1 |
29 |
dgisselq |
////////////////////////////////////////////////////////////////////////////////
|
2 |
16 |
dgisselq |
//
|
3 |
24 |
dgisselq |
// Filename: fftgen.cpp
|
4 |
16 |
dgisselq |
//
|
5 |
36 |
dgisselq |
// Project: A General Purpose Pipelined FFT Implementation
|
6 |
16 |
dgisselq |
//
|
7 |
|
|
// Purpose: This is the core generator for the project. Every part
|
8 |
|
|
// and piece of this project begins and ends in this program.
|
9 |
33 |
dgisselq |
// Once built, this program will build an FFT (or IFFT) core of arbitrary
|
10 |
|
|
// width, precision, etc., that will run at two samples per clock.
|
11 |
|
|
// (Incidentally, I didn't pick two samples per clock because it was
|
12 |
|
|
// easier, but rather because there weren't any two-sample per clock
|
13 |
|
|
// FFT's posted on opencores.com. Further, FFT's running at one sample
|
14 |
|
|
// per aren't that hard to find.)
|
15 |
16 |
dgisselq |
//
|
16 |
33 |
dgisselq |
// You can find the documentation for this program in two places. One is
|
17 |
|
|
// in the usage() function below. The second is in the 'doc'uments
|
18 |
|
|
// directory that comes with this package, specifically in the spec.pdf
|
19 |
|
|
// file. If it's not there, type make in the documents directory to
|
20 |
|
|
// build it.
|
21 |
16 |
dgisselq |
//
|
22 |
31 |
dgisselq |
// 20160123 - Thanks to Lesha Birukov, adjusted for MS Visual Studio 2012.
|
23 |
|
|
// (Adjustments are at the top of the file ...)
|
24 |
|
|
//
|
25 |
16 |
dgisselq |
// Creator: Dan Gisselquist, Ph.D.
|
26 |
30 |
dgisselq |
// Gisselquist Technology, LLC
|
27 |
16 |
dgisselq |
//
|
28 |
29 |
dgisselq |
////////////////////////////////////////////////////////////////////////////////
|
29 |
16 |
dgisselq |
//
|
30 |
36 |
dgisselq |
// Copyright (C) 2015-2018, Gisselquist Technology, LLC
|
31 |
16 |
dgisselq |
//
|
32 |
|
|
// This program is free software (firmware): you can redistribute it and/or
|
33 |
|
|
// modify it under the terms of the GNU General Public License as published
|
34 |
|
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
35 |
|
|
// your option) any later version.
|
36 |
|
|
//
|
37 |
|
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
38 |
|
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
39 |
|
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
40 |
|
|
// for more details.
|
41 |
|
|
//
|
42 |
|
|
// You should have received a copy of the GNU General Public License along
|
43 |
37 |
dgisselq |
// with this program. (It's in the $(ROOT)/doc directory. Run make with no
|
44 |
16 |
dgisselq |
// target there if the PDF file isn't present.) If not, see
|
45 |
|
|
// <http://www.gnu.org/licenses/> for a copy.
|
46 |
|
|
//
|
47 |
|
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
48 |
|
|
// http://www.gnu.org/licenses/gpl.html
|
49 |
|
|
//
|
50 |
|
|
//
|
51 |
29 |
dgisselq |
////////////////////////////////////////////////////////////////////////////////
|
52 |
16 |
dgisselq |
//
|
53 |
|
|
//
|
54 |
31 |
dgisselq |
#define _CRT_SECURE_NO_WARNINGS // ms vs 2012 doesn't like fopen
|
55 |
2 |
dgisselq |
#include <stdio.h>
|
56 |
|
|
#include <stdlib.h>
|
57 |
31 |
dgisselq |
|
58 |
|
|
#ifdef _MSC_VER // added for ms vs compatibility
|
59 |
|
|
|
60 |
|
|
#include <io.h>
|
61 |
|
|
#include <direct.h>
|
62 |
|
|
#define _USE_MATH_DEFINES
|
63 |
|
|
#define R_OK 4 /* Test for read permission. */
|
64 |
|
|
#define W_OK 2 /* Test for write permission. */
|
65 |
|
|
#define X_OK 0 /* !!!!!! execute permission - unsupported in windows*/
|
66 |
|
|
#define F_OK 0 /* Test for existence. */
|
67 |
|
|
|
68 |
|
|
#if _MSC_VER <= 1700
|
69 |
|
|
|
70 |
|
|
int lstat(const char *filename, struct stat *buf) { return 1; };
|
71 |
|
|
#define S_ISDIR(A) 0
|
72 |
|
|
|
73 |
|
|
#else
|
74 |
|
|
|
75 |
|
|
#define lstat _stat
|
76 |
|
|
#define S_ISDIR _S_IFDIR
|
77 |
|
|
|
78 |
|
|
#endif
|
79 |
|
|
|
80 |
|
|
#define mkdir(A,B) _mkdir(A)
|
81 |
|
|
|
82 |
|
|
#define access _access
|
83 |
|
|
|
84 |
|
|
#else
|
85 |
|
|
// And for G++/Linux environment
|
86 |
|
|
|
87 |
|
|
#include <unistd.h> // Defines the R_OK/W_OK/etc. macros
|
88 |
2 |
dgisselq |
#include <sys/stat.h>
|
89 |
31 |
dgisselq |
#endif
|
90 |
|
|
|
91 |
2 |
dgisselq |
#include <string.h>
|
92 |
14 |
dgisselq |
#include <string>
|
93 |
2 |
dgisselq |
#include <math.h>
|
94 |
|
|
#include <ctype.h>
|
95 |
|
|
#include <assert.h>
|
96 |
|
|
|
97 |
36 |
dgisselq |
#include "defaults.h"
|
98 |
|
|
#include "legal.h"
|
99 |
|
|
#include "rounding.h"
|
100 |
|
|
#include "fftlib.h"
|
101 |
|
|
#include "bldstage.h"
|
102 |
|
|
#include "bitreverse.h"
|
103 |
|
|
#include "softmpy.h"
|
104 |
|
|
#include "butterfly.h"
|
105 |
2 |
dgisselq |
|
106 |
36 |
dgisselq |
void build_dblquarters(const char *fname, ROUND_T rounding, const bool async_reset=false, const bool dbg=false) {
|
107 |
2 |
dgisselq |
FILE *fp = fopen(fname, "w");
|
108 |
|
|
if (NULL == fp) {
|
109 |
|
|
fprintf(stderr, "Could not open \'%s\' for writing\n", fname);
|
110 |
|
|
perror("O/S Err was:");
|
111 |
|
|
return;
|
112 |
|
|
}
|
113 |
23 |
dgisselq |
const char *rnd_string;
|
114 |
|
|
if (rounding == RND_TRUNCATE)
|
115 |
|
|
rnd_string = "truncate";
|
116 |
|
|
else if (rounding == RND_FROMZERO)
|
117 |
|
|
rnd_string = "roundfromzero";
|
118 |
|
|
else if (rounding == RND_HALFUP)
|
119 |
|
|
rnd_string = "roundhalfup";
|
120 |
|
|
else
|
121 |
|
|
rnd_string = "convround";
|
122 |
|
|
|
123 |
|
|
|
124 |
|
|
fprintf(fp,
|
125 |
36 |
dgisselq |
SLASHLINE
|
126 |
23 |
dgisselq |
"//\n"
|
127 |
36 |
dgisselq |
"// Filename:\tqtrstage%s.v\n"
|
128 |
2 |
dgisselq |
"//\n"
|
129 |
36 |
dgisselq |
"// Project:\t%s\n"
|
130 |
|
|
"//\n"
|
131 |
5 |
dgisselq |
"// Purpose: This file encapsulates the 4 point stage of a decimation in\n"
|
132 |
|
|
"// frequency FFT. This particular implementation is optimized\n"
|
133 |
36 |
dgisselq |
"// so that all of the multiplies are accomplished by additions and\n"
|
134 |
|
|
"// multiplexers only.\n"
|
135 |
5 |
dgisselq |
"//\n"
|
136 |
2 |
dgisselq |
"//\n%s"
|
137 |
|
|
"//\n",
|
138 |
26 |
dgisselq |
(dbg)?"_dbg":"", prjname, creator);
|
139 |
2 |
dgisselq |
fprintf(fp, "%s", cpyleft);
|
140 |
35 |
dgisselq |
fprintf(fp, "//\n//\n`default_nettype\tnone\n//\n");
|
141 |
2 |
dgisselq |
|
142 |
36 |
dgisselq |
std::string resetw("i_reset");
|
143 |
|
|
if (async_reset)
|
144 |
|
|
resetw = std::string("i_areset_n");
|
145 |
|
|
|
146 |
2 |
dgisselq |
fprintf(fp,
|
147 |
36 |
dgisselq |
"module\tqtrstage%s(i_clk, %s, i_ce, i_sync, i_data, o_data, o_sync%s);\n"
|
148 |
29 |
dgisselq |
"\tparameter IWIDTH=%d, OWIDTH=IWIDTH+1;\n"
|
149 |
5 |
dgisselq |
"\t// Parameters specific to the core that should be changed when this\n"
|
150 |
36 |
dgisselq |
"\t// core is built ... Note that the minimum LGSPAN is 2. Smaller\n"
|
151 |
5 |
dgisselq |
"\t// spans must use the fftdoubles stage.\n"
|
152 |
29 |
dgisselq |
"\tparameter\tLGWIDTH=%d, ODD=0, INVERSE=0,SHIFT=0;\n"
|
153 |
37 |
dgisselq |
"\tinput\twire i_clk, %s, i_ce, i_sync;\n"
|
154 |
|
|
"\tinput\twire [(2*IWIDTH-1):0] i_data;\n"
|
155 |
5 |
dgisselq |
"\toutput\treg [(2*OWIDTH-1):0] o_data;\n"
|
156 |
|
|
"\toutput\treg o_sync;\n"
|
157 |
36 |
dgisselq |
"\t\n", (dbg)?"_dbg":"",
|
158 |
|
|
resetw.c_str(),
|
159 |
|
|
(dbg)?", o_dbg":"", TST_QTRSTAGE_IWIDTH,
|
160 |
|
|
TST_QTRSTAGE_LGWIDTH, resetw.c_str());
|
161 |
26 |
dgisselq |
if (dbg) { fprintf(fp, "\toutput\twire\t[33:0]\t\t\to_dbg;\n"
|
162 |
|
|
"\tassign\to_dbg = { ((o_sync)&&(i_ce)), i_ce, o_data[(2*OWIDTH-1):(2*OWIDTH-16)],\n"
|
163 |
|
|
"\t\t\t\t\to_data[(OWIDTH-1):(OWIDTH-16)] };\n"
|
164 |
|
|
"\n");
|
165 |
|
|
}
|
166 |
14 |
dgisselq |
fprintf(fp,
|
167 |
5 |
dgisselq |
"\treg\t wait_for_sync;\n"
|
168 |
23 |
dgisselq |
"\treg\t[3:0] pipeline;\n"
|
169 |
2 |
dgisselq |
"\n"
|
170 |
5 |
dgisselq |
"\treg\t[(IWIDTH):0] sum_r, sum_i, diff_r, diff_i;\n"
|
171 |
2 |
dgisselq |
"\n"
|
172 |
23 |
dgisselq |
"\treg\t[(2*OWIDTH-1):0]\tob_a;\n"
|
173 |
|
|
"\twire\t[(2*OWIDTH-1):0]\tob_b;\n"
|
174 |
|
|
"\treg\t[(OWIDTH-1):0]\t\tob_b_r, ob_b_i;\n"
|
175 |
|
|
"\tassign\tob_b = { ob_b_r, ob_b_i };\n"
|
176 |
2 |
dgisselq |
"\n"
|
177 |
23 |
dgisselq |
"\treg\t[(LGWIDTH-1):0]\t\tiaddr;\n"
|
178 |
|
|
"\treg\t[(2*IWIDTH-1):0]\timem;\n"
|
179 |
2 |
dgisselq |
"\n"
|
180 |
5 |
dgisselq |
"\twire\tsigned\t[(IWIDTH-1):0]\timem_r, imem_i;\n"
|
181 |
|
|
"\tassign\timem_r = imem[(2*IWIDTH-1):(IWIDTH)];\n"
|
182 |
|
|
"\tassign\timem_i = imem[(IWIDTH-1):0];\n"
|
183 |
2 |
dgisselq |
"\n"
|
184 |
5 |
dgisselq |
"\twire\tsigned\t[(IWIDTH-1):0]\ti_data_r, i_data_i;\n"
|
185 |
|
|
"\tassign\ti_data_r = i_data[(2*IWIDTH-1):(IWIDTH)];\n"
|
186 |
|
|
"\tassign\ti_data_i = i_data[(IWIDTH-1):0];\n"
|
187 |
2 |
dgisselq |
"\n"
|
188 |
5 |
dgisselq |
"\treg [(2*OWIDTH-1):0] omem;\n"
|
189 |
14 |
dgisselq |
"\n");
|
190 |
|
|
fprintf(fp,
|
191 |
23 |
dgisselq |
"\twire\tsigned\t[(OWIDTH-1):0]\trnd_sum_r, rnd_sum_i, rnd_diff_r, rnd_diff_i,\n");
|
192 |
|
|
fprintf(fp,
|
193 |
|
|
"\t\t\t\t\tn_rnd_diff_r, n_rnd_diff_i;\n");
|
194 |
|
|
fprintf(fp,
|
195 |
26 |
dgisselq |
"\t%s #(IWIDTH+1,OWIDTH,SHIFT)\tdo_rnd_sum_r(i_clk, i_ce,\n"
|
196 |
23 |
dgisselq |
"\t\t\t\tsum_r, rnd_sum_r);\n\n", rnd_string);
|
197 |
|
|
fprintf(fp,
|
198 |
26 |
dgisselq |
"\t%s #(IWIDTH+1,OWIDTH,SHIFT)\tdo_rnd_sum_i(i_clk, i_ce,\n"
|
199 |
23 |
dgisselq |
"\t\t\t\tsum_i, rnd_sum_i);\n\n", rnd_string);
|
200 |
|
|
fprintf(fp,
|
201 |
26 |
dgisselq |
"\t%s #(IWIDTH+1,OWIDTH,SHIFT)\tdo_rnd_diff_r(i_clk, i_ce,\n"
|
202 |
23 |
dgisselq |
"\t\t\t\tdiff_r, rnd_diff_r);\n\n", rnd_string);
|
203 |
|
|
fprintf(fp,
|
204 |
26 |
dgisselq |
"\t%s #(IWIDTH+1,OWIDTH,SHIFT)\tdo_rnd_diff_i(i_clk, i_ce,\n"
|
205 |
23 |
dgisselq |
"\t\t\t\tdiff_i, rnd_diff_i);\n\n", rnd_string);
|
206 |
|
|
fprintf(fp, "\tassign n_rnd_diff_r = - rnd_diff_r;\n"
|
207 |
|
|
"\tassign n_rnd_diff_i = - rnd_diff_i;\n");
|
208 |
|
|
/*
|
209 |
|
|
fprintf(fp,
|
210 |
5 |
dgisselq |
"\twire [(IWIDTH-1):0] rnd;\n"
|
211 |
9 |
dgisselq |
"\tgenerate\n"
|
212 |
|
|
"\tif ((ROUND)&&((IWIDTH+1-OWIDTH-SHIFT)>0))\n"
|
213 |
26 |
dgisselq |
"\t\tassign rnd = { {(IWIDTH-1){1\'b0}}, 1\'b1 };\n"
|
214 |
9 |
dgisselq |
"\telse\n"
|
215 |
26 |
dgisselq |
"\t\tassign rnd = { {(IWIDTH){1\'b0}}};\n"
|
216 |
9 |
dgisselq |
"\tendgenerate\n"
|
217 |
2 |
dgisselq |
"\n"
|
218 |
23 |
dgisselq |
*/
|
219 |
|
|
fprintf(fp,
|
220 |
25 |
dgisselq |
"\tinitial wait_for_sync = 1\'b1;\n"
|
221 |
36 |
dgisselq |
"\tinitial iaddr = 0;\n");
|
222 |
|
|
if (async_reset)
|
223 |
|
|
fprintf(fp,
|
224 |
|
|
"\talways @(posedge i_clk, negedge i_areset_n)\n"
|
225 |
|
|
"\t\tif (!i_reset)\n");
|
226 |
|
|
else
|
227 |
|
|
fprintf(fp,
|
228 |
5 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
229 |
36 |
dgisselq |
"\t\tif (i_reset)\n");
|
230 |
|
|
fprintf(fp,
|
231 |
5 |
dgisselq |
"\t\tbegin\n"
|
232 |
26 |
dgisselq |
"\t\t\twait_for_sync <= 1\'b1;\n"
|
233 |
5 |
dgisselq |
"\t\t\tiaddr <= 0;\n"
|
234 |
35 |
dgisselq |
"\t\tend else if ((i_ce)&&((!wait_for_sync)||(i_sync)))\n"
|
235 |
5 |
dgisselq |
"\t\tbegin\n"
|
236 |
26 |
dgisselq |
"\t\t\tiaddr <= iaddr + { {(LGWIDTH-1){1\'b0}}, 1\'b1 };\n"
|
237 |
|
|
"\t\t\twait_for_sync <= 1\'b0;\n"
|
238 |
36 |
dgisselq |
"\t\tend\n\n"
|
239 |
26 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
240 |
|
|
"\t\tif (i_ce)\n"
|
241 |
5 |
dgisselq |
"\t\t\timem <= i_data;\n"
|
242 |
26 |
dgisselq |
"\n\n");
|
243 |
23 |
dgisselq |
fprintf(fp,
|
244 |
|
|
"\t// Note that we don\'t check on wait_for_sync or i_sync here.\n"
|
245 |
|
|
"\t// Why not? Because iaddr will always be zero until after the\n"
|
246 |
|
|
"\t// first i_ce, so we are safe.\n"
|
247 |
36 |
dgisselq |
"\tinitial pipeline = 4\'h0;\n");
