Subversion Repositories dbg_interface

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  dbg_top.v                                                   ////

////                                                              ////

////                                                              ////

////  This file is part of the SoC Debug Interface.               ////

////  http://www.opencores.org/projects/DebugInterface/           ////

////                                                              ////

////  Author(s):                                                  ////

////       Igor Mohor (igorm@opencores.org)                       ////

////                                                              ////

////                                                              ////

////  All additional information is avaliable in the README.txt   ////

////  file.                                                       ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2000 - 2004 Authors                            ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.43  2004/03/22 16:35:46  igorm

// Temp version before changing dbg interface.

//

// Revision 1.42  2004/01/30 10:24:31  mohor

// Defines WISHBONE_SUPPORTED and CPU_SUPPORTED added. By default both are

// turned on.

//

// Revision 1.41  2004/01/25 14:04:18  mohor

// All flipflops are reset.

//

// Revision 1.40  2004/01/20 14:23:47  mohor

// Define name changed.

//

// Revision 1.39  2004/01/19 07:32:41  simons

// Reset values width added because of FV, a good sentence changed because some tools can not handle it.

//

// Revision 1.38  2004/01/18 09:22:47  simons

// Sensitivity list updated.

//

// Revision 1.37  2004/01/17 17:01:14  mohor

// Almost finished.

//

// Revision 1.36  2004/01/16 14:51:33  mohor

// cpu registers added.

//

// Revision 1.35  2004/01/14 22:59:16  mohor

// Temp version.

//

// Revision 1.34  2003/12/23 15:07:34  mohor

// New directory structure. New version of the debug interface.

// Files that are not needed removed.

//

// Revision 1.33  2003/10/23 16:17:01  mohor

// CRC logic changed.

//

// Revision 1.32  2003/09/18 14:00:47  simons

// Lower two address lines must be always zero.

//

// Revision 1.31  2003/09/17 14:38:57  simons

// WB_CNTL register added, some syncronization fixes.

//

// Revision 1.30  2003/08/28 13:55:22  simons

// Three more chains added for cpu debug access.

//

// Revision 1.29  2003/07/31 12:19:49  simons

// Multiple cpu support added.

//

// Revision 1.28  2002/11/06 14:22:41  mohor

// Trst signal is not inverted here any more. Inverted on higher layer !!!.

//

// Revision 1.27  2002/10/10 02:42:55  mohor

// WISHBONE Scan Chain is changed to reflect state of the WISHBONE access (WBInProgress bit added). 

// Internal counter is used (counts 256 wb_clk cycles) and when counter exceeds that value, 

// wb_cyc_o is negated.

//

// Revision 1.26  2002/05/07 14:43:59  mohor

// mon_cntl_o signals that controls monitor mux added.

//

// Revision 1.25  2002/04/22 12:54:11  mohor

// Signal names changed to lower case.

//

// Revision 1.24  2002/04/17 13:17:01  mohor

// Intentional error removed.

//

// Revision 1.23  2002/04/17 11:16:33  mohor

// A block for checking possible simulation/synthesis missmatch added.

//

// Revision 1.22  2002/03/12 10:31:53  mohor

// tap_top and dbg_top modules are put into two separate modules. tap_top

// contains only tap state machine and related logic. dbg_top contains all

// logic necessery for debugging.

//

// Revision 1.21  2002/03/08 15:28:16  mohor

// Structure changed. Hooks for jtag chain added.

//

// Revision 1.20  2002/02/06 12:23:09  mohor

// latched_jtag_ir used when muxing TDO instead of JTAG_IR.

//

// Revision 1.19  2002/02/05 13:34:51  mohor

// Stupid bug that was entered by previous update fixed.

//

// Revision 1.18  2002/02/05 12:41:01  mohor

// trst synchronization is not needed and was removed.

//

// Revision 1.17  2002/01/25 07:58:35  mohor

// IDCODE bug fixed, chains reused to decreas size of core. Data is shifted-in

// not filled-in. Tested in hw.

//

// Revision 1.16  2001/12/20 11:17:26  mohor

// TDO and TDO Enable signal are separated into two signals.

//

// Revision 1.15  2001/12/05 13:28:21  mohor

// trst signal is synchronized to wb_clk_i.

//

// Revision 1.14  2001/11/28 09:36:15  mohor

// Register length fixed.

