Subversion Repositories ethmac

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  File name: eth_phy_defines.v                                ////

////                                                              ////

////  This file is part of the Ethernet IP core project           ////

////  http://www.opencores.org/project,ethmac                     ////

////                                                              ////

////  Author(s):                                                  ////

////      - Tadej Markovic, tadej@opencores.org                   ////

////                                                              ////

////  All additional information is available in the README.txt   ////

////  file.                                                       ////

////                                                              ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2002,  Authors                                 ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.1  2002/09/13 11:57:20  mohor

// New testbench. Thanks to Tadej M - "The Spammer".

//

//

//

// Address of PHY device (LXT971A)

`define ETH_PHY_ADDR                 5'h01

// LED/Configuration pins on PHY device - see the specification, page 26, table 8

// Initial set of bits 13, 12 and 8 of Control Register

`define LED_CFG1                     1'b0

`define LED_CFG2                     1'b0

`define LED_CFG3                     1'b1

// Supported speeds and physical ports - see the specification, page 67, table 41

// Set bits 15 to 9 of Status Register

`define SUPPORTED_SPEED_AND_PORT     7'h3F

// Extended status register (address 15)

// Set bit 8 of Status Register

`define EXTENDED_STATUS              1'b0

// Default status bits - see the specification, page 67, table 41

// Set bits 6 to 0 of Status Register

`define DEFAULT_STATUS               7'h09

// PHY ID 1 number - see the specification, page 68, table 42

// Set bits of Phy Id Register 1

`define PHY_ID1                      16'h0013

// PHY ID 2 number - see the specification, page 68, table 43

// Set bits 15 to 10 of Phy Id Register 2

`define PHY_ID2                      6'h1E

// Manufacturer MODEL number - see the specification, page 68, table 43

// Set bits 9 to 4 of Phy Id Register 2

`define MAN_MODEL_NUM                6'h0E

// Manufacturer REVISION number - see the specification, page 68, table 43

// Set bits 3 to 0 of Phy Id Register 2

`define MAN_REVISION_NUM             4'h2