OpenCores
URL https://opencores.org/ocsvn/de1_olpcl2294_system/de1_olpcl2294_system/trunk

Subversion Repositories de1_olpcl2294_system

[/] [de1_olpcl2294_system/] [trunk/] [sw/] [ecos/] [ecos-3.0_diff.txt] - Blame information for rev 10

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/cdl/de1_olpcl2294_eth_drivers.cdl ../ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/cdl/de1_olpcl2294_eth_drivers.cdl
2 
--- /opt/ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/cdl/de1_olpcl2294_eth_drivers.cdl    1969-12-31 16:00:00.000000000 -0800
3 
+++ ../ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/cdl/de1_olpcl2294_eth_drivers.cdl      2010-10-07 16:54:30.023380600 -0700
4 
@@ -0,0 +1,112 @@
5 
+# ====================================================================
6 
+#
7 
+#      de1_olpcl2294_eth_drivers.cdl
8 
+#
9 
+#      Ethernet drivers - platform dependent support for DE1_OLPCL2294
10 
+#
11 
+# ====================================================================
12 
+## ####ECOSGPLCOPYRIGHTBEGIN####
13 
+## -------------------------------------------
14 
+## This file is part of eCos, the Embedded Configurable Operating System.
15 
+## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
16 
+##
17 
+## eCos is free software; you can redistribute it and/or modify it under
18 
+## the terms of the GNU General Public License as published by the Free
19 
+## Software Foundation; either version 2 or (at your option) any later
20 
+## version.
21 
+##
22 
+## eCos is distributed in the hope that it will be useful, but WITHOUT
23 
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
24 
+## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
25 
+## for more details.
26 
+##
27 
+## You should have received a copy of the GNU General Public License
28 
+## along with eCos; if not, write to the Free Software Foundation, Inc.,
29 
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
30 
+##
31 
+## As a special exception, if other files instantiate templates or use
32 
+## macros or inline functions from this file, or you compile this file
33 
+## and link it with other works to produce a work based on this file,
34 
+## this file does not by itself cause the resulting work to be covered by
35 
+## the GNU General Public License. However the source code for this file
36 
+## must still be made available in accordance with section (3) of the GNU
37 
+## General Public License v2.
38 
+##
39 
+## This exception does not invalidate any other reasons why a work based
40 
+## on this file might be covered by the GNU General Public License.
41 
+## -------------------------------------------
42 
+## ####ECOSGPLCOPYRIGHTEND####
43 
+# ====================================================================
44 
+######DESCRIPTIONBEGIN####
45 
+#
46 
+# Author(s):      Sergei Gavrikov
47 
+# Contributors:   Sergei Gavrikov
48 
+# Date:           2008-08-31
49 
+#
50 
+#####DESCRIPTIONEND####
51 
+#
52 
+# ====================================================================
53 
+
54 
+cdl_package CYGPKG_DEVS_ETH_ARM_DE1_OLPCL2294 {
55 
+    display       "LAN ethernet driver for Olimex LPC-L2294-1MB"
56 
+
57 
+    parent        CYGPKG_IO_ETH_DRIVERS
58 
+    active_if     CYGPKG_IO_ETH_DRIVERS
59 
+    active_if     CYGPKG_HAL_ARM_LPC2XXX_DE1_OLPCL2294
60 
+
61 
+   include_dir   cyg/io
62 
+
63 
+    description   "
64 
+        Ethernet driver for Olimex LPC-L2294-1MB board."
65 
+
66 
+    # FIXME: This really belongs in the CL CS8900A package
67 
+    cdl_interface CYGINT_DEVS_ETH_CL_CS8900A_REQUIRED {
68 
+        display   "Cirrus Logic CS8900A ethernet driver required"
69 
+    }
70 
+
71 
+    define_proc {
72 
+        puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
73 
+        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_CL_CS8900A_INL "
74 
+        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_CL_CS8900A_CFG "
75 
+        puts $::cdl_system_header "/*****  ethernet driver proc output end  *****/"
76 
+    }
77 
+
78 
+   cdl_component CYGPKG_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0 {
79 
+        display       "DE1_OLPCL2294 ethernet port driver"
80 
+        flavor        bool
81 
+        default_value 1
82 
+        description   "
83 
+            This option includes the ethernet device driver for the
84 
+            DE1_OLPCL2294 port."
85 
+
86 
+        implements CYGHWR_NET_DRIVER_ETH0
87 
+        implements CYGINT_DEVS_ETH_CL_CS8900A_REQUIRED
88 
+
89 
+        cdl_option CYGDAT_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_NAME {
90 
+            display       "Device name for the ETH0 ethernet driver"
91 
+            flavor        data
92 
+            default_value {"\"eth0\""}
93 
+            description   "
94 
+                This option sets the name of the ethernet device."
95 
+        }
96 
+
97 
+        cdl_component CYGSEM_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_SET_ESA {
98 
+            display       "Set the ethernet station address"
99 
+            flavor        bool
100 
+            calculated    1
101 
+            description   "
102 
+                Enabling this option will allow the ethernet
103 
+                station address to be forced to the value set by the
104 
+                configuration.  This may be required if the hardware
105 
+                does not include a serial EEPROM for the ESA."
106 
+
107 
+            cdl_option CYGDAT_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_ESA {
108 
+                display       "The ethernet station address"
109 
+                flavor        data
110 
+                default_value {"{0x08, 0x88, 0x12, 0x34, 0x56, 0x78}"}
111 
+                description   "The ethernet station address"
112 
+            }
113 
+        }
114 
+    }
115 
+}
116 
+
117 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/include/devs_eth_arm_de1_olpcl2294.h ../ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/include/devs_eth_arm_de1_olpcl2294.h
118 
--- /opt/ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/include/devs_eth_arm_de1_olpcl2294.h 1969-12-31 16:00:00.000000000 -0800
119 
+++ ../ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/include/devs_eth_arm_de1_olpcl2294.h   2010-10-07 16:53:16.900252600 -0700
120 
@@ -0,0 +1,57 @@
121 
+#ifndef _CYGONCE_DEVS_ETH_ARM_DE1_OLPCL2294_H
122 
+#define _CYGONCE_DEVS_ETH_ARM_DE1_OLPCL2294_H
123 
+//==========================================================================
124 
+//
125 
+//      devs_eth_arm_de1_olpcl2294.h
126 
+//
127 
+//      DE1_OLPCL2294 ethernet configuration
128 
+//
129 
+//==========================================================================
130 
+// ####ECOSGPLCOPYRIGHTBEGIN####
131 
+// -------------------------------------------
132 
+// This file is part of eCos, the Embedded Configurable Operating System.
133 
+// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
134 
+//
135 
+// eCos is free software; you can redistribute it and/or modify it under
136 
+// the terms of the GNU General Public License as published by the Free
137 
+// Software Foundation; either version 2 or (at your option) any later
138 
+// version.
139 
+//
140 
+// eCos is distributed in the hope that it will be useful, but WITHOUT
141 
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
142 
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
143 
+// for more details.
144 
+//
145 
+// You should have received a copy of the GNU General Public License
146 
+// along with eCos; if not, write to the Free Software Foundation, Inc.,
147 
+// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
148 
+//
149 
+// As a special exception, if other files instantiate templates or use
150 
+// macros or inline functions from this file, or you compile this file
151 
+// and link it with other works to produce a work based on this file,
152 
+// this file does not by itself cause the resulting work to be covered by
153 
+// the GNU General Public License. However the source code for this file
154 
+// must still be made available in accordance with section (3) of the GNU
155 
+// General Public License v2.
156 
+//
157 
+// This exception does not invalidate any other reasons why a work based
158 
+// on this file might be covered by the GNU General Public License.
159 
+// -------------------------------------------
160 
+// ####ECOSGPLCOPYRIGHTEND####
161 
+//==========================================================================
162 
+//#####DESCRIPTIONBEGIN####
163 
+//
164 
+// Author(s):     Sergei Gavrikov
165 
+// Contributors:  Sergei Gavrikov
166 
+// Date:          2008-08-31
167 
+// Purpose:       DE1_OLPCL2294 ethernet configuration
168 
+// Description:
169 
+//
170 
+//####DESCRIPTIONEND####
171 
+//
172 
+//========================================================================*/
173 
+
174 
+
175 
+#endif // _CYGONCE_DEVS_ETH_ARM_DE1_OLPCL2294_H
176 
+//--------------------------------------------------------------------------
177 
+// EOF devs_eth_arm_de1_olpcl2294.h
178 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/include/devs_eth_arm_de1_olpcl2294.inl ../ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/include/devs_eth_arm_de1_olpcl2294.inl
179 
--- /opt/ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/include/devs_eth_arm_de1_olpcl2294.inl       1969-12-31 16:00:00.000000000 -0800
180 
+++ ../ecos-3.0/packages/devs/eth/arm/de1_olpcl2294/v3_0/include/devs_eth_arm_de1_olpcl2294.inl 2010-10-07 16:52:25.979681200 -0700
181 
@@ -0,0 +1,169 @@
182 
+//==========================================================================
183 
+//
184 
+//      devs_eth_arm_olpcl2294.inl
185 
+//
186 
+//      DE1_OLPCL2294 ethernet I/O definitions
187 
+//
188 
+//==========================================================================
189 
+// ####ECOSGPLCOPYRIGHTBEGIN####
190 
+// -------------------------------------------
191 
+// This file is part of eCos, the Embedded Configurable Operating System.
192 
+// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
193 
+//
194 
+// eCos is free software; you can redistribute it and/or modify it under
195 
+// the terms of the GNU General Public License as published by the Free
196 
+// Software Foundation; either version 2 or (at your option) any later
197 
+// version.
198 
+//
199 
+// eCos is distributed in the hope that it will be useful, but WITHOUT
200 
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
201 
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
202 
+// for more details.
203 
+//
204 
+// You should have received a copy of the GNU General Public License
205 
+// along with eCos; if not, write to the Free Software Foundation, Inc.,
206 
+// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
207 
+//
208 
+// As a special exception, if other files instantiate templates or use
209 
+// macros or inline functions from this file, or you compile this file
210 
+// and link it with other works to produce a work based on this file,
211 
+// this file does not by itself cause the resulting work to be covered by
212 
+// the GNU General Public License. However the source code for this file
213 
+// must still be made available in accordance with section (3) of the GNU
214 
+// General Public License v2.
215 
+//
216 
+// This exception does not invalidate any other reasons why a work based
217 
+// on this file might be covered by the GNU General Public License.
218 
+// -------------------------------------------
219 
+// ####ECOSGPLCOPYRIGHTEND####
220 
+//==========================================================================
221 
+//#####DESCRIPTIONBEGIN####
222 
+//
223 
+// Author(s):     Sergei Gavrikov
224 
+// Contributors:  Sergei Gavrikov
225 
+// Date:
226 
+// Purpose:       DE1_OLPCL2294 ethernet definitions
227 
+// Description:
228 
+//
229 
+//####DESCRIPTIONEND####
230 
+//
231 
+//========================================================================*/
232 
+
233 
+#include
234 
+#include
235 
+
236 
+#ifdef CYGPKG_REDBOOT
237 
+# include
238 
+# ifdef CYGSEM_REDBOOT_FLASH_CONFIG
239 
+#  include
240 
+#  include
241 
+# endif
242 
+#endif
243 
+
244 
+#ifdef __WANT_CONFIG
245 
+//#define DEBUG 0x0f
246 
+#endif // __WANT_CONFIG
247 
+
248 
+#ifdef __WANT_DEVS
249 
+
250 
+#ifdef CYGPKG_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0
251 
+
252 
+#ifndef CYGSEM_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_SET_ESA
253 
+# if defined(CYGPKG_REDBOOT) && defined(CYGSEM_REDBOOT_FLASH_CONFIG)
254 
+RedBoot_config_option("Set " CYGDAT_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_NAME " network hardware address [MAC]",
255 
+                      eth0_esa,
256 
+                      ALWAYS_ENABLED, true,
257 
+                      CONFIG_BOOL, false
258 
+    );
259 
+RedBoot_config_option(CYGDAT_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_NAME " network hardware address [MAC]",
260 
+                      eth0_esa_data,
261 
+                      "eth0_esa", true,
262 
+                      CONFIG_ESA, 0
263 
+    );
264 
+# endif // CYGPKG_REDBOOT && CYGSEM_REDBOOT_FLASH_CONFIG
265 
+
266 
+# ifdef CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
267 
+// Note that this section *is* active in an application, outside RedBoot,
268 
+// where the above section is not included.
