor	`// Revision 1.3 2001/09/19 11:54:03 mohor`
145			`// Minor changes for simulation.`
146			`//`
147	6	mohor	`// Revision 1.2 2001/09/18 14:12:43 mohor`
148			`// Trace fixed. Some registers changed, trace simplified.`
149			`//`
150	5	mohor	`// Revision 1.1.1.1 2001/09/13 13:49:19 mohor`
151			`// Initial official release.`
152			`//`
153	2	mohor	`// Revision 1.3 2001/06/01 22:23:40 mohor`
154			`// This is a backup. It is not a fully working version. Not for use, yet.`
155			`//`
156			`// Revision 1.2 2001/05/18 13:10:05 mohor`
157			`// Headers changed. All additional information is now avaliable in the README.txt file.`
158			`//`
159			`// Revision 1.1.1.1 2001/05/18 06:35:15 mohor`
160			`// Initial release`
161			`//`
162			`//`
163
164
165	17	mohor	`include "timescale.v"
166	111	mohor	`include "tap_defines.v"
167	2	mohor	`include "dbg_defines.v"
168	80	mohor	`include "dbg_wb_defines.v"
169	99	mohor	`include "dbg_cpu_defines.v"
170	2	mohor
171			`// Test bench`
172			`module dbg_tb;`
173
174	80	mohor	`parameter TCLK = 50; // Clock half period (Clok period = 100 ns => 10 MHz)`
175	2	mohor
176	80	mohor	`reg tms_pad_i;`
177			`reg tck_pad_i;`
178			`reg trst_pad_i;`
179			`reg tdi_pad_i;`
180			`wire tdo_pad_o;`
181			`wire tdo_padoe_o;`
182	2	mohor
183	80	mohor	`wire shift_dr_o;`
184			`wire pause_dr_o;`
185			`wire update_dr_o;`
186	102	mohor	`wire capture_dr_o;`
187	2	mohor
188	80	mohor	`wire extest_select_o;`
189			`wire sample_preload_select_o;`
190			`wire mbist_select_o;`
191			`wire debug_select_o;`
192	2	mohor
193	80	mohor	`// WISHBONE common signals`
194			`reg wb_rst_i;`
195			`reg wb_clk_i;`
196
197			`// WISHBONE master interface`
198			`wire [31:0] wb_adr_o;`
199			`wire [31:0] wb_dat_o;`
200			`wire [31:0] wb_dat_i;`
201			`wire wb_cyc_o;`
202			`wire wb_stb_o;`
203			`wire [3:0] wb_sel_o;`
204			`wire wb_we_o;`
205			`wire wb_ack_i;`
206			`wire wb_cab_o;`
207			`wire wb_err_i;`
208			`wire [2:0] wb_cti_o;`
209			`wire [1:0] wb_bte_o;`
210	2	mohor
211	101	mohor	`// CPU signals`
212			`wire cpu_clk_i;`
213			`wire [31:0] cpu_addr_o;`
214			`wire [31:0] cpu_data_i;`
215			`wire [31:0] cpu_data_o;`
216			`wire cpu_bp_i;`
217			`wire cpu_stall_o;`
218			`wire cpu_stall_all_o;`
219			`wire cpu_stb_o;`
220			wire [`CPU_NUM -1:0] cpu_sel_o;
221			`wire cpu_we_o;`
222			`wire cpu_ack_i;`
223			`wire cpu_rst_o;`
224
225	87	mohor	`// Text used for easier debugging`
226	99	mohor	`reg [199:0] test_text;`
227	88	mohor	`reg [2:0] last_wb_cmd;`
228	99	mohor	`reg [199:0] last_wb_cmd_text;`
229	2	mohor
230	116	mohor	`reg [31:0] wb_data [0:4095]; // Data that is written to (read from) wishbone is stored here.`
231	2	mohor
232	12	mohor
233	116	mohor
234	80	mohor	`wire tdo_o;`
235	12	mohor
236	80	mohor	`wire debug_tdi_i;`
237			`wire bs_chain_tdi_i;`
238			`wire mbist_tdi_i;`
239	73	mohor
240	80	mohor	`reg test_enabled;`
241	73	mohor
242	80	mohor	`reg [31:0] result;`
243	113	mohor	`reg [31:0] in_data_le, in_data_be;`
244			`reg [31:0] id;`
245	88	mohor
246	110	mohor	`wire crc_match_in;`
247	114	mohor	`reg [31:0] crc_in;`
248			`reg [31:0] crc_out;`
249	99	mohor