//

// Revision 1.13  2001/11/27 13:37:43  mohor

// CRC is returned when chain selection data is transmitted.

//

// Revision 1.12  2001/11/26 10:47:09  mohor

// Crc generation is different for read or write commands. Small synthesys fixes.

//

// Revision 1.11  2001/11/14 10:10:41  mohor

// Wishbone data latched on wb_clk_i instead of risc_clk.

//

// Revision 1.10  2001/11/12 01:11:27  mohor

// Reset signals are not combined any more.

//

// Revision 1.9  2001/10/19 11:40:01  mohor

// dbg_timescale.v changed to timescale.v This is done for the simulation of

// few different cores in a single project.

//

// Revision 1.8  2001/10/17 10:39:03  mohor

// bs_chain_o added.

//

// Revision 1.7  2001/10/16 10:09:56  mohor

// Signal names changed to lowercase.

//

//

// Revision 1.6  2001/10/15 09:55:47  mohor

// Wishbone interface added, few fixes for better performance,

// hooks for boundary scan testing added.

//

// Revision 1.5  2001/09/24 14:06:42  mohor

// Changes connected to the OpenRISC access (SPR read, SPR write).

//

// Revision 1.4  2001/09/20 10:11:25  mohor

// Working version. Few bugs fixed, comments added.

//

// Revision 1.3  2001/09/19 11:55:13  mohor

// Asynchronous set/reset not used in trace any more.

//

// Revision 1.2  2001/09/18 14:13:47  mohor

// Trace fixed. Some registers changed, trace simplified.

//

// Revision 1.1.1.1  2001/09/13 13:49:19  mohor

// Initial official release.

//

// Revision 1.3  2001/06/01 22:22:35  mohor

// This is a backup. It is not a fully working version. Not for use, yet.

//

// Revision 1.2  2001/05/18 13:10:00  mohor

// Headers changed. All additional information is now avaliable in the README.txt file.

//

// Revision 1.1.1.1  2001/05/18 06:35:02  mohor

// Initial release

//

//

// synopsys translate_off

`include "timescale.v"

// synopsys translate_on

`include "dbg_defines.v"

`include "dbg_cpu_defines.v"

// Top module

module dbg_top(

                // JTAG signals

                tck_i,

                tdi_i,

                tdo_o,

                rst_i,

                // TAP states

                shift_dr_i,

                pause_dr_i,

                update_dr_i,

                // Instructions

                debug_select_i

                `ifdef DBG_WISHBONE_SUPPORTED

                // WISHBONE common signals

                ,

                wb_clk_i,

                // WISHBONE master interface

                wb_adr_o,

                wb_dat_o,

                wb_dat_i,

                wb_cyc_o,

                wb_stb_o,

                wb_sel_o,

                wb_we_o,

                wb_ack_i,

                wb_cab_o,

                wb_err_i,

                wb_cti_o,

                wb_bte_o

                `endif

                `ifdef DBG_CPU_SUPPORTED

                // CPU signals

                ,

                cpu_clk_i,

                cpu_addr_o,

                cpu_data_i,

                cpu_data_o,

                cpu_bp_i,

                cpu_stall_o,

                cpu_stb_o,

                cpu_we_o,

                cpu_ack_i,

                cpu_rst_o

                `endif

              );

// JTAG signals

input   tck_i;

input   tdi_i;

output  tdo_o;

input   rst_i;

// TAP states

input   shift_dr_i;

input   pause_dr_i;

input   update_dr_i;

// Instructions

input   debug_select_i;

`ifdef DBG_WISHBONE_SUPPORTED

input         wb_clk_i;

output [31:0] wb_adr_o;

output [31:0] wb_dat_o;

input  [31:0] wb_dat_i;

output        wb_cyc_o;

output        wb_stb_o;

output  [3:0] wb_sel_o;

output        wb_we_o;

input         wb_ack_i;

output        wb_cab_o;

input         wb_err_i;

output  [2:0] wb_cti_o;

output  [1:0] wb_bte_o;

reg           wishbone_module;

reg           wishbone_ce;

wire          tdi_wb;

wire          tdo_wb;

wire          crc_en_wb;

wire          shift_crc_wb;

`else

wire          crc_en_wb = 1'b0;

wire          shift_crc_wb = 1'b0;

