Subversion Repositories ethmac

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  eth_registers.v                                             ////

////                                                              ////

////  This file is part of the Ethernet IP core project           ////

////  http://www.opencores.org/project,ethmac                     ////

////                                                              ////

////  Author(s):                                                  ////

////      - Igor Mohor (igorM@opencores.org)                      ////

////                                                              ////

////  All additional information is avaliable in the Readme.txt   ////

////  file.                                                       ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2001, 2002 Authors                             ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.28  2004/04/26 15:26:23  igorm

// - Bug connected to the TX_BD_NUM_Wr signal fixed (bug came in with the

//   previous update of the core.

// - TxBDAddress is set to 0 after the TX is enabled in the MODER register.

// - RxBDAddress is set to r_TxBDNum<<1 after the RX is enabled in the MODER

//   register. (thanks to Mathias and Torbjorn)

// - Multicast reception was fixed. Thanks to Ulrich Gries

//

// Revision 1.27  2004/04/26 11:42:17  igorm

// TX_BD_NUM_Wr error fixed. Error was entered with the last check-in.

//

// Revision 1.26  2003/11/12 18:24:59  tadejm

// WISHBONE slave changed and tested from only 32-bit accesss to byte access.

//

// Revision 1.25  2003/04/18 16:26:25  mohor

// RxBDAddress was updated also when value to r_TxBDNum was written with

// greater value than allowed.

//

// Revision 1.24  2002/11/22 01:57:06  mohor

// Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort

// synchronized.

//

// Revision 1.23  2002/11/19 18:13:49  mohor

// r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead.

//

// Revision 1.22  2002/11/14 18:37:20  mohor

// r_Rst signal does not reset any module any more and is removed from the design.

//

// Revision 1.21  2002/09/10 10:35:23  mohor

// Ethernet debug registers removed.

//

// Revision 1.20  2002/09/04 18:40:25  mohor

// ETH_TXCTRL and ETH_RXCTRL registers added. Interrupts related to

// the control frames connected.

//

// Revision 1.19  2002/08/19 16:01:40  mohor

// Only values smaller or equal to 0x80 can be written to TX_BD_NUM register.

// r_TxEn and r_RxEn depend on the limit values of the TX_BD_NUMOut.

//

// Revision 1.18  2002/08/16 22:28:23  mohor

// Syntax error fixed.

//

// Revision 1.17  2002/08/16 22:23:03  mohor

// Syntax error fixed.

//

// Revision 1.16  2002/08/16 22:14:22  mohor

// Synchronous reset added to all registers. Defines used for width. r_MiiMRst

// changed from bit position 10 to 9.

//

// Revision 1.15  2002/08/14 18:26:37  mohor

// LinkFailRegister is reflecting the status of the PHY's link fail status bit.

//

// Revision 1.14  2002/04/22 14:03:44  mohor

// Interrupts are visible in the ETH_INT_SOURCE regardless if they are enabled

// or not.

//

// Revision 1.13  2002/02/26 16:18:09  mohor

// Reset values are passed to registers through parameters

//

// Revision 1.12  2002/02/17 13:23:42  mohor

// Define missmatch fixed.

//

// Revision 1.11  2002/02/16 14:03:44  mohor

// Registered trimmed. Unused registers removed.

//

// Revision 1.10  2002/02/15 11:08:25  mohor

// File format fixed a bit.

//

// Revision 1.9  2002/02/14 20:19:41  billditt

// Modified for Address Checking,

// addition of eth_addrcheck.v

//

// Revision 1.8  2002/02/12 17:01:19  mohor

// HASH0 and HASH1 registers added. 

// Revision 1.7  2002/01/23 10:28:16  mohor

// Link in the header changed.

//

// Revision 1.6  2001/12/05 15:00:16  mohor

// RX_BD_NUM changed to TX_BD_NUM (holds number of TX descriptors

// instead of the number of RX descriptors).

//

// Revision 1.5  2001/12/05 10:22:19  mohor

// ETH_RX_BD_ADR register deleted. ETH_RX_BD_NUM is used instead.

//

// Revision 1.4  2001/10/19 08:43:51  mohor

// eth_timescale.v changed to timescale.v This is done because of the

// simulation of the few cores in a one joined project.

//

// Revision 1.3  2001/10/18 12:07:11  mohor

// Status signals changed, Adress decoding changed, interrupt controller

// added.