250
251	80	mohor	`wire tdo;`
252	73	mohor
253	80	mohor	`assign tdo = tdo_padoe_o? tdo_pad_o : 1'hz;`
254	73	mohor
255	80	mohor	`// Connecting TAP module`
256			`tap_top i_tap_top (`
257	101	mohor	`.tms_pad_i (tms_pad_i),`
258			`.tck_pad_i (tck_pad_i),`
259			`.trst_pad_i (!trst_pad_i),`
260			`.tdi_pad_i (tdi_pad_i),`
261			`.tdo_pad_o (tdo_pad_o),`
262			`.tdo_padoe_o (tdo_padoe_o),`
263	38	mohor
264	80	mohor	`// TAP states`
265	101	mohor	`.shift_dr_o (shift_dr_o),`
266			`.pause_dr_o (pause_dr_o),`
267			`.update_dr_o (update_dr_o),`
268	102	mohor	`.capture_dr_o (capture_dr_o),`
269	38	mohor
270	80	mohor	`// Select signals for boundary scan or mbist`
271	101	mohor	`.extest_select_o (extest_select_o),`
272	80	mohor	`.sample_preload_select_o(sample_preload_select_o),`
273	101	mohor	`.mbist_select_o (mbist_select_o),`
274			`.debug_select_o (debug_select_o),`
275	2	mohor
276	80	mohor	`// TDO signal that is connected to TDI of sub-modules.`
277	101	mohor	`.tdo_o (tdo_o),`
278	38	mohor
279	80	mohor	`// TDI signals from sub-modules`
280	101	mohor	`.debug_tdi_i (debug_tdi_i), // from debug module`
281			`.bs_chain_tdi_i (bs_chain_tdi_i), // from Boundary Scan Chain`
282			`.mbist_tdi_i (mbist_tdi_i) // from Mbist Chain`
283	73	mohor
284	38	mohor	`);`
285	2	mohor
286
287	99	mohor	`// Connecting debug top module`
288	80	mohor	`dbg_top i_dbg_top (`
289	101	mohor	`.tck_i (tck_pad_i),`
290			`.tdi_i (tdo_o),`
291			`.tdo_o (debug_tdi_i),`
292	80	mohor
293			`// TAP states`
294	101	mohor	`.shift_dr_i (shift_dr_o),`
295			`.pause_dr_i (pause_dr_o),`
296			`.update_dr_i (update_dr_o),`
297	80	mohor
298			`// Instructions`
299	101	mohor	`.debug_select_i (debug_select_o),`
300	12	mohor
301	80	mohor	`// WISHBONE common signals`
302	101	mohor	`.wb_rst_i (wb_rst_i),`
303			`.wb_clk_i (wb_clk_i),`
304	80	mohor
305			`// WISHBONE master interface`
306	101	mohor	`.wb_adr_o (wb_adr_o),`
307			`.wb_dat_o (wb_dat_o),`
308			`.wb_dat_i (wb_dat_i),`
309			`.wb_cyc_o (wb_cyc_o),`
310			`.wb_stb_o (wb_stb_o),`
311			`.wb_sel_o (wb_sel_o),`
312			`.wb_we_o (wb_we_o),`
313			`.wb_ack_i (wb_ack_i),`
314			`.wb_cab_o (wb_cab_o),`
315			`.wb_err_i (wb_err_i),`
316			`.wb_cti_o (wb_cti_o),`
317			`.wb_bte_o (wb_bte_o),`
318
319			`// CPU signals`
320			`.cpu_clk_i (cpu_clk_i),`
321			`.cpu_addr_o (cpu_addr_o),`
322			`.cpu_data_i (cpu_data_i),`
323			`.cpu_data_o (cpu_data_o),`
324			`.cpu_bp_i (cpu_bp_i),`
325			`.cpu_stall_o (cpu_stall_o),`
326			`.cpu_stall_all_o (cpu_stall_all_o),`
327			`.cpu_stb_o (cpu_stb_o),`
328			`.cpu_sel_o (cpu_sel_o),`
329			`.cpu_we_o (cpu_we_o),`
330			`.cpu_ack_i (cpu_ack_i),`
331			`.cpu_rst_o (cpu_rst_o)`
332
333
334
335
336	80	mohor	`);`
337	12	mohor
338
339	99	mohor
340	80	mohor	`wb_slave_behavioral wb_slave`
341			`(`
342	101	mohor	`.CLK_I (wb_clk_i),`
343			`.RST_I (wb_rst_i),`
344			`.ACK_O (wb_ack_i),`
345			`.ADR_I (wb_adr_o),`
346			`.CYC_I (wb_cyc_o),`
347			`.DAT_O (wb_dat_i),`
348			`.DAT_I (wb_dat_o),`
349			`.ERR_O (wb_err_i),`
350			`.RTY_O (), // NOT USED for now!`
351			`.SEL_I (wb_sel_o),`
352			`.STB_I (wb_stb_o),`
353			`.WE_I (wb_we_o),`