|
248 |
|
|
if (async_reset)
|
249 |
|
|
fprintf(fp,
|
250 |
|
|
"\talways\t@(posedge i_clk, negedge i_areset_n)\n"
|
251 |
|
|
"\t\tif (!i_reset)\n");
|
252 |
|
|
else
|
253 |
|
|
fprintf(fp,
|
254 |
23 |
dgisselq |
"\talways\t@(posedge i_clk)\n"
|
255 |
36 |
dgisselq |
"\t\tif (i_reset)\n");
|
256 |
|
|
|
257 |
|
|
fprintf(fp,
|
258 |
26 |
dgisselq |
"\t\t\tpipeline <= 4\'h0;\n"
|
259 |
23 |
dgisselq |
"\t\telse if (i_ce) // is our pipeline process full? Which stages?\n"
|
260 |
|
|
"\t\t\tpipeline <= { pipeline[2:0], iaddr[0] };\n\n");
|
261 |
|
|
fprintf(fp,
|
262 |
|
|
"\t// This is the pipeline[-1] stage, pipeline[0] will be set next.\n"
|
263 |
|
|
"\talways\t@(posedge i_clk)\n"
|
264 |
|
|
"\t\tif ((i_ce)&&(iaddr[0]))\n"
|
265 |
|
|
"\t\tbegin\n"
|
266 |
|
|
"\t\t\tsum_r <= imem_r + i_data_r;\n"
|
267 |
|
|
"\t\t\tsum_i <= imem_i + i_data_i;\n"
|
268 |
|
|
"\t\t\tdiff_r <= imem_r - i_data_r;\n"
|
269 |
|
|
"\t\t\tdiff_i <= imem_i - i_data_i;\n"
|
270 |
|
|
"\t\tend\n\n");
|
271 |
|
|
fprintf(fp,
|
272 |
|
|
"\t// pipeline[1] takes sum_x and diff_x and produces rnd_x\n\n");
|
273 |
|
|
fprintf(fp,
|
274 |
26 |
dgisselq |
"\t// Now for pipeline[2]. We can actually do this at all i_ce\n"
|
275 |
|
|
"\t// clock times, since nothing will listen unless pipeline[3]\n"
|
276 |
|
|
"\t// on the next clock. Thus, we simplify this logic and do\n"
|
277 |
|
|
"\t// it independent of pipeline[2].\n"
|
278 |
23 |
dgisselq |
"\talways\t@(posedge i_clk)\n"
|
279 |
26 |
dgisselq |
"\t\tif (i_ce)\n"
|
280 |
23 |
dgisselq |
"\t\tbegin\n"
|
281 |
|
|
"\t\t\tob_a <= { rnd_sum_r, rnd_sum_i };\n"
|
282 |
|
|
"\t\t\t// on Even, W = e^{-j2pi 1/4 0} = 1\n"
|
283 |
|
|
"\t\t\tif (ODD == 0)\n"
|
284 |
5 |
dgisselq |
"\t\t\tbegin\n"
|
285 |
23 |
dgisselq |
"\t\t\t\tob_b_r <= rnd_diff_r;\n"
|
286 |
|
|
"\t\t\t\tob_b_i <= rnd_diff_i;\n"
|
287 |
|
|
"\t\t\tend else if (INVERSE==0) begin\n"
|
288 |
|
|
"\t\t\t\t// on Odd, W = e^{-j2pi 1/4} = -j\n"
|
289 |
|
|
"\t\t\t\tob_b_r <= rnd_diff_i;\n"
|
290 |
|
|
"\t\t\t\tob_b_i <= n_rnd_diff_r;\n"
|
291 |
|
|
"\t\t\tend else begin\n"
|
292 |
|
|
"\t\t\t\t// on Odd, W = e^{j2pi 1/4} = j\n"
|
293 |
|
|
"\t\t\t\tob_b_r <= n_rnd_diff_i;\n"
|
294 |
|
|
"\t\t\t\tob_b_i <= rnd_diff_r;\n"
|
295 |
5 |
dgisselq |
"\t\t\tend\n"
|
296 |
23 |
dgisselq |
"\t\tend\n\n");
|
297 |
|
|
fprintf(fp,
|
298 |
|
|
"\talways\t@(posedge i_clk)\n"
|
299 |
|
|
"\t\tif (i_ce)\n"
|
300 |
|
|
"\t\tbegin // In sequence, clock = 3\n"
|
301 |
|
|
"\t\t\tif (pipeline[3])\n"
|
302 |
5 |
dgisselq |
"\t\t\tbegin\n"
|
303 |
|
|
"\t\t\t\tomem <= ob_b;\n"
|
304 |
|
|
"\t\t\t\to_data <= ob_a;\n"
|
305 |
|
|
"\t\t\tend else\n"
|
306 |
|
|
"\t\t\t\to_data <= omem;\n"
|
307 |
23 |
dgisselq |
"\t\tend\n\n");
|
308 |
|
|
|
309 |
|
|
fprintf(fp,
|
310 |
|
|
"\t// Don\'t forget in the sync check that we are running\n"
|
311 |
|
|
"\t// at two clocks per sample. Thus we need to\n"
|
312 |
|
|
"\t// produce a sync every 2^(LGWIDTH-1) clocks.\n"
|
313 |
36 |
dgisselq |
"\tinitial\to_sync = 1\'b0;\n");
|
314 |
|
|
|
315 |
|
|
if (async_reset)
|
316 |
|
|
fprintf(fp,
|
317 |
|
|
"\talways\t@(posedge i_clk, negedge i_areset_n)\n"
|
318 |
|
|
"\t\tif (!i_areset_n)\n");
|
319 |
|
|
else
|
320 |
|
|
fprintf(fp,
|
321 |
23 |
dgisselq |
"\talways\t@(posedge i_clk)\n"
|
322 |
36 |
dgisselq |
"\t\tif (i_reset)\n");
|
323 |
|
|
fprintf(fp,
|
324 |
26 |
dgisselq |
"\t\t\to_sync <= 1\'b0;\n"
|
325 |
|
|
"\t\telse if (i_ce)\n"
|
326 |
23 |
dgisselq |
"\t\t\to_sync <= &(~iaddr[(LGWIDTH-2):3]) && (iaddr[2:0] == 3'b101);\n");
|
327 |
|
|
fprintf(fp, "endmodule\n");
|
328 |
2 |
dgisselq |
}
|
329 |
|
|
|
330 |
36 |
dgisselq |
void build_snglquarters(const char *fname, ROUND_T rounding, const bool async_reset=false, const bool dbg=false) {
|
331 |
2 |
dgisselq |
FILE *fp = fopen(fname, "w");
|
332 |
|
|
if (NULL == fp) {
|
333 |
|
|
fprintf(stderr, "Could not open \'%s\' for writing\n", fname);
|
334 |
|
|
perror("O/S Err was:");
|
335 |
|
|
return;
|
336 |
|
|
}
|
337 |
23 |
dgisselq |
const char *rnd_string;
|
338 |
|
|
if (rounding == RND_TRUNCATE)
|
339 |
|
|
rnd_string = "truncate";
|
340 |
|
|
else if (rounding == RND_FROMZERO)
|
341 |
|
|
rnd_string = "roundfromzero";
|
342 |
|
|
else if (rounding == RND_HALFUP)
|
343 |
|
|
rnd_string = "roundhalfup";
|
344 |
|
|
else
|
345 |
|
|
rnd_string = "convround";
|
346 |
|
|
|
347 |
|
|
|
348 |
2 |
dgisselq |
fprintf(fp,
|
349 |
36 |
dgisselq |
SLASHLINE
|
350 |
2 |
dgisselq |
"//\n"
|
351 |
36 |
dgisselq |
"// Filename:\tqtrstage%s.v\n"
|
352 |
2 |
dgisselq |
"//\n"
|
353 |
36 |
dgisselq |
"// Project:\t%s\n"
|
354 |
2 |
dgisselq |
"//\n"
|
355 |
36 |
dgisselq |
"// Purpose: This file encapsulates the 4 point stage of a decimation in\n"
|
356 |
|
|
"// frequency FFT. This particular implementation is optimized\n"
|
357 |
|
|
"// so that all of the multiplies are accomplished by additions and\n"
|
358 |
|
|
"// multiplexers only.\n"
|
359 |
2 |
dgisselq |
"//\n"
|
360 |
36 |
dgisselq |
"// Operation:\n"
|
361 |
|
|
"// The operation of this stage is identical to the regular stages of\n"
|
362 |
|
|
"// the FFT (see them for details), with one additional and critical\n"
|
363 |
|
|
"// difference: this stage doesn't require any hardware multiplication.\n"
|
364 |
|
|
"// The multiplies within it may all be accomplished using additions and\n"
|
365 |
|
|
"// subtractions.\n"
|
366 |
|
|
"//\n"
|
367 |
|
|
"// Let's see how this is done. Given x[n] and x[n+2], cause thats the\n"
|
368 |
|
|
"// stage we are working on, with i_sync true for x[0] being input,\n"
|
369 |
|
|
"// produce the output:\n"
|
370 |
|
|
"//\n"
|
371 |
|
|
"// y[n ] = x[n] + x[n+2]\n"
|
372 |
|
|
"// y[n+2] = (x[n] - x[n+2]) * e^{-j2pi n/2} (forward transform)\n"
|
373 |
|
|
"// = (x[n] - x[n+2]) * -j^n\n"
|
374 |
|
|
"//\n"
|
375 |
|
|
"// y[n].r = x[n].r + x[n+2].r (This is the easy part)\n"
|
376 |
|
|
"// y[n].i = x[n].i + x[n+2].i\n"
|
377 |
|
|
"//\n"
|
378 |
|
|
"// y[2].r = x[0].r - x[2].r\n"
|
379 |
|
|
"// y[2].i = x[0].i - x[2].i\n"
|
380 |
|
|
"//\n"
|
381 |
|
|
"// y[3].r = (x[1].i - x[3].i) (forward transform)\n"
|
382 |
|
|
"// y[3].i = - (x[1].r - x[3].r)\n"
|
383 |
|
|
"//\n"
|
384 |
|
|
"// y[3].r = - (x[1].i - x[3].i) (inverse transform)\n"
|
385 |
|
|
"// y[3].i = (x[1].r - x[3].r) (INVERSE = 1)\n"
|
386 |
|
|
// "//\n"
|
387 |
|
|
// "// When the FFT is run in the two samples per clock mode, this quarter\n"
|
388 |
|
|
// "// stage will operate on either x[0] and x[2] (ODD = 0), or x[1] and\n"
|
389 |
|
|
// "// x[3] (ODD = 1). In all other cases, it will operate on all four\n"
|
390 |
|
|
// "// values.\n"
|
391 |
2 |
dgisselq |
"//\n%s"
|
392 |
36 |
dgisselq |
"//\n",
|
393 |
|
|
(dbg)?"_dbg":"", prjname, creator);
|
394 |
2 |
dgisselq |
fprintf(fp, "%s", cpyleft);
|
395 |
35 |
dgisselq |
fprintf(fp, "//\n//\n`default_nettype\tnone\n//\n");
|
396 |
36 |
dgisselq |
|
397 |
|
|
std::string resetw("i_reset");
|
398 |
|
|
if (async_reset)
|
399 |
|
|
resetw = std::string("i_areset_n");
|
400 |
|
|
|
401 |
33 |
dgisselq |
fprintf(fp,
|
402 |
36 |
dgisselq |
"module\tqtrstage%s(i_clk, %s, i_ce, i_sync, i_data, o_data, o_sync%s);\n"
|
403 |
|
|
"\tparameter IWIDTH=%d, OWIDTH=IWIDTH+1;\n"
|
404 |
|
|
"\tparameter\tLGWIDTH=%d, INVERSE=0,SHIFT=0;\n"
|
405 |
37 |
dgisselq |
"\tinput\twire i_clk, %s, i_ce, i_sync;\n"
|
406 |
|
|
"\tinput\twire [(2*IWIDTH-1):0] i_data;\n"
|
407 |
36 |
dgisselq |
"\toutput\treg [(2*OWIDTH-1):0] o_data;\n"
|
408 |
|
|
"\toutput\treg o_sync;\n"
|
409 |
|
|
"\t\n", (dbg)?"_dbg":"", resetw.c_str(),
|
410 |
|
|
(dbg)?", o_dbg":"", TST_QTRSTAGE_IWIDTH,
|
411 |
|
|
TST_QTRSTAGE_LGWIDTH, resetw.c_str());
|
412 |
26 |
dgisselq |
if (dbg) { fprintf(fp, "\toutput\twire\t[33:0]\t\t\to_dbg;\n"
|
413 |
36 |
dgisselq |
"\tassign\to_dbg = { ((o_sync)&&(i_ce)), i_ce, o_data[(2*OWIDTH-1):(2*OWIDTH-16)],\n"
|
414 |
|
|
"\t\t\t\t\to_data[(OWIDTH-1):(OWIDTH-16)] };\n"
|
415 |
26 |
dgisselq |
"\n");
|
416 |
|
|
}
|
417 |
36 |
dgisselq |
|
418 |
33 |
dgisselq |
fprintf(fp,
|
419 |
36 |
dgisselq |
"\treg\t wait_for_sync;\n"
|
420 |
|
|
"\treg\t[2:0] pipeline;\n"
|
421 |
2 |
dgisselq |
"\n"
|
422 |
36 |
dgisselq |
"\treg\tsigned [(IWIDTH):0] sum_r, sum_i, diff_r, diff_i;\n"
|
423 |
15 |
dgisselq |
"\n"
|
424 |
36 |
dgisselq |
"\treg\t[(2*OWIDTH-1):0]\tob_a;\n"
|
425 |
|
|
"\twire\t[(2*OWIDTH-1):0]\tob_b;\n"
|
426 |
|
|
"\treg\t[(OWIDTH-1):0]\t\tob_b_r, ob_b_i;\n"
|
427 |
|
|
"\tassign\tob_b = { ob_b_r, ob_b_i };\n"
|
428 |
15 |
dgisselq |
"\n"
|
429 |
36 |
dgisselq |
"\treg\t[(LGWIDTH-1):0]\t\tiaddr;\n"
|
430 |
|
|
"\treg\t[(2*IWIDTH-1):0]\timem\t[0:1];\n"
|
431 |
2 |
dgisselq |
"\n"
|
432 |
36 |
dgisselq |
"\twire\tsigned\t[(IWIDTH-1):0]\timem_r, imem_i;\n"
|
433 |
|
|
"\tassign\timem_r = imem[1][(2*IWIDTH-1):(IWIDTH)];\n"
|
434 |
|
|
"\tassign\timem_i = imem[1][(IWIDTH-1):0];\n"
|
435 |
26 |
dgisselq |
"\n"
|
436 |
36 |
dgisselq |
"\twire\tsigned\t[(IWIDTH-1):0]\ti_data_r, i_data_i;\n"
|
437 |
|
|
"\tassign\ti_data_r = i_data[(2*IWIDTH-1):(IWIDTH)];\n"
|
438 |
|
|
"\tassign\ti_data_i = i_data[(IWIDTH-1):0];\n"
|
439 |
|
|
"\n"
|
440 |
|
|
"\treg [(2*OWIDTH-1):0] omem [0:1];\n"
|
441 |
28 |
dgisselq |
"\n");
|
442 |
36 |
dgisselq |
|
443 |
|
|
fprintf(fp, "\t//\n"
|
444 |
|
|
"\t// Round our output values down to OWIDTH bits\n"
|
445 |
|
|
"\t//\n");
|
446 |
|
|
|
447 |
28 |
dgisselq |
fprintf(fp,
|
448 |
36 |
dgisselq |
"\twire\tsigned\t[(OWIDTH-1):0]\trnd_sum_r, rnd_sum_i,\n"
|
449 |
|
|
"\t\t\trnd_diff_r, rnd_diff_i, n_rnd_diff_r, n_rnd_diff_i;\n"
|
450 |
|
|
"\t%s #(IWIDTH+1,OWIDTH,SHIFT)\tdo_rnd_sum_r(i_clk, i_ce,\n"
|
451 |
|
|
"\t\t\t\tsum_r, rnd_sum_r);\n\n", rnd_string);
|
452 |
28 |
dgisselq |
fprintf(fp,
|
453 |
36 |
dgisselq |
"\t%s #(IWIDTH+1,OWIDTH,SHIFT)\tdo_rnd_sum_i(i_clk, i_ce,\n"
|
454 |
|
|
"\t\t\t\tsum_i, rnd_sum_i);\n\n", rnd_string);
|
455 |
28 |
dgisselq |
fprintf(fp,
|
456 |
36 |
dgisselq |
"\t%s #(IWIDTH+1,OWIDTH,SHIFT)\tdo_rnd_diff_r(i_clk, i_ce,\n"
|
457 |
|
|
"\t\t\t\tdiff_r, rnd_diff_r);\n\n", rnd_string);
|
458 |
28 |
dgisselq |
fprintf(fp,
|
459 |
36 |
dgisselq |
"\t%s #(IWIDTH+1,OWIDTH,SHIFT)\tdo_rnd_diff_i(i_clk, i_ce,\n"
|
460 |
|
|
"\t\t\t\tdiff_i, rnd_diff_i);\n\n", rnd_string);
|
461 |
|
|
fprintf(fp, "\tassign n_rnd_diff_r = - rnd_diff_r;\n"
|
462 |
|
|
"\tassign n_rnd_diff_i = - rnd_diff_i;\n");
|
463 |
|
|
fprintf(fp,
|
464 |
|
|
"\tinitial wait_for_sync = 1\'b1;\n"
|
465 |
|
|
"\tinitial iaddr = 0;\n");
|
466 |
|
|
if (async_reset)
|
467 |
|
|
fprintf(fp,
|
468 |
|
|
"\talways @(posedge i_clk, negedge i_areset_n)\n"
|
469 |
|
|
"\t\tif (!i_reset)\n");
|
470 |
|
|
else
|
471 |
|
|
fprintf(fp,
|
472 |
|
|
"\talways @(posedge i_clk)\n"
|
473 |
|
|
"\t\tif (i_reset)\n");
|
474 |
28 |
dgisselq |
|
475 |
36 |
dgisselq |
fprintf(fp, "\t\tbegin\n"
|
476 |
|
|
"\t\t\twait_for_sync <= 1\'b1;\n"
|
477 |
|
|
"\t\t\tiaddr <= 0;\n"
|
478 |
|
|
"\t\tend else if ((i_ce)&&((!wait_for_sync)||(i_sync)))\n"
|
479 |
|
|
"\t\tbegin\n"
|
480 |
|
|
"\t\t\tiaddr <= iaddr + 1\'b1;\n"
|
481 |
|
|
"\t\t\twait_for_sync <= 1\'b0;\n"
|
482 |
|
|
"\t\tend\n\n"
|
483 |
28 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
484 |
|
|
"\t\tif (i_ce)\n"
|
485 |
|
|
"\t\tbegin\n"
|
486 |
36 |
dgisselq |
"\t\t\timem[0] <= i_data;\n"
|
487 |
|
|
"\t\t\timem[1] <= imem[0];\n"
|
488 |
28 |
dgisselq |
"\t\tend\n"
|
489 |
36 |
dgisselq |
"\n\n");
|
490 |
|
|
fprintf(fp,
|
491 |
|
|
"\t// Note that we don\'t check on wait_for_sync or i_sync here.\n"
|
492 |
|
|
"\t// Why not? Because iaddr will always be zero until after the\n"
|
493 |
|
|
"\t// first i_ce, so we are safe.\n"
|
494 |
|
|
"\tinitial pipeline = 3\'h0;\n");
|
495 |
2 |
dgisselq |
|
496 |
36 |
dgisselq |
if (async_reset)
|
497 |
|
|
fprintf(fp,
|
498 |
|
|
"\talways\t@(posedge i_clk, negedge i_areset_n)\n"