`endif

`ifdef DBG_CPU_SUPPORTED

// CPU signals

input         cpu_clk_i;

output [31:0] cpu_addr_o;

input  [31:0] cpu_data_i;

output [31:0] cpu_data_o;

input         cpu_bp_i;

output        cpu_stall_o;

output        cpu_stb_o;

output        cpu_we_o;

input         cpu_ack_i;

output        cpu_rst_o;

reg           cpu_debug_module;

reg           cpu_ce;

wire          tdi_cpu;

wire          tdo_cpu;

wire          crc_en_cpu;

wire          shift_crc_cpu;

`else

wire          crc_en_cpu = 1'b0;

wire          shift_crc_cpu = 1'b0;

`endif

reg [`DBG_TOP_DATA_CNT -1:0]        data_cnt;

reg [`DBG_TOP_CRC_CNT -1:0]         crc_cnt;

reg [`DBG_TOP_STATUS_CNT_WIDTH -1:0]      status_cnt;

reg [`DBG_TOP_MODULE_DATA_LEN -1:0]  module_dr;

reg [`DBG_TOP_MODULE_ID_LENGTH -1:0] module_id;

wire module_latch_en;

wire data_cnt_end;

wire crc_cnt_end;

wire status_cnt_end;

reg  crc_cnt_end_q;

reg  module_select;

reg  module_select_error;

wire crc_out;

wire crc_match;

wire data_shift_en;

wire selecting_command;

reg tdo_o;

wire shift_crc;

// data counter

always @ (posedge tck_i or posedge rst_i)

begin

  if (rst_i)

    data_cnt <= #1 {`DBG_TOP_DATA_CNT{1'b0}};

  else if(shift_dr_i & (~data_cnt_end))

    data_cnt <= #1 data_cnt + 1'b1;

  else if (update_dr_i)

    data_cnt <= #1 {`DBG_TOP_DATA_CNT{1'b0}};

end

assign data_cnt_end = data_cnt == `DBG_TOP_MODULE_DATA_LEN;

// crc counter

always @ (posedge tck_i or posedge rst_i)

begin

  if (rst_i)

    crc_cnt <= #1 {`DBG_TOP_CRC_CNT{1'b0}};

  else if(shift_dr_i & data_cnt_end & (~crc_cnt_end) & module_select)

    crc_cnt <= #1 crc_cnt + 1'b1;

  else if (update_dr_i)

    crc_cnt <= #1 {`DBG_TOP_CRC_CNT{1'b0}};

end

assign crc_cnt_end = crc_cnt == `DBG_TOP_CRC_LEN;

always @ (posedge tck_i or posedge rst_i)

begin

  if (rst_i)

    crc_cnt_end_q  <= #1 1'b0;

  else

    crc_cnt_end_q  <= #1 crc_cnt_end;

end

// status counter

always @ (posedge tck_i or posedge rst_i)

begin

  if (rst_i)

    status_cnt <= #1 {`DBG_TOP_STATUS_CNT_WIDTH{1'b0}};

  else if(shift_dr_i & crc_cnt_end & (~status_cnt_end))

    status_cnt <= #1 status_cnt + 1'b1;

  else if (update_dr_i)

    status_cnt <= #1 {`DBG_TOP_STATUS_CNT_WIDTH{1'b0}};

end

assign status_cnt_end = status_cnt == `DBG_TOP_STATUS_LEN;

assign selecting_command = shift_dr_i & (data_cnt == `DBG_TOP_DATA_CNT'h0) & debug_select_i;

always @ (posedge tck_i or posedge rst_i)

begin

  if (rst_i)

    module_select <= #1 1'b0;

  else if(selecting_command & tdi_i)       // Chain select

    module_select <= #1 1'b1;

  else if (update_dr_i)

    module_select <= #1 1'b0;

end

always @ (module_id)

begin

  `ifdef DBG_CPU_SUPPORTED

  cpu_debug_module  <= #1 1'b0;

  `endif

  `ifdef DBG_WISHBONE_SUPPORTED

  wishbone_module   <= #1 1'b0;

  `endif

  module_select_error    <= #1 1'b0;

  case (module_id)                /* synthesis parallel_case */

    `ifdef DBG_CPU_SUPPORTED

      `DBG_TOP_CPU_DEBUG_MODULE     :   cpu_debug_module  <= #1 1'b1;