354			`.CAB_I (1'b0)`
355	80	mohor	`);`
356	2	mohor
357
358	101	mohor
359			`cpu_behavioral i_cpu_behavioral`
360			`(`
361			`// CPU signals`
362			`.cpu_rst_i (wb_rst_i),`
363			`.cpu_clk_o (cpu_clk_i),`
364			`.cpu_addr_i (cpu_addr_o),`
365			`.cpu_data_o (cpu_data_i),`
366			`.cpu_data_i (cpu_data_o),`
367			`.cpu_bp_o (cpu_bp_i),`
368			`.cpu_stall_i (cpu_stall_o),`
369			`.cpu_stall_all_i (cpu_stall_all_o),`
370			`.cpu_stb_i (cpu_stb_o),`
371			`.cpu_sel_i (cpu_sel_o),`
372			`.cpu_we_i (cpu_we_o),`
373			`.cpu_ack_o (cpu_ack_i),`
374			`.cpu_rst_o (cpu_rst_o)`
375			`);`
376
377
378
379
380	80	mohor	`// Initial values`
381	2	mohor	`initial`
382			`begin`
383	80	mohor	`trst_pad_i = 1'b1;`
384			`tms_pad_i = 1'hz;`
385			`tck_pad_i = 1'hz;`
386			`tdi_pad_i = 1'hz;`
387
388			`#100;`
389			`trst_pad_i = 1'b0;`
390			`#100;`
391			`trst_pad_i = 1'b1;`
392	2	mohor	`end`
393
394	80	mohor	`initial`
395			`begin`
396	120	mohor	`test_enabled = 1'b0;`
397	80	mohor	`wb_rst_i = 1'b0;`
398			`#1000;`
399			`wb_rst_i = 1'b1;`
400			`#1000;`
401			`wb_rst_i = 1'b0;`
402	2	mohor
403	80	mohor	`// Initial values for wishbone slave model`
404	96	mohor	wb_slave.cycle_response(`ACK_RESPONSE, 9'h55, 8'h2); // (`ACK_RESPONSE, wbs_waits, wbs_retries);
405	120	mohor	`#1 test_enabled<=#1 1'b1;`
406	80	mohor	`end`
407
408			`initial`
409	2	mohor	`begin`
410	80	mohor	`wb_clk_i = 1'b0;`
411			`forever #5 wb_clk_i = ~wb_clk_i;`
412	2	mohor	`end`
413
414	80	mohor	`always @ (posedge test_enabled)`
415			`begin`
416	2	mohor
417	80	mohor	`$display("//////////////////////////////////////////////////////////////////");`
418			`$display("// //");`
419			`$display("// (%0t) dbg_tb starting //", $time);`
420			`$display("// //");`
421			`$display("//////////////////////////////////////////////////////////////////");`
422	2	mohor
423	80	mohor	`initialize_memory(32'h12340000, 32'h00100000); // Initialize 0x100000 bytes starting from address 0x12340000`
424	2	mohor
425	80	mohor	`reset_tap;`
426	95	mohor
427			`#500;`
428	80	mohor	`goto_run_test_idle;`
429	12	mohor
430	120	mohor	`// Test stall signal`
431			`stall_test;`
432
433	80	mohor	`// Testing read and write to internal registers`
434			`#10000;`
435	111	mohor
436	116	mohor	set_instruction(`IDCODE);
437	113	mohor	`read_id_code(id);`
438	12	mohor
439	113	mohor	`$display("\tRead ID = 0x%0x", id);`
440			$display("\tExpected ID = 0x%0x", `IDCODE_VALUE);
441
442	80	mohor	set_instruction(`DEBUG);
443			`#10000;`
444	2	mohor
445	117	mohor	chain_select(`WISHBONE_DEBUG_CHAIN, 1'b0); // {chain, gen_crc_err}
446	12	mohor
447	80	mohor	`// #10000;`
448			`// xxx(4'b1001, 32'he579b242);`
449	12	mohor
450	80	mohor	`#10000;`
451	2	mohor
452	116	mohor	// debug_wishbone(`WB_READ8, 1'b0, 32'h12345678, 16'h4, 1'b0, "abc 1"); // {command, ready, addr, length, gen_crc_err, text}
453			// debug_wishbone(`WB_READ8, 1'b0, 32'h12345679, 16'h4, 1'b0, "abc 2"); // {command, ready, addr, length, gen_crc_err, text}
454			// debug_wishbone(`WB_READ8, 1'b0, 32'h1234567a, 16'h4, 1'b0, "abc 3"); // {command, ready, addr, length, gen_crc_err, text}
455	88	mohor	`//`