269 
+
270 
+#  include
271 
+
272 
+#  ifndef CONFIG_ESA
273 
+#   define CONFIG_ESA (6)
274 
+#  endif
275 
+#  ifndef CONFIG_BOOL
276 
+#   define CONFIG_BOOL (1)
277 
+#  endif
278 
+
279 
+cyg_bool
280 
+_de1_olpcl2294_provide_eth0_esa(struct cs8900a_priv_data* cpd)
281 
+{
282 
+    cyg_bool set_esa;
283 
+    int ok;
284 
+    ok = CYGACC_CALL_IF_FLASH_CFG_OP( CYGNUM_CALL_IF_FLASH_CFG_GET,
285 
+                                      "eth0_esa", &set_esa, CONFIG_BOOL);
286 
+    if (ok && set_esa) {
287 
+        ok = CYGACC_CALL_IF_FLASH_CFG_OP( CYGNUM_CALL_IF_FLASH_CFG_GET,
288 
+                                          "eth0_esa_data", cpd->esa, CONFIG_ESA);
289 
+    }
290 
+    return ok && set_esa;
291 
+}
292 
+
293 
+# endif // CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
294 
+#endif // ! CYGSEM_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_SET_ESA
295 
+
296 
+static __inline__ void
297 
+post_reset(cyg_addrword_t base)
298 
+{
299 
+    // Toggle A0 connected to the SBHE# line
300 
+    HAL_WRITE_UINT8( 0x82000000, 1 );
301 
+    HAL_WRITE_UINT8( 0x82000001, 2 );
302 
+    HAL_WRITE_UINT8( 0x82000000, 3 );
303 
+    HAL_WRITE_UINT8( 0x82000001, 0 );
304 
+}
305 
+
306 
+#undef CYGHWR_CL_CS8900A_PLF_POST_RESET
307 
+#define CYGHWR_CL_CS8900A_PLF_POST_RESET(base) post_reset(base)
308 
+
309 
+static cs8900a_priv_data_t cs8900a_eth0_priv_data = {
310 
+    base : (cyg_addrword_t) 0x82000000,
311 
+    interrupt : CYGNUM_HAL_INTERRUPT_EINT2,
312 
+#ifdef CYGSEM_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_SET_ESA
313 
+    esa : CYGDAT_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_ESA,
314 
+    hardwired_esa : true,
315 
+#else
316 
+    hardwired_esa : false,
317 
+# ifdef CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
318 
+    provide_esa : &_de1_olpcl2294_provide_eth0_esa,
319 
+# else
320 
+    provide_esa : NULL,
321 
+# endif
322 
+#endif
323 
+};
324 
+
325 
+ETH_DRV_SC(cs8900a_sc,
326 
+           &cs8900a_eth0_priv_data, // Driver specific data
327 
+           CYGDAT_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_NAME,
328 
+           cs8900a_start,
329 
+           cs8900a_stop,
330 
+           cs8900a_control,
331 
+           cs8900a_can_send,
332 
+           cs8900a_send,
333 
+           cs8900a_recv,
334 
+           cs8900a_deliver,     // "pseudoDSR" called from fast net thread
335 
+           cs8900a_poll,        // poll function, encapsulates ISR and DSR
336 
+           cs8900a_int_vector);
337 
+
338 
+NETDEVTAB_ENTRY(cs8900a_netdev,
339 
+                "cs8900a_" CYGDAT_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0_NAME,
340 
+                cs8900a_init,
341 
+                &cs8900a_sc);
342 
+
343 
+#endif // CYGPKG_DEVS_ETH_ARM_DE1_OLPCL2294_ETH0
344 
+
345 
+#endif // __WANT_DEVS
346 
+
347 
+// indent: --indent-level4 -br -nut; vim: expandtab tabstop=4 shiftwidth=4
348 
+//--------------------------------------------------------------------------
349 
+// EOF devs_eth_arm_de1_olpcl2294.inl
350 
+
351 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/devs/flash/arm/de1_olpcx2294/v3_0/cdl/flash_de1_olpcx2294.cdl ../ecos-3.0/packages/devs/flash/arm/de1_olpcx2294/v3_0/cdl/flash_de1_olpcx2294.cdl
352 8 qaztronic 
--- /opt/ecos-3.0/packages/devs/flash/arm/de1_olpcx2294/v3_0/cdl/flash_de1_olpcx2294.cdl        1969-12-31 16:00:00.000000000 -0800
353 10 qaztronic 
+++ ../ecos-3.0/packages/devs/flash/arm/de1_olpcx2294/v3_0/cdl/flash_de1_olpcx2294.cdl  2010-10-07 17:36:06.896959000 -0700
354 
@@ -0,0 +1,71 @@
355 8 qaztronic 
+# ====================================================================
356 
+#
357 
+#      flash_olpcx2294.cdl
358 
+#
359 
+#      FLASH memory - Hardware support on Olimex LPC-X2294 boards
360 
+#
361 
+# ====================================================================
362 
+## ####ECOSGPLCOPYRIGHTBEGIN####
363 
+## -------------------------------------------
364 
+## This file is part of eCos, the Embedded Configurable Operating System.
365 
+## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
366 
+##
367 
+## eCos is free software; you can redistribute it and/or modify it under
368 
+## the terms of the GNU General Public License as published by the Free
369 
+## Software Foundation; either version 2 or (at your option) any later
370 
+## version.
371 
+##
372 
+## eCos is distributed in the hope that it will be useful, but WITHOUT
373 
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
374 
+## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
375 
+## for more details.
376 
+##
377 
+## You should have received a copy of the GNU General Public License
378 
+## along with eCos; if not, write to the Free Software Foundation, Inc.,
379 
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
380 
+##
381 
+## As a special exception, if other files instantiate templates or use
382 
+## macros or inline functions from this file, or you compile this file
383 
+## and link it with other works to produce a work based on this file,
384 
+## this file does not by itself cause the resulting work to be covered by
385 
+## the GNU General Public License. However the source code for this file
386 
+## must still be made available in accordance with section (3) of the GNU
387 
+## General Public License v2.
388 
+##
389 
+## This exception does not invalidate any other reasons why a work based
390 
+## on this file might be covered by the GNU General Public License.
391 
+## -------------------------------------------
392 
+## ####ECOSGPLCOPYRIGHTEND####
393 
+# ====================================================================
394 
+######DESCRIPTIONBEGIN####
395 
+#
396 
+# Author(s):      Sergei Gavrikov
397 
+# Contributors:   Sergei Gavrikov
398 
+# Date:           2008-11-28
399 
+#
400 
+#####DESCRIPTIONEND####
401 
+#
402 
+# ====================================================================
403 
+
404 
+cdl_package CYGPKG_DEVS_FLASH_ARM_DE1_OLPCX2294_V2 {
405 10 qaztronic 
+    display       "Support for FLASH memory parts on Terasic DE1 & OLPC-X2294 boards."
406 8 qaztronic 
+
407 
+    compile       -library=libextras.a arm_olpcx2294_flash.c
408 
+
409 
+    parent        CYGPKG_IO_FLASH
410 
+    active_if     CYGPKG_IO_FLASH
411 
+
412 10 qaztronic 
+    requires      CYGPKG_HAL_ARM_LPC2XXX_DE1_OLPCL2294
413 8 qaztronic 
+
414 
+    requires      CYGPKG_DEVS_FLASH_STRATA_V2
415 
+
416 
+    implements    CYGHWR_IO_FLASH_BLOCK_LOCKING
417 
+
418 
+    description "
419 
+        Olimex LPC-X2294 boards all have strata family 28FxxxC3 flash
420 
+        memory parts. These parts have boot blocks. There is no buffered
421 
+        write capability. Individual blocks can be locked and unlocked
422 
+        in software"
423 
+
424 
+}
425 
+
426 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/devs/flash/arm/de1_olpcx2294/v3_0/src/arm_olpcx2294_flash.c ../ecos-3.0/packages/devs/flash/arm/de1_olpcx2294/v3_0/src/arm_olpcx2294_flash.c
427 8 qaztronic 
--- /opt/ecos-3.0/packages/devs/flash/arm/de1_olpcx2294/v3_0/src/arm_olpcx2294_flash.c  1969-12-31 16:00:00.000000000 -0800
428 10 qaztronic 
+++ ../ecos-3.0/packages/devs/flash/arm/de1_olpcx2294/v3_0/src/arm_olpcx2294_flash.c    2009-12-04 17:20:22.000000000 -0800
429 8 qaztronic 
@@ -0,0 +1,114 @@
430 
+//==========================================================================
431 
+//
432 
+//      arm_olpcx2294_flash.c
433 
+//
434 
+//      Flash programming for Intel FlashFile devices on Olimex LPC-X2294
435 
+//
436 
+//==========================================================================
437 
+// ####ECOSGPLCOPYRIGHTBEGIN####
438 
+// -------------------------------------------
439 
+// This file is part of eCos, the Embedded Configurable Operating System.
440 
+// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
441 
+//
442 
+// eCos is free software; you can redistribute it and/or modify it under
443 
+// the terms of the GNU General Public License as published by the Free
444 
+// Software Foundation; either version 2 or (at your option) any later
445 
+// version.
446 
+//
447 
+// eCos is distributed in the hope that it will be useful, but WITHOUT
448 
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
449 
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
450 
+// for more details.
451 
+//
452 
+// You should have received a copy of the GNU General Public License
453 
+// along with eCos; if not, write to the Free Software Foundation, Inc.,
454 
+// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
455 
+//
456 
+// As a special exception, if other files instantiate templates or use
457 
+// macros or inline functions from this file, or you compile this file
458 
+// and link it with other works to produce a work based on this file,
459 
+// this file does not by itself cause the resulting work to be covered by
460 
+// the GNU General Public License. However the source code for this file
461 
+// must still be made available in accordance with section (3) of the GNU
462 
+// General Public License v2.
463 
+//
464 
+// This exception does not invalidate any other reasons why a work based
465 
+// on this file might be covered by the GNU General Public License.
466 
+// -------------------------------------------
467 
+// ####ECOSGPLCOPYRIGHTEND####
468 
+//==========================================================================
469 
+//#####DESCRIPTIONBEGIN####
470 
+//
471 
+// Author(s):     Sergei Gavrikov
472 
+// Contributors:  Sergei Gavrikov
473 
+// Date:          2008-11-28
474 
+// Purpose:
475 
+// Description:
476 
+//
477 
+//####DESCRIPTIONEND####
478 
+//
479 
+//========================================================================*/
480 
+
481 
+#include
482 
+
483 
+#if !defined(CYGPKG_HAL_ARM_LPC2XXX_OLPCE2294) && \
484 
+    !defined(CYGPKG_HAL_ARM_LPC2XXX_OLPCH2294) && \
485 
+    !defined(CYGPKG_HAL_ARM_LPC2XXX_OLPCL2294) && \
486 
+    !defined(CYGPKG_HAL_ARM_LPC2XXX_DE1_OLPCL2294)
487 
+# error Unsupported target
488 
+#endif
489 
+
490 
+#ifdef CYGPKG_DEVS_FLASH_STRATA_V2
491 
+
492 
+#include
493 
+#include
494 
+
495 
+// Olimex LPC-E2294 development board and Olimex LPC-H2294 header board both
496 
+// have 28F320C3-B flash memory part, Olimex LPC-L2294-1M development board has
497 
+// 28F160C3-B flash memory part. All boards have 16-bit access to it's flash
498 
+// devices.
499 
+static const CYG_FLASH_FUNS(hal_olpcx2294_flash_strata_funs,
500 
+    &cyg_strata_init_check_devid_16,
501 
+    &cyg_flash_devfn_query_nop,
502 
+    &cyg_strata_erase_16,
503 
+    &cyg_strata_program_16,
504 
+    (int (*)(struct cyg_flash_dev*, const cyg_flashaddr_t, void*, size_t))0,
505 
+    &cyg_strata_lock_k3_16,
506 
+    &cyg_strata_unlock_k3_16);
507 
+
508 
+static const cyg_strata_dev hal_olpcx2294_flash_priv = {
509 
+    .manufacturer_code = CYG_FLASH_STRATA_MANUFACTURER_INTEL,
510 
+#ifdef CYGPKG_HAL_ARM_LPC2XXX_OLPCL2294
511 
+    .device_code = 0x88c3, /* 16-Mbit x 16-B, 28F160C3-B */
512 
+#else
513 
+    .device_code = 0x88c5, /* 32-Mbit x 16-B, 28F320C3-B */
514 
+#endif
515 
+    .bufsize    = 1,
516 
+    .block_info = {
517 
+#ifdef CYGPKG_HAL_ARM_LPC2XXX_OLPCL2294
518 
+        { 0x00002000,  8 },/* boot bottom 8 x 8K blocks */
519 
+        { 0x00010000, 31 } /* 31 x 64K blocks */
520 
+#else
521 
+        { 0x00002000,  8 },/* boot bottom 8 x 8K blocks */
522 
+        { 0x00010000, 63 } /* 63 x 64K blocks */
523 
+#endif
524 
+    }
525 
+};
526 
+
527 
+CYG_FLASH_DRIVER(hal_olpcx2294_flash,
528 
+                 &hal_olpcx2294_flash_strata_funs,
529 
+                 0,
530 
+                 0x80000000,
531 
+#ifdef CYGPKG_HAL_ARM_LPC2XXX_OLPCL2294
532 
+                 0x801fffff,
533 
+#else
534 
+                 0x803fffff,
535 
+#endif
536 
+                 2,
537 
+                 hal_olpcx2294_flash_priv.block_info,
538 
+                 &hal_olpcx2294_flash_priv
539 
+);
540 
+
541 
+#endif//CYGPKG_DEVS_FLASH_STRATA_V2
542 
+// ------------------------------------------------------------------------
543 
+// EOF arm_olpcx2294_flash.c
544 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/ecos.db ../ecos-3.0/packages/ecos.db
545 8 qaztronic 
--- /opt/ecos-3.0/packages/ecos.db      2009-03-27 01:58:47.000000000 -0700
546 10 qaztronic 
+++ ../ecos-3.0/packages/ecos.db        2010-10-07 17:22:20.668111000 -0700
547 
@@ -6690,3 +6690,59 @@
548 8 qaztronic 
         to run eCos on the STM3210E EVAL board."