|
499 |
|
|
"\t\tif (!i_reset)\n");
|
500 |
|
|
else
|
501 |
|
|
fprintf(fp,
|
502 |
|
|
"\talways\t@(posedge i_clk)\n"
|
503 |
|
|
"\t\tif (i_reset)\n");
|
504 |
2 |
dgisselq |
|
505 |
|
|
fprintf(fp,
|
506 |
36 |
dgisselq |
"\t\t\tpipeline <= 3\'h0;\n"
|
507 |
|
|
"\t\telse if (i_ce) // is our pipeline process full? Which stages?\n"
|
508 |
|
|
"\t\t\tpipeline <= { pipeline[1:0], iaddr[1] };\n\n");
|
509 |
|
|
fprintf(fp,
|
510 |
|
|
"\t// This is the pipeline[-1] stage, pipeline[0] will be set next.\n"
|
511 |
|
|
"\talways\t@(posedge i_clk)\n"
|
512 |
|
|
"\t\tif ((i_ce)&&(iaddr[1]))\n"
|
513 |
|
|
"\t\tbegin\n"
|
514 |
|
|
"\t\t\tsum_r <= imem_r + i_data_r;\n"
|
515 |
|
|
"\t\t\tsum_i <= imem_i + i_data_i;\n"
|
516 |
|
|
"\t\t\tdiff_r <= imem_r - i_data_r;\n"
|
517 |
|
|
"\t\t\tdiff_i <= imem_i - i_data_i;\n"
|
518 |
|
|
"\t\tend\n\n");
|
519 |
|
|
fprintf(fp,
|
520 |
|
|
"\t// pipeline[1] takes sum_x and diff_x and produces rnd_x\n\n");
|
521 |
2 |
dgisselq |
|
522 |
33 |
dgisselq |
fprintf(fp,
|
523 |
36 |
dgisselq |
"\t// Now for pipeline[2]. We can actually do this at all i_ce\n"
|
524 |
|
|
"\t// clock times, since nothing will listen unless pipeline[3]\n"
|
525 |
|
|
"\t// on the next clock. Thus, we simplify this logic and do\n"
|
526 |
|
|
"\t// it independent of pipeline[2].\n"
|
527 |
|
|
"\talways\t@(posedge i_clk)\n"
|
528 |
2 |
dgisselq |
"\t\tif (i_ce)\n"
|
529 |
|
|
"\t\tbegin\n"
|
530 |
36 |
dgisselq |
"\t\t\tob_a <= { rnd_sum_r, rnd_sum_i };\n"
|
531 |
|
|
"\t\t\t// on Even, W = e^{-j2pi 1/4 0} = 1\n"
|
532 |
|
|
"\t\t\tif (!iaddr[0])\n"
|
533 |
|
|
"\t\t\tbegin\n"
|
534 |
|
|
"\t\t\t\tob_b_r <= rnd_diff_r;\n"
|
535 |
|
|
"\t\t\t\tob_b_i <= rnd_diff_i;\n"
|
536 |
|
|
"\t\t\tend else if (INVERSE==0) begin\n"
|
537 |
|
|
"\t\t\t\t// on Odd, W = e^{-j2pi 1/4} = -j\n"
|
538 |
|
|
"\t\t\t\tob_b_r <= rnd_diff_i;\n"
|
539 |
|
|
"\t\t\t\tob_b_i <= n_rnd_diff_r;\n"
|
540 |
|
|
"\t\t\tend else begin\n"
|
541 |
|
|
"\t\t\t\t// on Odd, W = e^{j2pi 1/4} = j\n"
|
542 |
|
|
"\t\t\t\tob_b_r <= n_rnd_diff_i;\n"
|
543 |
|
|
"\t\t\t\tob_b_i <= rnd_diff_r;\n"
|
544 |
|
|
"\t\t\tend\n"
|
545 |
|
|
"\t\tend\n\n");
|
546 |
|
|
fprintf(fp,
|
547 |
|
|
"\talways\t@(posedge i_clk)\n"
|
548 |
2 |
dgisselq |
"\t\tif (i_ce)\n"
|
549 |
36 |
dgisselq |
"\t\tbegin // In sequence, clock = 3\n"
|
550 |
|
|
"\t\t\tomem[0] <= ob_b;\n"
|
551 |
|
|
"\t\t\tomem[1] <= omem[0];\n"
|
552 |
|
|
"\t\t\tif (pipeline[2])\n"
|
553 |
|
|
"\t\t\t\to_data <= ob_a;\n"
|
554 |
|
|
"\t\t\telse\n"
|
555 |
|
|
"\t\t\t\to_data <= omem[1];\n"
|
556 |
|
|
"\t\tend\n\n");
|
557 |
2 |
dgisselq |
|
558 |
36 |
dgisselq |
fprintf(fp,
|
559 |
|
|
"\tinitial\to_sync = 1\'b0;\n");
|
560 |
2 |
dgisselq |
|
561 |
36 |
dgisselq |
if (async_reset)
|
562 |
|
|
fprintf(fp,
|
563 |
|
|
"\talways\t@(posedge i_clk, negedge i_areset_n)\n"
|
564 |
|
|
"\t\tif (!i_areset_n)\n");
|
565 |
|
|
else
|
566 |
|
|
fprintf(fp,
|
567 |
|
|
"\talways\t@(posedge i_clk)\n"
|
568 |
|
|
"\t\tif (i_reset)\n");
|
569 |
29 |
dgisselq |
fprintf(fp,
|
570 |
36 |
dgisselq |
"\t\t\to_sync <= 1\'b0;\n"
|
571 |
|
|
"\t\telse if (i_ce)\n"
|
572 |
|
|
"\t\t\to_sync <= (iaddr[2:0] == 3'b101);\n\n");
|
573 |
29 |
dgisselq |
|
574 |
36 |
dgisselq |
if (formal_property_flag) {
|
575 |
|
|
fprintf(fp,
|
576 |
|
|
"`ifdef FORMAL\n"
|
577 |
|
|
"\treg f_past_valid;\n"
|
578 |
|
|
"\tinitial f_past_valid = 1'b0;\n"
|
579 |
|
|
"\talways @(posedge i_clk)\n"
|
580 |
|
|
"\t f_past_valid = 1'b1;\n"
|
581 |
29 |
dgisselq |
"\n"
|
582 |
36 |
dgisselq |
"`ifdef QTRSTAGE\n"
|
583 |
|
|
"\talways @(posedge i_clk)\n"
|
584 |
|
|
"\t assume((i_ce)||($past(i_ce))||($past(i_ce,2)));\n"
|
585 |
|
|
"`endif\n"
|
586 |
29 |
dgisselq |
"\n"
|
587 |
36 |
dgisselq |
"\t// The below logic only works if the rounding stage does nothing\n"
|
588 |
|
|
"\tinitial assert(IWIDTH+1 == OWIDTH);\n"
|
589 |
29 |
dgisselq |
"\n"
|
590 |
36 |
dgisselq |
"\treg signed [IWIDTH-1:0] f_piped_real [0:7];\n"
|
591 |
|
|
"\treg signed [IWIDTH-1:0] f_piped_imag [0:7];\n"
|
592 |
29 |
dgisselq |
"\n"
|
593 |
36 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
594 |
|
|
"\tif (i_ce)\n"
|
595 |
|
|
"\tbegin\n"
|
596 |
|
|
"\t f_piped_real[0] <= i_data[2*IWIDTH-1:IWIDTH];\n"
|
597 |
|
|
"\t f_piped_imag[0] <= i_data[ IWIDTH-1:0];\n"
|
598 |
29 |
dgisselq |
"\n"
|
599 |
36 |
dgisselq |
"\t f_piped_real[1] <= f_piped_real[0];\n"
|
600 |
|
|
"\t f_piped_imag[1] <= f_piped_imag[0];\n"
|
601 |
29 |
dgisselq |
"\n"
|
602 |
36 |
dgisselq |
"\t f_piped_real[2] <= f_piped_real[1];\n"
|
603 |
|
|
"\t f_piped_imag[2] <= f_piped_imag[1];\n"
|
604 |
29 |
dgisselq |
"\n"
|
605 |
36 |
dgisselq |
"\t f_piped_real[3] <= f_piped_real[2];\n"
|
606 |
|
|
"\t f_piped_imag[3] <= f_piped_imag[2];\n"
|
607 |
29 |
dgisselq |
"\n"
|
608 |
36 |
dgisselq |
"\t f_piped_real[4] <= f_piped_real[3];\n"
|
609 |
|
|
"\t f_piped_imag[4] <= f_piped_imag[3];\n"
|
610 |
29 |
dgisselq |
"\n"
|
611 |
36 |
dgisselq |
"\t f_piped_real[5] <= f_piped_real[4];\n"
|
612 |
|
|
"\t f_piped_imag[5] <= f_piped_imag[4];\n"
|
613 |
29 |
dgisselq |
"\n"
|
614 |
36 |
dgisselq |
"\t f_piped_real[6] <= f_piped_real[5];\n"
|
615 |
|
|
"\t f_piped_imag[6] <= f_piped_imag[5];\n"
|
616 |
29 |
dgisselq |
"\n"
|
617 |
36 |
dgisselq |
"\t f_piped_real[7] <= f_piped_real[6];\n"
|
618 |
|
|
"\t f_piped_imag[7] <= f_piped_imag[6];\n"
|
619 |
|
|
"\tend\n"
|
620 |
29 |
dgisselq |
"\n"
|
621 |
36 |
dgisselq |
"\treg f_rsyncd;\n"
|
622 |
|
|
"\twire f_syncd;\n"
|
623 |
29 |
dgisselq |
"\n"
|
624 |
36 |
dgisselq |
"\tinitial f_rsyncd = 0;\n"
|
625 |
29 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
626 |
36 |
dgisselq |
"\tif(i_reset)\n"
|
627 |
|
|
"\t f_rsyncd <= 1'b0;\n"
|
628 |
|
|
"\telse if (!f_rsyncd)\n"
|
629 |
|
|
"\t f_rsyncd <= (o_sync);\n"
|
630 |
|
|
"\tassign f_syncd = (f_rsyncd)||(o_sync);\n"
|
631 |
29 |
dgisselq |
"\n"
|
632 |
36 |
dgisselq |
"\treg [1:0] f_state;\n"
|
633 |
35 |
dgisselq |
"\n"
|
634 |
2 |
dgisselq |
"\n"
|
635 |
36 |
dgisselq |
"\tinitial f_state = 0;\n"
|
636 |
|
|
"\talways @(posedge i_clk)\n"
|
637 |
|
|
"\tif (i_reset)\n"
|
638 |
|
|
"\t f_state <= 0;\n"
|
639 |
|
|
"\telse if ((i_ce)&&((!wait_for_sync)||(i_sync)))\n"
|
640 |
|
|
"\t f_state <= f_state + 1;\n"
|
641 |
2 |
dgisselq |
"\n"
|
642 |
36 |
dgisselq |
"\talways @(*)\n"
|
643 |
|
|
"\tif (f_state != 0)\n"
|
644 |
|
|
"\t assume(!i_sync);\n"
|
645 |
2 |
dgisselq |
"\n"
|
646 |
5 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
647 |
36 |
dgisselq |
"\t assert(f_state[1:0] == iaddr[1:0]);\n"
|
648 |
2 |
dgisselq |
"\n"
|
649 |
36 |
dgisselq |
"\twire signed [2*IWIDTH-1:0] f_i_real, f_i_imag;\n"
|
650 |
|
|
"\tassign f_i_real = i_data[2*IWIDTH-1:IWIDTH];\n"
|
651 |
|
|
"\tassign f_i_imag = i_data[ IWIDTH-1:0];\n"
|
652 |
26 |
dgisselq |
"\n"
|
653 |
36 |
dgisselq |
"\twire signed [OWIDTH-1:0] f_o_real, f_o_imag;\n"
|
654 |
|
|
"\tassign f_o_real = o_data[2*OWIDTH-1:OWIDTH];\n"
|
655 |
|
|
"\tassign f_o_imag = o_data[ OWIDTH-1:0];\n"
|
656 |
|
|
"\n"
|
657 |
26 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
658 |
36 |
dgisselq |
"\tif (f_state == 2'b11)\n"
|
659 |
|
|
"\tbegin\n"
|
660 |
|
|
"\t assume(f_piped_real[0] != 3'sb100);\n"
|
661 |
|
|
"\t assume(f_piped_real[2] != 3'sb100);\n"
|
662 |
|
|
"\t assert(sum_r == f_piped_real[2] + f_piped_real[0]);\n"
|
663 |
|
|
"\t assert(sum_i == f_piped_imag[2] + f_piped_imag[0]);\n"
|
664 |
26 |
dgisselq |
"\n"
|
665 |
36 |
dgisselq |
"\t assert(diff_r == f_piped_real[2] - f_piped_real[0]);\n"
|
666 |
|
|
"\t assert(diff_i == f_piped_imag[2] - f_piped_imag[0]);\n"
|
667 |
|
|
"\tend\n"
|
668 |
26 |
dgisselq |
"\n"
|
669 |
36 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
670 |
|
|
"\tif ((f_state == 2'b00)&&((f_syncd)||(iaddr >= 4)))\n"
|
671 |
|
|
"\tbegin\n"
|
672 |
|
|
"\t assert(rnd_sum_r == f_piped_real[3]+f_piped_real[1]);\n"
|
673 |
|
|
"\t assert(rnd_sum_i == f_piped_imag[3]+f_piped_imag[1]);\n"
|
674 |
|
|
"\t assert(rnd_diff_r == f_piped_real[3]-f_piped_real[1]);\n"
|
675 |
|
|
"\t assert(rnd_diff_i == f_piped_imag[3]-f_piped_imag[1]);\n"
|
676 |
|
|
"\tend\n"
|
677 |
26 |
dgisselq |
"\n"
|
678 |
|
|
"\talways @(posedge i_clk)\n"
|
679 |
36 |
dgisselq |
"\tif ((f_state == 2'b10)&&(f_syncd))\n"
|
680 |
|
|
"\tbegin\n"
|
681 |
|
|
"\t // assert(o_sync);\n"
|
682 |
|
|
"\t assert(f_o_real == f_piped_real[5] + f_piped_real[3]);\n"
|
683 |
|
|
"\t assert(f_o_imag == f_piped_imag[5] + f_piped_imag[3]);\n"
|
684 |
|
|
"\tend\n"
|
685 |
|
|
"\n"
|
686 |
26 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
687 |
36 |
dgisselq |
"\tif ((f_state == 2'b11)&&(f_syncd))\n"
|
688 |
|
|
"\tbegin\n"
|
689 |
|
|
"\t assert(!o_sync);\n"
|
690 |
|
|
"\t assert(f_o_real == f_piped_real[5] + f_piped_real[3]);\n"
|
691 |
|
|
"\t assert(f_o_imag == f_piped_imag[5] + f_piped_imag[3]);\n"
|
692 |
|
|
"\tend\n"
|
693 |
26 |
dgisselq |
"\n"
|
694 |
|
|
"\talways @(posedge i_clk)\n"
|
695 |
36 |
dgisselq |
"\tif ((f_state == 2'b00)&&(f_syncd))\n"
|
696 |
|
|
"\tbegin\n"
|
697 |
|
|
"\t assert(!o_sync);\n"
|
698 |
|
|
"\t assert(f_o_real == f_piped_real[7] - f_piped_real[5]);\n"
|
699 |
|
|
"\t assert(f_o_imag == f_piped_imag[7] - f_piped_imag[5]);\n"
|
700 |
|
|
"\tend\n"
|
701 |
26 |
dgisselq |
"\n"
|
702 |
36 |
dgisselq |
"\talways @(*)\n"
|
703 |
|
|
"\tif ((iaddr[2:0] == 0)&&(!wait_for_sync))\n"
|
704 |
|
|
"\t assume(i_sync);\n"
|
705 |
26 |
dgisselq |
"\n"
|
706 |
36 |
dgisselq |
"\talways @(*)\n"
|
707 |
|
|
"\tif (wait_for_sync)\n"
|
708 |
|
|
"\t assert((iaddr == 0)&&(f_state == 2'b00)&&(!o_sync)&&(!f_rsyncd));\n"
|
709 |
2 |
dgisselq |
"\n"
|
710 |
|
|
"\talways @(posedge i_clk)\n"
|
711 |
36 |
dgisselq |
"\tif ((f_past_valid)&&($past(i_ce))&&($past(i_sync))&&(!$past(i_reset)))\n"
|
712 |
|
|
"\t assert(!wait_for_sync);\n"
|
713 |
14 |
dgisselq |
"\n"
|
714 |
26 |
dgisselq |
"\talways @(posedge i_clk)\n"
|
715 |
36 |
dgisselq |
"\tif ((f_state == 2'b01)&&(f_syncd))\n"
|
716 |
2 |
dgisselq |
"\tbegin\n"
|
717 |
36 |
dgisselq |
"\t assert(!o_sync);\n"
|
718 |
|
|
"\t if (INVERSE)\n"
|
719 |
|
|
"\t begin\n"
|
720 |
|
|
"\t assert(f_o_real == -f_piped_imag[7]+f_piped_imag[5]);\n"
|
721 |
|
|
"\t assert(f_o_imag == f_piped_real[7]-f_piped_real[5]);\n"
|
722 |
|
|
"\t end else begin\n"
|
723 |
|
|
"\t assert(f_o_real == f_piped_imag[7]-f_piped_imag[5]);\n"
|
724 |
|
|
"\t assert(f_o_imag == -f_piped_real[7]+f_piped_real[5]);\n"
|
725 |
|
|
"\t end\n"
|
726 |
2 |
dgisselq |
"\tend\n"
|
727 |
|
|
"\n"
|
728 |
36 |
dgisselq |
"`endif\n");
|
729 |
|
|
}
|
730 |
23 |
dgisselq |
|
731 |
36 |
dgisselq |
fprintf(fp, "endmodule\n");
|
732 |
|
|
}
|
733 |
26 |
dgisselq |
|
734 |
24 |
dgisselq |
|
735 |
36 |
dgisselq |
void build_sngllast(const char *fname, const bool async_reset = false) {
|
736 |
22 |
dgisselq |
FILE *fp = fopen(fname, "w");
|
737 |
|
|
if (NULL == fp) {
|
738 |
|
|
fprintf(stderr, "Could not open \'%s\' for writing\n", fname);
|
739 |
|
|
perror("O/S Err was:");
|
740 |
|
|
return;
|
741 |
|
|
}
|
742 |
|
|
|
743 |
36 |
dgisselq |
std::string resetw("i_reset");
|
744 |
|
|
if (async_reset)
|
745 |
|
|
resetw = std::string("i_areset_n");
|
746 |
23 |
dgisselq |
|
747 |
22 |
dgisselq |
fprintf(fp,
|
748 |
36 |
dgisselq |
SLASHLINE
|
749 |
22 |
dgisselq |
"//\n"
|
750 |
36 |
dgisselq |
"// Filename:\tlaststage.v\n"
|
751 |
22 |
dgisselq |
"//\n"
|
752 |
|
|
"// Project: %s\n"
|
753 |
|
|
"//\n"
|
754 |
36 |
dgisselq |
"// Purpose: This is part of an FPGA implementation that will process\n"
|
755 |
|
|
"// the final stage of a decimate-in-frequency FFT, running\n"
|
756 |
|
|
"// through the data at one sample per clock.\n"
|
757 |
22 |
dgisselq |
"//\n"
|
758 |
|
|
"//\n%s"
|
759 |
|
|
"//\n", prjname, creator);
|
760 |
|
|
fprintf(fp, "%s", cpyleft);
|
761 |
35 |
dgisselq |