456	116	mohor	// debug_wishbone(`WB_READ16, 1'b0, 32'h12345678, 16'h4, 1'b0, "abc 4"); // {command, ready, addr, length, gen_crc_err, text}
457			// debug_wishbone(`WB_READ16, 1'b0, 32'h1234567a, 16'h4, 1'b0, "abc 5"); // {command, ready, addr, length, gen_crc_err, text}
458	88	mohor	`//`
459	116	mohor	debug_wishbone(`WB_READ32, 1'b0, 32'h12345678, 16'h4, 1'b0, "read32 1"); // {command, ready, addr, length, gen_crc_err, text}
460	88	mohor	`//`
461	116	mohor	// debug_wishbone(`WB_READ16, 1'b0, 32'h12345679, 16'h4, 1'b0, "abc 6"); // {command, ready, addr, length, gen_crc_err, text}
462	2	mohor
463	80	mohor	`#10000;`
464			`// xxx(4'b1001, 32'he579b242);`
465
466	116	mohor	debug_wishbone(`WB_READ32, 1'b1, 32'h12345678, 16'h4, 1'b0, "read32 2"); // {command, ready, addr, length, gen_crc_err, text}
467	87	mohor
468			`#10000;`
469	96	mohor	wb_slave.cycle_response(`ACK_RESPONSE, 9'h55, 8'h2); // (`ACK_RESPONSE, wbs_waits, wbs_retries);
470	116	mohor	debug_wishbone(`WB_READ32, 1'b1, 32'h12346668, 16'h4, 1'b0, "read32 3"); // {command, ready, addr, length, gen_crc_err, text}
471	80	mohor
472			`#10000;`
473	96	mohor	wb_slave.cycle_response(`ERR_RESPONSE, 9'h03, 8'h2); // (`ERR_RESPONSE, wbs_waits, wbs_retries);
474	116	mohor	debug_wishbone(`WB_READ32, 1'b1, 32'h12346668, 16'h4, 1'b0, "read32 4"); // {command, ready, addr, length, gen_crc_err, text}
475	80	mohor
476			`#10000;`
477	116	mohor	debug_wishbone(`WB_STATUS, 1'b0, 32'h0, 16'h0, 1'b0, "status 1"); // {command, ready, addr, length, gen_crc_err, text}
478	80	mohor
479	87	mohor	`#10000;`
480	116	mohor	debug_wishbone(`WB_STATUS, 1'b0, 32'h0, 16'h0, 1'b0, "status 2"); // {command, ready, addr, length, gen_crc_err, text}
481	80	mohor
482	87	mohor	`#10000;`
483	96	mohor	wb_slave.cycle_response(`ACK_RESPONSE, 9'h012, 8'h2); // (`ACK_RESPONSE, wbs_waits, wbs_retries);
484	116	mohor	debug_wishbone(`WB_READ32, 1'b1, 32'h12347778, 16'hc, 1'b0, "read32 5"); // {command, ready, addr, length, gen_crc_err, text}
485	80	mohor
486	87	mohor	`#10000;`
487	116	mohor	debug_wishbone(`WB_WRITE32, 1'b0, 32'h12346668, 16'h8, 1'b0, "wr32 len8"); // {command, ready, addr, length, gen_crc_err, text}
488	87	mohor
489			`#10000;`
490	116	mohor	debug_wishbone(`WB_WRITE16, 1'b0, 32'h12344446, 16'h8, 1'b0, "wr16 len8"); // {command, ready, addr, length, gen_crc_err, text}
491	87	mohor
492	88	mohor	`#10000;`
493	116	mohor	debug_wishbone(`WB_WRITE8, 1'b0, 32'h1234010e, 16'h8, 1'b0, "wr8 len8"); // {command, ready, addr, length, gen_crc_err, text}
494	87	mohor
495	88	mohor	`#10000;`
496	116	mohor	debug_wishbone(`WB_GO, 1'b0, 32'h0, 16'h0, 1'b0, "go 1"); // {command, ready, addr, length, gen_crc_err, text}
497	87	mohor
498	89	mohor	`#10000;`
499	116	mohor	debug_wishbone(`WB_READ32, 1'b1, 32'h12340100, 16'hc, 1'b0, "read32 6"); // {command, ready, addr, length, gen_crc_err, text}
500			// debug_wishbone(`WB_READ32, 1'b1, 32'h12340100, 16'hfffc, 1'b0, "read32 6"); // {command, ready, addr, length, gen_crc_err, text}

Browse

Tools

Subversion Repositories dbg_interface

[/] [dbg_interface/] [trunk/] [bench/] [verilog/] [dbg_tb.v] - Blame information for rev 121