549 
 }
550 
 
551 
+
552 
+# --------------------
553 
+#
554 
+# --------------------
555 
+
556 10 qaztronic 
+package CYGPKG_DEVS_ETH_ARM_DE1_OLPCL2294 {
557 
+        alias           { "Ethernet driver for Terasic DE1 & Olimex LPC-L2294-1MB board" de1_olpcl2294_eth_driver }
558 
+        hardware
559 
+        directory       devs/eth/arm/de1_olpcl2294
560 
+        script          de1_olpcl2294_eth_drivers.cdl
561 
+        description     "
562 
+            Ethernet device driver for Terasic DE1 & Olimex LPC-L2294-1MB board."
563 
+}
564 8 qaztronic 
+
565 10 qaztronic 
+
566 8 qaztronic 
+package CYGPKG_DEVS_FLASH_ARM_DE1_OLPCX2294_V2 {
567 10 qaztronic 
+        alias           { "External Flash memory support for Terasic DE1 & Olimex LPC-L2294-1M" flash_olpcx2294_v2 }
568 8 qaztronic 
+        directory       devs/flash/arm/de1_olpcx2294
569 
+        script          flash_de1_olpcx2294.cdl
570 
+        hardware
571 
+        description "
572 
+            The flash_olpcx2294_v2 provides hardware support for external
573 10 qaztronic 
+            flash memory parts on the Terasic DE1 & Olimex LPC-L2294-1M
574 
+            boards. It uses eCos Flash v2 API."
575 8 qaztronic 
+}
576 
+
577 
+
578 
+package CYGPKG_HAL_ARM_LPC2XXX_DE1_OLPCL2294 {
579 
+        alias           { "Olimex LPC-L2294-1MB development and Terasic DE1 boards" hal_de1_olpcl2294_arm }
580 
+        directory       hal/arm/lpc2xxx/de1_olpcl2294
581 
+        script          hal_arm_lpc2xxx_de1_olpcl2294.cdl
582 
+        hardware
583 
+        description "
584 
+            The olpcl2294 HAL package provides the support needed to run
585 
+            eCos on Olimex LPC-L2294-1MB development and Terasic DE1 boards."
586 
+}
587 
+
588 
+
589 
+target de1_olpcl2294 {
590 
+        alias { "Olimex LPC-L2294-1MB development and Terasic DE1 boards" }
591 
+        packages { CYGPKG_HAL_ARM
592 
+                   CYGPKG_HAL_ARM_LPC2XXX
593 
+                   CYGPKG_HAL_ARM_LPC2XXX_DE1_OLPCL2294
594 
+                   CYGPKG_DEVS_FLASH_STRATA_V2
595 
+                   CYGPKG_DEVS_FLASH_ARM_DE1_OLPCX2294_V2
596 
+                   CYGPKG_DEVS_ETH_CL_CS8900A
597 10 qaztronic 
+                   CYGPKG_DEVS_ETH_ARM_DE1_OLPCL2294
598 8 qaztronic 
+                   CYGPKG_IO_SERIAL_GENERIC_16X5X
599 
+                   CYGPKG_IO_SERIAL_ARM_LPC2XXX
600 
+                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX
601 
+        }
602 
+        description "
603 
+            The olpcl2294 target provides the packages needed to run
604 
+            eCos on Olimex LPC-L2294-1MB development and Terasic DE1 boards."
605 
+}
606 
+
607 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/cdl/hal_arm_lpc2xxx_de1_olpcl2294.cdl ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/cdl/hal_arm_lpc2xxx_de1_olpcl2294.cdl
608 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/cdl/hal_arm_lpc2xxx_de1_olpcl2294.cdl     1969-12-31 16:00:00.000000000 -0800
609 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/cdl/hal_arm_lpc2xxx_de1_olpcl2294.cdl       2009-12-04 17:20:22.000000000 -0800
610 8 qaztronic 
@@ -0,0 +1,297 @@
611 
+# ====================================================================
612 
+#
613 
+#      hal_arm_lpc2xxx_de1_olpcl2294.cdl
614 
+#
615 
+#      ARM LPC2XXX OLPCL2294 development board package configuration
616 
+#      data
617 
+#
618 
+# ====================================================================
619 
+## ####ECOSGPLCOPYRIGHTBEGIN####
620 
+## -------------------------------------------
621 
+## This file is part of eCos, the Embedded Configurable Operating System.
622 
+## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
623 
+##
624 
+## eCos is free software; you can redistribute it and/or modify it under
625 
+## the terms of the GNU General Public License as published by the Free
626 
+## Software Foundation; either version 2 or (at your option) any later
627 
+## version.
628 
+##
629 
+## eCos is distributed in the hope that it will be useful, but WITHOUT
630 
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
631 
+## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
632 
+## for more details.
633 
+##
634 
+## You should have received a copy of the GNU General Public License
635 
+## along with eCos; if not, write to the Free Software Foundation, Inc.,
636 
+## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
637 
+##
638 
+## As a special exception, if other files instantiate templates or use
639 
+## macros or inline functions from this file, or you compile this file
640 
+## and link it with other works to produce a work based on this file,
641 
+## this file does not by itself cause the resulting work to be covered by
642 
+## the GNU General Public License. However the source code for this file
643 
+## must still be made available in accordance with section (3) of the GNU
644 
+## General Public License v2.
645 
+##
646 
+## This exception does not invalidate any other reasons why a work based
647 
+## on this file might be covered by the GNU General Public License.
648 
+## -------------------------------------------
649 
+## ####ECOSGPLCOPYRIGHTEND####
650 
+# ====================================================================
651 
+######DESCRIPTIONBEGIN####
652 
+#
653 
+# Author(s):      Sergei Gavrikov
654 
+# Contributors:   Sergei Gavrikov
655 
+# Date:           2008-08-31
656 
+#
657 
+#####DESCRIPTIONEND####
658 
+#
659 
+# ====================================================================
660 
+
661 
+cdl_package CYGPKG_HAL_ARM_LPC2XXX_DE1_OLPCL2294 {
662 
+    display       "Olimex LPC-L2294-1MB development and Terasic DE1 boards"
663 
+    parent        CYGPKG_HAL_ARM_LPC2XXX
664 
+    define_header hal_arm_lpc2xxx_de1_olpcl2294.h
665 
+    include_dir   cyg/hal
666 
+    hardware
667 
+    description   "
668 
+        The OLPCL2294 HAL package provides the support needed to run
669 
+        eCos on Olimex LPC-L2294-1MB development board."
670 
+
671 
+    compile       de1_olpcl2294_misc.c
672 
+
673 
+    requires      { CYGHWR_HAL_ARM_LPC2XXX == "LPC2294" }
674 
+
675 
+    define_proc {
676 
+        puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H   "
677 
+        puts $::cdl_system_header "#define CYGBLD_HAL_VARIANT_H  "
678 
+        puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H "
679 
+        puts $::cdl_header "#define HAL_PLATFORM_CPU    \"ARM7TDMI-S\""
680 
+        puts $::cdl_header "#define HAL_PLATFORM_BOARD  \"Olimex LPC-L2294-1MB development and Terasic DE1 boards\""
681 
+        puts $::cdl_header "#define HAL_PLATFORM_EXTRA  \"\""
682 
+    }
683 
+
684 
+    cdl_component CYG_HAL_STARTUP {
685 
+        display       "Startup type"
686 
+        flavor        data
687 
+        default_value {"RAM"}
688 
+        legal_values  {"RAM" "ROM"}
689 
+        no_define
690 
+        define -file system.h CYG_HAL_STARTUP
691 
+        description   "Choose RAM or ROM startup type."
692 
+    }
693 
+
694 
+    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
695 
+        display      "Default console channel."
696 
+        flavor       data
697 
+        calculated   0
698 
+    }
699 
+
700 
+    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
701 
+        display      "Number of communication channels on the board"
702 
+        flavor       data
703 
+        calculated   1
704 
+    }
705 
+
706 
+    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
707 
+        display          "Debug serial port"
708 
+        active_if        CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
709 
+        flavor data
710 
+        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
711 
+        default_value    0
712 
+        description      "
713 
+            There is one serial connector on the board."
714 
+     }
715 
+
716 
+     cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
717 
+         display          "Diagnostic serial port"
718 
+         active_if        CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
719 
+         flavor data
720 
+         legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
721 
+         default_value    CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
722 
+         description      "
723 
+            There is one serial connector on the board."
724 
+     }
725 
+
726 
+     cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
727 
+        display       "Diagnostic serial port baud rate"
728 
+        flavor        data
729 
+        legal_values  9600 19200 38400 57600 115200 230400
730 
+        default_value 38400
731 
+        description   "
732 
+            This option selects the baud rate used for the diagnostic
733 
+            port."
734 
+    }
735 
+
736 
+    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
737 
+         display       "GDB serial port baud rate"
738 
+         flavor        data
739 
+         legal_values  9600 19200 38400 57600 115200 230400
740 
+         default_value 38400
741 
+         description   "
742 
+            This option controls the baud rate used for the GDB
743 
+            connection."
744 
+    }
745 
+
746 
+    # Real-time clock/counter specifics
747 
+    cdl_option CYGNUM_HAL_ARM_LPC2XXX_XTAL_FREQ {
748 
+        display       "CPU xtal frequency"
749 
+        flavor        data
750 
+        default_value {14745600}
751 
+    }
752 
+
753 
+    cdl_option CYGNUM_HAL_ARM_LPC2XXX_PLL_MUL {
754 
+        display       "CPU PLL multiplier"
755 
+        flavor        data
756 
+        default_value {4}
757 
+    }
758 
+
759 
+    cdl_option CYGNUM_HAL_ARM_LPC2XXX_CLOCK_SPEED {
760 
+        display       "CPU clock speed"
761 
+        flavor        data
762 
+        calculated { CYGNUM_HAL_ARM_LPC2XXX_PLL_MUL *
763 
+                     CYGNUM_HAL_ARM_LPC2XXX_XTAL_FREQ }
764 
+    }
765 
+
766 
+    cdl_component CYGBLD_GLOBAL_OPTIONS {
767 
+        display "Global build options"
768 
+        flavor  none
769 
+        parent  CYGPKG_NONE
770 
+        description   "
771 
+            Global build options including control over compiler flags,
772 
+            linker flags and choice of toolchain."
773 
+
774 
+        cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
775 
+            display "Global command prefix"
776 
+            flavor  data
777 
+            no_define
778 
+            default_value { "arm-eabi" }
779 
+            description "
780 
+                This option specifies the command prefix used when
781 
+                invoking the build tools."
782 
+        }
783 
+
784 
+        cdl_option CYGBLD_GLOBAL_CFLAGS {
785 
+            display "Global compiler flags"
786 
+            flavor  data
787 
+            no_define
788 
+            default_value { CYGBLD_GLOBAL_WARNFLAGS . CYGBLD_ARCH_CFLAGS .
789 
+                            "-mcpu=arm7tdmi -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions" }
790 
+            description   "
791 
+                This option controls the global compiler flags which
792 
+                are used to compile all packages by default. Individual
793 
+                packages may define options which override these global
794 
+                flags."
795 
+        }
796 
+
797 
+        cdl_option CYGBLD_GLOBAL_LDFLAGS {
798 
+            display "Global linker flags"
799 
+            flavor  data
800 
+            no_define
801 
+            default_value { CYGBLD_ARCH_LDFLAGS . "-mcpu=arm7tdmi -Wl,--gc-sections -Wl,-static -g -nostdlib" }
802 
+            description   "
803 
+                This option controls the global linker flags. Individual
804 
+                packages may define options which override these global
805 
+                flags."
806 
+        }
807 
+    }
808 
+
809 
+    cdl_option CYGSEM_HAL_ROM_MONITOR {
810 
+        display       "Behave as a ROM monitor"
811 
+        flavor        bool
812 
+        default_value 0
813 
+        parent        CYGPKG_HAL_ROM_MONITOR
814 
+        requires      { CYG_HAL_STARTUP == "ROM" }
815 
+        description   "
816 
+            Enable this option if this program is to be used as a
817 
+            ROM monitor, i.e. applications will be loaded into RAM on
818 
+            the board, and this ROM monitor may process exceptions or
819 
+            interrupts generated from the application. This enables
820 
+            features such as utilizing a separate interrupt stack when
821 
+            exceptions are generated."
