Subversion Repositories ethmac

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  eth_fifo.v                                                  ////

////                                                              ////

////  This file is part of the Ethernet IP core project           ////

////  http://www.opencores.org/project,ethmac                     ////

////                                                              ////

////  Author(s):                                                  ////

////      - Igor Mohor (igorM@opencores.org)                      ////

////                                                              ////

////  All additional information is avaliable in the Readme.txt   ////

////  file.                                                       ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2001 Authors                                   ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.3  2002/04/22 13:45:52  mohor

// Generic ram or Xilinx ram can be used in fifo (selectable by setting

// ETH_FIFO_XILINX in eth_defines.v).

//

// Revision 1.2  2002/03/25 13:33:04  mohor

// When clear and read/write are active at the same time, cnt and pointers are

// set to 1.

//

// Revision 1.1  2002/02/05 16:44:39  mohor

// Both rx and tx part are finished. Tested with wb_clk_i between 10 and 200

// MHz. Statuses, overrun, control frame transmission and reception still  need

// to be fixed.

//

//

`include "ethmac_defines.v"

`include "timescale.v"

module eth_fifo (data_in, data_out, clk, reset, write, read, clear,

                 almost_full, full, almost_empty, empty, cnt);

parameter DATA_WIDTH    = 32;

parameter DEPTH         = 8;

parameter CNT_WIDTH     = 4;

input                     clk;

input                     reset;

input                     write;

input                     read;

input                     clear;

input   [DATA_WIDTH-1:0]  data_in;

output  [DATA_WIDTH-1:0]  data_out;

output                    almost_full;

output                    full;

output                    almost_empty;

output                    empty;

output  [CNT_WIDTH-1:0]   cnt;

`ifdef ETH_FIFO_XILINX

`else

  `ifdef ETH_ALTERA_ALTSYNCRAM

  `else

    reg     [DATA_WIDTH-1:0]  fifo  [0:DEPTH-1];

    reg     [DATA_WIDTH-1:0]  data_out;

  `endif

`endif

reg     [CNT_WIDTH-1:0]   cnt;

reg     [CNT_WIDTH-2:0]   read_pointer;

reg     [CNT_WIDTH-2:0]   write_pointer;

always @ (posedge clk or posedge reset)

begin

  if(reset)

    cnt <= 0;

  else

  if(clear)

    cnt <= { {(CNT_WIDTH-1){1'b0}}, read^write};

  else

  if(read ^ write)

    if(read)

      cnt <= cnt - 1;

    else

      cnt <= cnt + 1;

end

always @ (posedge clk or posedge reset)

begin

  if(reset)

    read_pointer <= 0;

  else

  if(clear)

    read_pointer <= { {(CNT_WIDTH-2){1'b0}}, read};

  else

  if(read & ~empty)

    read_pointer <= read_pointer + 1'b1;

end

always @ (posedge clk or posedge reset)

begin

  if(reset)

    write_pointer <= 0;

  else

  if(clear)

    write_pointer <= { {(CNT_WIDTH-2){1'b0}}, write};

  else

  if(write & ~full)

    write_pointer <= write_pointer + 1'b1;

end

assign empty = ~(|cnt);

assign almost_empty = cnt == 1;

assign full  = cnt == DEPTH;

assign almost_full  = &cnt[CNT_WIDTH-2:0];

`ifdef ETH_FIFO_XILINX

  xilinx_dist_ram_16x32 fifo

  ( .data_out(data_out),

    .we(write & ~full),

    .data_in(data_in),

    .read_address( clear ? {CNT_WIDTH-1{1'b0}} : read_pointer),

    .write_address(clear ? {CNT_WIDTH-1{1'b0}} : write_pointer),

    .wclk(clk)

  );

`else   // !ETH_FIFO_XILINX

`ifdef ETH_ALTERA_ALTSYNCRAM

  altera_dpram_16x32    altera_dpram_16x32_inst

  (

        .data             (data_in),

        .wren             (write & ~full),

        .wraddress        (clear ? {CNT_WIDTH-1{1'b0}} : write_pointer),

        .rdaddress        (clear ? {CNT_WIDTH-1{1'b0}} : read_pointer ),

        .clock            (clk),

        .q                (data_out)

  );  //exemplar attribute altera_dpram_16x32_inst NOOPT TRUE

`else   // !ETH_ALTERA_ALTSYNCRAM

  always @ (posedge clk)

  begin

    if(write & clear)

      fifo[0] <= data_in;

    else

   if(write & ~full)

      fifo[write_pointer] <= data_in;

  end

  always @ (posedge clk)

  begin

    if(clear)

      data_out <= fifo[0];

    else

      data_out <= fifo[read_pointer];

  end

`endif  // !ETH_ALTERA_ALTSYNCRAM

`endif  // !ETH_FIFO_XILINX

endmodule