fprintf(fp, "//\n//\n`default_nettype\tnone\n//\n");
|
762 |
36 |
dgisselq |
|
763 |
22 |
dgisselq |
fprintf(fp,
|
764 |
36 |
dgisselq |
"module laststage(i_clk, %s, i_ce, i_sync, i_val, o_val, o_sync);\n"
|
765 |
|
|
" parameter IWIDTH=16,OWIDTH=IWIDTH+1, SHIFT=0;\n"
|
766 |
37 |
dgisselq |
" input wire i_clk, %s, i_ce, i_sync;\n"
|
767 |
|
|
" input wire [(2*IWIDTH-1):0] i_val;\n"
|
768 |
36 |
dgisselq |
" output wire [(2*OWIDTH-1):0] o_val;\n"
|
769 |
|
|
" output reg o_sync;\n\n",
|
770 |
|
|
resetw.c_str(), resetw.c_str());
|
771 |
|
|
|
772 |
22 |
dgisselq |
fprintf(fp,
|
773 |
36 |
dgisselq |
" reg signed [(IWIDTH-1):0] m_r, m_i;\n"
|
774 |
|
|
" wire signed [(IWIDTH-1):0] i_r, i_i;\n"
|
775 |
22 |
dgisselq |
"\n"
|
776 |
36 |
dgisselq |
" assign i_r = i_val[(2*IWIDTH-1):(IWIDTH)]; \n"
|
777 |
|
|
" assign i_i = i_val[(IWIDTH-1):0]; \n"
|
778 |
22 |
dgisselq |
"\n"
|
779 |
36 |
dgisselq |
" // Don't forget that we accumulate a bit by adding two values\n"
|
780 |
|
|
" // together. Therefore our intermediate value must have one more\n"
|
781 |
|
|
" // bit than the two originals.\n"
|
782 |
|
|
" reg signed [(IWIDTH):0] rnd_r, rnd_i, sto_r, sto_i;\n"
|
783 |
|
|
" reg wait_for_sync, stage;\n"
|
784 |
|
|
" reg [1:0] sync_pipe;\n"
|
785 |
22 |
dgisselq |
"\n"
|
786 |
36 |
dgisselq |
" initial wait_for_sync = 1'b1;\n"
|
787 |
|
|
" initial stage = 1'b0;\n");
|
788 |
22 |
dgisselq |
|
789 |
36 |
dgisselq |
if (async_reset)
|
790 |
|
|
fprintf(fp, "\talways @(posedge i_clk, negedge i_areset_n)\n\t\tif (!i_areset_n)\n");
|
791 |
|
|
else
|
792 |
|
|
fprintf(fp, "\talways @(posedge i_clk)\n\t\tif (i_reset)\n");
|
793 |
33 |
dgisselq |
fprintf(fp,
|
794 |
36 |
dgisselq |
" begin\n"
|
795 |
|
|
" wait_for_sync <= 1'b1;\n"
|
796 |
|
|
" stage <= 1'b0;\n"
|
797 |
|
|
" end else if ((i_ce)&&((!wait_for_sync)||(i_sync))&&(!stage))\n"
|
798 |
|
|
" begin\n"
|
799 |
|
|
" wait_for_sync <= 1'b0;\n"
|
800 |
|
|
" //\n"
|
801 |
|
|
" stage <= 1'b1;\n"
|
802 |
|
|
" //\n"
|
803 |
|
|
" end else if (i_ce)\n"
|
804 |
|
|
" stage <= 1'b0;\n\n");
|
805 |
22 |
dgisselq |
|
806 |
36 |
dgisselq |
fprintf(fp, "\tinitial\tsync_pipe = 0;\n");
|
807 |
|
|
if (async_reset)
|
808 |
|
|
fprintf(fp,
|
809 |
|
|
"\talways @(posedge i_clk, negedge i_areset_n)\n"
|
810 |
|
|
"\tif (!i_areset_n)\n");
|
811 |
|
|
else
|
812 |
|
|
fprintf(fp,
|
813 |
|
|
"\talways @(posedge i_clk)\n"
|
814 |
|
|
"\tif (i_reset)\n");
|
815 |
|
|
|
816 |
22 |
dgisselq |
fprintf(fp,
|
817 |
36 |
dgisselq |
"\t\tsync_pipe <= 0;\n"
|
818 |
|
|
"\telse if (i_ce)\n"
|
819 |
|
|
"\t\tsync_pipe <= { sync_pipe[0], i_sync };\n\n");
|
820 |
23 |
dgisselq |
|
821 |
36 |
dgisselq |
fprintf(fp, "\tinitial\to_sync = 1\'b0;\n");
|
822 |
|
|
if (async_reset)
|
823 |
|
|
fprintf(fp,
|
824 |
|
|
"\talways @(posedge i_clk, negedge i_areset_n)\n"
|
825 |
|
|
"\tif (!i_areset_n)\n");
|
826 |
|
|
else
|
827 |
|
|
fprintf(fp,
|
828 |
|
|
"\talways @(posedge i_clk)\n"
|
829 |
|
|
"\tif (i_reset)\n");
|
830 |
|
|
|
831 |
23 |
dgisselq |
fprintf(fp,
|
832 |
36 |
dgisselq |
"\t\to_sync <= 1\'b0;\n"
|
833 |
|
|
"\telse if (i_ce)\n"
|
834 |
|
|
"\t\to_sync <= sync_pipe[1];\n\n");
|
835 |
22 |
dgisselq |
|
836 |
|
|
fprintf(fp,
|
837 |
36 |
dgisselq |
" always @(posedge i_clk)\n"
|
838 |
|
|
" if (i_ce)\n"
|
839 |
|
|
" begin\n"
|
840 |
|
|
" if (!stage)\n"
|
841 |
|
|
" begin\n"
|
842 |
|
|
" // Clock 1\n"
|
843 |
|
|
" m_r <= i_r;\n"
|
844 |
|
|
" m_i <= i_i;\n"
|
845 |
|
|
" // Clock 3\n"
|
846 |
|
|
" rnd_r <= sto_r;\n"
|
847 |
|
|
" rnd_i <= sto_i;\n"
|
848 |
|
|
" //\n"
|
849 |
|
|
" end else begin\n"
|
850 |
|
|
" // Clock 2\n"
|
851 |
|
|
" rnd_r <= m_r + i_r;\n"
|
852 |
|
|
" rnd_i <= m_i + i_i;\n"
|
853 |
|
|
" //\n"
|
854 |
|
|
" sto_r <= m_r - i_r;\n"
|
855 |
|
|
" sto_i <= m_i - i_i;\n"
|
856 |
|
|
" //\n"
|
857 |
|
|
" end\n"
|
858 |
|
|
" end\n"
|
859 |
22 |
dgisselq |
"\n"
|
860 |
36 |
dgisselq |
" // Now that we have our results, let's round them and report them\n"
|
861 |
|
|
" wire signed [(OWIDTH-1):0] o_r, o_i;\n"
|
862 |
2 |
dgisselq |
"\n"
|
863 |
36 |
dgisselq |
" convround #(IWIDTH+1,OWIDTH,SHIFT) do_rnd_r(i_clk, i_ce, rnd_r, o_r);\n"
|
864 |
|
|
" convround #(IWIDTH+1,OWIDTH,SHIFT) do_rnd_i(i_clk, i_ce, rnd_i, o_i);\n"
|
865 |
2 |
dgisselq |
"\n"
|
866 |
36 |
dgisselq |
" assign o_val = { o_r, o_i };\n"
|
867 |
|
|
"\n");
|
868 |
2 |
dgisselq |
|
869 |
14 |
dgisselq |
|
870 |
36 |
dgisselq |
if (formal_property_flag) {
|
871 |
|
|
fprintf(fp,
|
872 |
|
|
"`ifdef FORMAL\n"
|
873 |
|
|
"\treg f_past_valid;\n"
|
874 |
|
|
"\tinitial f_past_valid = 1'b0;\n"
|
875 |
|
|
"\talways @(posedge i_clk)\n"
|
876 |
|
|
"\t f_past_valid <= 1'b1;\n"
|
877 |
|
|
"\n"
|
878 |
|
|
"`ifdef LASTSTAGE\n"
|
879 |
|
|
"\talways @(posedge i_clk)\n"
|
880 |
|
|
"\t assume((i_ce)||($past(i_ce))||($past(i_ce,2)));\n"
|
881 |
|
|
"`endif\n"
|
882 |
|
|
"\n"
|
883 |
|
|
"\tinitial assert(IWIDTH+1 == OWIDTH);\n"
|
884 |
|
|
"\n"
|
885 |
|
|
"\treg signed [IWIDTH-1:0] f_piped_real [0:3];\n"
|
886 |
|
|
"\treg signed [IWIDTH-1:0] f_piped_imag [0:3];\n"
|
887 |
|
|
"\talways @(posedge i_clk)\n"
|
888 |
|
|
"\tif (i_ce)\n"
|
889 |
|
|
"\tbegin\n"
|
890 |
|
|
"\t f_piped_real[0] <= i_val[2*IWIDTH-1:IWIDTH];\n"
|
891 |
|
|
"\t f_piped_imag[0] <= i_val[ IWIDTH-1:0];\n"
|
892 |
|
|
"\n"
|
893 |
|
|
"\t f_piped_real[1] <= f_piped_real[0];\n"
|
894 |
|
|
"\t f_piped_imag[1] <= f_piped_imag[0];\n"
|
895 |
|
|
"\n"
|
896 |
|
|
"\t f_piped_real[2] <= f_piped_real[1];\n"
|
897 |
|
|
"\t f_piped_imag[2] <= f_piped_imag[1];\n"
|
898 |
|
|
"\n"
|
899 |
|
|
"\t f_piped_real[3] <= f_piped_real[2];\n"
|
900 |
|
|
"\t f_piped_imag[3] <= f_piped_imag[2];\n"
|
901 |
|
|
"\tend\n"
|
902 |
|
|
"\n"
|
903 |
|
|
"\twire f_syncd;\n"
|
904 |
|
|
"\treg f_rsyncd;\n"
|
905 |
|
|
"\n"
|
906 |
|
|
"\tinitial f_rsyncd = 0;\n"
|
907 |
|
|
"\talways @(posedge i_clk)\n"
|
908 |
|
|
"\tif (i_reset)\n"
|
909 |
|
|
"\t f_rsyncd <= 1'b0;\n"
|
910 |
|
|
"\telse if (!f_rsyncd)\n"
|
911 |
|
|
"\t f_rsyncd <= o_sync;\n"
|
912 |
|
|
"\tassign f_syncd = (f_rsyncd)||(o_sync);\n"
|
913 |
|
|
"\n"
|
914 |
|
|
"\treg f_state;\n"
|
915 |
|
|
"\tinitial f_state = 0;\n"
|
916 |
|
|
"\talways @(posedge i_clk)\n"
|
917 |
|
|
"\tif (i_reset)\n"
|
918 |
|
|
"\t f_state <= 0;\n"
|
919 |
|
|
"\telse if ((i_ce)&&((!wait_for_sync)||(i_sync)))\n"
|
920 |
|
|
"\t f_state <= f_state + 1;\n"
|
921 |
|
|
"\n"
|
922 |
|
|
"\talways @(*)\n"
|
923 |
|
|
"\tif (f_state != 0)\n"
|
924 |
|
|
"\t assume(!i_sync);\n"
|
925 |
|
|
"\n"
|
926 |
|
|
"\talways @(*)\n"
|
927 |
|
|
"\t assert(stage == f_state[0]);\n"
|
928 |
|
|
"\n"
|
929 |
|
|
"\talways @(posedge i_clk)\n"
|
930 |
|
|
"\tif ((f_state == 1'b1)&&(f_syncd))\n"
|
931 |
|
|
"\tbegin\n"
|
932 |
|
|
"\t assert(o_r == f_piped_real[2] + f_piped_real[1]);\n"
|
933 |
|
|
"\t assert(o_i == f_piped_imag[2] + f_piped_imag[1]);\n"
|
934 |
|
|
"\tend\n"
|
935 |
|
|
"\n"
|
936 |
|
|
"\talways @(posedge i_clk)\n"
|
937 |
|
|
"\tif ((f_state == 1'b0)&&(f_syncd))\n"
|
938 |
|
|
"\tbegin\n"
|
939 |
|
|
"\t assert(!o_sync);\n"
|
940 |
|
|
"\t assert(o_r == f_piped_real[3] - f_piped_real[2]);\n"
|
941 |
|
|
"\t assert(o_i == f_piped_imag[3] - f_piped_imag[2]);\n"
|
942 |
|
|
"\tend\n"
|
943 |
|
|
"\n"
|
944 |
|
|
"\talways @(*)\n"
|
945 |
|
|
"\tif (wait_for_sync)\n"
|
946 |
|
|
"\tbegin\n"
|
947 |
|
|
"\t assert(!f_rsyncd);\n"
|
948 |
|
|
"\t assert(!o_sync);\n"
|
949 |
|
|
"\t assert(f_state == 0);\n"
|
950 |
|
|
"\tend\n\n");
|
951 |
2 |
dgisselq |
}
|
952 |
|
|
|
953 |
36 |
dgisselq |
fprintf(fp,
|
954 |
|
|
"`endif // FORMAL\n"
|
955 |
|
|
"endmodule\n");
|
956 |
23 |
dgisselq |
|
957 |
36 |
dgisselq |
fclose(fp);
|
958 |
2 |
dgisselq |
}
|
959 |
|
|
|
960 |
|
|
void usage(void) {
|
961 |
|
|
fprintf(stderr,
|
962 |
26 |
dgisselq |
"USAGE:\tfftgen [-f <size>] [-d dir] [-c cbits] [-n nbits] [-m mxbits] [-s]\n"
|
963 |
2 |
dgisselq |
// "\tfftgen -i\n"
|
964 |
36 |
dgisselq |
"\t-1\tBuild a normal FFT, running at one clock per complex sample, or\n"
|
965 |
|
|
"\t\t(for a real FFT) at one clock per two real input samples.\n"
|
966 |
|
|
"\t-a <hdrname> Create a header of information describing the built-in\n"
|
967 |
|
|
"\t\tparameters, useful for module-level testing with Verilator\n"
|
968 |
2 |
dgisselq |
"\t-c <cbits>\tCauses all internal complex coefficients to be\n"
|
969 |
|
|
"\t\tlonger than the corresponding data bits, to help avoid\n"
|
970 |
32 |
dgisselq |
"\t\tcoefficient truncation errors. The default is %d bits longer\n"
|
971 |
26 |
dgisselq |
"\t\tthan the data bits.\n"
|
972 |
36 |
dgisselq |
"\t-d <dir> Places all of the generated verilog files into <dir>.\n"
|
973 |
|
|
"\t\tThe default is a subdirectory of the current directory\n"
|
974 |
|
|
"\t\tnamed %s.\n"
|
975 |
|
|
"\t-f <size> Sets the size of the FFT as the number of complex\n"
|
976 |
26 |
dgisselq |
"\t\tsamples input to the transform. (No default value, this is\n"
|
977 |
|
|
"\t\ta required parameter.)\n"
|
978 |
|
|
"\t-i\tAn inverse FFT, meaning that the coefficients are\n"
|
979 |
|
|
"\t\tgiven by e^{ j 2 pi k/N n }. The default is a forward FFT, with\n"
|
980 |
|
|
"\t\tcoefficients given by e^{ -j 2 pi k/N n }.\n"
|
981 |
36 |
dgisselq |
"\t-k #\tSets # clocks per sample, used to minimize multiplies. Also\n"
|
982 |
|
|
"\t\tsets one sample in per i_ce clock (opt -1)\n"
|
983 |
2 |
dgisselq |
"\t-m <mxbits>\tSets the maximum bit width that the FFT should ever\n"
|
984 |
|
|
"\t\tproduce. Internal values greater than this value will be\n"
|
985 |
26 |
dgisselq |
"\t\ttruncated to this value. (The default value grows the input\n"
|
986 |
|
|
"\t\tsize by one bit for every two FFT stages.)\n"
|
987 |
22 |
dgisselq |
"\t-n <nbits>\tSets the bitwidth for values coming into the (i)FFT.\n"
|
988 |
26 |
dgisselq |
"\t\tThe default is %d bits input for each component of the two\n"
|
989 |
|
|
"\t\tcomplex values into the FFT.\n"
|
990 |
36 |
dgisselq |
"\t-p <nmpy> Sets the number of hardware multiplies (DSPs) to use, versus\n"
|
991 |
|
|
"\t\tshift-add emulation. The default is not to use any hardware\n"
|
992 |
|
|
"\t\tmultipliers.\n"
|
993 |
26 |
dgisselq |
"\t-r\tBuild a real-FFT at four input points per sample, rather than a\n"
|
994 |
|
|
"\t\tcomplex FFT. (Default is a Complex FFT.)\n"
|
995 |
37 |
dgisselq |
"\t\tThis option is a place-holder. The real-FFT has not (yet) been\n"
|
996 |
|
|
"\t\timplemented.\n"
|
997 |
2 |
dgisselq |
"\t-s\tSkip the final bit reversal stage. This is useful in\n"
|
998 |
|
|
"\t\talgorithms that need to apply a filter without needing to do\n"
|
999 |
|
|
"\t\tbin shifting, as these algorithms can, with this option, just\n"
|
1000 |
|
|
"\t\tmultiply by a bit reversed correlation sequence and then\n"
|
1001 |
22 |
dgisselq |
"\t\tinverse FFT the (still bit reversed) result. (You would need\n"
|
1002 |
|
|
"\t\ta decimation in time inverse to do this, which this program does\n"
|
1003 |
|
|
"\t\tnot yet provide.)\n"
|
1004 |
2 |
dgisselq |
"\t-S\tInclude the final bit reversal stage (default).\n"
|
1005 |
22 |
dgisselq |
"\t-x <xtrabits>\tUse this many extra bits internally, before any final\n"
|
1006 |
36 |
dgisselq |
"\t\trounding or truncation of the answer to the final number of\n"
|
1007 |
|
|
"\t\tbits. The default is to use %d extra bits internally.\n",
|
1008 |
26 |
dgisselq |
/*
|
1009 |
2 |
dgisselq |
"\t-0\tA forward FFT (default), meaning that the coefficients are\n"
|
1010 |
|
|
"\t\tgiven by e^{-j 2 pi k/N n }.\n"
|
1011 |
|
|
"\t-1\tAn inverse FFT, meaning that the coefficients are\n"
|
1012 |
26 |
dgisselq |
"\t\tgiven by e^{ j 2 pi k/N n }.\n",
|
1013 |
|
|
*/
|
1014 |
|
|
DEF_XTRACBITS, DEF_COREDIR, DEF_NBITSIN, DEF_XTRAPBITS);
|
1015 |
2 |
dgisselq |
}
|
1016 |
|
|
|
1017 |
|
|
// Features still needed:
|
1018 |
|
|
// Interactivity.