822 
+    }
823 
+
824 
+    cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
825 
+         display       "Work with a ROM monitor"
826 
+         flavor        booldata
827 
+         legal_values  { "Generic" "GDB_stubs" }
828 
+         default_value { CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 }
829 
+         parent        CYGPKG_HAL_ROM_MONITOR
830 
+         requires      { CYG_HAL_STARTUP == "RAM" }
831 
+         description   "
832 
+             Support can be enabled for different varieties of ROM
833 
+             monitor.  This support changes various eCos semantics such
834 
+             as the encoding of diagnostic output, or the overriding of
835 
+             hardware interrupt vectors.
836 
+             Firstly there is \"Generic\" support which prevents the
837 
+             HAL from overriding the hardware vectors that it does not
838 
+             use, to instead allow an installed ROM monitor to handle
839 
+             them. This is the most basic support which is likely to be
840 
+             common to most implementations of ROM monitor.
841 
+             \"GDB_stubs\" provides support when GDB stubs are included
842 
+             in the ROM monitor or boot ROM."
843 
+     }
844 
+
845 
+    cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
846 
+        display       "Redboot HAL options"
847 
+        flavor        none
848 
+        no_define
849 
+        parent        CYGPKG_REDBOOT
850 
+        active_if     CYGPKG_REDBOOT
851 
+        description   "
852 
+            This option lists the target's requirements for a valid
853 
+            Redboot configuration."
854 
+
855 
+        cdl_option CYGBLD_BUILD_REDBOOT_BIN {
856 
+            display       "Build Redboot ROM binary image"
857 
+            active_if     CYGBLD_BUILD_REDBOOT
858 
+            requires      { !CYGBLD_BUILD_REDBOOT_WITH_EXEC }
859 
+            default_value 1
860 
+            no_define
861 
+            description "
862 
+                This option enables the conversion of the Redboot ELF
863 
+                image to a binary image suitable for ROM programming."
864 
+
865 
+                compile -library=libextras.a redboot_cmds.c
866 
+
867 
+            compile -library=libextras.a redboot_cmds.c
868 
+
869 
+            make -priority 325 {
870 
+                /bin/redboot.bin : /bin/redboot.elf
871 
+                $(OBJCOPY) --strip-debug $< $(@:.bin=.img)
872 
+                $(OBJCOPY) -O srec $< $(@:.bin=.srec)
873 
+                $(OBJCOPY) -O ihex $< $(@:.bin=.hex)
874 
+                $(OBJCOPY) -O binary $< $@
875 
+            }
876 
+
877 
+        }
878 
+    }
879 
+
880 
+    cdl_component CYGHWR_MEMORY_LAYOUT {
881 
+        display "Memory layout"
882 
+        flavor data
883 
+        no_define
884 
+        calculated { (CYG_HAL_STARTUP == "RAM") ? "arm_lpc2xxx_de1_olpcl2294_ram" :
885 
+                                                  "arm_lpc2xxx_de1_olpcl2294_rom" }
886 
+        cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
887 
+            display "Memory layout linker script fragment"
888 
+            flavor data
889 
+            no_define
890 
+            define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
891 
+            calculated { (CYG_HAL_STARTUP == "RAM") ?
892 
+                             "" :
893 
+                             "" }
894 
+        }
895 
+
896 
+        cdl_option CYGHWR_MEMORY_LAYOUT_H {
897 
+            display "Memory layout header file"
898 
+            flavor data
899 
+            no_define
900 
+            define -file system.h CYGHWR_MEMORY_LAYOUT_H
901 
+            calculated { (CYG_HAL_STARTUP == "RAM") ?
902 
+                             "" :
903 
+                             "" }
904 
+        }
905 
+    }
906 
+}
907 
+
908 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/hal_platform_setup.h ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/hal_platform_setup.h
909 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/hal_platform_setup.h      1969-12-31 16:00:00.000000000 -0800
910 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/hal_platform_setup.h        2009-12-04 15:45:06.000000000 -0800
911 8 qaztronic 
@@ -0,0 +1,230 @@
912 
+#ifndef CYGONCE_HAL_PLATFORM_SETUP_H
913 
+#define CYGONCE_HAL_PLATFORM_SETUP_H
914 
+/*=============================================================================
915 
+//
916 
+//      hal_platform_setup.h
917 
+//
918 
+//      Platform specific support for HAL (assembly code)
919 
+//
920 
+//=============================================================================
921 
+// ####ECOSGPLCOPYRIGHTBEGIN####
922 
+// -------------------------------------------
923 
+// This file is part of eCos, the Embedded Configurable Operating System.
924 
+// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
925 
+//
926 
+// eCos is free software; you can redistribute it and/or modify it under
927 
+// the terms of the GNU General Public License as published by the Free
928 
+// Software Foundation; either version 2 or (at your option) any later
929 
+// version.
930 
+//
931 
+// eCos is distributed in the hope that it will be useful, but WITHOUT
932 
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
933 
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
934 
+// for more details.
935 
+//
936 
+// You should have received a copy of the GNU General Public License
937 
+// along with eCos; if not, write to the Free Software Foundation, Inc.,
938 
+// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
939 
+//
940 
+// As a special exception, if other files instantiate templates or use
941 
+// macros or inline functions from this file, or you compile this file
942 
+// and link it with other works to produce a work based on this file,
943 
+// this file does not by itself cause the resulting work to be covered by
944 
+// the GNU General Public License. However the source code for this file
945 
+// must still be made available in accordance with section (3) of the GNU
946 
+// General Public License v2.
947 
+//
948 
+// This exception does not invalidate any other reasons why a work based
949 
+// on this file might be covered by the GNU General Public License.
950 
+// -------------------------------------------
951 
+// ####ECOSGPLCOPYRIGHTEND####
952 
+//=============================================================================
953 
+//#####DESCRIPTIONBEGIN####
954 
+//
955 
+// Author(s):     Sergei Gavrikov
956 
+// Contributors:  Sergei Gavrikov
957 
+// Date:          2008-08-31
958 
+// Purpose:       Olimex LPC-L2294-1MB platform specific support routines
959 
+// Description:
960 
+// Usage:         #include
961 
+//
962 
+//####DESCRIPTIONEND####
963 
+//
964 
+//===========================================================================*/
965 
+
966 
+#include
967 
+#include
968 
+#include
969 
+
970 
+        // There is one only diagnostic led marked STAT on the board
971 
+        // |P1.23  330 Om    LED
972 
+        // |------\/\/\/-----|<|-----> 3.3 V
973 
+        // |
974 
+
975 
+        .macro  _led_init
976 
+        ldr r0,=CYGARC_HAL_LPC2XXX_REG_IO_BASE
977 
+        ldr r1,[r0,#CYGARC_HAL_LPC2XXX_REG_IO1DIR]
978 
+        orr r1,r1,#(1<<23)
979 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_IO1DIR]
980 
+
981 
+        .endm // _led_init
982 
+
983 
+        .macro _led x
984 
+        ldr r0,=CYGARC_HAL_LPC2XXX_REG_IO_BASE
985 
+        ldr r1,=(1<<23)
986 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_IO1SET]
987 
+        ldr r1,=((\x & 1)<<23)
988 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_IO1CLR]
989 
+
990 
+        .endm // _led
991 
+
992 
+        .macro _pll_init
993 
+        ldr r0,=CYGARC_HAL_LPC2XXX_REG_SCB_BASE
994 
+
995 
+        mov r2,#0xAA
996 
+        mov r3,#0x55
997 
+
998 
+        // enable PLL
999 
+        mov r1,#1
1000 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLCON]
1001 
+
1002 
+        mov r1,#(0x20 | (CYGNUM_HAL_ARM_LPC2XXX_PLL_MUL - 1))
1003 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLCFG]
1004 
+
1005 
+        // update PLL registers
1006 
+        str r2,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLFEED]
1007 
+        str r3,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLFEED]
1008 
+
1009 
+        // wait for it to lock
1010 
+1:
1011 
+        ldr r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLSTAT]
1012 
+        ands r1,r1,#(1<<10)
1013 
+        beq 1b
1014 
+
1015 
+        // connect PLL
1016 
+        mov r1,#3
1017 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLCON]
1018 
+
1019 
+        // update PLL registers
1020 
+        str r2,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLFEED]
1021 
+        str r3,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLFEED]
1022 
+
1023 
+        .endm // _pll_init
1024 
+
1025 
+        .macro _mem_init
1026 
+        // copy first 64 bytes from ROM to on-chip RAM
1027 
+        mov r0,#0
1028 
+        mov r1,#0x40000000
1029 
+        mov r2,#0x40
1030 
+1:
1031 
+        ldr r3,[r0,#4]!
1032 
+        str r3,[r1,#4]!
1033 
+        cmps r0,r2
1034 
+        bne 1b
1035 
+
1036 
+        ldr r0,=CYGARC_HAL_LPC2XXX_REG_SCB_BASE
1037 
+        mov r1,#2 // interrupt vector table is mapped to RAM
1038 
+        str r1, [r0,#CYGARC_HAL_LPC2XXX_REG_MEMMAP]
1039 
+        // flash timings
1040 
+        mov r1,#4
1041 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_MAMTIM]
1042 
+        mov r1,#2 // 2, full MAM
1043 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_MAMCR]
1044 
+
1045 
+        // External memory interface depends on the bank width (32, 16 or 8 bit
1046 
+        // selected via MW bits in corresponding BCFG register).  Furthermore,
1047 
+        // choice of the memory chip(s) will require an adequate setup of RBLE
1048 
+        // bit in BCFG register, too. RBLE = 0 in case of 8-bit based external
1049 
+        // memories, while memory chips capable of accepting 16 or 32 bit wide
1050 
+        // data will work with RBLE = 1.
1051 
+        //
1052 
+        // BANK0: 2M FLASH
1053 
+        // TE28F160C3BD70 (1024Kx16 x 1, 70nS)
1054 
+        ldr r0,=CYGARC_HAL_LPC2XXX_REG_BCFG0
1055 
+        ldr r1,=  (0x3 << 0)    /* IDCY=3, idle timing  */\
1056 
+                | (0x4 << 5)    /* WST1=4, read timing  */\
1057 
+                | (0x1 << 10)   /* RBLE=1               */\
1058 
+                | (0x6 << 11)   /* WST2=6, write timing */\
1059 
+                | (0x1 << 28)   /* MW=1,   16-bits      */
1060 
+        str r1,[r0]
1061 
+
1062 
+        // BANK1: 1M RAM
1063 
+        // K6R4016V1D (512Kx16 x 2, 10nS)
1064 
+        ldr r0,=CYGARC_HAL_LPC2XXX_REG_BCFG1
1065 
+        // Warning: changed these timings, you can fall dramatically the eCos
1066 
+        // kernel performance. Check it then using the eCos 'tm_basic' test.
