Subversion Repositories esoc

--------------------------------------------------------------------------------

--

-- This VHDL file was generated by EASE/HDL 7.4 Revision 4 from HDL Works B.V.

--

-- Ease library  : work

-- HDL library   : work

-- Host name     : S212065

-- User name     : df768

-- Time stamp    : Tue Aug 19 08:05:18 2014

--

-- Designed by   : L.Maarsen

-- Company       : LogiXA

-- Project info  : eSoC

--

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

-- Object        : Entity work.esoc_port_mal_inbound

-- Last modified : Mon Apr 14 12:49:11 2014.

--------------------------------------------------------------------------------

library ieee, std, work;

use ieee.std_logic_1164.all;

use std.textio.all;

use ieee.numeric_std.all;

use work.package_esoc_configuration.all;

entity esoc_port_mal_inbound is

  port(

    clk_control           : in     STD_LOGIC;

    ff_rx_a_empty         : in     STD_LOGIC;

    ff_rx_a_full          : in     STD_LOGIC;

    ff_rx_data            : in     STD_LOGIC_VECTOR(31 downto 0);

    ff_rx_dsav            : in     STD_LOGIC;

    ff_rx_dval            : in     STD_LOGIC;

    ff_rx_eop             : in     STD_LOGIC;

    ff_rx_mod             : in     STD_LOGIC_VECTOR(1 downto 0);

    ff_rx_rdy             : out    STD_LOGIC;

    ff_rx_sop             : in     STD_LOGIC;

    force_vlan_default_in : in     std_logic;

    inbound_data          : out    std_logic_vector(31 downto 0);

    inbound_data_full     : in     std_logic;

    inbound_data_write    : out    std_logic;

    inbound_header        : out    std_logic_vector(111 downto 0);

    inbound_header_write  : out    std_logic;

    inbound_info          : out    std_logic_vector(31 downto 0);

    inbound_info_write    : out    std_logic;

    port_vlan_default     : in     std_logic_vector(15 downto 0);

    reset                 : in     STD_LOGIC;

    rx_err_stat           : in     STD_LOGIC_VECTOR(17 downto 0);

    rx_frm_type           : in     STD_LOGIC_VECTOR(3 downto 0));

end entity esoc_port_mal_inbound;

--------------------------------------------------------------------------------

-- Object        : Architecture work.esoc_port_mal_inbound.esoc_port_mal_inbound

-- Last modified : Mon Apr 14 12:49:11 2014.

--------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------

-- architecture and declarations

---------------------------------------------------------------------------------------------------------------

architecture esoc_port_mal_inbound of esoc_port_mal_inbound is

---------------------------------------------------------------------------------------------------------------

-- registers

---------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------

-- signals

---------------------------------------------------------------------------------------------------------------

signal ff_rx_counter: integer range 2**esoc_inbound_info_length_size-1 downto 0;

signal boundary64: std_logic;

signal boundary64_write: std_logic;

begin

--=============================================================================================================

-- Process                : write header and information - DMAC, SMAC, VLAN ID, LENGTH, FLAGS  - into HEADER and INFO FIFO

-- Description  : header information is used by the search process in the esoc_port_processor

--                info information is used by the data process in the esoc_port_processor

--=============================================================================================================    

infoheader: process(clk_control, reset)

            begin

              if reset = '1' then

                inbound_header          <= (others => '0');

                inbound_info            <= (others => '0');

                inbound_data            <= (others => '0');

                inbound_header_write    <= '0';

                inbound_info_write      <= '0';

                inbound_data_write      <= '0';

                ff_rx_counter           <= 0;

                boundary64              <= '0';

                boundary64_write        <= '0';

              elsif clk_control'event and clk_control = '1' then

                -- clear one-clock active signals

                inbound_header_write  <= '0';

                inbound_info_write    <= '0';

                inbound_data_write    <= '0';

                boundary64_write      <= '0';

                -- define unused bits to avoid inferred latch warning during analysis & synthesis

                inbound_header(esoc_inbound_header_unused3_flag downto esoc_inbound_header_unused1_flag) <= (others => '0');

                inbound_info(esoc_inbound_info_unused3_flag downto esoc_inbound_info_unused1_flag) <= (others => '0');

                --

                -- MONITOR THE ST INTERFACE TO MAC

                --

                -- finalise packet storage, always write at 64b boundaries, because the other side of the FIFO has a width of 64 bit!