|
1019 |
|
|
int main(int argc, char **argv) {
|
1020 |
|
|
int fftsize = -1, lgsize = -1;
|
1021 |
26 |
dgisselq |
int nbitsin = DEF_NBITSIN, xtracbits = DEF_XTRACBITS,
|
1022 |
36 |
dgisselq |
nummpy=DEF_NMPY, nmpypstage=6, mpy_stages;
|
1023 |
|
|
int nbitsout, maxbitsout = -1, xtrapbits=DEF_XTRAPBITS, ckpce = 0;
|
1024 |
|
|
const char *EMPTYSTR = "";
|
1025 |
26 |
dgisselq |
bool bitreverse = true, inverse=false,
|
1026 |
36 |
dgisselq |
verbose_flag = false,
|
1027 |
37 |
dgisselq |
single_clock = true,
|
1028 |
36 |
dgisselq |
real_fft = false,
|
1029 |
|
|
async_reset = false;
|
1030 |
2 |
dgisselq |
FILE *vmain;
|
1031 |
28 |
dgisselq |
std::string coredir = DEF_COREDIR, cmdline = "", hdrname = "";
|
1032 |
23 |
dgisselq |
ROUND_T rounding = RND_CONVERGENT;
|
1033 |
|
|
// ROUND_T rounding = RND_HALFUP;
|
1034 |
2 |
dgisselq |
|
1035 |
26 |
dgisselq |
bool dbg = false;
|
1036 |
|
|
int dbgstage = 128;
|
1037 |
|
|
|
1038 |
2 |
dgisselq |
if (argc <= 1)
|
1039 |
|
|
usage();
|
1040 |
|
|
|
1041 |
36 |
dgisselq |
// Copy the original command line before we mess with it
|
1042 |
14 |
dgisselq |
cmdline = argv[0];
|
1043 |
2 |
dgisselq |
for(int argn=1; argn<argc; argn++) {
|
1044 |
14 |
dgisselq |
cmdline += " ";
|
1045 |
|
|
cmdline += argv[argn];
|
1046 |
|
|
}
|
1047 |
|
|
|
1048 |
36 |
dgisselq |
{ int c;
|
1049 |
|
|
while((c = getopt(argc, argv, "12Aa:c:d:D:f:hik:m:n:p:rsSx:v")) != -1) {
|
1050 |
|
|
switch(c) {
|
1051 |
|
|
case '1': single_clock = true; break;
|
1052 |
|
|
case '2': single_clock = false; break;
|
1053 |
|
|
case 'A': async_reset = true; break;
|
1054 |
|
|
case 'a': hdrname = strdup(optarg); break;
|
1055 |
|
|
case 'c': xtracbits = atoi(optarg); break;
|
1056 |
|
|
case 'd': coredir = std::string(optarg); break;
|
1057 |
|
|
case 'D': dbgstage = atoi(optarg); break;
|
1058 |
|
|
case 'f': fftsize = atoi(optarg);
|
1059 |
|
|
{ int sln = strlen(optarg);
|
1060 |
|
|
if (!isdigit(optarg[sln-1])){
|
1061 |
|
|
switch(optarg[sln-1]) {
|
1062 |
|
|
case 'k': case 'K':
|
1063 |
|
|
fftsize <<= 10;
|
1064 |
2 |
dgisselq |
break;
|
1065 |
36 |
dgisselq |
case 'm': case 'M':
|
1066 |
|
|
fftsize <<= 20;
|
1067 |
2 |
dgisselq |
break;
|
1068 |
36 |
dgisselq |
case 'g': case 'G':
|
1069 |
|
|
fftsize <<= 30;
|
1070 |
28 |
dgisselq |
break;
|
1071 |
33 |
dgisselq |
default:
|
1072 |
36 |
dgisselq |
printf("ERR: Unknown FFT size, %s!\n", optarg);
|
1073 |
|
|
exit(EXIT_FAILURE);
|
1074 |
|
|
}
|
1075 |
|
|
}} break;
|
1076 |
|
|
case 'h': usage(); exit(EXIT_SUCCESS); break;
|
1077 |
|
|
case 'i': inverse = true; break;
|
1078 |
|
|
case 'k': ckpce = atoi(optarg);
|
1079 |
|
|
single_clock = true;
|
1080 |
|
|
break;
|
1081 |
|
|
case 'm': maxbitsout = atoi(optarg); break;
|
1082 |
|
|
case 'n': nbitsin = atoi(optarg); break;
|
1083 |
|
|
case 'p': nummpy = atoi(optarg); break;
|
1084 |
|
|
case 'r': real_fft = true; break;
|
1085 |
|
|
case 'S': bitreverse = true; break;
|
1086 |
|
|
case 's': bitreverse = false; break;
|
1087 |
|
|
case 'x': xtrapbits = atoi(optarg); break;
|
1088 |
|
|
case 'v': verbose_flag = true; break;
|
1089 |
|
|
// case 'z': variable_size = true; break;
|
1090 |
|
|
default:
|
1091 |
|
|
printf("Unknown argument, -%c\n", c);
|
1092 |
2 |
dgisselq |
usage();
|
1093 |
36 |
dgisselq |
exit(EXIT_FAILURE);
|
1094 |
2 |
dgisselq |
}
|
1095 |
36 |
dgisselq |
}}
|
1096 |
|
|
|
1097 |
|
|
if (verbose_flag) {
|
1098 |
|
|
if (inverse)
|
1099 |
|
|
printf("Building a %d point inverse FFT module, with %s outputs\n",
|
1100 |
|
|
fftsize,
|
1101 |
|
|
(real_fft)?"real ":"complex");
|
1102 |
|
|
else
|
1103 |
|
|
printf("Building a %d point %sforward FFT module\n",
|
1104 |
|
|
fftsize,
|
1105 |
|
|
(real_fft)?"real ":"");
|
1106 |
|
|
if (!single_clock)
|
1107 |
|
|
printf(" that accepts two inputs per clock\n");
|
1108 |
|
|
if (async_reset)
|
1109 |
|
|
printf(" using a negative logic ASYNC reset\n");
|
1110 |
|
|
|
1111 |
|
|
printf("The core will be placed into the %s/ directory\n", coredir.c_str());
|
1112 |
|
|
|
1113 |
|
|
if (hdrname[0])
|
1114 |
|
|
printf("A C header file, %s, will be written capturing these\n"
|
1115 |
|
|
"options for a Verilator testbench\n",
|
1116 |
|
|
hdrname.c_str());
|
1117 |
|
|
// nummpy
|
1118 |
|
|
// xtrapbits
|
1119 |
2 |
dgisselq |
}
|
1120 |
|
|
|
1121 |
26 |
dgisselq |
if (real_fft) {
|
1122 |
|
|
printf("The real FFT option is not implemented yet, but still on\nmy to do list. Please try again later.\n");
|
1123 |
36 |
dgisselq |
exit(EXIT_FAILURE);
|
1124 |
|
|
}
|
1125 |
|
|
|
1126 |
|
|
if (ckpce < 1)
|
1127 |
|
|
ckpce = 1;
|
1128 |
|
|
if (!bitreverse) {
|
1129 |
26 |
dgisselq |
printf("WARNING: While I can skip the bit reverse stage, the code to do\n");
|
1130 |
|
|
printf("an inverse FFT on a bit--reversed input has not yet been\n");
|
1131 |
|
|
printf("built.\n");
|
1132 |
|
|
}
|
1133 |
|
|
|
1134 |
2 |
dgisselq |
if ((lgsize < 0)&&(fftsize > 1)) {
|
1135 |
|
|
for(lgsize=1; (1<<lgsize) < fftsize; lgsize++)
|
1136 |
|
|
;
|
1137 |
|
|
}
|
1138 |
|
|
|
1139 |
|
|
if ((fftsize <= 0)||(nbitsin < 1)||(nbitsin>48)) {
|
1140 |
|
|
printf("INVALID PARAMETERS!!!!\n");
|
1141 |
36 |
dgisselq |
exit(EXIT_FAILURE);
|
1142 |
2 |
dgisselq |
}
|
1143 |
|
|
|
1144 |
|
|
|
1145 |
|
|
if (nextlg(fftsize) != fftsize) {
|
1146 |
|
|
fprintf(stderr, "ERR: FFTSize (%d) *must* be a power of two\n",
|
1147 |
|
|
fftsize);
|
1148 |
36 |
dgisselq |
exit(EXIT_FAILURE);
|
1149 |
2 |
dgisselq |
} else if (fftsize < 2) {
|
1150 |
|
|
fprintf(stderr, "ERR: Minimum FFTSize is 2, not %d\n",
|
1151 |
|
|
fftsize);
|
1152 |
|
|
if (fftsize == 1) {
|
1153 |
|
|
fprintf(stderr, "You do realize that a 1 point FFT makes very little sense\n");
|
1154 |
|
|
fprintf(stderr, "in an FFT operation that handles two samples per clock?\n");
|
1155 |
|
|
fprintf(stderr, "If you really need to do an FFT of this size, the output\n");
|
1156 |
|
|
fprintf(stderr, "can be connected straight to the input.\n");
|
1157 |
|
|
} else {
|
1158 |
|
|
fprintf(stderr, "Indeed, a size of %d doesn\'t make much sense to me at all.\n", fftsize);
|
1159 |
|
|
fprintf(stderr, "Is such an operation even defined?\n");
|
1160 |
|
|
}
|
1161 |
36 |
dgisselq |
exit(EXIT_FAILURE);
|
1162 |
2 |
dgisselq |
}
|
1163 |
|
|
|
1164 |
|
|
// Calculate how many output bits we'll have, and what the log
|
1165 |
|
|
// based two size of our FFT is.
|
1166 |
|
|
{
|
1167 |
|
|
int tmp_size = fftsize;
|
1168 |
|
|
|
1169 |
|
|
// The first stage always accumulates one bit, regardless
|
1170 |
|
|
// of whether you need to or not.