1067 
+        ldr r1,=  (0x0 << 0)    /* IDCY=0, idle cycles  */\
1068 
+                | (0x0 << 5)    /* WST1=0, read timing  */\
1069 
+                | (0x1 << 10)   /* RBLE=1               */\
1070 
+                | (0x0 << 11)   /* WST2=0, write timing */\
1071 
+                | (0x2 << 28)   /* MW=2,   32-bits      */
1072 
+        str r1,[r0]
1073 
+
1074 
+        // BANK2: Ethernet
1075 
+        // CS8900A (16-bit, an interrupt driven mode)
1076 
+        ldr r0,=CYGARC_HAL_LPC2XXX_REG_BCFG2
1077 
+        ldr r1,=  (0x1 << 0)    /* IDCY=1, idle cycles  */\
1078 
+                | (0x8 << 5)    /* WST1=8, read timing  */\
1079 
+                | (0x1 << 10)   /* RBLE=1               */\
1080 
+                | (0x6 << 11)   /* WST2=6, write timing */\
1081 
+                | (0x1 << 28)   /* MW=1,   16-bits      */
1082 
+        str r1,[r0]
1083 
+
1084 
+        .endm // _mem_init
1085 
+
1086 
+        .macro _gpio_init
1087 
+        ldr r0,=CYGARC_HAL_LPC2XXX_REG_PIN_BASE
1088 
+
1089 
+        // Configure P0.15:0 as PIO, but UART0, EINT2
1090 
+        ldr r1,=  (0x1 << 0)    /* P0.0 as TxD0         */\
1091 
+                | (0x1 << 2)    /* P0.1 as RxD0         */\
1092 
+                | (0x2 << 30)   /* P0.1 as EINT2(CL/IRQ)*/
1093 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PINSEL0]
1094 
+
1095 
+        // Configure P0.30:16 as PIO, but EINT0 ('BUT' button)
1096 
+        ldr r1,=  (0x1 << 0)    /* P0.16 as EINT0       */
1097 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PINSEL1]
1098 
+
1099 
+        // GPIO P1.25:16, P3.24 are used as PIO
1100 
+        ldr r1,=  (0x1 << 2)    /* P1.31:26 Debug port  */\
1101 
+                | (0x2 << 4)    /* D31:0,CS0,OE,BLS0-3  */\
1102 
+                | (0x1 << 8)    /* WE enabled           */\
1103 
+                | (0x1 << 11)   /* CS1 enabled          */\
1104 
+                | (0x1 << 14)   /* CS2 enabled          */\
1105 
+                | (0x1 << 23)   /* A0 enabled           */\
1106 
+                | (0x1 << 24)   /* A1 enabled           */\
1107 
+                | (0x7 << 25)   /* A23:2 enabled        */
1108 
+        str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PINSEL2]
1109 
+
1110 
+        .endm // _gpio_init
1111 
+
1112 
+#define CYGHWR_LED_MACRO _led \x
1113 
+
1114 
+#if defined(CYG_HAL_STARTUP_ROM)
1115 
+
1116 
+        .macro  _setup
1117 
+
1118 
+        _pll_init
1119 
+
1120 
+        _mem_init
1121 
+
1122 
+        _gpio_init
1123 
+
1124 
+        _led_init
1125 
+
1126 
+        .endm
1127 
+
1128 
+#define CYGSEM_HAL_ROM_RESET_USES_JUMP
1129 
+
1130 
+#else
1131 
+
1132 
+        .macro  _setup
1133 
+
1134 
+        .endm
1135 
+
1136 
+#endif // CYG_HAL_STARTUP_ROM
1137 
+
1138 
+#define PLATFORM_SETUP1     _setup
1139 
+
1140 
+#endif // CYGONCE_HAL_PLATFORM_SETUP_H
1141 
+
1142 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_ram.h ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_ram.h
1143 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_ram.h       1969-12-31 16:00:00.000000000 -0800
1144 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_ram.h 2009-12-04 15:45:06.000000000 -0800
1145 8 qaztronic 
@@ -0,0 +1,19 @@
1146 
+#ifndef __ASSEMBLER__
1147 
+#include
1148 
+#include
1149 
+
1150 
+#endif
1151 
+
1152 
+#define CYGMEM_REGION_ram (0x81000000)
1153 
+#define CYGMEM_REGION_ram_SIZE (0x00100000)
1154 
+#define CYGMEM_REGION_ram_ATTR (CYGMEM_REGION_ATTR_R | CYGMEM_REGION_ATTR_W)
1155 
+
1156 
+#ifndef __ASSEMBLER__
1157 
+extern char CYG_LABEL_NAME (__heap1) [];
1158 
+
1159 
+#endif
1160 
+
1161 
+#define CYGMEM_SECTION_heap1 (CYG_LABEL_NAME (__heap1))
1162 
+
1163 
+#define CYGMEM_SECTION_heap1_SIZE (0x81100000 - (size_t) CYG_LABEL_NAME (__heap1))
1164 
+
1165 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_ram.ldi ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_ram.ldi
1166 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_ram.ldi     1969-12-31 16:00:00.000000000 -0800
1167 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_ram.ldi       2009-12-04 15:45:06.000000000 -0800
1168 8 qaztronic 
@@ -0,0 +1,25 @@
1169 
+#include
1170 
+
1171 
+MEMORY
1172 
+{
1173 
+    ram0 : ORIGIN = 0x40000000, LENGTH = 0x4000
1174 
+    ram  : ORIGIN = 0x81000000, LENGTH = 0x100000
1175 
+}
1176 
+
1177 
+SECTIONS
1178 
+{
1179 
+    SECTIONS_BEGIN
1180 
+    SECTION_fixed_vectors (ram0, 0x40000020, LMA_EQ_VMA)
1181 
+    SECTION_rom_vectors (ram, 0x81010000, LMA_EQ_VMA)
1182 
+    SECTION_text (ram, ALIGN (0x4), LMA_EQ_VMA)
1183 
+    SECTION_fini (ram, ALIGN (0x4), LMA_EQ_VMA)
1184 
+    SECTION_rodata (ram, ALIGN (0x4), LMA_EQ_VMA)
1185 
+    SECTION_rodata1 (ram, ALIGN (0x4), LMA_EQ_VMA)
1186 
+    SECTION_fixup (ram, ALIGN (0x4), LMA_EQ_VMA)
1187 
+    SECTION_gcc_except_table (ram, ALIGN (0x4), LMA_EQ_VMA)
1188 
+    SECTION_data (ram, ALIGN (0x4), LMA_EQ_VMA)
1189 
+    SECTION_bss (ram, ALIGN (0x4), LMA_EQ_VMA)
1190 
+    CYG_LABEL_DEFN(__heap1) = ALIGN (0x8);
1191 
+    SECTIONS_END
1192 
+}
1193 
+
1194 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_rom.h ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_rom.h
1195 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_rom.h       1969-12-31 16:00:00.000000000 -0800
1196 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_rom.h 2009-12-04 15:45:06.000000000 -0800
1197 8 qaztronic 
@@ -0,0 +1,22 @@
1198 
+#ifndef __ASSEMBLER__
1199 
+#include
1200 
+#include
1201 
+
1202 
+#endif
1203 
+
1204 
+#define CYGMEM_REGION_rom (0x00000000)
1205 
+#define CYGMEM_REGION_rom_SIZE (0x00040000)
1206 
+#define CYGMEM_REGION_rom_ATTR (CYGMEM_REGION_ATTR_R)
1207 
+#define CYGMEM_REGION_ram (0x81000000)
1208 
+#define CYGMEM_REGION_ram_SIZE (0x00100000)
1209 
+#define CYGMEM_REGION_ram_ATTR (CYGMEM_REGION_ATTR_R | CYGMEM_REGION_ATTR_W)
1210 
+
1211 
+#ifndef __ASSEMBLER__
1212 
+extern char CYG_LABEL_NAME (__heap1) [];
1213 
+
1214 
+#endif
1215 
+
1216 
+#define CYGMEM_SECTION_heap1 (CYG_LABEL_NAME (__heap1))
1217 
+
1218 
+#define CYGMEM_SECTION_heap1_SIZE (0x81100000 - (size_t) CYG_LABEL_NAME (__heap1))
1219 
+
1220 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_rom.ldi ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_rom.ldi
1221 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_rom.ldi     1969-12-31 16:00:00.000000000 -0800
1222 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/pkgconf/mlt_arm_lpc2xxx_de1_olpcl2294_rom.ldi       2009-12-04 15:45:06.000000000 -0800
1223 8 qaztronic 
@@ -0,0 +1,26 @@
1224 
+#include
1225 
+
1226 
+MEMORY
1227 
+{
1228 
+    ram0   : ORIGIN = 0x40000000, LENGTH = 0x4000
1229 
+    ram    : ORIGIN = 0x81000000, LENGTH = 0x100000
1230 
+    rom    : ORIGIN = 0x00000000, LENGTH = 0x40000
1231 
+}
1232 
+
1233 
+SECTIONS
1234 
+{
1235 
+    SECTIONS_BEGIN
1236 
+    SECTION_rom_vectors (rom, 0x00000000, LMA_EQ_VMA)
1237 
+    SECTION_text (rom, ALIGN (0x4), LMA_EQ_VMA)
1238 
+    SECTION_fini (rom, ALIGN (0x4), LMA_EQ_VMA)
1239 
+    SECTION_rodata (rom, ALIGN (0x4), LMA_EQ_VMA)
1240 
+    SECTION_rodata1 (rom, ALIGN (0x4), LMA_EQ_VMA)
1241 
+    SECTION_fixup (rom, ALIGN (0x4), LMA_EQ_VMA)
1242 
+    SECTION_gcc_except_table (rom, ALIGN (0x4), LMA_EQ_VMA)
1243 
+    SECTION_fixed_vectors (ram0, 0x40000020, LMA_EQ_VMA)
1244 
+    SECTION_data (ram, 0x81000000, FOLLOWING (.gcc_except_table))
1245 
+    SECTION_bss (ram, ALIGN (0x4), LMA_EQ_VMA)
1246 
+    CYG_LABEL_DEFN(__heap1) = ALIGN (0x8);
1247 
+    SECTIONS_END
1248 
+}
1249 
+
1250 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/plf_io.h ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/plf_io.h
1251 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/plf_io.h  1969-12-31 16:00:00.000000000 -0800
1252 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/include/plf_io.h    2009-12-04 15:45:06.000000000 -0800
1253 8 qaztronic 
@@ -0,0 +1,66 @@
1254 
+#ifndef CYGONCE_HAL_PLF_IO_H
1255 
+#define CYGONCE_HAL_PLF_IO_H
1256 
+//=============================================================================
1257 
+//
1258 
+//      plf_io.h
1259 
+//
1260 
+//      Olimex LPC-L2294-1MB board specific registers
1261 
+//
1262 
+//=============================================================================
1263 
+// ####ECOSGPLCOPYRIGHTBEGIN####
1264 
+// -------------------------------------------
1265 
+// This file is part of eCos, the Embedded Configurable Operating System.
1266 
+// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
1267 
+//
1268 
+// eCos is free software; you can redistribute it and/or modify it under
1269 
+// the terms of the GNU General Public License as published by the Free
1270 
+// Software Foundation; either version 2 or (at your option) any later
1271 
+// version.
1272 
+//
1273 
+// eCos is distributed in the hope that it will be useful, but WITHOUT
1274 
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
1275 
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
1276 
+// for more details.
1277 
+//
1278 
+// You should have received a copy of the GNU General Public License
1279 
+// along with eCos; if not, write to the Free Software Foundation, Inc.,
1280 
+// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
1281 
+//
1282 
+// As a special exception, if other files instantiate templates or use
1283 
+// macros or inline functions from this file, or you compile this file
1284 
+// and link it with other works to produce a work based on this file,
1285 
+// this file does not by itself cause the resulting work to be covered by
1286 
+// the GNU General Public License. However the source code for this file
1287 
+// must still be made available in accordance with section (3) of the GNU
1288 
+// General Public License v2.
1289 
+//
1290 
+// This exception does not invalidate any other reasons why a work based
1291 
+// on this file might be covered by the GNU General Public License.
