URL https://opencores.org/ocsvn/eco32/eco32/trunk

Subversion Repositories eco32

[/] [eco32/] [trunk/] [stdalone/] [mkpart/] [mkmboot/] [stage1/] [mbr.s] - Blame information for rev 141

Go to most recent revision | Details | Compare with Previous | View Log


;
; mbr.s -- the master boot record
;
 
; Runtime environment:
;
; This code must be loaded and started at 0xC0010000.
; It allocates a stack from 0xC0011000 downwards. So
; it must run within 4K (code + data + stack).
;
; This code expects the disk number of the boot disk
; in $16, the start sector of the disk or partition
; to be booted in $17 and its size in $18.
;
; The boot manager, which is loaded by this code,
; must be in standalone (headerless) executable
; format, stored at absolute disk sectors 2..31,
; and gets loaded and started at 0xC0011000.
 
        .set    stacktop,0xC0011000     ; top of stack
        .set    loadaddr,0xC0011000     ; where to load the boot manager
 
        .set    cout,0xC0000018         ; the monitor's console output
        .set    dskio,0xC0000030        ; the monitor's disk I/O
 
        ; load the boot manager and start it
start:
        add     $29,$0,stacktop          ; setup stack
        add     $4,$0,strtmsg            ; say what is going on
        jal     msgout
        add     $4,$0,2                  ; start loading with sector 2
        add     $5,$0,loadaddr           ; where to load the boot manager
        and     $5,$5,0x3FFFFFFF        ; convert to physical address
        add     $6,$0,30         ; 30 sectors to load
        jal     rdsct
        add     $8,$0,loadaddr           ; start executing the boot manager
        jr      $8
 
        ; read disk sectors
        ;   $4 start sector number (disk or partition relative)
        ;   $5 transfer address
        ;   $6 number of sectors
rdsct:
        sub     $29,$29,32
        stw     $31,$29,20
        stw     $6,$29,16               ; sector count
        add     $7,$5,$0         ; transfer address
        add     $6,$4,$17               ; relative sector -> absolute
        add     $5,$0,'r'                ; command
        add     $4,$0,$16                ; disk number
        add     $8,$0,dskio
        jalr    $8
        bne     $2,$0,rderr              ; error?
        ldw     $31,$29,20
        add     $29,$29,32
        jr      $31
 
        ; disk read error
rderr:
        add     $4,$0,dremsg
        jal     msgout
        j       halt
 
        ; output message
        ;   $4 pointer to string
msgout:
        sub     $29,$29,8
        stw     $31,$29,4
        stw     $16,$29,0
        add     $16,$4,0         ; $16: pointer to string
msgout1:
        ldbu    $4,$16,0         ; get character
        beq     $4,$0,msgout2            ; done?
        jal     chrout                  ; output character
        add     $16,$16,1               ; bump pointer
        j       msgout1                 ; continue
msgout2:
        ldw     $16,$29,0
        ldw     $31,$29,4
        add     $29,$29,8
        jr      $31
 
        ; output character
        ;   $4 character
chrout:
        sub     $29,$29,4
        stw     $31,$29,0
        add     $8,$0,cout
        jalr    $8
        ldw     $31,$29,0
        add     $29,$29,4
        jr      $31
 
        ; halt execution by looping
halt:
        add     $4,$0,hltmsg
        jal     msgout
halt1:
        j       halt1
 
        ; messages
strtmsg:
        .byte   "MBR executing...", 0x0D, 0x0A, 0
dremsg:
        .byte   "disk read error", 0x0D, 0x0A, 0
hltmsg:
        .byte   "bootstrap halted", 0x0D, 0x0A, 0
 