|
1171 |
|
|
nbitsout = nbitsin + 1;
|
1172 |
|
|
tmp_size >>= 1;
|
1173 |
|
|
|
1174 |
|
|
while(tmp_size > 4) {
|
1175 |
|
|
nbitsout += 1;
|
1176 |
|
|
tmp_size >>= 2;
|
1177 |
|
|
}
|
1178 |
|
|
|
1179 |
|
|
if (tmp_size > 1)
|
1180 |
|
|
nbitsout ++;
|
1181 |
|
|
|
1182 |
|
|
if (fftsize <= 2)
|
1183 |
|
|
bitreverse = false;
|
1184 |
|
|
} if ((maxbitsout > 0)&&(nbitsout > maxbitsout))
|
1185 |
|
|
nbitsout = maxbitsout;
|
1186 |
|
|
|
1187 |
36 |
dgisselq |
if (verbose_flag) {
|
1188 |
|
|
printf("Output samples will be %d bits wide\n", nbitsout);
|
1189 |
|
|
printf("This %sFFT will take %d-bit samples in, and produce %d samples out\n", (inverse)?"i":"", nbitsin, nbitsout);
|
1190 |
|
|
if (maxbitsout > 0)
|
1191 |
|
|
printf(" Internally, it will allow items to accumulate to %d bits\n", maxbitsout);
|
1192 |
|
|
printf(" Twiddle-factors of %d bits will be used\n",
|
1193 |
|
|
nbitsin+xtracbits);
|
1194 |
|
|
if (!bitreverse)
|
1195 |
|
|
printf(" The output will be left in bit-reversed order\n");
|
1196 |
|
|
}
|
1197 |
|
|
|
1198 |
22 |
dgisselq |
// Figure out how many multiply stages to use, and how many to skip
|
1199 |
36 |
dgisselq |
if (!single_clock) {
|
1200 |
|
|
nmpypstage = 6;
|
1201 |
|
|
} else if (ckpce <= 1) {
|
1202 |
|
|
nmpypstage = 3;
|
1203 |
|
|
} else if (ckpce == 2) {
|
1204 |
|
|
nmpypstage = 2;
|
1205 |
|
|
} else
|
1206 |
|
|
nmpypstage = 1;
|
1207 |
2 |
dgisselq |
|
1208 |
36 |
dgisselq |
mpy_stages = nummpy / nmpypstage;
|
1209 |
|
|
if (mpy_stages > lgval(fftsize)-2)
|
1210 |
|
|
mpy_stages = lgval(fftsize)-2;
|
1211 |
22 |
dgisselq |
|
1212 |
2 |
dgisselq |
{
|
1213 |
|
|
struct stat sbuf;
|
1214 |
14 |
dgisselq |
if (lstat(coredir.c_str(), &sbuf)==0) {
|
1215 |
2 |
dgisselq |
if (!S_ISDIR(sbuf.st_mode)) {
|
1216 |
14 |
dgisselq |
fprintf(stderr, "\'%s\' already exists, and is not a directory!\n", coredir.c_str());
|
1217 |
2 |
dgisselq |
fprintf(stderr, "I will stop now, lest I overwrite something you care about.\n");
|
1218 |
|
|
fprintf(stderr, "To try again, please remove this file.\n");
|
1219 |
36 |
dgisselq |
exit(EXIT_FAILURE);
|
1220 |
2 |
dgisselq |
}
|
1221 |
33 |
dgisselq |
} else
|
1222 |
14 |
dgisselq |
mkdir(coredir.c_str(), 0755);
|
1223 |
|
|
if (access(coredir.c_str(), X_OK|W_OK) != 0) {
|
1224 |
|
|
fprintf(stderr, "I have no access to the directory \'%s\'.\n", coredir.c_str());
|
1225 |
36 |
dgisselq |
exit(EXIT_FAILURE);
|
1226 |
2 |
dgisselq |
}
|
1227 |
|
|
}
|
1228 |
|
|
|
1229 |
28 |
dgisselq |
if (hdrname.length() > 0) {
|
1230 |
|
|
FILE *hdr = fopen(hdrname.c_str(), "w");
|
1231 |
|
|
if (hdr == NULL) {
|
1232 |
|
|
fprintf(stderr, "ERROR: Cannot open %s to create header file\n", hdrname.c_str());
|
1233 |
|
|
perror("O/S Err:");
|
1234 |
36 |
dgisselq |
exit(EXIT_FAILURE);
|
1235 |
28 |
dgisselq |
}
|
1236 |
|
|
|
1237 |
36 |
dgisselq |
fprintf(hdr,
|
1238 |
|
|
SLASHLINE
|
1239 |
|
|
"//\n"
|
1240 |
|
|
"// Filename:\t%s\n"
|
1241 |
|
|
"//\n"
|
1242 |
|
|
"// Project:\t%s\n"
|
1243 |
|
|
"//\n"
|
1244 |
|
|
"// Purpose: This simple header file captures the internal constants\n"
|
1245 |
|
|
"// within the FFT that were used to build it, for the purpose\n"
|
1246 |
|
|
"// of making C++ integration (and test bench testing) simpler. That is,\n"
|
1247 |
|
|
"// should the FFT change size, this will note that size change and thus\n"
|
1248 |
|
|
"// any test bench or other C++ program dependent upon either the size of\n"
|
1249 |
|
|
"// the FFT, the number of bits in or out of it, etc., can pick up the\n"
|
1250 |
|
|
"// changes in the defines found within this file.\n"
|
1251 |
|
|
"//\n",
|
1252 |
|
|
hdrname.c_str(), prjname);
|
1253 |
28 |
dgisselq |
fprintf(hdr, "%s", creator);
|
1254 |
|
|
fprintf(hdr, "//\n");
|
1255 |
|
|
fprintf(hdr, "%s", cpyleft);
|
1256 |
|
|
fprintf(hdr, "//\n"
|
1257 |
|
|
"//\n"
|
1258 |
|
|
"#ifndef %sFFTHDR_H\n"
|
1259 |
|
|
"#define %sFFTHDR_H\n"
|
1260 |
|
|
"\n"
|
1261 |
|
|
"#define\t%sFFT_IWIDTH\t%d\n"
|
1262 |
|
|
"#define\t%sFFT_OWIDTH\t%d\n"
|
1263 |
|
|
"#define\t%sFFT_LGWIDTH\t%d\n"
|
1264 |
|
|
"#define\t%sFFT_SIZE\t(1<<%sFFT_LGWIDTH)\n\n",
|
1265 |
|
|
(inverse)?"I":"", (inverse)?"I":"",
|
1266 |
|
|
(inverse)?"I":"", nbitsin,
|
1267 |
|
|
(inverse)?"I":"", nbitsout,
|
1268 |
|
|
(inverse)?"I":"", lgsize,
|
1269 |
|
|
(inverse)?"I":"", (inverse)?"I":"");
|
1270 |
36 |
dgisselq |
if (ckpce > 0)
|
1271 |
|
|
fprintf(hdr, "#define\t%sFFT_CKPCE\t%d\t// Clocks per CE\n",
|
1272 |
|
|
(inverse)?"I":"", ckpce);
|
1273 |
|
|
else
|
1274 |
|
|
fprintf(hdr, "// Two samples per i_ce\n");
|
1275 |
28 |
dgisselq |
if (!bitreverse)
|
1276 |
|
|
fprintf(hdr, "#define\t%sFFT_SKIPS_BIT_REVERSE\n",
|
1277 |
|
|
(inverse)?"I":"");
|
1278 |
|
|
if (real_fft)
|
1279 |
|
|
fprintf(hdr, "#define\tRL%sFFT\n\n", (inverse)?"I":"");
|
1280 |
|
|
if (!single_clock)
|
1281 |
|
|
fprintf(hdr, "#define\tDBLCLK%sFFT\n\n", (inverse)?"I":"");
|
1282 |
36 |
dgisselq |
else
|
1283 |
|
|
fprintf(hdr, "// #define\tDBLCLK%sFFT // this FFT takes one input sample per clock\n\n", (inverse)?"I":"");
|
1284 |
29 |
dgisselq |
if (USE_OLD_MULTIPLY)
|
1285 |
|
|
fprintf(hdr, "#define\tUSE_OLD_MULTIPLY\n\n");
|
1286 |
33 |
dgisselq |
|
1287 |
29 |
dgisselq |
fprintf(hdr, "// Parameters for testing the longbimpy\n");
|
1288 |
|
|
fprintf(hdr, "#define\tTST_LONGBIMPY_AW\t%d\n", TST_LONGBIMPY_AW);
|
1289 |
|
|
#ifdef TST_LONGBIMPY_BW
|
1290 |
|
|
fprintf(hdr, "#define\tTST_LONGBIMPY_BW\t%d\n\n", TST_LONGBIMPY_BW);
|
1291 |
|
|
#else
|
1292 |
|
|
fprintf(hdr, "#define\tTST_LONGBIMPY_BW\tTST_LONGBIMPY_AW\n\n");
|
1293 |
|
|
#endif
|
1294 |
|
|
|
1295 |
|
|
fprintf(hdr, "// Parameters for testing the shift add multiply\n");
|
1296 |
|
|
fprintf(hdr, "#define\tTST_SHIFTADDMPY_AW\t%d\n", TST_SHIFTADDMPY_AW);
|
1297 |
|
|
#ifdef TST_SHIFTADDMPY_BW
|
1298 |
|
|
fprintf(hdr, "#define\tTST_SHIFTADDMPY_BW\t%d\n\n", TST_SHIFTADDMPY_BW);
|
1299 |
|
|
#else
|
1300 |
|
|
fprintf(hdr, "#define\tTST_SHIFTADDMPY_BW\tTST_SHIFTADDMPY_AW\n\n");
|
1301 |
|
|
#endif
|
1302 |
|
|
|
1303 |
|
|
#define TST_SHIFTADDMPY_AW 16
|
1304 |
|
|
#define TST_SHIFTADDMPY_BW 20 // Leave undefined to match AW
|
1305 |
|
|
fprintf(hdr, "// Parameters for testing the butterfly\n");
|
1306 |
|
|
fprintf(hdr, "#define\tTST_BUTTERFLY_IWIDTH\t%d\n", TST_BUTTERFLY_IWIDTH);
|
1307 |
|
|
fprintf(hdr, "#define\tTST_BUTTERFLY_CWIDTH\t%d\n", TST_BUTTERFLY_CWIDTH);
|
1308 |
|
|
fprintf(hdr, "#define\tTST_BUTTERFLY_OWIDTH\t%d\n", TST_BUTTERFLY_OWIDTH);
|
1309 |
|
|
fprintf(hdr, "#define\tTST_BUTTERFLY_MPYDELAY\t%d\n\n",
|
1310 |
|
|
bflydelay(TST_BUTTERFLY_IWIDTH,
|
1311 |
|
|
TST_BUTTERFLY_CWIDTH-TST_BUTTERFLY_IWIDTH));
|
1312 |
|
|
|
1313 |
|
|
fprintf(hdr, "// Parameters for testing the quarter stage\n");
|
1314 |
|
|
fprintf(hdr, "#define\tTST_QTRSTAGE_IWIDTH\t%d\n", TST_QTRSTAGE_IWIDTH);
|
1315 |
|
|
fprintf(hdr, "#define\tTST_QTRSTAGE_LGWIDTH\t%d\n\n", TST_QTRSTAGE_LGWIDTH);
|
1316 |
|
|
|
1317 |
|
|
fprintf(hdr, "// Parameters for testing the double stage\n");
|
1318 |
|
|
fprintf(hdr, "#define\tTST_DBLSTAGE_IWIDTH\t%d\n", TST_DBLSTAGE_IWIDTH);
|
1319 |
|
|
fprintf(hdr, "#define\tTST_DBLSTAGE_SHIFT\t%d\n\n", TST_DBLSTAGE_SHIFT);
|
1320 |
|
|
|
1321 |
|
|
fprintf(hdr, "// Parameters for testing the bit reversal stage\n");
|
1322 |
|
|
fprintf(hdr, "#define\tTST_DBLREVERSE_LGSIZE\t%d\n\n", TST_DBLREVERSE_LGSIZE);
|
1323 |
28 |
dgisselq |
fprintf(hdr, "\n" "#endif\n\n");
|
1324 |
|
|
fclose(hdr);
|
1325 |
|
|
}
|
1326 |
|
|
|
1327 |
14 |
dgisselq |
{
|
1328 |
|
|
std::string fname_string;
|
1329 |
|
|
|
1330 |
|
|
fname_string = coredir;
|
1331 |
|
|
fname_string += "/";
|
1332 |
|
|
if (inverse) fname_string += "i";
|
1333 |
|
|
fname_string += "fftmain.v";
|
1334 |
|
|
|
1335 |
|
|
vmain = fopen(fname_string.c_str(), "w");
|
1336 |
|
|
if (NULL == vmain) {
|
1337 |
|
|
fprintf(stderr, "Could not open \'%s\' for writing\n", fname_string.c_str());
|
1338 |
|
|
perror("Err from O/S:");
|
1339 |
36 |
dgisselq |
exit(EXIT_FAILURE);
|
1340 |
14 |
dgisselq |
}
|
1341 |
36 |
dgisselq |
|
1342 |
|
|
if (verbose_flag)
|
1343 |
|
|
printf("Opened %s\n", fname_string.c_str());
|
1344 |
2 |
dgisselq |
}
|
1345 |
|
|
|
1346 |
36 |
dgisselq |
fprintf(vmain,
|
1347 |
|
|
SLASHLINE
|
1348 |
|
|
"//\n"
|
1349 |
|
|
"// Filename:\t%sfftmain.v\n"
|
1350 |
|
|
"//\n"
|
1351 |
|
|
"// Project: %s\n"
|
1352 |
|
|
"//\n"
|
1353 |
|
|
"// Purpose: This is the main module in the General Purpose FPGA FFT\n"
|
1354 |
|
|
"// implementation. As such, all other modules are subordinate\n"
|
1355 |
|
|
"// to this one. This module accomplish a fixed size Complex FFT on\n"
|
1356 |
|
|
"// %d data points.\n",
|
1357 |
|
|
(inverse)?"i":"",prjname, fftsize);
|
1358 |
|
|
if (single_clock) {
|
1359 |
|
|
fprintf(vmain,
|
1360 |
|
|
"// The FFT is fully pipelined, and accepts as inputs one complex two\'s\n"
|
1361 |
|
|
"// complement sample per clock.\n");
|
1362 |
|
|
} else {
|
1363 |
|
|
fprintf(vmain,
|
1364 |
|
|
"// The FFT is fully pipelined, and accepts as inputs two complex two\'s\n"
|
1365 |
|
|
"// complement samples per clock.\n");
|
1366 |
|
|
}
|
1367 |
|
|
|
1368 |
|
|
fprintf(vmain,
|
1369 |
|
|
"//\n"
|
1370 |
|
|
"// Parameters:\n"
|
1371 |
|
|
"// i_clk\tThe clock. All operations are synchronous with this clock.\n"
|
1372 |
|
|
"// i_%sreset%s\tSynchronous reset, active high. Setting this line will\n"
|
1373 |
|
|
"// \t\tforce the reset of all of the internals to this routine.\n"
|
1374 |
|
|
"// \t\tFurther, following a reset, the o_sync line will go\n"
|
1375 |
|
|
"// \t\thigh the same time the first output sample is valid.\n",
|
1376 |
|
|
(async_reset)?"a":"", (async_reset)?"_n":"");
|
1377 |
|
|
if (single_clock) {
|
1378 |
|
|
fprintf(vmain,
|
1379 |
|
|
"// i_ce\tA clock enable line. If this line is set, this module\n"
|
1380 |
|
|
"// \t\twill accept one complex input value, and produce\n"
|
1381 |
|
|
"// \t\tone (possibly empty) complex output value.\n"
|
1382 |
|
|
"// i_sample\tThe complex input sample. This value is split\n"
|
1383 |
|
|
"// \t\tinto two two\'s complement numbers, %d bits each, with\n"
|
1384 |
|
|
"// \t\tthe real portion in the high order bits, and the\n"
|
1385 |
|
|
"// \t\timaginary portion taking the bottom %d bits.\n"
|
1386 |
|
|
"// o_result\tThe output result, of the same format as i_sample,\n"
|
1387 |
|
|
"// \t\tonly having %d bits for each of the real and imaginary\n"
|
1388 |
|
|
"// \t\tcomponents, leading to %d bits total.\n"
|
1389 |
|
|
"// o_sync\tA one bit output indicating the first sample of the FFT frame.\n"
|
1390 |
|
|
"// \t\tIt also indicates the first valid sample out of the FFT\n"
|
1391 |
|
|
"// \t\ton the first frame.\n", nbitsin, nbitsin, nbitsout, nbitsout*2);
|
1392 |
|
|
} else {
|
1393 |
|
|
fprintf(vmain,
|
1394 |
|
|
"// i_ce\tA clock enable line. If this line is set, this module\n"
|
1395 |
|
|
"// \t\twill accept two complex values as inputs, and produce\n"
|
1396 |
|
|
"// \t\ttwo (possibly empty) complex values as outputs.\n"
|
1397 |
|
|
"// i_left\tThe first of two complex input samples. This value is split\n"
|
1398 |
|
|
"// \t\tinto two two\'s complement numbers, %d bits each, with\n"
|
1399 |
|
|
"// \t\tthe real portion in the high order bits, and the\n"
|
1400 |
|
|
"// \t\timaginary portion taking the bottom %d bits.\n"
|
1401 |
|
|
"// i_right\tThis is the same thing as i_left, only this is the second of\n"
|
1402 |
|
|
"// \t\ttwo such samples. Hence, i_left would contain input\n"
|
1403 |
|
|
"// \t\tsample zero, i_right would contain sample one. On the\n"
|
1404 |
|
|
"// \t\tnext clock i_left would contain input sample two,\n"
|
1405 |
|
|
"// \t\ti_right number three and so forth.\n"
|
1406 |
|
|
"// o_left\tThe first of two output samples, of the same format as i_left,\n"
|
1407 |
|
|
"// \t\tonly having %d bits for each of the real and imaginary\n"
|
1408 |
|
|
"// \t\tcomponents, leading to %d bits total.\n"
|
1409 |
|
|
"// o_right\tThe second of two output samples produced each clock. This has\n"
|
1410 |
|
|
"// \t\tthe same format as o_left.\n"
|
1411 |
|
|
"// o_sync\tA one bit output indicating the first valid sample produced by\n"
|
1412 |
|
|
"// \t\tthis FFT following a reset. Ever after, this will\n"
