Subversion Repositories dma_ahb

//---------------------------------------------------------

//-- File generated by RobustVerilog parser

//-- Version: 1.0

//-- Invoked Fri Mar 25 23:32:59 2011

//--

//-- Source file: dma_reg.v

//---------------------------------------------------------

module dma_ahb64_reg(clk,reset,pclken,psel,penable,paddr,pwrite,pwdata,prdata,pslverr,core0_idle,ch_int_all_proc0,int_all_proc,core0_clkdiv,core0_ch_start,joint_mode0,rd_prio_top0,rd_prio_high0,rd_prio_top_num0,rd_prio_high_num0,wr_prio_top0,wr_prio_high0,wr_prio_top_num0,wr_prio_high_num0,periph_rx_req_reg,periph_tx_req_reg,periph_rx_clr,periph_tx_clr);

   input                       clk;

   input                   reset;

   input                   pclken;

   input                   psel;

   input                   penable;

   input [7:0]                   paddr;

   input                   pwrite;

   input [31:0]               pwdata;

   output [31:0]               prdata;

   output                   pslverr;

   input                   core0_idle;

   input [8*1-1:0]             ch_int_all_proc0;

   output [1-1:0]              int_all_proc;

   output [3:0]               core0_clkdiv;

   output [7:0]               core0_ch_start;

   output                   joint_mode0;

   output                   rd_prio_top0;

   output                   rd_prio_high0;

   output [2:0]               rd_prio_top_num0;

   output [2:0]               rd_prio_high_num0;

   output                   wr_prio_top0;

   output                   wr_prio_high0;

   output [2:0]               wr_prio_top_num0;

   output [2:0]               wr_prio_high_num0;

   output [31:1]               periph_rx_req_reg;

   output [31:1]               periph_tx_req_reg;

   input [31:1]               periph_rx_clr;

   input [31:1]               periph_tx_clr;

`include "dma_ahb64_reg_params.v"

   wire [31:0]                   user_def_stat;

   wire [31:0]                   user_def0_stat0;

   wire [31:0]                   user_def0_stat1;

   wire                   user_def_proj;

   wire [3:0]                   user_def_proc_num;

   wire                   user_def_dual_core;

   wire                   user_def_ic;

   wire                   user_def_ic_dual_port;

   wire                   user_def_clkgate;

   wire                   user_def_port0_mux;

   wire                   user_def_port1_mux;

   wire                               wr_joint0;

   wire                               wr_clkdiv0;

   wire                               wr_start0;

   wire                               wr_prio0;

   wire [7:0]                         proc0_int_stat0;

   wire [15:0]                        proc0_int_stat;

   wire                               proc0_int;

   wire [1-1:0]                int_all_proc_pre;

   reg [1-1:0]                 int_all_proc;

   wire                   wr_periph_rx;

   wire                   wr_periph_tx;

   reg [31:1]                   periph_rx_req_reg;

   reg [31:1]                   periph_tx_req_reg;

   wire [7:0]                   gpaddr;

   wire                   gpwrite;

   wire                   gpread;

   reg [31:0]                   prdata_pre;

   reg                       pslverr_pre;

   reg [31:0]                   prdata;

   reg                       pslverr;

   assign                              wr_joint0  = gpwrite & gpaddr == CORE0_JOINT;

   assign                              wr_clkdiv0 = gpwrite & gpaddr == CORE0_CLKDIV;

   assign                              wr_start0  = gpwrite & gpaddr == CORE0_START;

   assign                              wr_prio0   = gpwrite & gpaddr == CORE0_PRIO;

dma_ahb64_reg_core0 dma_ahb64_reg_core0(

                               .clk(clk),

                           .reset(reset),

                                   .wr_joint(wr_joint0),

                                   .wr_clkdiv(wr_clkdiv0),

                                   .wr_start(wr_start0),

                                   .wr_prio(wr_prio0),

                                   .pwdata(pwdata),

                                   .clkdiv(core0_clkdiv),

                                .ch_start(core0_ch_start),

                           .joint_mode(joint_mode0),

                           .rd_prio_top(rd_prio_top0),

                           .rd_prio_high(rd_prio_high0),

                                .rd_prio_top_num(rd_prio_top_num0),

                                .rd_prio_high_num(rd_prio_high_num0),

                           .wr_prio_top(wr_prio_top0),

                           .wr_prio_high(wr_prio_high0),

                                .wr_prio_top_num(wr_prio_top_num0),

                                .wr_prio_high_num(wr_prio_high_num0),

                                   .user_def_stat0(user_def0_stat0),

                                   .user_def_stat1(user_def0_stat1),

                                   .ch_int_all_proc(ch_int_all_proc0),

                                   .proc0_int_stat(proc0_int_stat0)

                                   );

   assign                   user_def_proj             = 1;

   assign                   user_def_proc_num         = 1;

   assign                   user_def_dual_core        = 0;

   assign                   user_def_ic               = 0;

   assign                   user_def_ic_dual_port     = 0;

   assign                   user_def_clkgate          = 0;

   assign                   user_def_port0_mux        = 0;

   assign                   user_def_port1_mux        = 0;

   assign                   user_def_stat =

                             {user_def_proj,              //[31]