1292 
+// -------------------------------------------
1293 
+// ####ECOSGPLCOPYRIGHTEND####
1294 
+//=============================================================================
1295 
+//#####DESCRIPTIONBEGIN####
1296 
+//
1297 
+// Author(s):     Sergei Gavrikov
1298 
+// Contributors:  Sergei Gavrikov
1299 
+// Date:          2008-08-31
1300 
+// Purpose:       Olimex LPC-L2294-1MB board specific registers
1301 
+// Description:
1302 
+// Usage:         #include
1303 
+//
1304 
+//####DESCRIPTIONEND####
1305 
+//
1306 
+//=============================================================================
1307 
+// On-chip device base addresses
1308 
+
1309 
+#ifndef __ASSEMBLER__
1310 
+extern void hal_plf_hardware_init(void);
1311 
+#define HAL_PLF_HARDWARE_INIT() \
1312 
+            hal_plf_hardware_init()
1313 
+
1314 
+#endif // __ASSEMBLER__
1315 
+
1316 
+//-----------------------------------------------------------------------------
1317 
+// end of plf_io.h
1318 
+#endif // CYGONCE_HAL_PLF_IO_H
1319 
+
1320 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/LPC2294_ram.ecm ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/LPC2294_ram.ecm
1321 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/LPC2294_ram.ecm      1969-12-31 16:00:00.000000000 -0800
1322 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/LPC2294_ram.ecm        2010-10-06 15:29:52.656568600 -0700
1323 
@@ -0,0 +1,197 @@
1324 
+cdl_savefile_version 1;
1325 
+cdl_savefile_command cdl_savefile_version {};
1326 
+cdl_savefile_command cdl_savefile_command {};
1327 
+cdl_savefile_command cdl_configuration { description hardware template package };
1328 
+cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
1329 
+cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
1330 
+cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
1331 
+cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
1332 
+
1333 
+cdl_configuration eCos {
1334 
+    description "" ;
1335 
+    hardware    de1_olpcl2294 ;
1336 
+    template    default ;
1337 
+    package -template CYGPKG_HAL v3_0 ;
1338 
+    package -template CYGPKG_IO v3_0 ;
1339 
+    package -template CYGPKG_IO_SERIAL v3_0 ;
1340 
+    package -template CYGPKG_INFRA v3_0 ;
1341 
+    package -template CYGPKG_KERNEL v3_0 ;
1342 
+    package -template CYGPKG_MEMALLOC v3_0 ;
1343 
+    package -template CYGPKG_ISOINFRA v3_0 ;
1344 
+    package -template CYGPKG_LIBC v3_0 ;
1345 
+    package -template CYGPKG_LIBC_I18N v3_0 ;
1346 
+    package -template CYGPKG_LIBC_SETJMP v3_0 ;
1347 
+    package -template CYGPKG_LIBC_SIGNALS v3_0 ;
1348 
+    package -template CYGPKG_LIBC_STARTUP v3_0 ;
1349 
+    package -template CYGPKG_LIBC_STDIO v3_0 ;
1350 
+    package -template CYGPKG_LIBC_STDLIB v3_0 ;
1351 
+    package -template CYGPKG_LIBC_STRING v3_0 ;
1352 
+    package -template CYGPKG_LIBC_TIME v3_0 ;
1353 
+    package -template CYGPKG_LIBM v3_0 ;
1354 
+    package -template CYGPKG_IO_WALLCLOCK v3_0 ;
1355 
+    package -template CYGPKG_ERROR v3_0 ;
1356 
+    package -hardware CYGPKG_HAL_ARM v3_0 ;
1357 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX v3_0 ;
1358 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX_DE1_OLPCL2294 v3_0 ;
1359 
+    package -hardware CYGPKG_DEVS_FLASH_STRATA_V2 v3_0 ;
1360 
+    package -hardware CYGPKG_DEVS_FLASH_ARM_DE1_OLPCX2294_V2 v3_0 ;
1361 
+    package -hardware CYGPKG_DEVS_ETH_CL_CS8900A v3_0 ;
1362 
+    package -hardware CYGPKG_DEVS_ETH_ARM_OLPCL2294 v3_0 ;
1363 
+    package -hardware CYGPKG_IO_SERIAL_GENERIC_16X5X v3_0 ;
1364 
+    package -hardware CYGPKG_IO_SERIAL_ARM_LPC2XXX v3_0 ;
1365 
+    package -hardware CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX v3_0 ;
1366 
+};
1367 
+
1368 
+cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
1369 
+    user_value 0
1370 
+};
1371 
+
1372 
+cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
1373 
+    user_value 0 GDB_stubs
1374 
+};
1375 
+
1376 
+cdl_component CYGHWR_HAL_ARM_LPC2XXX {
1377 
+    user_value LPC2294
1378 
+};
1379 
+
1380 
+cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
1381 
+    user_value 38400
1382 
+};
1383 
+
1384 
+cdl_option CYGNUM_HAL_ARM_LPC2XXX_PLL_MUL {
1385 
+    user_value 2
1386 
+};
1387 
+
1388 
+cdl_option CYGOPT_IO_SERIAL_SUPPORT_NONBLOCKING {
1389 
+    user_value 0
1390 
+};
1391 
+
1392 
+cdl_option CYGDAT_IO_SERIAL_TTY_CONSOLE {
1393 
+    user_value "\"/dev/tty0\""
1394 
+};
1395 
+
1396 
+cdl_component CYGPKG_IO_SERIAL_TTY_TTY0 {
1397 
+    user_value 1
1398 
+};
1399 
+
1400 
+cdl_option CYGDAT_IO_SERIAL_TTY_TTY0_DEV {
1401 
+    user_value "\"/dev/ser0\""
1402 
+};
1403 
+
1404 
+cdl_component CYGPKG_IO_SERIAL_DEVICES {
1405 
+    user_value 1
1406 
+};
1407 
+
1408 
+cdl_option CYGPKG_IO_SERIAL_GENERIC_16X5X_XMIT_REQUIRE_PRIME {
1409 
+    user_value 1
1410 
+};
1411 
+
1412 
+cdl_option CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT {
1413 
+    user_value 0
1414 
+};
1415 
+
1416 
+cdl_option CYGBLD_ISO_CTYPE_HEADER {
1417 
+    inferred_value 1
1418 
+};
1419 
+
1420 
+cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
1421 
+    inferred_value 1
1422 
+};
1423 
+
1424 
+cdl_option CYGBLD_ISO_ERRNO_HEADER {
1425 
+    inferred_value 1
1426 
+};
1427 
+
1428 
+cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
1429 
+    inferred_value 1
1430 
+};
1431 
+
1432 
+cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
1433 
+    inferred_value 1
1434 
+};
1435 
+
1436 
+cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
1437 
+    inferred_value 1
1438 
+};
1439 
+
1440 
+cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
1441 
+    inferred_value 1
1442 
+};
1443 
+
1444 
+cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
1445 
+    inferred_value 1
1446 
+};
1447 
+
1448 
+cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
1449 
+    inferred_value 1
1450 
+};
1451 
+
1452 
+cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
1453 
+    inferred_value 1
1454 
+};
1455 
+
1456 
+cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
1457 
+    inferred_value 1
1458 
+};
1459 
+
1460 
+cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
1461 
+    inferred_value 1
1462 
+};
1463 
+
1464 
+cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
1465 
+    inferred_value 1
1466 
+};
1467 
+
1468 
+cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
1469 
+    inferred_value 1
1470 
+};
1471 
+
1472 
+cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
1473 
+    inferred_value 1
1474 
+};
1475 
+
1476 
+cdl_option CYGBLD_ISO_STRERROR_HEADER {
1477 
+    inferred_value 1
1478 
+};
1479 
+
1480 
+cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
1481 
+    inferred_value 1
1482 
+};
1483 
+
1484 
+cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
1485 
+    inferred_value 1
1486 
+};
1487 
+
1488 
+cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
1489 
+    inferred_value 1
1490 
+};
1491 
+
1492 
+cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
1493 
+    inferred_value 1
1494 
+};
1495 
+
1496 
+cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
1497 
+    inferred_value 1
1498 
+};
1499 
+
1500 
+cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
1501 
+    inferred_value 1
1502 
+};
1503 
+
1504 
+cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
1505 
+    inferred_value 1
1506 
+};
1507 
+
1508 
+cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
1509 
+    inferred_value 1
1510 
+};
1511 
+
1512 
+cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
1513 
+    inferred_value 1
1514 
+};
1515 
+
1516 
+cdl_option CYGBLD_ISO_SETJMP_HEADER {
1517 
+    inferred_value 1
1518 
+};
1519 
+
1520 
+
1521 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/net_LPC2294_ram.ecm ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/net_LPC2294_ram.ecm
1522 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/net_LPC2294_ram.ecm  1969-12-31 16:00:00.000000000 -0800
1523 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/net_LPC2294_ram.ecm    2010-10-07 17:28:11.174762800 -0700
1524 
@@ -0,0 +1,332 @@
1525 
+cdl_savefile_version 1;
1526 
+cdl_savefile_command cdl_savefile_version {};
1527 
+cdl_savefile_command cdl_savefile_command {};
1528 
+cdl_savefile_command cdl_configuration { description hardware template package };
1529 
+cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
1530 
+cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
1531 
+cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
1532 
+cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
1533 
+
1534 
+cdl_configuration eCos {
1535 
+    description "" ;
1536 
+    hardware    de1_olpcl2294 ;
1537 
+    template    net ;
1538 
+    package -hardware CYGPKG_HAL_ARM v3_0 ;
1539 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX v3_0 ;
1540 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX_DE1_OLPCL2294 v3_0 ;
1541 
+    package -hardware CYGPKG_DEVS_FLASH_STRATA_V2 v3_0 ;
1542 
+    package -hardware CYGPKG_DEVS_FLASH_ARM_DE1_OLPCX2294_V2 v3_0 ;
1543 
+    package -hardware CYGPKG_DEVS_ETH_CL_CS8900A v3_0 ;
1544 
+    package -hardware CYGPKG_DEVS_ETH_ARM_DE1_OLPCL2294 v3_0 ;
1545 
+    package -hardware CYGPKG_IO_SERIAL_GENERIC_16X5X v3_0 ;
1546 
+    package -hardware CYGPKG_IO_SERIAL_ARM_LPC2XXX v3_0 ;
1547 
+    package -hardware CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX v3_0 ;
1548 
+    package -template CYGPKG_HAL v3_0 ;
1549 
+    package -template CYGPKG_IO v3_0 ;
1550 
+    package -template CYGPKG_IO_SERIAL v3_0 ;
1551 
+    package -template CYGPKG_INFRA v3_0 ;
1552 
+    package -template CYGPKG_ISOINFRA v3_0 ;
1553 
+    package -template CYGPKG_KERNEL v3_0 ;
1554 
+    package -template CYGPKG_MEMALLOC v3_0 ;
1555 
+    package -template CYGPKG_LIBC v3_0 ;
1556 
+    package -template CYGPKG_LIBC_TIME v3_0 ;
1557 
+    package -template CYGPKG_LIBC_STDLIB v3_0 ;
1558 
+    package -template CYGPKG_LIBC_STRING v3_0 ;
1559 
+    package -template CYGPKG_LIBC_I18N v3_0 ;
1560 
+    package -template CYGPKG_LIBC_SETJMP v3_0 ;
1561 
+    package -template CYGPKG_LIBC_STARTUP v3_0 ;
1562 
+    package -template CYGPKG_LIBC_STDIO v3_0 ;
1563 
+    package -template CYGPKG_LIBM v3_0 ;
1564 
+    package -template CYGPKG_POSIX v3_0 ;
1565 
+    package -template CYGPKG_IO_WATCHDOG v3_0 ;
1566 
+    package -template CYGPKG_IO_WALLCLOCK v3_0 ;
1567 
+    package -template CYGPKG_ERROR v3_0 ;
1568 
+    package -template CYGPKG_IO_FILEIO v3_0 ;
1569 
+    package -template CYGPKG_NET v3_0 ;
1570 
+    package -template CYGPKG_NET_FREEBSD_STACK v3_0 ;
1571 
+    package -template CYGPKG_NS_DNS v3_0 ;
1572 
+    package -template CYGPKG_IO_ETH_DRIVERS v3_0 ;
1573 
+    package -template CYGPKG_NET_SNTP v3_0 ;
1574 
+    package CYGPKG_HTTPD v3_0 ;
1575 
+};
1576 
+
1577 
+cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1578 
+    user_value 0
1579 
+};
1580 
+
1581 
+cdl_option CYGSEM_HAL_DIAG_MANGLER {
1582 
+    user_value GDB
1583 
+};
1584 
+
1585 
+cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
1586 
+    user_value 0
1587 
+};
1588 
+
1589 
+cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
1590 
+    user_value 0 GDB_stubs
1591 
+};
1592 
+
1593 
+cdl_component CYGHWR_HAL_ARM_LPC2XXX {
1594 
+    user_value LPC2294
1595 
+    inferred_value LPC2294
1596 
+};
1597 
+
1598 
+cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
1599 
+    user_value 38400
1600 
+};
1601 
+
1602 
+cdl_option CYGNUM_HAL_ARM_LPC2XXX_PLL_MUL {
1603 
+    user_value 2
1604 
+};
1605 
+
1606 
+cdl_option CYGDAT_IO_SERIAL_TTY_CONSOLE {
1607 
+    user_value "\"/dev/tty0\""
1608 
+};
1609 
+
1610 
+cdl_component CYGPKG_IO_SERIAL_TTY_TTY0 {
1611 
+    user_value 1
1612 
+};
1613 
+
1614 
+cdl_component CYGPKG_IO_SERIAL_TERMIOS {
1615 
+    user_value 0
1616 
+};
1617 
+
1618 
+cdl_component CYGPKG_IO_SERIAL_DEVICES {
1619 
+    user_value 1
1620 
+};
1621 
+
1622 
+cdl_option CYGPKG_IO_SERIAL_GENERIC_16X5X_XMIT_REQUIRE_PRIME {
1623 
+    user_value 1
1624 
+};
1625 
+
1626 
+cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
1627 
+    user_value 0
1628 
+};
1629 
+
1630 
+cdl_option CYGBLD_ISO_CTYPE_HEADER {
1631 
+    inferred_value 1
1632 
+};
1633 
+
1634 
+cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
1635 
+    inferred_value 1
1636 
+};
1637 
+
1638 
+cdl_option CYGBLD_ISO_ERRNO_HEADER {
1639 
+    inferred_value 1
1640 
+};
1641 
+
1642 
+cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
1643 
+    inferred_value 1
1644 
+};
1645 
+
1646 
+cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
1647 
+    inferred_value 1
1648 
+};
1649 
+
1650 
+cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
1651 
+    inferred_value 1
1652 
+};
1653 
+
1654 
+cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
1655 
+    inferred_value 1
1656 
+};
1657 
+
1658 
+cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
1659 
+    inferred_value 1
1660 
+};
1661 
+
1662 
+cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
1663 
+    inferred_value 1
1664 
+};
1665 
+
1666 
+cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
1667 
+    inferred_value 1
1668 
+};
1669 
+
1670 
+cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
1671 
+    inferred_value 1
1672 
+};
1673 
+
1674 
+cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
1675 
+    inferred_value 1
1676 
+};
1677 
+
1678 
+cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
1679 
+    inferred_value 1
1680 
+};
1681 
+
1682 
+cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
1683 
+    inferred_value 1
1684 
+};
1685 
+
1686 
+cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
1687 
+    inferred_value 1
1688 
+};
1689 
+
1690 
+cdl_option CYGBLD_ISO_STRERROR_HEADER {
1691 
+    inferred_value 1
1692 
+};
1693 
+
1694 
+cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
1695 
+    inferred_value 1
1696 
+};
1697 
+
1698 
+cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
1699 
+    inferred_value 1
1700 
+};
1701 
+
1702 
+cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
1703 
+    inferred_value 1
1704 
+};
1705 
+
1706 
+cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
1707 
+    inferred_value 1
1708 
+};
1709 
+
1710 
+cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
1711 
+    inferred_value 1
1712 
+};
1713 
+
1714 
+cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
1715 
+    user_value 1
1716 
+    inferred_value 1
1717 
+};
1718 
+
1719 
+cdl_option CYGBLD_ISO_FNMATCH_HEADER {
1720 
+    user_value 1
1721 
+    inferred_value 1
1722 
+};
1723 
+
1724 
+cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
1725 
+    inferred_value 1
1726 
+};
1727 
+
1728 
+cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
1729 
+    inferred_value 1
1730 
+};
1731 
+
1732 
+cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
1733 
+    inferred_value 1
1734 
+};
1735 
+
1736 
+cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
1737 
+    inferred_value 1
1738 
+};
1739 
+
1740 
+cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
1741 
+    inferred_value 1
1742 
+};
1743 
+
1744 
+cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
1745 
+    inferred_value 1
1746 
+};
1747 
+
1748 
+cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
1749 
+    inferred_value 1
1750 
+};
1751 
+
1752 
+cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