|
1413 |
|
|
"// \t\tindicate the first sample of an FFT frame.\n",
|
1414 |
|
|
nbitsin, nbitsin, nbitsout, nbitsout*2);
|
1415 |
|
|
}
|
1416 |
|
|
|
1417 |
|
|
fprintf(vmain,
|
1418 |
|
|
"//\n"
|
1419 |
|
|
"// Arguments:\tThis file was computer generated using the following command\n"
|
1420 |
|
|
"//\t\tline:\n"
|
1421 |
|
|
"//\n");
|
1422 |
14 |
dgisselq |
fprintf(vmain, "//\t\t%% %s\n", cmdline.c_str());
|
1423 |
|
|
fprintf(vmain, "//\n");
|
1424 |
37 |
dgisselq |
fprintf(vmain, "//\tThis core will use hardware accelerated multiplies (DSPs)\n"
|
1425 |
|
|
"//\tfor %d of the %d stages\n", mpy_stages, lgval(fftsize));
|
1426 |
|
|
fprintf(vmain, "//\n");
|
1427 |
2 |
dgisselq |
fprintf(vmain, "%s", creator);
|
1428 |
|
|
fprintf(vmain, "//\n");
|
1429 |
|
|
fprintf(vmain, "%s", cpyleft);
|
1430 |
35 |
dgisselq |
fprintf(vmain, "//\n//\n`default_nettype\tnone\n//\n");
|
1431 |
2 |
dgisselq |
|
1432 |
|
|
|
1433 |
36 |
dgisselq |
std::string resetw("i_reset");
|
1434 |
|
|
if (async_reset)
|
1435 |
|
|
resetw = "i_areset_n";
|
1436 |
|
|
|
1437 |
2 |
dgisselq |
fprintf(vmain, "//\n");
|
1438 |
|
|
fprintf(vmain, "//\n");
|
1439 |
36 |
dgisselq |
fprintf(vmain, "module %sfftmain(i_clk, %s, i_ce,\n",
|
1440 |
|
|
(inverse)?"i":"", resetw.c_str());
|
1441 |
|
|
if (single_clock) {
|
1442 |
|
|
fprintf(vmain, "\t\ti_sample, o_result, o_sync%s);\n",
|
1443 |
26 |
dgisselq |
(dbg)?", o_dbg":"");
|
1444 |
36 |
dgisselq |
} else {
|
1445 |
|
|
fprintf(vmain, "\t\ti_left, i_right,\n");
|
1446 |
|
|
fprintf(vmain, "\t\to_left, o_right, o_sync%s);\n",
|
1447 |
|
|
(dbg)?", o_dbg":"");
|
1448 |
|
|
}
|
1449 |
37 |
dgisselq |
fprintf(vmain,
|
1450 |
|
|
"\t// The bit-width of the input, IWIDTH, output, OWIDTH, and the log\n"
|
1451 |
|
|
"\t// of the FFT size. These are localparams, rather than parameters,\n"
|
1452 |
|
|
"\t// because once the core has been generated, they can no longer be\n"
|
1453 |
|
|
"\t// changed. (These values can be adjusted by running the core\n"
|
1454 |
|
|
"\t// generator again.) The reason is simply that these values have\n"
|
1455 |
|
|
"\t// been hardwired into the core at several places.\n");
|
1456 |
|
|
fprintf(vmain, "\tlocalparam\tIWIDTH=%d, OWIDTH=%d, LGWIDTH=%d;\n\t//\n", nbitsin, nbitsout, lgsize);
|
1457 |
2 |
dgisselq |
assert(lgsize > 0);
|
1458 |
37 |
dgisselq |
fprintf(vmain, "\tinput\twire\t\t\t\ti_clk, %s, i_ce;\n\t//\n",
|
1459 |
36 |
dgisselq |
resetw.c_str());
|
1460 |
|
|
if (single_clock) {
|
1461 |
37 |
dgisselq |
fprintf(vmain, "\tinput\twire\t[(2*IWIDTH-1):0]\ti_sample;\n");
|
1462 |
36 |
dgisselq |
fprintf(vmain, "\toutput\treg\t[(2*OWIDTH-1):0]\to_result;\n");
|
1463 |
|
|
} else {
|
1464 |
37 |
dgisselq |
fprintf(vmain, "\tinput\twire\t[(2*IWIDTH-1):0]\ti_left, i_right;\n");
|
1465 |
2 |
dgisselq |
fprintf(vmain, "\toutput\treg\t[(2*OWIDTH-1):0]\to_left, o_right;\n");
|
1466 |
36 |
dgisselq |
}
|
1467 |
|
|
fprintf(vmain, "\toutput\treg\t\t\t\to_sync;\n");
|
1468 |
26 |
dgisselq |
if (dbg)
|
1469 |
|
|
fprintf(vmain, "\toutput\twire\t[33:0]\t\to_dbg;\n");
|
1470 |
2 |
dgisselq |
fprintf(vmain, "\n\n");
|
1471 |
|
|
|
1472 |
|
|
fprintf(vmain, "\t// Outputs of the FFT, ready for bit reversal.\n");
|
1473 |
36 |
dgisselq |
if (single_clock)
|
1474 |
|
|
fprintf(vmain, "\twire\t[(2*OWIDTH-1):0]\tbr_sample;\n");
|
1475 |
|
|
else
|
1476 |
|
|
fprintf(vmain, "\twire\t[(2*OWIDTH-1):0]\tbr_left, br_right;\n");
|
1477 |
2 |
dgisselq |
int tmp_size = fftsize, lgtmp = lgsize;
|
1478 |
|
|
if (fftsize == 2) {
|
1479 |
|
|
if (bitreverse) {
|
1480 |
|
|
fprintf(vmain, "\treg\tbr_start;\n");
|
1481 |
25 |
dgisselq |
fprintf(vmain, "\tinitial br_start = 1\'b0;\n");
|
1482 |
36 |
dgisselq |
if (async_reset) {
|
1483 |
|
|
fprintf(vmain, "\talways @(posedge i_clk, negedge i_arese_n)\n");
|
1484 |
|
|
fprintf(vmain, "\t\tif (!i_areset_n)\n");
|
1485 |
|
|
} else {
|
1486 |
|
|
fprintf(vmain, "\talways @(posedge i_clk)\n");
|
1487 |
|
|
fprintf(vmain, "\t\tif (i_reset)\n");
|
1488 |
|
|
}
|
1489 |
26 |
dgisselq |
fprintf(vmain, "\t\t\tbr_start <= 1\'b0;\n");
|
1490 |
2 |
dgisselq |
fprintf(vmain, "\t\telse if (i_ce)\n");
|
1491 |
26 |
dgisselq |
fprintf(vmain, "\t\t\tbr_start <= 1\'b1;\n");
|
1492 |
2 |
dgisselq |
}
|
1493 |
|
|
fprintf(vmain, "\n\n");
|
1494 |
36 |
dgisselq |
fprintf(vmain, "\tlaststage\t#(IWIDTH)\tstage_2(i_clk, %s, i_ce,\n", resetw.c_str());
|
1495 |
|
|
fprintf(vmain, "\t\t\t(%s%s), i_left, i_right, br_left, br_right);\n",
|
1496 |
|
|
(async_reset)?"":"!", resetw.c_str());
|
1497 |
2 |
dgisselq |
fprintf(vmain, "\n\n");
|
1498 |
|
|
} else {
|
1499 |
|
|
int nbits = nbitsin, dropbit=0;
|
1500 |
26 |
dgisselq |
int obits = nbits+1+xtrapbits;
|
1501 |
36 |
dgisselq |
std::string cmem;
|
1502 |
|
|
FILE *cmemfp;
|
1503 |
26 |
dgisselq |
|
1504 |
|
|
if ((maxbitsout > 0)&&(obits > maxbitsout))
|
1505 |
|
|
obits = maxbitsout;
|
1506 |
|
|
|
1507 |
2 |
dgisselq |
// Always do a first stage
|
1508 |
14 |
dgisselq |
{
|
1509 |
22 |
dgisselq |
bool mpystage;
|
1510 |
2 |
dgisselq |
|
1511 |
22 |
dgisselq |
// Last two stages are always non-multiply stages
|
1512 |
|
|
// since the multiplies can be done by adds
|
1513 |
36 |
dgisselq |
mpystage = ((lgtmp-2) <= mpy_stages);
|
1514 |
22 |
dgisselq |
|
1515 |
37 |
dgisselq |
fprintf(vmain, "\n\n");
|
1516 |
28 |
dgisselq |
if (mpystage)
|
1517 |
|
|
fprintf(vmain, "\t// A hardware optimized FFT stage\n");
|
1518 |
35 |
dgisselq |
fprintf(vmain, "\twire\t\tw_s%d;\n", fftsize);
|
1519 |
36 |
dgisselq |
if (single_clock) {
|
1520 |
|
|
fprintf(vmain, "\twire\t[%d:0]\tw_d%d;\n", 2*(obits+xtrapbits)-1, fftsize);
|
1521 |
37 |
dgisselq |
cmem = gen_coeff_fname(coredir.c_str(), fftsize, 1, 0, inverse);
|
1522 |
36 |
dgisselq |
cmemfp = gen_coeff_open(cmem.c_str());
|
1523 |
|
|
gen_coeffs(cmemfp, fftsize, nbitsin+xtracbits, 1, 0, inverse);
|
1524 |
37 |
dgisselq |
cmem = gen_coeff_fname(EMPTYSTR, fftsize, 1, 0, inverse);
|
1525 |
|
|
fprintf(vmain, "\tfftstage%s\t#(IWIDTH,IWIDTH+%d,%d,%d,0,\n\t\t\t%d, %d, \"%s\")\n\t\tstage_%d(i_clk, %s, i_ce,\n",
|
1526 |
28 |
dgisselq |
((dbg)&&(dbgstage == fftsize))?"_dbg":"",
|
1527 |
36 |
dgisselq |
xtracbits, obits+xtrapbits,
|
1528 |
37 |
dgisselq |
lgtmp-1, (mpystage)?1:0,
|
1529 |
36 |
dgisselq |
ckpce, cmem.c_str(),
|
1530 |
|
|
fftsize, resetw.c_str());
|
1531 |
|
|
fprintf(vmain, "\t\t\t(%s%s), i_sample, w_d%d, w_s%d%s);\n",
|
1532 |
|
|
(async_reset)?"":"!", resetw.c_str(),
|
1533 |
|
|
fftsize, fftsize,
|
1534 |
|
|
((dbg)&&(dbgstage == fftsize))
|
1535 |
|
|
? ", o_dbg":"");
|
1536 |
|
|
} else {
|
1537 |
|
|
fprintf(vmain, "\t// verilator lint_off UNUSED\n\twire\t\tw_os%d;\n\t// verilator lint_on UNUSED\n", fftsize);
|
1538 |
|
|
fprintf(vmain, "\twire\t[%d:0]\tw_e%d, w_o%d;\n", 2*(obits+xtrapbits)-1, fftsize, fftsize);
|
1539 |
37 |
dgisselq |
cmem = gen_coeff_fname(coredir.c_str(), fftsize, 2, 0, inverse);
|
1540 |
36 |
dgisselq |
cmemfp = gen_coeff_open(cmem.c_str());
|
1541 |
|
|
gen_coeffs(cmemfp, fftsize, nbitsin+xtracbits, 2, 0, inverse);
|
1542 |
37 |
dgisselq |
cmem = gen_coeff_fname(EMPTYSTR, fftsize, 2, 0, inverse);
|
1543 |
|
|
fprintf(vmain, "\tfftstage%s\t#(IWIDTH,IWIDTH+%d,%d,%d,0,\n\t\t\t%d, %d, \"%s\")\n\t\tstage_e%d(i_clk, %s, i_ce,\n",
|
1544 |
36 |
dgisselq |
((dbg)&&(dbgstage == fftsize))?"_dbg":"",
|
1545 |
|
|
xtracbits, obits+xtrapbits,
|
1546 |
37 |
dgisselq |
lgtmp-2, (mpystage)?1:0,
|
1547 |
36 |
dgisselq |
ckpce, cmem.c_str(),
|
1548 |
|
|
fftsize, resetw.c_str());
|
1549 |
|
|
fprintf(vmain, "\t\t\t(%s%s), i_left, w_e%d, w_s%d%s);\n",
|
1550 |
|
|
(async_reset)?"":"!", resetw.c_str(),
|
1551 |
|
|
fftsize, fftsize,
|
1552 |
|
|
((dbg)&&(dbgstage == fftsize))?", o_dbg":"");
|
1553 |
37 |
dgisselq |
cmem = gen_coeff_fname(coredir.c_str(), fftsize, 2, 1, inverse);
|
1554 |
36 |
dgisselq |
cmemfp = gen_coeff_open(cmem.c_str());
|
1555 |
|
|
gen_coeffs(cmemfp, fftsize, nbitsin+xtracbits, 2, 1, inverse);
|
1556 |
37 |
dgisselq |
cmem = gen_coeff_fname(EMPTYSTR, fftsize, 2, 1, inverse);
|
1557 |
|
|
fprintf(vmain, "\tfftstage\t#(IWIDTH,IWIDTH+%d,%d,%d,0,\n\t\t\t%d, %d, \"%s\")\n\t\tstage_o%d(i_clk, %s, i_ce,\n",
|
1558 |
36 |
dgisselq |
xtracbits, obits+xtrapbits,
|
1559 |
37 |
dgisselq |
lgtmp-2, (mpystage)?1:0,
|
1560 |
36 |
dgisselq |
ckpce, cmem.c_str(),
|
1561 |
|
|
fftsize, resetw.c_str());
|
1562 |
|
|
fprintf(vmain, "\t\t\t(%s%s), i_right, w_o%d, w_os%d);\n",
|
1563 |
|
|
(async_reset)?"":"!",resetw.c_str(),
|
1564 |
|
|
fftsize, fftsize);
|
1565 |
|
|
}
|
1566 |
28 |
dgisselq |
|
1567 |
|
|
std::string fname;
|
1568 |
|
|
|
1569 |
14 |
dgisselq |
fname = coredir + "/";
|
1570 |
36 |
dgisselq |
if (inverse)
|
1571 |
|
|
fname += "i";
|
1572 |
|
|
fname += "fftstage";
|
1573 |
|
|
if (dbg) {
|
1574 |
|
|
std::string dbgname(fname);
|
1575 |
|
|
dbgname += "_dbg";
|
1576 |
|
|
dbgname += ".v";
|
1577 |
|
|
if (single_clock)
|
1578 |
|
|
build_stage(fname.c_str(), fftsize, 1, 0, nbits, xtracbits, ckpce, async_reset, true);
|
1579 |
|
|
else
|
1580 |
37 |
dgisselq |
build_stage(fname.c_str(), fftsize, 2, 1, nbits, xtracbits, ckpce, async_reset, true);
|
1581 |
36 |
dgisselq |
}
|
1582 |
14 |
dgisselq |
|
1583 |
|
|
fname += ".v";
|
1584 |
36 |
dgisselq |
if (single_clock) {
|
1585 |
|
|
build_stage(fname.c_str(), fftsize, 1, 0,
|
1586 |
|
|
nbits, xtracbits, ckpce, async_reset,
|
1587 |
|
|
false);
|
1588 |
|
|
} else {
|
1589 |
|
|
// All stages use the same Verilog, so we only
|
1590 |
|
|
// need to build one
|
1591 |
37 |
dgisselq |
build_stage(fname.c_str(), fftsize, 2, 1,
|
1592 |
36 |
dgisselq |
nbits, xtracbits, ckpce, async_reset, false);
|
1593 |
|
|
}
|
1594 |
14 |
dgisselq |
}
|
1595 |
|
|
|
1596 |
26 |
dgisselq |
nbits = obits; // New number of input bits
|
1597 |
2 |
dgisselq |
tmp_size >>= 1; lgtmp--;
|
1598 |
|
|
dropbit = 0;
|
1599 |
|
|
fprintf(vmain, "\n\n");
|
1600 |
|
|
while(tmp_size >= 8) {
|
1601 |
26 |
dgisselq |
obits = nbits+((dropbit)?0:1);
|
1602 |
2 |
dgisselq |
|
1603 |
|
|
if ((maxbitsout > 0)&&(obits > maxbitsout))
|
1604 |
|
|
obits = maxbitsout;
|
1605 |
|
|
|
1606 |
14 |
dgisselq |
{
|
1607 |
22 |
dgisselq |
bool mpystage;
|
1608 |
2 |
dgisselq |
|
1609 |
36 |
dgisselq |
mpystage = ((lgtmp-2) <= mpy_stages);
|
1610 |
22 |
dgisselq |
|
1611 |
28 |
dgisselq |
if (mpystage)
|
1612 |
|
|
fprintf(vmain, "\t// A hardware optimized FFT stage\n");
|
1613 |
35 |
dgisselq |
fprintf(vmain, "\twire\t\tw_s%d;\n",
|
1614 |
|
|
tmp_size);
|
1615 |
36 |
dgisselq |
if (single_clock) {
|
1616 |
|
|
fprintf(vmain,"\twire\t[%d:0]\tw_d%d;\n",
|
1617 |
|
|
2*(obits+xtrapbits)-1,
|
1618 |
|
|
tmp_size);
|
1619 |
37 |
dgisselq |
cmem = gen_coeff_fname(coredir.c_str(), tmp_size, 1, 0, inverse);
|
1620 |
36 |
dgisselq |
cmemfp = gen_coeff_open(cmem.c_str());
|
1621 |
|
|
gen_coeffs(cmemfp, tmp_size,
|
1622 |
|
|
nbits+xtracbits+xtrapbits, 1, 0, inverse);
|
1623 |
37 |
dgisselq |
cmem = gen_coeff_fname(EMPTYSTR, tmp_size, 1, 0, inverse);
|
1624 |
|
|
fprintf(vmain, "\tfftstage%s\t#(%d,%d,%d,%d,%d,\n\t\t\t%d, %d, \"%s\")\n\t\tstage_%d(i_clk, %s, i_ce,\n",
|
1625 |
36 |
dgisselq |
((dbg)&&(dbgstage==tmp_size))?"_dbg":"",
|
1626 |
|
|
nbits+xtrapbits,
|
1627 |
|
|
nbits+xtracbits+xtrapbits,
|
1628 |
|
|
obits+xtrapbits,
|
1629 |
37 |
dgisselq |
lgtmp-1, (dropbit)?0:0, (mpystage)?1:0,
|
1630 |
36 |
dgisselq |
ckpce,
|
1631 |
|
|
cmem.c_str(), tmp_size,
|
1632 |
|
|
resetw.c_str());
|
1633 |
|
|
fprintf(vmain, "\t\t\tw_s%d, w_d%d, w_d%d, w_s%d%s);\n",
|
1634 |
|
|
tmp_size<<1, tmp_size<<1,
|
1635 |
|
|
tmp_size, tmp_size,
|
1636 |
|
|
((dbg)&&(dbgstage == tmp_size))
|
1637 |
|
|
?", o_dbg":"");
|
1638 |
|
|
} else {
|
1639 |
|
|
fprintf(vmain, "\t// verilator lint_off UNUSED\n\twire\t\tw_os%d;\n\t// verilator lint_on UNUSED\n",
|
1640 |
|
|
tmp_size);
|
1641 |
|
|
fprintf(vmain,"\twire\t[%d:0]\tw_e%d, w_o%d;\n",
|
1642 |
|
|
2*(obits+xtrapbits)-1,
|
1643 |
|
|
tmp_size, tmp_size);
|
1644 |
37 |
dgisselq |
cmem = gen_coeff_fname(coredir.c_str(), tmp_size, 2, 0, inverse);
|
1645 |
36 |
dgisselq |
cmemfp = gen_coeff_open(cmem.c_str());
|
1646 |
|
|
gen_coeffs(cmemfp, tmp_size,
|
1647 |
|
|
nbits+xtracbits+xtrapbits, 2, 0, inverse);
|
1648 |
37 |
dgisselq |
cmem = gen_coeff_fname(EMPTYSTR, tmp_size, 2, 0, inverse);