    `endif

    `ifdef DBG_WISHBONE_SUPPORTED

      `DBG_TOP_WISHBONE_DEBUG_MODULE:   wishbone_module   <= #1 1'b1;

    `endif

    default                 :   module_select_error    <= #1 1'b1;

  endcase

end

assign module_latch_en = module_select & crc_cnt_end & (~crc_cnt_end_q);

always @ (posedge tck_i or posedge rst_i)

begin

  if (rst_i)

    module_id <= {`DBG_TOP_MODULE_ID_LENGTH{1'b1}};

  else if(module_latch_en & crc_match)

    module_id <= #1 module_dr[`DBG_TOP_MODULE_DATA_LEN -2:0];

end

assign data_shift_en = shift_dr_i & (~data_cnt_end);

always @ (posedge tck_i or posedge rst_i)

begin

  if (rst_i)

    module_dr <= #1 `DBG_TOP_MODULE_DATA_LEN'h0;

  else if (data_shift_en)

    module_dr[`DBG_TOP_MODULE_DATA_LEN -1:0] <= #1 {module_dr[`DBG_TOP_MODULE_DATA_LEN -2:0], tdi_i};

end

// Calculating crc for input data

dbg_crc32_d1 i_dbg_crc32_d1_in

             (

              .data       (tdi_i),

              .enable     (shift_dr_i),

              .shift      (1'b0),

              .rst        (rst_i),

              .sync_rst   (update_dr_i),

              .crc_out    (),

              .clk        (tck_i),

              .crc_match  (crc_match)

             );

reg tdo_module_select;

wire crc_en;

wire crc_en_dbg;

reg crc_started;

assign crc_en = crc_en_dbg | crc_en_wb | crc_en_cpu;

assign crc_en_dbg = shift_dr_i & crc_cnt_end & (~status_cnt_end);

always @ (posedge tck_i or posedge rst_i)

begin

  if (rst_i)

    crc_started <= #1 1'b0;

  else if (crc_en)

    crc_started <= #1 1'b1;

  else if (update_dr_i)

    crc_started <= #1 1'b0;

end

reg tdo_tmp;

// Calculating crc for input data

dbg_crc32_d1 i_dbg_crc32_d1_out

             (

              .data       (tdo_tmp),

              .enable     (crc_en), // enable has priority

//              .shift      (1'b0),

              .shift      (shift_dr_i & crc_started & (~crc_en)),

              .rst        (rst_i),

              .sync_rst   (update_dr_i),

              .crc_out    (crc_out),

              .clk        (tck_i),

              .crc_match  ()

             );

// Following status is shifted out: 

// 1. bit:          0 if crc is OK, else 1

// 2. bit:          0 if existing module_id is selected, 1 if non-existing module_id is selected

// 3. bit:          0 (always) 

// 4. bit:          0 (always)

always @ (status_cnt or crc_match or module_select_error or crc_out)

begin

  case (status_cnt)                   /* synthesis full_case parallel_case */

    `DBG_TOP_STATUS_CNT_WIDTH'd0  : begin

                        tdo_module_select = ~crc_match;

                      end

    `DBG_TOP_STATUS_CNT_WIDTH'd1  : begin

                        tdo_module_select = module_select_error;

                      end

    `DBG_TOP_STATUS_CNT_WIDTH'd2  : begin

                        tdo_module_select = 1'b0;

                      end

    `DBG_TOP_STATUS_CNT_WIDTH'd3  : begin

                        tdo_module_select = 1'b0;

                      end

    `DBG_TOP_STATUS_CNT_WIDTH'd4  : begin

                        tdo_module_select = crc_out;

                      end

  endcase

end

assign shift_crc = shift_crc_wb | shift_crc_cpu;

always @ (shift_crc or crc_out or tdo_module_select

`ifdef DBG_WISHBONE_SUPPORTED

 or wishbone_ce or tdo_wb

`endif

`ifdef DBG_CPU_SUPPORTED

 or cpu_ce or tdo_cpu

`endif

         )

begin

  if (shift_crc)          // shifting crc

    tdo_tmp = crc_out;

  `ifdef DBG_WISHBONE_SUPPORTED

  else if (wishbone_ce)   //  shifting data from wb

    tdo_tmp = tdo_wb;

  `endif

  `ifdef DBG_CPU_SUPPORTED

  else if (cpu_ce)        // shifting data from cpu

    tdo_tmp = tdo_cpu;