1753 
+    inferred_value 1
1754 
+};
1755 
+
1756 
+cdl_option CYGBLD_ISO_SETJMP_HEADER {
1757 
+    inferred_value 1
1758 
+};
1759 
+
1760 
+cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
1761 
+    inferred_value 1
1762 
+};
1763 
+
1764 
+cdl_option CYGBLD_ISO_DIRENT_HEADER {
1765 
+    inferred_value 1
1766 
+};
1767 
+
1768 
+cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
1769 
+    inferred_value 1
1770 
+};
1771 
+
1772 
+cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
1773 
+    inferred_value 1
1774 
+};
1775 
+
1776 
+cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
1777 
+    inferred_value 1
1778 
+};
1779 
+
1780 
+cdl_option CYGBLD_ISO_UTSNAME_HEADER {
1781 
+    inferred_value 1
1782 
+};
1783 
+
1784 
+cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
1785 
+    inferred_value 1
1786 
+};
1787 
+
1788 
+cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
1789 
+    inferred_value 1
1790 
+};
1791 
+
1792 
+cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
1793 
+    inferred_value 1
1794 
+};
1795 
+
1796 
+cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
1797 
+    inferred_value 1
1798 
+};
1799 
+
1800 
+cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
1801 
+    inferred_value 1
1802 
+};
1803 
+
1804 
+cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
1805 
+    inferred_value 1
1806 
+};
1807 
+
1808 
+cdl_option CYGBLD_ISO_DNS_HEADER {
1809 
+    inferred_value 1
1810 
+};
1811 
+
1812 
+cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
1813 
+    inferred_value 1
1814 
+};
1815 
+
1816 
+cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
1817 
+    inferred_value 1
1818 
+};
1819 
+
1820 
+cdl_option CYGIMP_KERNEL_SCHED_SORTED_QUEUES {
1821 
+    inferred_value 1
1822 
+};
1823 
+
1824 
+cdl_option CYGSEM_KERNEL_SCHED_TIMESLICE_ENABLE {
1825 
+    inferred_value 1
1826 
+};
1827 
+
1828 
+cdl_component CYGSEM_KERNEL_SCHED_ASR_SUPPORT {
1829 
+    inferred_value 1
1830 
+};
1831 
+
1832 
+cdl_option CYGSEM_KERNEL_SCHED_ASR_GLOBAL {
1833 
+    inferred_value 1
1834 
+};
1835 
+
1836 
+cdl_component CYGPKG_KERNEL_THREADS_DESTRUCTORS {
1837 
+    inferred_value 1
1838 
+};
1839 
+
1840 
+cdl_option CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT {
1841 
+    user_value 0
1842 
+};
1843 
+
1844 
+cdl_component CYGHWR_NET_DRIVER_ETH0_MANUAL {
1845 
+    user_value 0
1846 
+};
1847 
+
1848 
+cdl_component CYGHWR_NET_DRIVER_ETH0_BOOTP {
1849 
+    user_value 0
1850 
+};
1851 
+
1852 
+cdl_component CYGHWR_NET_DRIVER_ETH0_ADDRS {
1853 
+    user_value 1
1854 
+};
1855 
+
1856 
+
1857 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_RAM.ecm ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_RAM.ecm
1858 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_RAM.ecm      1969-12-31 16:00:00.000000000 -0800
1859 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_RAM.ecm        2009-12-04 15:45:07.000000000 -0800
1860 8 qaztronic 
@@ -0,0 +1,104 @@
1861 
+cdl_savefile_version 1;
1862 
+cdl_savefile_command cdl_savefile_version {};
1863 
+cdl_savefile_command cdl_savefile_command {};
1864 
+cdl_savefile_command cdl_configuration { description hardware template package };
1865 
+cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
1866 
+cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
1867 
+cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
1868 
+cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
1869 
+
1870 
+cdl_configuration eCos {
1871 
+    description "" ;
1872 
+    hardware    olpcl2294 ;
1873 
+    template    redboot ;
1874 
+    package -hardware CYGPKG_HAL_ARM v3_0 ;
1875 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX v3_0 ;
1876 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX_OLPCL2294 v3_0 ;
1877 
+    package -hardware CYGPKG_DEVS_FLASH_STRATA_V2 v3_0 ;
1878 
+    package -hardware CYGPKG_DEVS_FLASH_ARM_OLPCX2294_V2 v3_0 ;
1879 
+    package -hardware CYGPKG_DEVS_ETH_CL_CS8900A v3_0 ;
1880 
+    package -hardware CYGPKG_DEVS_ETH_ARM_OLPCL2294 v3_0 ;
1881 
+    package -hardware CYGPKG_IO_SERIAL_GENERIC_16X5X v3_0 ;
1882 
+    package -hardware CYGPKG_IO_SERIAL_ARM_LPC2XXX v3_0 ;
1883 
+    package -hardware CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX v3_0 ;
1884 
+    package -template CYGPKG_HAL v3_0 ;
1885 
+    package -template CYGPKG_INFRA v3_0 ;
1886 
+    package -template CYGPKG_REDBOOT v3_0 ;
1887 
+    package -template CYGPKG_ISOINFRA v3_0 ;
1888 
+    package -template CYGPKG_LIBC_STRING v3_0 ;
1889 
+    package -template CYGPKG_CRC v3_0 ;
1890 
+    package CYGPKG_IO_ETH_DRIVERS v3_0 ;
1891 
+    package CYGPKG_NS_DNS v3_0 ;
1892 
+    package CYGPKG_COMPRESS_ZLIB v3_0 ;
1893 
+    package CYGPKG_IO_FLASH v3_0 ;
1894 
+};
1895 
+
1896 
+cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
1897 
+    inferred_value 0
1898 
+};
1899 
+
1900 
+cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1901 
+    inferred_value 0
1902 
+};
1903 
+
1904 
+cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1905 
+    user_value 4096
1906 
+};
1907 
+
1908 
+cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1909 
+    user_value 0
1910 
+};
1911 
+
1912 
+cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1913 
+    inferred_value 0
1914 
+};
1915 
+
1916 
+cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1917 
+    inferred_value 1
1918 
+};
1919 
+
1920 
+cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
1921 
+    inferred_value 0 0
1922 
+};
1923 
+
1924 
+cdl_component CYGHWR_HAL_ARM_LPC2XXX {
1925 
+    inferred_value LPC2294
1926 
+};
1927 
+
1928 
+cdl_component CYGBLD_BUILD_REDBOOT {
1929 
+    user_value 1
1930 
+};
1931 
+
1932 
+cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
1933 
+    inferred_value 0
1934 
+};
1935 
+
1936 
+cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
1937 
+    inferred_value 1
1938 
+};
1939 
+
1940 
+cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
1941 
+    inferred_value 1
1942 
+};
1943 
+
1944 
+cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
1945 
+    inferred_value 1
1946 
+};
1947 
+
1948 
+cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
1949 
+    inferred_value 1
1950 
+};
1951 
+
1952 
+cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
1953 
+    inferred_value 1
1954 
+};
1955 
+
1956 
+cdl_option CYGBLD_ISO_DNS_HEADER {
1957 
+    inferred_value 1
1958 
+};
1959 
+
1960 
+cdl_option CYGPKG_NS_DNS_BUILD {
1961 
+    inferred_value 0
1962 
+};
1963 
+
1964 
+
1965 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_ROM.ecm ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_ROM.ecm
1966 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_ROM.ecm      1969-12-31 16:00:00.000000000 -0800
1967 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_ROM.ecm        2009-12-04 17:20:22.000000000 -0800
1968 8 qaztronic 
@@ -0,0 +1,112 @@
1969 
+cdl_savefile_version 1;
1970 
+cdl_savefile_command cdl_savefile_version {};
1971 
+cdl_savefile_command cdl_savefile_command {};
1972 
+cdl_savefile_command cdl_configuration { description hardware template package };
1973 
+cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
1974 
+cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
1975 
+cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
1976 
+cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
1977 
+
1978 
+cdl_configuration eCos {
1979 
+    description "" ;
1980 
+    hardware    de1_olpcl2294 ;
1981 
+    template    redboot ;
1982 
+    package -hardware CYGPKG_HAL_ARM v3_0 ;
1983 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX v3_0 ;
1984 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX_DE1_OLPCL2294 v3_0 ;
1985 
+    package -hardware CYGPKG_DEVS_FLASH_STRATA_V2 v3_0 ;
1986 
+    package -hardware CYGPKG_DEVS_FLASH_ARM_DE1_OLPCX2294_V2 v3_0 ;
1987 
+    package -hardware CYGPKG_DEVS_ETH_CL_CS8900A v3_0 ;
1988 
+    package -hardware CYGPKG_DEVS_ETH_ARM_OLPCL2294 v3_0 ;
1989 
+    package -hardware CYGPKG_IO_SERIAL_GENERIC_16X5X v3_0 ;
1990 
+    package -hardware CYGPKG_IO_SERIAL_ARM_LPC2XXX v3_0 ;
1991 
+    package -hardware CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX v3_0 ;
1992 
+    package -template CYGPKG_HAL v3_0 ;
1993 
+    package -template CYGPKG_INFRA v3_0 ;
1994 
+    package -template CYGPKG_REDBOOT v3_0 ;
1995 
+    package -template CYGPKG_ISOINFRA v3_0 ;
1996 
+    package -template CYGPKG_LIBC_STRING v3_0 ;
1997 
+    package -template CYGPKG_CRC v3_0 ;
1998 
+    package CYGPKG_IO_ETH_DRIVERS v3_0 ;
1999 
+    package CYGPKG_NS_DNS v3_0 ;
2000 
+    package CYGPKG_COMPRESS_ZLIB v3_0 ;
2001 
+    package CYGPKG_IO_FLASH v3_0 ;
2002 
+};
2003 
+
2004 
+cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
2005 
+    inferred_value 0
2006 
+};
2007 
+
2008 
+cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
2009 
+    inferred_value 0
2010 
+};
2011 
+
2012 
+cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
2013 
+    user_value 4096
2014 
+};
2015 
+
2016 
+cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
2017 
+    user_value 0
2018 
+};
2019 
+
2020 
+cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
2021 
+    inferred_value 0
2022 
+};
2023 
+
2024 
+cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
2025 
+    inferred_value 1
2026 
+};
2027 
+
2028 
+cdl_option CYGSEM_HAL_ROM_MONITOR {
2029 
+    inferred_value 1
2030 
+};
2031 
+
2032 
+cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2033 
+    inferred_value 0 0
2034 
+};
2035 
+
2036 
+cdl_component CYGHWR_HAL_ARM_LPC2XXX {
2037 
+    inferred_value LPC2294
2038 
+};
2039 
+
2040 
+cdl_component CYG_HAL_STARTUP {
2041 
+    inferred_value ROM
2042 
+};
2043 
+
2044 
+cdl_component CYGBLD_BUILD_REDBOOT {
2045 
+    user_value 1
2046 
+};
2047 
+
2048 
+cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
2049 
+    inferred_value 0
2050 
+};
2051 
+
2052 
+cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
2053 
+    inferred_value 1
2054 
+};
2055 
+
2056 
+cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
2057 
+    inferred_value 1
2058 
+};
2059 
+
2060 
+cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
2061 
+    inferred_value 1
2062 
+};
2063 
+
2064 
+cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
2065 
+    inferred_value 1
2066 
+};
2067 
+
2068 
+cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
2069 
+    inferred_value 1
2070 
+};
2071 
+
2072 
+cdl_option CYGBLD_ISO_DNS_HEADER {
2073 
+    inferred_value 1
2074 
+};
2075 
+
2076 
+cdl_option CYGPKG_NS_DNS_BUILD {
2077 
+    inferred_value 0
2078 
+};
2079 
+
2080 
+
2081 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_ROM_minimal.ecm ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_ROM_minimal.ecm
2082 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_ROM_minimal.ecm      1969-12-31 16:00:00.000000000 -0800
2083 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/misc/redboot_ROM_minimal.ecm        2009-12-04 15:45:07.000000000 -0800
2084 8 qaztronic 
@@ -0,0 +1,100 @@
2085 
+cdl_savefile_version 1;
2086 
+cdl_savefile_command cdl_savefile_version {};
2087 
+cdl_savefile_command cdl_savefile_command {};
2088 
+cdl_savefile_command cdl_configuration { description hardware template package };
2089 
+cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
2090 
+cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
2091 
+cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
2092 
+cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
2093 
+
2094 
+cdl_configuration eCos {
2095 
+    description "" ;
2096 
+    hardware    olpcl2294 ;
2097 
+    template    redboot ;
2098 
+    package -hardware CYGPKG_HAL_ARM v3_0 ;
2099 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX v3_0 ;
2100 
+    package -hardware CYGPKG_HAL_ARM_LPC2XXX_OLPCL2294 v3_0 ;
2101 
+    package -hardware CYGPKG_DEVS_FLASH_STRATA_V2 v3_0 ;
2102 
+    package -hardware CYGPKG_DEVS_FLASH_ARM_OLPCX2294_V2 v3_0 ;
2103 
+    package -hardware CYGPKG_DEVS_ETH_CL_CS8900A v3_0 ;
2104 
+    package -hardware CYGPKG_DEVS_ETH_ARM_OLPCL2294 v3_0 ;
2105 
+    package -hardware CYGPKG_IO_SERIAL_GENERIC_16X5X v3_0 ;
2106 
+    package -hardware CYGPKG_IO_SERIAL_ARM_LPC2XXX v3_0 ;
2107 
+    package -hardware CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX v3_0 ;
2108 
+    package -template CYGPKG_HAL v3_0 ;
2109 
+    package -template CYGPKG_INFRA v3_0 ;
2110 
+    package -template CYGPKG_REDBOOT v3_0 ;
2111 
+    package -template CYGPKG_ISOINFRA v3_0 ;
2112 
+    package -template CYGPKG_LIBC_STRING v3_0 ;
2113 
+    package -template CYGPKG_CRC v3_0 ;
2114 
+};
2115 
+
2116 
+cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
2117 
+    inferred_value 0
2118 
+};
2119 
+
2120 
+cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
2121 
+    inferred_value 0
2122 
+};
2123 
+
2124 
+cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
2125 
+    user_value 4096
2126 
+};
2127 
+
2128 
+cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
2129 
+    user_value 0
2130 
+};
2131 
+
2132 
+cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
2133 
+    inferred_value 0
2134 
+};
2135 
+
2136 
+cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
2137 
+    inferred_value 1
2138 
+};
2139 
+
2140 
+cdl_option CYGSEM_HAL_ROM_MONITOR {
2141 
+    inferred_value 1
2142 
+};
2143 
+
2144 
+cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2145 
+    inferred_value 0 0
2146 
+};
2147 
+
2148 
+cdl_component CYGHWR_HAL_ARM_LPC2XXX {
2149 
+    inferred_value LPC2294
2150 
+};
2151 
+
2152 
+cdl_component CYG_HAL_STARTUP {
2153 
+    inferred_value ROM
2154 
+};
2155 
+
2156 
+cdl_component CYGBLD_BUILD_REDBOOT {
2157 
+    user_value 1
2158 
+};
2159 
+
2160 
+cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
2161 
+    inferred_value 0
2162 
+};
2163 
+
2164 
+cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
2165 
+    inferred_value 1
2166 
+};
2167 
+
2168 
+cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
2169 
+    inferred_value 1
2170 
+};
2171 
+
2172 
+cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
2173 
+    inferred_value 1
2174 
+};
2175 
+
2176 
+cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
2177 
+    inferred_value 1
2178 
+};
2179 
+
2180 
+cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
2181 
+    inferred_value 1
2182 
+};
2183 
+
2184 
+
2185 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/src/de1_olpcl2294_misc.c ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/src/de1_olpcl2294_misc.c
2186 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/src/de1_olpcl2294_misc.c  1969-12-31 16:00:00.000000000 -0800
2187 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/src/de1_olpcl2294_misc.c    2009-12-04 15:45:07.000000000 -0800
2188 8 qaztronic 
@@ -0,0 +1,109 @@
2189 
+//==========================================================================
2190 
+//
2191 
+//      olpcl2294_misc.c
2192 
+//
2193 
+//      HAL misc board support code for Olimex LPC-L2294-1MB development
2194 
+//      board
2195 
+//
2196 
+//==========================================================================
2197 
+// ####ECOSGPLCOPYRIGHTBEGIN####
2198 
+// -------------------------------------------
2199 
+// This file is part of eCos, the Embedded Configurable Operating System.