|
1649 |
|
|
fprintf(vmain, "\tfftstage%s\t#(%d,%d,%d,%d,%d,\n\t\t\t%d, %d, \"%s\")\n\t\tstage_e%d(i_clk, %s, i_ce,\n",
|
1650 |
36 |
dgisselq |
((dbg)&&(dbgstage==tmp_size))?"_dbg":"",
|
1651 |
|
|
nbits+xtrapbits,
|
1652 |
|
|
nbits+xtracbits+xtrapbits,
|
1653 |
|
|
obits+xtrapbits,
|
1654 |
37 |
dgisselq |
lgtmp-2, (dropbit)?0:0, (mpystage)?1:0,
|
1655 |
36 |
dgisselq |
ckpce,
|
1656 |
|
|
cmem.c_str(), tmp_size,
|
1657 |
|
|
resetw.c_str());
|
1658 |
|
|
fprintf(vmain, "\t\t\tw_s%d, w_e%d, w_e%d, w_s%d%s);\n",
|
1659 |
|
|
tmp_size<<1, tmp_size<<1,
|
1660 |
|
|
tmp_size, tmp_size,
|
1661 |
|
|
((dbg)&&(dbgstage == tmp_size))
|
1662 |
|
|
?", o_dbg":"");
|
1663 |
37 |
dgisselq |
cmem = gen_coeff_fname(coredir.c_str(),
|
1664 |
36 |
dgisselq |
tmp_size, 2, 1, inverse);
|
1665 |
|
|
cmemfp = gen_coeff_open(cmem.c_str());
|
1666 |
|
|
gen_coeffs(cmemfp, tmp_size,
|
1667 |
|
|
nbits+xtracbits+xtrapbits,
|
1668 |
|
|
2, 1, inverse);
|
1669 |
37 |
dgisselq |
cmem = gen_coeff_fname(EMPTYSTR,
|
1670 |
|
|
tmp_size, 2, 1, inverse);
|
1671 |
|
|
fprintf(vmain, "\tfftstage\t#(%d,%d,%d,%d,%d,\n\t\t\t%d, %d, \"%s\")\n\t\tstage_o%d(i_clk, %s, i_ce,\n",
|
1672 |
36 |
dgisselq |
nbits+xtrapbits,
|
1673 |
|
|
nbits+xtracbits+xtrapbits,
|
1674 |
|
|
obits+xtrapbits,
|
1675 |
37 |
dgisselq |
lgtmp-2, (dropbit)?0:0, (mpystage)?1:0,
|
1676 |
36 |
dgisselq |
ckpce, cmem.c_str(), tmp_size,
|
1677 |
|
|
resetw.c_str());
|
1678 |
|
|
fprintf(vmain, "\t\t\tw_s%d, w_o%d, w_o%d, w_os%d);\n",
|
1679 |
|
|
tmp_size<<1, tmp_size<<1,
|
1680 |
|
|
tmp_size, tmp_size);
|
1681 |
|
|
}
|
1682 |
|
|
fprintf(vmain, "\n");
|
1683 |
14 |
dgisselq |
}
|
1684 |
|
|
|
1685 |
|
|
|
1686 |
2 |
dgisselq |
dropbit ^= 1;
|
1687 |
|
|
nbits = obits;
|
1688 |
|
|
tmp_size >>= 1; lgtmp--;
|
1689 |
|
|
}
|
1690 |
|
|
|
1691 |
|
|
if (tmp_size == 4) {
|
1692 |
26 |
dgisselq |
obits = nbits+((dropbit)?0:1);
|
1693 |
2 |
dgisselq |
|
1694 |
|
|
if ((maxbitsout > 0)&&(obits > maxbitsout))
|
1695 |
|
|
obits = maxbitsout;
|
1696 |
|
|
|
1697 |
35 |
dgisselq |
fprintf(vmain, "\twire\t\tw_s4;\n");
|
1698 |
36 |
dgisselq |
if (single_clock) {
|
1699 |
|
|
fprintf(vmain, "\twire\t[%d:0]\tw_d4;\n",
|
1700 |
|
|
2*(obits+xtrapbits)-1);
|
1701 |
|
|
fprintf(vmain, "\tqtrstage%s\t#(%d,%d,%d,%d,%d)\tstage_4(i_clk, %s, i_ce,\n",
|
1702 |
|
|
((dbg)&&(dbgstage==4))?"_dbg":"",
|
1703 |
|
|
nbits+xtrapbits, obits+xtrapbits, lgsize,
|
1704 |
|
|
(inverse)?1:0, (dropbit)?0:0,
|
1705 |
|
|
resetw.c_str());
|
1706 |
|
|
fprintf(vmain, "\t\t\t\t\t\tw_s8, w_d8, w_d4, w_s4%s);\n",
|
1707 |
|
|
((dbg)&&(dbgstage==4))?", o_dbg":"");
|
1708 |
|
|
} else {
|
1709 |
|
|
fprintf(vmain, "\t// verilator lint_off UNUSED\n\twire\t\tw_os4;\n\t// verilator lint_on UNUSED\n");
|
1710 |
|
|
fprintf(vmain, "\twire\t[%d:0]\tw_e4, w_o4;\n", 2*(obits+xtrapbits)-1);
|
1711 |
|
|
fprintf(vmain, "\tqtrstage%s\t#(%d,%d,%d,0,%d,%d)\tstage_e4(i_clk, %s, i_ce,\n",
|
1712 |
|
|
((dbg)&&(dbgstage==4))?"_dbg":"",
|
1713 |
|
|
nbits+xtrapbits, obits+xtrapbits, lgsize,
|
1714 |
|
|
(inverse)?1:0, (dropbit)?0:0,
|
1715 |
|
|
resetw.c_str());
|
1716 |
|
|
fprintf(vmain, "\t\t\t\t\t\tw_s8, w_e8, w_e4, w_s4%s);\n",
|
1717 |
|
|
((dbg)&&(dbgstage==4))?", o_dbg":"");
|
1718 |
|
|
fprintf(vmain, "\tqtrstage\t#(%d,%d,%d,1,%d,%d)\tstage_o4(i_clk, %s, i_ce,\n",
|
1719 |
|
|
nbits+xtrapbits, obits+xtrapbits, lgsize, (inverse)?1:0, (dropbit)?0:0,
|
1720 |
|
|
resetw.c_str());
|
1721 |
|
|
fprintf(vmain, "\t\t\t\t\t\tw_s8, w_o8, w_o4, w_os4);\n");
|
1722 |
|
|
}
|
1723 |
2 |
dgisselq |
dropbit ^= 1;
|
1724 |
|
|
nbits = obits;
|
1725 |
|
|
tmp_size >>= 1; lgtmp--;
|
1726 |
|
|
}
|
1727 |
|
|
|
1728 |
|
|
{
|
1729 |
26 |
dgisselq |
obits = nbits+((dropbit)?0:1);
|
1730 |
2 |
dgisselq |
if (obits > nbitsout)
|
1731 |
|
|
obits = nbitsout;
|
1732 |
|
|
if ((maxbitsout>0)&&(obits > maxbitsout))
|
1733 |
|
|
obits = maxbitsout;
|
1734 |
|
|
fprintf(vmain, "\twire\t\tw_s2;\n");
|
1735 |
36 |
dgisselq |
if (single_clock) {
|
1736 |
|
|
fprintf(vmain, "\twire\t[%d:0]\tw_d2;\n",
|
1737 |
|
|
2*obits-1);
|
1738 |
|
|
} else {
|
1739 |
|
|
fprintf(vmain, "\twire\t[%d:0]\tw_e2, w_o2;\n",
|
1740 |
|
|
2*obits-1);
|
1741 |
|
|
}
|
1742 |
37 |
dgisselq |
/*
|
1743 |
28 |
dgisselq |
if ((nbits+xtrapbits+1 == obits)&&(!dropbit))
|
1744 |
37 |
dgisselq |
printf("Warning: Less than optimal scaling\n");
|
1745 |
|
|
*/
|
1746 |
2 |
dgisselq |
|
1747 |
36 |
dgisselq |
if (single_clock) {
|
1748 |
|
|
fprintf(vmain, "\tlaststage\t#(%d,%d,%d)\tstage_2(i_clk, %s, i_ce,\n",
|
1749 |
|
|
nbits+xtrapbits, obits,(dropbit)?0:1,
|
1750 |
|
|
resetw.c_str());
|
1751 |
|
|
fprintf(vmain, "\t\t\t\t\tw_s4, w_d4, w_d2, w_s2);\n");
|
1752 |
|
|
} else {
|
1753 |
|
|
fprintf(vmain, "\tlaststage\t#(%d,%d,%d)\tstage_2(i_clk, %s, i_ce,\n",
|
1754 |
|
|
nbits+xtrapbits, obits,(dropbit)?0:1,
|
1755 |
|
|
resetw.c_str());
|
1756 |
|
|
fprintf(vmain, "\t\t\t\t\tw_s4, w_e4, w_o4, w_e2, w_o2, w_s2);\n");
|
1757 |
|
|
}
|
1758 |
|
|
|
1759 |
2 |
dgisselq |
fprintf(vmain, "\n\n");
|
1760 |
|
|
nbits = obits;
|
1761 |
|
|
}
|
1762 |
|
|
|
1763 |
|
|
fprintf(vmain, "\t// Prepare for a (potential) bit-reverse stage.\n");
|
1764 |
36 |
dgisselq |
if (single_clock)
|
1765 |
|
|
fprintf(vmain, "\tassign\tbr_sample= w_d2;\n");
|
1766 |
|
|
else {
|
1767 |
|
|
fprintf(vmain, "\tassign\tbr_left = w_e2;\n");
|
1768 |
|
|
fprintf(vmain, "\tassign\tbr_right = w_o2;\n");
|
1769 |
|
|
}
|
1770 |
2 |
dgisselq |
fprintf(vmain, "\n");
|
1771 |
|
|
if (bitreverse) {
|
1772 |
|
|
fprintf(vmain, "\twire\tbr_start;\n");
|
1773 |
|
|
fprintf(vmain, "\treg\tr_br_started;\n");
|
1774 |
25 |
dgisselq |
fprintf(vmain, "\tinitial\tr_br_started = 1\'b0;\n");
|
1775 |
36 |
dgisselq |
if (async_reset) {
|
1776 |
|
|
fprintf(vmain, "\talways @(posedge i_clk, negedge i_areset_n)\n");
|
1777 |
|
|
fprintf(vmain, "\t\tif (!i_areset_n)\n");
|
1778 |
|
|
} else {
|
1779 |
|
|
fprintf(vmain, "\talways @(posedge i_clk)\n");
|
1780 |
|
|
fprintf(vmain, "\t\tif (i_reset)\n");
|
1781 |
|
|
}
|
1782 |
26 |
dgisselq |
fprintf(vmain, "\t\t\tr_br_started <= 1\'b0;\n");
|
1783 |
|
|
fprintf(vmain, "\t\telse if (i_ce)\n");
|
1784 |
23 |
dgisselq |
fprintf(vmain, "\t\t\tr_br_started <= r_br_started || w_s2;\n");
|
1785 |
|
|
fprintf(vmain, "\tassign\tbr_start = r_br_started || w_s2;\n");
|
1786 |
2 |
dgisselq |
}
|
1787 |
|
|
}
|
1788 |
|
|
|
1789 |
36 |
dgisselq |
|
1790 |
2 |
dgisselq |
fprintf(vmain, "\n");
|
1791 |
|
|
fprintf(vmain, "\t// Now for the bit-reversal stage.\n");
|
1792 |
|
|
fprintf(vmain, "\twire\tbr_sync;\n");
|
1793 |
|
|
if (bitreverse) {
|
1794 |
36 |
dgisselq |
if (single_clock) {
|
1795 |
|
|
fprintf(vmain, "\twire\t[(2*OWIDTH-1):0]\tbr_o_result;\n");
|
1796 |
|
|
fprintf(vmain, "\tbitreverse\t#(%d,%d)\n\t\trevstage(i_clk, %s,\n", lgsize, nbitsout, resetw.c_str());
|
1797 |
|
|
fprintf(vmain, "\t\t\t(i_ce & br_start), br_sample,\n");
|
1798 |
|
|
fprintf(vmain, "\t\t\tbr_o_result, br_sync);\n");
|
1799 |
|
|
} else {
|
1800 |
|
|
fprintf(vmain, "\twire\t[(2*OWIDTH-1):0]\tbr_o_left, br_o_right;\n");
|
1801 |
|
|
fprintf(vmain, "\tbitreverse\t#(%d,%d)\n\t\trevstage(i_clk, %s,\n", lgsize, nbitsout, resetw.c_str());
|
1802 |
|
|
fprintf(vmain, "\t\t\t(i_ce & br_start), br_left, br_right,\n");
|
1803 |
|
|
fprintf(vmain, "\t\t\tbr_o_left, br_o_right, br_sync);\n");
|
1804 |
|
|
}
|
1805 |
|
|
} else if (single_clock) {
|
1806 |
|
|
fprintf(vmain, "\tassign\tbr_o_result = br_result;\n");
|
1807 |
|
|
fprintf(vmain, "\tassign\tbr_sync = w_s2;\n");
|
1808 |
2 |
dgisselq |
} else {
|
1809 |
|
|
fprintf(vmain, "\tassign\tbr_o_left = br_left;\n");
|
1810 |
|
|
fprintf(vmain, "\tassign\tbr_o_right = br_right;\n");
|
1811 |
|
|
fprintf(vmain, "\tassign\tbr_sync = w_s2;\n");
|
1812 |
|
|
}
|
1813 |
|
|
|
1814 |
36 |
dgisselq |
fprintf(vmain,
|
1815 |
|
|
"\n\n"
|
1816 |
|
|
"\t// Last clock: Register our outputs, we\'re done.\n"
|
1817 |
|
|
"\tinitial\to_sync = 1\'b0;\n");
|
1818 |
|
|
if (async_reset)
|
1819 |
|
|
fprintf(vmain,
|
1820 |
|
|
"\talways @(posedge i_clk, negedge i_areset_n)\n\t\tif (!i_areset_n)\n");
|
1821 |
|
|
else {
|
1822 |
|
|
fprintf(vmain,
|
1823 |
|
|
"\talways @(posedge i_clk)\n\t\tif (i_reset)\n");
|
1824 |
|
|
}
|
1825 |
|
|
|
1826 |
|
|
fprintf(vmain,
|
1827 |
|
|
"\t\t\to_sync <= 1\'b0;\n"
|
1828 |
|
|
"\t\telse if (i_ce)\n"
|
1829 |
|
|
"\t\t\to_sync <= br_sync;\n"
|
1830 |
|
|
"\n"
|
1831 |
|
|
"\talways @(posedge i_clk)\n"
|
1832 |
|
|
"\t\tif (i_ce)\n");
|
1833 |
|
|
if (single_clock) {
|
1834 |
|
|
fprintf(vmain, "\t\t\to_result <= br_o_result;\n");
|
1835 |
|
|
} else {
|
1836 |
|
|
fprintf(vmain,
|
1837 |
|
|
"\t\tbegin\n"
|
1838 |
|
|
"\t\t\to_left <= br_o_left;\n"
|
1839 |
|
|
"\t\t\to_right <= br_o_right;\n"
|
1840 |
|
|
"\t\tend\n");
|
1841 |
|
|
}
|
1842 |
|
|
|
1843 |
|
|
fprintf(vmain,
|
1844 |
|
|
"\n\n"
|
1845 |
|
|
"endmodule\n");
|
1846 |
2 |
dgisselq |
fclose(vmain);
|
1847 |
|
|
|
1848 |
36 |
dgisselq |
|
1849 |
14 |
dgisselq |
{
|
1850 |
|
|
std::string fname;
|
1851 |
2 |
dgisselq |
|
1852 |
14 |
dgisselq |
fname = coredir + "/butterfly.v";
|
1853 |
36 |
dgisselq |
build_butterfly(fname.c_str(), xtracbits, rounding,
|
1854 |
|
|
ckpce, async_reset);
|
1855 |
2 |
dgisselq |
|
1856 |
36 |
dgisselq |
fname = coredir + "/hwbfly.v";
|
1857 |
|
|
build_hwbfly(fname.c_str(), xtracbits, rounding,
|
1858 |
|
|
ckpce, async_reset);
|
1859 |
22 |
dgisselq |
|
1860 |
29 |
dgisselq |
{
|
1861 |
|
|
// To make debugging easier, we build both of these
|
1862 |
|
|
fname = coredir + "/shiftaddmpy.v";
|
1863 |
|
|
build_multiply(fname.c_str());
|
1864 |
2 |
dgisselq |
|
1865 |
29 |
dgisselq |
fname = coredir + "/longbimpy.v";
|
1866 |
|
|
build_longbimpy(fname.c_str());
|
1867 |
|
|
fname = coredir + "/bimpy.v";
|
1868 |
|
|
build_bimpy(fname.c_str());
|
1869 |
|
|
}
|
1870 |
|
|
|
1871 |
26 |
dgisselq |
if ((dbg)&&(dbgstage == 4)) {
|
1872 |
|
|
fname = coredir + "/qtrstage_dbg.v";
|
1873 |
36 |
dgisselq |
if (single_clock)
|
1874 |
|
|
build_snglquarters(fname.c_str(), rounding,
|
1875 |
|
|
async_reset, true);
|
1876 |
|
|
else
|
1877 |
|
|
build_dblquarters(fname.c_str(), rounding,
|
1878 |
|
|
async_reset, true);
|
1879 |
26 |
dgisselq |
}
|
1880 |
14 |
dgisselq |
fname = coredir + "/qtrstage.v";
|
1881 |
36 |
dgisselq |
if (single_clock)
|
1882 |
|
|
build_snglquarters(fname.c_str(), rounding,
|
1883 |
|
|
async_reset, false);
|
1884 |
26 |
dgisselq |
else
|
1885 |
36 |
dgisselq |
build_dblquarters(fname.c_str(), rounding,
|
1886 |
|
|
async_reset, false);
|
1887 |
14 |
dgisselq |
|
1888 |
36 |
dgisselq |
|
1889 |
|
|
if (single_clock) {
|
1890 |
|
|
fname = coredir + "/laststage.v";
|
1891 |
|
|
build_sngllast(fname.c_str(), async_reset);
|
1892 |
|
|
} else {
|
1893 |
|
|
if ((dbg)&&(dbgstage == 2))
|
1894 |
|
|
fname = coredir + "/laststage_dbg.v";
|
1895 |
|
|
else
|
1896 |
|
|
fname = coredir + "/laststage.v";
|
1897 |
|
|
build_dblstage(fname.c_str(), rounding,
|
1898 |
|
|
async_reset, (dbg)&&(dbgstage==2));
|
1899 |
|
|
}
|
1900 |
|
|
|
1901 |
14 |
dgisselq |
if (bitreverse) {
|
1902 |
36 |
dgisselq |
fname = coredir + "/bitreverse.v";
|
1903 |
|
|
if (single_clock)
|
1904 |
|
|
build_snglbrev(fname.c_str(), async_reset);
|
1905 |
|
|
else
|
1906 |
|
|
build_dblreverse(fname.c_str(), async_reset);
|
1907 |
14 |
dgisselq |
}
|
1908 |
23 |
dgisselq |
|
1909 |
|
|
const char *rnd_string = "";
|
1910 |
|
|
switch(rounding) {
|
1911 |
|
|
case RND_TRUNCATE: rnd_string = "/truncate.v"; break;
|
1912 |
|
|
case RND_FROMZERO: rnd_string = "/roundfromzero.v"; break;
|
1913 |
|
|
case RND_HALFUP: rnd_string = "/roundhalfup.v"; break;
|
1914 |
|
|
default:
|
1915 |
|
|
rnd_string = "/convround.v"; break;
|
1916 |
|
|
} fname = coredir + rnd_string;
|
1917 |
|
|
switch(rounding) {
|
1918 |
|
|
case RND_TRUNCATE: build_truncator(fname.c_str()); break;
|
1919 |
|
|
case RND_FROMZERO: build_roundfromzero(fname.c_str()); break;
|
1920 |
|
|
case RND_HALFUP: build_roundhalfup(fname.c_str()); break;
|
1921 |
|
|
default:
|
1922 |
|
|
build_convround(fname.c_str()); break;
|
1923 |
|
|
}
|
1924 |
|
|
|
1925 |
2 |
dgisselq |
}
|
1926 |
36 |
dgisselq |
|
1927 |
|
|
if (verbose_flag)
|
1928 |
|
|
printf("All done -- success\n");
|
1929 |
2 |
dgisselq |
}
|