OpenCores
URL https://opencores.org/ocsvn/eco32/eco32/trunk

Subversion Repositories eco32

[/] [eco32/] [trunk/] [tools/] [bin2exo/] [srecord.html] - Blame information for rev 166

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 39 hellwig 
<!DOCTYPE doctype PUBLIC "-//IETF//DTD HTML//EN">
2 
<html><head>
3 
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
4 
  <meta name="GENERATOR" content="Internet Assistant for Word 1.0Z">
5 
  <meta name="SUBJECT" content="EE/CS 373">
6 
  <meta name="AUTHOR" content="Val Tareski"><title>Motorola S-record description</title></head><body>
7 
<h1>
8 
  <a name="top">Motorola S-records</a>
9 
</h1>
10 
 
11 
The following fairly complete description of Motorola S-records was found
12 
a number of years ago on the man pages of a UNIX system.
13 
 
14 
<hr>
15 
 
16 
NAME
17 
<blockquote>
18 
  srec - S-record file and record format
19 
</blockquote>
20 
<p>
21 
DESCRIPTION
22 
</p><blockquote>
23 
  An S-record file consists of a sequence of specially formatted ASCII character
24 
  strings. An S-record will be less than or equal to 78 bytes in length.
25 
  <p>
26 
  The order of S-records within a file is of no significance and no particular
27 
  order may be assumed.
28 
  </p><p>
29 
  The general format of an S-record follows:
30 
</p></blockquote>
31 
<pre><tt>+-------------------//------------------//-----------------------+
32 
| type | count | address  |            data           | checksum |
33 
+-------------------//------------------//-----------------------+</tt>
34 
</pre>
35 
<blockquote>
36 
  type -- A char[2] field. These characters describe the type of record (S0,
37 
  S1, S2, S3, S5, S7, S8, or S9).
38 
  <p>
39 
  count -- A char[2] field. These characters when paired and interpreted as
40 
  a hexadecimal value, display the count of remaining character pairs in the
41 
  record.
42 
  </p><p>
43 
  address -- A char[4,6, or 8] field. These characters grouped and interpreted
44 
  as a hexadecimal value, display the address at which the data field is to
45 
  be loaded into memory. The length of the field depends on the number of bytes
46 
  necessary to hold the address. A 2-byte address uses 4 characters, a 3-byte
47 
  address uses 6 characters, and a 4-byte address uses 8 characters.
48 
  </p><p>
49 
  data -- A char [0-64] field. These characters when paired and interpreted
50 
  as hexadecimal values represent the memory loadable data or descriptive
51 
  information.
52 
  </p><p>
53 
  checksum -- A char[2] field. These characters when paired and interpreted
54 
  as a hexadecimal value display the least significant byte of the ones complement
55 
  of the sum of the byte values represented by the pairs of characters making
56 
  up the count, the address, and the data fields.
57 
  </p><p>
58 
  Each record is terminated with a line feed. If any additional or different
59 
  record terminator(s) or delay characters are needed during transmission to
60 
  the target system it is the responsibility of the transmitting program to
61 
  provide them.
62 
  </p><p>
63 
  S0 Record. The type of record is 'S0' (0x5330). The address field is unused
64 
  and will be filled with zeros (0x0000). The header information within the
65 
  data field is divided into the following subfields.
66 
  </p><p>
67 
</p><blockquote>
68 
<blockquote>
69 
  mname is char[20] and is the module name.<br>
70 
  ver is char[2] and is the version number.<br>
71 
  rev is char[2] and is the revision number.<br>
72 
  description is char[0-36] and is a text comment.
73 
  <p>
74 
</p></blockquote>
75 
  Each of the subfields is composed of ASCII bytes whose associated characters,
76 
  when paired, represent one byte hexadecimal values in the case of the version
77 
  and revision numbers, or represent the hexadecimal values of the ASCII characters
78 
  comprising the module name and description.
79 
</blockquote>
80 
<p>
81 
  S1 Record. The type of record field is 'S1' (0x5331). The address field is
82 
  intrepreted as a 2-byte address. The data field is composed of memory loadable
83 
  data.
84 
  </p><p>
85 
  S2 Record. The type of record field is 'S2' (0x5332). The address field is
86 
  intrepreted as a 3-byte address. The data field is composed of memory loadable
87 
  data.
88 
  </p><p>
89 
  S3 Record. The type of record field is 'S3' (0x5333). The address field is
90 
  intrepreted as a 4-byte address. The data field is composed of memory loadable
91 
  data.
92 
  </p><p>
93 
  S5 Record. The type of record field is 'S5' (0x5335). The address field is
94 
  intrepreted as a 2-byte value and contains the count of S1, S2, and S3 records
95 
  previously transmitted. There is no data field.
96 
  </p><p>
97 
  S7 Record. The type of record field is 'S7' (0x5337). The address field contains
98 
  the starting execution address and is intrepreted as 4-byte address. There
99 
  is no data field.
100 
  </p><p>
101 
  S8 Record. The type of record field is 'S8' (0x5338). The address field contains
102 
  the starting execution address and is intrepreted as 3-byte address. There
103 
  is no data field.
104 
  </p><p>
105 
  S9 Record. The type of record field is 'S9' (0x5339). The address field contains
106 
  the starting execution address and is intrepreted as 2-byte address. There
107 
  is no data field.
108 
</p></blockquote>
109 
<p>
110 
EXAMPLE
111 
</p><blockquote>
112 
  Shown below is a typical S-record format file.
113 
  <p>
114 
 