                -- create dummy write if the packet at completion does not end on a 64 bit boundary.  

                inbound_data_write <= boundary64_write;

                if ff_rx_dval = '1' then

                  -- store data in FIFO

                  if ff_rx_sop = '1' or ff_rx_counter > 0 then

                    inbound_data_write    <= '1';

                    inbound_data          <= ff_rx_data;

                    ff_rx_counter         <= ff_rx_counter + 4;

                    -- init boundary64 signal at start of new packet

                    if ff_rx_sop = '1' then

                      boundary64 <= '1';

                    else

                      boundary64 <= not(boundary64);

                    end if;

                  end if;

                  --

                  -- MANIPULATE DATA

                  --

                  case ff_rx_counter is

                    when 0  =>      -- store DMAC (4 MSbs) in data FIFO and prepare header FIFO input

                                    if ff_rx_sop = '1' then

                                      inbound_header(esoc_inbound_header_dmac_hi+31 downto esoc_inbound_header_dmac_hi) <= ff_rx_data;

                                    end if;

                    when 4  =>      -- store DMAC (2LSBs), SMAC (2MSBs) in data FIFO and prepare header FIFO input

                                    inbound_header(esoc_inbound_header_dmac_lo+15 downto esoc_inbound_header_smac_hi) <= ff_rx_data;

                    when 8  =>      -- store SMAC (4 LSBs) in data FIFO and prepare header FIFO input

                                    inbound_header(esoc_inbound_header_smac_lo+31 downto esoc_inbound_header_smac_lo) <= ff_rx_data;

                    when 12 =>      -- tagged packet? store VLAN ID/TCI in data FIFO and prepare header FIFO input

                                    if ff_rx_data(31 downto 16) = esoc_ethernet_vlan_type then

                                      -- tagged with VLAN ID 0 is a QoS Packet only - or force default VLAN ID - replace VLAN ID with port default VLAN ID

                                      if ff_rx_data(11 downto 0) = esoc_ethernet_vlan_qos or force_vlan_default_in = '1' then

                                        inbound_data(15 downto 0) <= port_vlan_default;

                                        -- store default port VLAN ID in the header FIFO for the search operation

                                        inbound_header(esoc_inbound_header_vlan+11 downto esoc_inbound_header_vlan) <= port_vlan_default(11 downto 0);

                                        inbound_header(esoc_inbound_header_vlan_flag) <= '1';

                                        -- store  default port VLAN tag in the info FIFO for the data transfer operation

                                        inbound_info(esoc_inbound_info_vlan_tci+15 downto esoc_inbound_info_vlan_tci) <= port_vlan_default;

                                        inbound_info(esoc_inbound_info_vlan_flag) <= '1';

                                      -- tagged with VLAN ID > 0

                                      else

                                        -- store only VLAN ID in the header FIFO for the search operation

                                        inbound_header(esoc_inbound_header_vlan+11 downto esoc_inbound_header_vlan) <= ff_rx_data(11 downto 0);

                                        inbound_header(esoc_inbound_header_vlan_flag) <= '1';

                                        -- store comlete VLAN tag in the info FIFO for the data transfer operation

                                        inbound_info(esoc_inbound_info_vlan_tci+15 downto esoc_inbound_info_vlan_tci) <= ff_rx_data(15 downto 0);

                                        inbound_info(esoc_inbound_info_vlan_flag) <= '1';

                                      end if;

                                    -- untagged packet

                                    else

                                      -- store default port VLAN ID in the header FIFO for the search operation

                                      inbound_header(esoc_inbound_header_vlan+11 downto esoc_inbound_header_vlan) <= port_vlan_default(11 downto 0);

                                      inbound_header(esoc_inbound_header_vlan_flag) <= '0';

                                      -- store  default port VLAN tag in the info FIFO for the data transfer operation

                                      inbound_info(esoc_inbound_info_vlan_tci+15 downto esoc_inbound_info_vlan_tci) <= port_vlan_default;

                                      inbound_info(esoc_inbound_info_vlan_flag) <= '0';

                                    end if;

                                    -- write header when complete, search operation can start!

                                    inbound_header_write <= '1';

                    when others =>  -- Write information in to fifo when packet is complete, data operation can start!

                                    if ff_rx_eop = '1' then

                                      ff_rx_counter    <= 0;

                                      inbound_info(esoc_inbound_info_length+esoc_inbound_info_length_size-1 downto esoc_inbound_info_length) <= std_logic_vector(to_unsigned(ff_rx_counter + 4 - to_integer(unsigned(ff_rx_mod)),esoc_inbound_info_length_size));

                                      inbound_info_write <= '1';

                                      boundary64_write <= not(boundary64);

                                    end if;

                  end case;

                end if;

              end if;

            end process;

--=============================================================================================================

-- Process                : write packet into DATA FIFO

-- Description  : 

--=============================================================================================================                

            -- FULL signal of FIFO is used to drive READY of ST Sink interface

            ff_rx_rdy <= not(inbound_data_full);

end architecture esoc_port_mal_inbound ; -- of esoc_port_mal_inbound