                              {20{1'b0}},                 //[30:11]

                              user_def_port1_mux,         //[10]

                              user_def_port0_mux,         //[9]

                              user_def_clkgate,           //[8]

                               user_def_ic_dual_port,      //[7]

                               user_def_ic,                //[6]

                               user_def_dual_core,         //[5]

                               1'b0,                       //[4]

                               user_def_proc_num           //[3:0]

                              };

   assign                   gpaddr      = {8{psel}} & paddr;

   assign                   gpwrite     = psel & (~penable) & pwrite;

   assign                   gpread      = psel & (~penable) & (~pwrite);

   assign              wr_periph_rx = gpwrite & gpaddr == PERIPH_RX_CTRL;

   assign              wr_periph_tx = gpwrite & gpaddr == PERIPH_TX_CTRL;

   always @(posedge clk or posedge reset)

     if (reset)

       periph_rx_req_reg <= #1 {31{1'b0}};

     else if (wr_periph_rx | (|periph_rx_clr))

       periph_rx_req_reg <= #1 ({31{wr_periph_rx}} & pwdata[31:1]) & (~periph_rx_clr);

   always @(posedge clk or posedge reset)

     if (reset)

       periph_tx_req_reg <= #1 {31{1'b0}};

     else if (wr_periph_tx | (|periph_tx_clr))

       periph_tx_req_reg <= #1 ({31{wr_periph_tx}} & pwdata[31:1]) & (~periph_tx_clr);

   assign                   proc0_int_stat = {proc0_int_stat0};

   assign                             proc0_int = |proc0_int_stat;

   assign                             int_all_proc_pre = {proc0_int};

   always @(posedge clk or posedge reset)

     if (reset)

       int_all_proc <= #1 {1{1'b0}};

     else

       int_all_proc <= #1 int_all_proc_pre;

   always @(*)

     begin

    prdata_pre  = {32{1'b0}};

    case (gpaddr)

      PROC0_STATUS             : prdata_pre  = {{16{1'b0}}, proc0_int_stat0};

      CORE0_JOINT              : prdata_pre  = {{31{1'b0}}, joint_mode0};

      CORE0_PRIO               : prdata_pre  = {{16{1'b0}}, wr_prio_high0, wr_prio_high_num0, wr_prio_top0, wr_prio_top_num0, rd_prio_high0, rd_prio_high_num0, rd_prio_top0, rd_prio_top_num0};

      CORE0_CLKDIV             : prdata_pre  = {{28{1'b0}}, core0_clkdiv};

      CORE0_START              : prdata_pre  = {32{1'b0}};

      PERIPH_RX_CTRL            : prdata_pre  = {periph_rx_req_reg, 1'b0};

      PERIPH_TX_CTRL            : prdata_pre  = {periph_tx_req_reg, 1'b0};

      IDLE                      : prdata_pre  = {{30{1'b0}}, core0_idle};

      USER_DEF_STAT             : prdata_pre  = user_def_stat;

      USER_DEF0_STAT0          : prdata_pre  = user_def0_stat0;

      USER_DEF0_STAT1          : prdata_pre  = user_def0_stat1;

      default                   : prdata_pre  = {32{1'b0}};

    endcase

     end

   always @(/*AUTOSENSE*/gpaddr or gpread or gpwrite or psel)

     begin

    pslverr_pre = 1'b0;

    case (gpaddr)

      PROC0_STATUS             : pslverr_pre = gpwrite; //read only

      CORE0_JOINT              : pslverr_pre = 1'b0;    //read and write

      CORE0_PRIO               : pslverr_pre = 1'b0;    //read and write  

      CORE0_CLKDIV             : pslverr_pre = 1'b0;    //read and write

      CORE0_START              : pslverr_pre = gpread;  //write only

      PERIPH_RX_CTRL            : pslverr_pre = 1'b0;    //read and write  

      PERIPH_TX_CTRL            : pslverr_pre = 1'b0;    //read and write  

      IDLE                      : pslverr_pre = gpwrite; //read only

      USER_DEF_STAT             : pslverr_pre = gpwrite; //read only

      USER_DEF0_STAT0          : pslverr_pre = gpwrite; //read only

      USER_DEF0_STAT1          : pslverr_pre = gpwrite; //read only

      default                   : pslverr_pre = psel;    //decode error

    endcase

     end

   always @(posedge clk or posedge reset)

     if (reset)

       prdata <= #1 {32{1'b0}};

     else if (gpread & pclken)

       prdata <= #1 prdata_pre;

     else if (pclken) //zero to allow or in apb_mux

       prdata <= #1 {32{1'b0}};

   always @(posedge clk or posedge reset)

     if (reset)

       pslverr <= #1 1'b0;

     else if ((gpread | gpwrite) & pclken)

       pslverr <= #1 pslverr_pre;

     else if (pclken)

       pslverr <= #1 1'b0;

endmodule