2200 
+// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
2201 
+//
2202 
+// eCos is free software; you can redistribute it and/or modify it under
2203 
+// the terms of the GNU General Public License as published by the Free
2204 
+// Software Foundation; either version 2 or (at your option) any later
2205 
+// version.
2206 
+//
2207 
+// eCos is distributed in the hope that it will be useful, but WITHOUT
2208 
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
2209 
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
2210 
+// for more details.
2211 
+//
2212 
+// You should have received a copy of the GNU General Public License
2213 
+// along with eCos; if not, write to the Free Software Foundation, Inc.,
2214 
+// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
2215 
+//
2216 
+// As a special exception, if other files instantiate templates or use
2217 
+// macros or inline functions from this file, or you compile this file
2218 
+// and link it with other works to produce a work based on this file,
2219 
+// this file does not by itself cause the resulting work to be covered by
2220 
+// the GNU General Public License. However the source code for this file
2221 
+// must still be made available in accordance with section (3) of the GNU
2222 
+// General Public License v2.
2223 
+//
2224 
+// This exception does not invalidate any other reasons why a work based
2225 
+// on this file might be covered by the GNU General Public License.
2226 
+// -------------------------------------------
2227 
+// ####ECOSGPLCOPYRIGHTEND####
2228 
+//==========================================================================
2229 
+//#####DESCRIPTIONBEGIN####
2230 
+//
2231 
+// Author(s):     Sergei Gavrikov
2232 
+// Contributors:  Sergei Gavrikov
2233 
+// Date:          2008-08-31
2234 
+// Purpose:       HAL board support
2235 
+// Description:   Implementations of HAL board interfaces
2236 
+//
2237 
+//####DESCRIPTIONEND####
2238 
+//
2239 
+//========================================================================*/
2240 
+
2241 
+#include
2242 
+#include      // IO macros
2243 
+#include    // Register state info
2244 
+
2245 
+#include  // base types
2246 
+#include
2247 
+
2248 
+#include
2249 
+#include
2250 
+
2251 
+extern void cyg_hal_plf_serial_init (void);
2252 
+
2253 
+//--------------------------------------------------------------------------
2254 
+// hal_lpc2xxx_set_leds --
2255 
+//
2256 
+// There is one diagnostic LED marked 'STAT' on the board
2257 
+//
2258 
+void
2259 
+hal_lpc2xxx_set_leds (int mask)
2260 
+{
2261 
+    HAL_WRITE_UINT32 (CYGARC_HAL_LPC2XXX_REG_IO_BASE +
2262 
+                      CYGARC_HAL_LPC2XXX_REG_IO1SET, (1 << 23));
2263 
+    if (mask & 1)
2264 
+        HAL_WRITE_UINT32 (CYGARC_HAL_LPC2XXX_REG_IO_BASE +
2265 
+                          CYGARC_HAL_LPC2XXX_REG_IO1CLR, (1 << 23));
2266 
+}
2267 
+
2268 
+//--------------------------------------------------------------------------
2269 
+// cyg_hal_plf_comms_init  --
2270 
+//
2271 
+void
2272 
+cyg_hal_plf_comms_init (void)
2273 
+{
2274 
+    static int initialized = 0;
2275 
+
2276 
+    if (initialized)
2277 
+        return;
2278 
+    initialized = 1;
2279 
+
2280 
+    cyg_hal_plf_serial_init ();
2281 
+}
2282 
+
2283 
+#ifdef HAL_PLF_HARDWARE_INIT
2284 
+//--------------------------------------------------------------------------
2285 
+// hal_plf_hardware_init --
2286 
+//
2287 
+void
2288 
+hal_plf_hardware_init (void)
2289 
+{
2290 
+    // configure IRQ level from CL CS8900A
2291 
+    cyg_drv_interrupt_configure (CYGNUM_HAL_INTERRUPT_EINT2, 0, 1);
2292 
+}
2293 
+#endif // HAL_PLF_HARDWARE_INIT
2294 
+
2295 
+// indent: --indent-level4 -br -nut; vim: expandtab tabstop=4 shiftwidth=4
2296 
+//--------------------------------------------------------------------------
2297 
+// EOF olpcl2294_misc.c
2298 10 qaztronic 
diff -NaurbBw '--exclude-from=../diff_exclude.txt' /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/src/redboot_cmds.c ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/src/redboot_cmds.c
2299 8 qaztronic 
--- /opt/ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/src/redboot_cmds.c        1969-12-31 16:00:00.000000000 -0800
2300 10 qaztronic 
+++ ../ecos-3.0/packages/hal/arm/lpc2xxx/de1_olpcl2294/v3_0/src/redboot_cmds.c  2009-12-04 15:45:07.000000000 -0800
2301 8 qaztronic 
@@ -0,0 +1,115 @@
2302 
+//==========================================================================
2303 
+//
2304 
+//      redboot_cmds.c
2305 
+//
2306 
+//      OLPCL2294 [platform] specific RedBoot commands
2307 
+//
2308 
+//==========================================================================
2309 
+// ####ECOSGPLCOPYRIGHTBEGIN####
2310 
+// -------------------------------------------
2311 
+// This file is part of eCos, the Embedded Configurable Operating System.
2312 
+// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
2313 
+//
2314 
+// eCos is free software; you can redistribute it and/or modify it under
2315 
+// the terms of the GNU General Public License as published by the Free
2316 
+// Software Foundation; either version 2 or (at your option) any later
2317 
+// version.
2318 
+//
2319 
+// eCos is distributed in the hope that it will be useful, but WITHOUT
2320 
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
2321 
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
2322 
+// for more details.
2323 
+//
2324 
+// You should have received a copy of the GNU General Public License
2325 
+// along with eCos; if not, write to the Free Software Foundation, Inc.,
2326 
+// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
2327 
+//
2328 
+// As a special exception, if other files instantiate templates or use
2329 
+// macros or inline functions from this file, or you compile this file
2330 
+// and link it with other works to produce a work based on this file,
2331 
+// this file does not by itself cause the resulting work to be covered by
2332 
+// the GNU General Public License. However the source code for this file
2333 
+// must still be made available in accordance with section (3) of the GNU
2334 
+// General Public License v2.
2335 
+//
2336 
+// This exception does not invalidate any other reasons why a work based
2337 
+// on this file might be covered by the GNU General Public License.
2338 
+// -------------------------------------------
2339 
+// ####ECOSGPLCOPYRIGHTEND####
2340 
+//==========================================================================
2341 
+//#####DESCRIPTIONBEGIN####
2342 
+//
2343 
+// Author(s):     Sergei Gavrikov
2344 
+// Contributors:  Sergei Gavrikov
2345 
+// Date:          2008-08-31
2346 
+// Purpose:
2347 
+// Description:
2348 
+//
2349 
+// This code is part of RedBoot (tm).
2350 
+//
2351 
+//####DESCRIPTIONEND####
2352 
+//
2353 
+//========================================================================*/
2354 
+
2355 
+#include
2356 
+#include
2357 
+
2358 
+// CLI functions
2359 
+static void do_echo (int argc, char *argv[]);
2360 
+RedBoot_cmd ("echo",
2361 
+             "Outputs the args. If -n is specified, the trailing newline is suppressed.",
2362 
+             "-n [arg ...]", do_echo);
2363 
+
2364 
+static void do_led (int argc, char *argv[]);
2365 
+RedBoot_cmd ("led", "Manage diagnostic led(s)", "[-m mask]", do_led);
2366 
+
2367 
+//--------------------------------------------------------------------------
2368 
+// do_echo --
2369 
+//
2370 
+static void
2371 
+do_echo (int argc, char *argv[])
2372 
+{
2373 
+    bool newline = true;
2374 
+    if (argc > 1) {
2375 
+        int i = 1;
2376 
+        if (strncmp (&argv[i][0], "-n", 2) == 0) {
2377 
+            newline = false;
2378 
+            i++;
2379 
+        }
2380 
+        for (; i < argc; i++) {
2381 
+            diag_write_string (&argv[i][0]);
2382 
+            if ((argc - i) > 1)
2383 
+                diag_write_char (' ');
2384 
+        }
2385 
+    }
2386 
+    if (newline)
2387 
+        diag_write_char ('\n');
2388 
+    return;
2389 
+}
2390 
+
2391 
+//--------------------------------------------------------------------------
2392 
+// do_led --
2393 
+//
2394 
+static void
2395 
+do_led (int argc, char *argv[])
2396 
+{
2397 
+    struct option_info opts[1];
2398 
+    unsigned long mask;
2399 
+    bool mask_set;
2400 
+
2401 
+    init_opts (&opts[0], 'm', true, OPTION_ARG_TYPE_NUM,
2402 
+               &mask, &mask_set, "mask");
2403 
+    if (!scan_opts (argc, argv, 1, opts, 1, 0, 0, "")) {
2404 
+        return;
2405 
+    }
2406 
+    if (!mask_set) {
2407 
+        diag_printf ("led what ?\n");
2408 
+        return;
2409 
+    }
2410 
+    hal_lpc2xxx_set_leds (mask);
2411 
+    return;
2412 
+}
2413 
+
2414 
+// indent: --indent-level4 -br -nut; vim: expandtab tabstop=4 shiftwidth=4
2415 
+//--------------------------------------------------------------------------
2416 
+// EOF redboot_cmds.c

powered by: WebSVN 2.1.0

© copyright 1999-2026 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.