        ; boot record signature
        .locate 512-2
        .byte   0x55, 0xAA

Line No.	Rev	Author	Line
1	18	hellwig	`;`
2			`; mbr.s -- the master boot record`
3			`;`
4
5			`; Runtime environment:`
6			`;`
7	107	hellwig	`; This code must be loaded and started at 0xC0010000.`
8			`; It allocates a stack from 0xC0011000 downwards. So`
9	18	hellwig	`; it must run within 4K (code + data + stack).`
10			`;`
11			`; This code expects the disk number of the boot disk`
12			`; in $16, the start sector of the disk or partition`
13			`; to be booted in $17 and its size in $18.`
14			`;`
15			`; The boot manager, which is loaded by this code,`
16			`; must be in standalone (headerless) executable`
17			`; format, stored at absolute disk sectors 2..31,`
18	107	hellwig	`; and gets loaded and started at 0xC0011000.`
19	18	hellwig
20	107	hellwig	`.set stacktop,0xC0011000 ; top of stack`
21			`.set loadaddr,0xC0011000 ; where to load the boot manager`
22	18	hellwig
23	107	hellwig	`.set cout,0xC0000018 ; the monitor's console output`
24			`.set dskio,0xC0000030 ; the monitor's disk I/O`
25	18	hellwig
26			`; load the boot manager and start it`
27			`start:`
28			`add $29,$0,stacktop ; setup stack`
29			`add $4,$0,strtmsg ; say what is going on`
30			`jal msgout`
31			`add $4,$0,2 ; start loading with sector 2`
32			`add $5,$0,loadaddr ; where to load the boot manager`
33			`and $5,$5,0x3FFFFFFF ; convert to physical address`
34			`add $6,$0,30 ; 30 sectors to load`
35			`jal rdsct`
36			`add $8,$0,loadaddr ; start executing the boot manager`
37			`jr $8`
38
39			`; read disk sectors`
40			`; $4 start sector number (disk or partition relative)`
41			`; $5 transfer address`
42			`; $6 number of sectors`
43			`rdsct:`
44			`sub $29,$29,32`
45			`stw $31,$29,20`
46			`stw $6,$29,16 ; sector count`
47			`add $7,$5,$0 ; transfer address`
48			`add $6,$4,$17 ; relative sector -> absolute`
49			`add $5,$0,'r' ; command`
50			`add $4,$0,$16 ; disk number`
51			`add $8,$0,dskio`
52			`jalr $8`
53			`bne $2,$0,rderr ; error?`
54			`ldw $31,$29,20`
55			`add $29,$29,32`
56			`jr $31`
57
58			`; disk read error`
59			`rderr:`
60			`add $4,$0,dremsg`
61			`jal msgout`
62			`j halt`
63
64			`; output message`
65			`; $4 pointer to string`
66			`msgout:`
67			`sub $29,$29,8`
68			`stw $31,$29,4`
69			`stw $16,$29,0`
70			`add $16,$4,0 ; $16: pointer to string`
71			`msgout1:`
72			`ldbu $4,$16,0 ; get character`
73			`beq $4,$0,msgout2 ; done?`
74			`jal chrout ; output character`
75			`add $16,$16,1 ; bump pointer`
76			`j msgout1 ; continue`
77			`msgout2:`
78			`ldw $16,$29,0`
79			`ldw $31,$29,4`
80			`add $29,$29,8`
81			`jr $31`
82
83			`; output character`
84			`; $4 character`
85			`chrout:`
86			`sub $29,$29,4`
87			`stw $31,$29,0`
88			`add $8,$0,cout`
89			`jalr $8`
90			`ldw $31,$29,0`
91			`add $29,$29,4`
92			`jr $31`
93
94			`; halt execution by looping`
95			`halt:`
96			`add $4,$0,hltmsg`
97			`jal msgout`
98			`halt1:`
99			`j halt1`
100
101			`; messages`
102			`strtmsg:`
103			`.byte "MBR executing...", 0x0D, 0x0A, 0`
104			`dremsg:`
105			`.byte "disk read error", 0x0D, 0x0A, 0`
106			`hltmsg:`
107			`.byte "bootstrap halted", 0x0D, 0x0A, 0`
108
109			`; boot record signature`
110			`.locate 512-2`
111			`.byte 0x55, 0xAA`

Browse

Tools

Subversion Repositories eco32

[/] [eco32/] [trunk/] [stdalone/] [mkpart/] [mkmboot/] [stage1/] [mbr.s] - Blame information for rev 141