115 
</p><blockquote>
116 
  <tt>S00600004844521B<br>
117 
  S1130000285F245F2212226A000424290008237C2A<br>
118 
  S11300100002000800082629001853812341001813<br>
119 
  S113002041E900084E42234300182342000824A952<br>
120 
  S107003000144ED492<br>
121 
  S5030004F8<br>
122 
  S9030000FC</tt>
123 
</blockquote>
124 
  <p>
125 
  The file consists of one S0 record, four S1 records, one S5 record and an
126 
  S9 record.
127 
  </p><p>
128 
  The S0 record is comprised as follows:
129 
</p><ul>
130 
  <li>S0 S-record type S0, indicating it is a header record.
131 
  </li><li>06 Hexadecimal 06 (decimal 6), indicating that six character pairs (or ASCII
132 
  bytes) follow.
133 
  </li><li>00 00 Four character 2-byte address field, zeroes in this example.<br>
134 
  </li><li>48 44 52 ASCII H, D, and R - "HDR".
135 
  </li><li>1B The checksum.
136 
 
137 
</li></ul>
138 
  The first S1 record is comprised as follows:
139 
<ul>
140 
  <li>S1 S-record type S1, indicating it is a data record to be loaded at a 2-byte
141 
  address.
142 
  </li><li>13 Hexadecimal 13 (decimal 19), indicating that nineteen character pairs,
143 
  representing a 2 byte address, 16 bytes of binary data, and a 1 byte checksum,
144 
  follow.
145 
  </li><li>00 00 Four character 2-byte address field; hexidecimal address 0x0000, where
146 
  the data which follows is to be loaded.
147 
  </li><li>28 5F 24 5F 22 12 22 6A 00 04 24 29 00 08 23 7C Sixteen character pairs
148 
  representing the actual binary data.
149 
  </li><li>2A The checksum.
150 
</li></ul>
151 
  <p>
152 
  The second and third S1 records each contain 0x13 (19) character pairs and
153 
  are ended with checksums of 13 and 52, respectively. The fourth S1 record
154 
  contains 07 character pairs and has a checksum of 92.
155 
</p><p>
156 
  The S5 record is comprised as follows:
157 
</p><ul>
158 
  <li>S5 S-record type S5, indicating it is a count record indicating the number
159 
  of S1 records
160 
  </li><li>03 Hexadecimal 03 (decimal 3), indicating that three character pairs
161 
  follow.
162 
  </li><li>00 04 Hexadecimal 0004 (decimal 4), indicating that there are four data records
163 
  previous to this record.
164 
  </li><li>F8 The checksum.
165 
</li></ul>
166 
<p>
167 
  The S9 record is comprised as follows:
168 
</p><ul>
169 
  <li>S9 S-record type S9, indicating it is a termination record.
170 
  </li><li>03 Hexadecimal 03 (decimal 3), indicating that three character pairs
171 
  follow.
172 
  </li><li>00 00 The address field, hexadecimal 0 (decimal 0) indicating the starting
173 
  execution address.
174 
  </li><li>FC The checksum.
175 
</li></ul>
176 
</blockquote>
177 
<p>
178 
  </p><hr>
179 
<h2>
180 
  Instructor Notes
181 
</h2>
182 
<ul>
183 
  <li>
184 
    There isn't any evidence that Motorola ever has made use of the header
185 
    information within the data field of the S0 record, as described above. This
186 
    must have been used by some third party vendors.
187 
  </li><li>
188 
    This is the only place that a 78-byte limit on total record length or 64-byte
189 
    limit on data length is documented. These values shouldn't be trusted for
190 
    the general case.
191 
  </li><li>
192 
    The count field can have values in the range of 0x3 (2 bytes of address +
193 
    1 byte checksum = 3, a not very useful record) to 0xff; this is the count
194 
    of remaining character <big><b>pairs</b></big>, including checksum.
195 
  </li><li>
196 
    If you write code to convert S-Records, you should always assume that a record
197 
    can be as long as 514 (decimal) characters in length (255 * 2 = 510, plus
198 
    4 characters for the type and count fields), plus any terminating character(s).
199 
    That is, in establishing an input buffer in C, you would declare it to be
200 
    an array of 515 chars, thus leaving room for the terminating null character.
201 
</li></ul>
202 
<p>
203 
  </p><hr>
204 
<a href="#top">Beginning of document</a><br>
205 
</body></html>

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.