  `endif

  else

    tdo_tmp = tdo_module_select;

end

always @ (negedge tck_i)

begin

  tdo_o <= #1 tdo_tmp;

end

// Signals for WISHBONE module

always @ (posedge tck_i or posedge rst_i)

begin

  if (rst_i)

    begin

      `ifdef DBG_WISHBONE_SUPPORTED

      wishbone_ce <= #1 1'b0;

      `endif

      `ifdef DBG_CPU_SUPPORTED

      cpu_ce <= #1 1'b0;

      `endif

    end

  else if(selecting_command & (~tdi_i))

    begin

      `ifdef DBG_WISHBONE_SUPPORTED

      if (wishbone_module)      // wishbone CE

        wishbone_ce <= #1 1'b1;

      `endif

      `ifdef DBG_CPU_SUPPORTED

      if (cpu_debug_module)     // CPU CE

        cpu_ce <= #1 1'b1;

      `endif

    end

  else if (update_dr_i)

    begin

      `ifdef DBG_WISHBONE_SUPPORTED

      wishbone_ce <= #1 1'b0;

      `endif

      `ifdef DBG_CPU_SUPPORTED

      cpu_ce <= #1 1'b0;

      `endif

    end

end

`ifdef DBG_WISHBONE_SUPPORTED

assign tdi_wb  = wishbone_ce & tdi_i;

`endif

`ifdef DBG_CPU_SUPPORTED

assign tdi_cpu = cpu_ce & tdi_i;

`endif

`ifdef DBG_WISHBONE_SUPPORTED

// Connecting wishbone module

dbg_wb i_dbg_wb (

                  // JTAG signals

                  .tck_i            (tck_i),

                  .tdi_i            (tdi_wb),

                  .tdo_o            (tdo_wb),

                  // TAP states

                  .shift_dr_i       (shift_dr_i),

                  .pause_dr_i       (pause_dr_i),

                  .update_dr_i      (update_dr_i),

                  .wishbone_ce_i    (wishbone_ce),

                  .crc_match_i      (crc_match),

                  .crc_en_o         (crc_en_wb),

                  .shift_crc_o      (shift_crc_wb),

                  .rst_i            (rst_i),

                  // WISHBONE common signals

                  .wb_clk_i         (wb_clk_i),

                  // WISHBONE master interface

                  .wb_adr_o         (wb_adr_o),

                  .wb_dat_o         (wb_dat_o),

                  .wb_dat_i         (wb_dat_i),

                  .wb_cyc_o         (wb_cyc_o),

                  .wb_stb_o         (wb_stb_o),

                  .wb_sel_o         (wb_sel_o),

                  .wb_we_o          (wb_we_o),

                  .wb_ack_i         (wb_ack_i),

                  .wb_cab_o         (wb_cab_o),

                  .wb_err_i         (wb_err_i),

                  .wb_cti_o         (wb_cti_o),

                  .wb_bte_o         (wb_bte_o)

            );

`endif

`ifdef DBG_CPU_SUPPORTED

// Connecting cpu module

dbg_cpu i_dbg_cpu (

                  // JTAG signals

                  .tck_i            (tck_i),

                  .tdi_i            (tdi_cpu),

                  .tdo_o            (tdo_cpu),

                  // TAP states

                  .shift_dr_i       (shift_dr_i),

                  .pause_dr_i       (pause_dr_i),

                  .update_dr_i      (update_dr_i),

                  .cpu_ce_i         (cpu_ce),

                  .crc_match_i      (crc_match),

                  .crc_en_o         (crc_en_cpu),

                  .shift_crc_o      (shift_crc_cpu),

                  .rst_i            (rst_i),

                  // CPU signals

                  .cpu_clk_i        (cpu_clk_i),

                  .cpu_addr_o       (cpu_addr_o),

                  .cpu_data_i       (cpu_data_i),

                  .cpu_data_o       (cpu_data_o),

                  .cpu_bp_i         (cpu_bp_i),

                  .cpu_stall_o      (cpu_stall_o),

                  .cpu_stb_o        (cpu_stb_o),

                  .cpu_we_o         (cpu_we_o),

                  .cpu_ack_i        (cpu_ack_i),

                  .cpu_rst_o        (cpu_rst_o)

              );

`endif  //  DBG_CPU_SUPPORTED

endmodule