//

// Revision 1.2  2001/09/24 15:02:56  mohor

// Defines changed (All precede with ETH_). Small changes because some

// tools generate warnings when two operands are together. Synchronization

// between two clocks domains in eth_wishbonedma.v is changed (due to ASIC

// demands).

//

// Revision 1.1  2001/08/06 14:44:29  mohor

// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).

// Include files fixed to contain no path.

// File names and module names changed ta have a eth_ prologue in the name.

// File eth_timescale.v is used to define timescale

// All pin names on the top module are changed to contain _I, _O or _OE at the end.

// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O

// and Mdo_OE. The bidirectional signal must be created on the top level. This

// is done due to the ASIC tools.

//

// Revision 1.2  2001/08/02 09:25:31  mohor

// Unconnected signals are now connected.

//

// Revision 1.1  2001/07/30 21:23:42  mohor

// Directory structure changed. Files checked and joind together.

//

//

//

//

//

//

`include "ethmac_defines.v"

`include "timescale.v"

module eth_registers( DataIn, Address, Rw, Cs, Clk, Reset, DataOut,

                      r_RecSmall, r_Pad, r_HugEn, r_CrcEn, r_DlyCrcEn,

                      r_FullD, r_ExDfrEn, r_NoBckof, r_LoopBck, r_IFG,

                      r_Pro, r_Iam, r_Bro, r_NoPre, r_TxEn, r_RxEn,

                      TxB_IRQ, TxE_IRQ, RxB_IRQ, RxE_IRQ, Busy_IRQ,

                      r_IPGT, r_IPGR1, r_IPGR2, r_MinFL, r_MaxFL, r_MaxRet,

                      r_CollValid, r_TxFlow, r_RxFlow, r_PassAll,

                      r_MiiNoPre, r_ClkDiv, r_WCtrlData, r_RStat, r_ScanStat,

                      r_RGAD, r_FIAD, r_CtrlData, NValid_stat, Busy_stat,

                      LinkFail, r_MAC, WCtrlDataStart, RStatStart,

                      UpdateMIIRX_DATAReg, Prsd, r_TxBDNum, int_o,

                      r_HASH0, r_HASH1, r_TxPauseTV, r_TxPauseRq, RstTxPauseRq, TxCtrlEndFrm,

                      dbg_dat,

                      StartTxDone, TxClk, RxClk, SetPauseTimer

                    );

input [31:0] DataIn;

input [7:0] Address;

input Rw;

input [3:0] Cs;

input Clk;

input Reset;

input WCtrlDataStart;

input RStatStart;

input UpdateMIIRX_DATAReg;

input [15:0] Prsd;

output [31:0] DataOut;

reg    [31:0] DataOut;

output r_RecSmall;

output r_Pad;

output r_HugEn;

output r_CrcEn;

output r_DlyCrcEn;

output r_FullD;

output r_ExDfrEn;

output r_NoBckof;

output r_LoopBck;

output r_IFG;

output r_Pro;

output r_Iam;

output r_Bro;

output r_NoPre;

output r_TxEn;

output r_RxEn;

output [31:0] r_HASH0;

output [31:0] r_HASH1;

input TxB_IRQ;

input TxE_IRQ;

input RxB_IRQ;

input RxE_IRQ;

input Busy_IRQ;

output [6:0] r_IPGT;

output [6:0] r_IPGR1;

output [6:0] r_IPGR2;

output [15:0] r_MinFL;

output [15:0] r_MaxFL;

output [3:0] r_MaxRet;

output [5:0] r_CollValid;

output r_TxFlow;

output r_RxFlow;

output r_PassAll;

output r_MiiNoPre;

output [7:0] r_ClkDiv;

output r_WCtrlData;

output r_RStat;

output r_ScanStat;

output [4:0] r_RGAD;

output [4:0] r_FIAD;

output [15:0]r_CtrlData;

input NValid_stat;

input Busy_stat;

input LinkFail;

output [47:0]r_MAC;

output [7:0] r_TxBDNum;

output       int_o;

output [15:0]r_TxPauseTV;

output       r_TxPauseRq;

input        RstTxPauseRq;

input        TxCtrlEndFrm;

input        StartTxDone;

input        TxClk;

input        RxClk;

input        SetPauseTimer;

input [31:0] dbg_dat; // debug data input

reg          irq_txb;

reg          irq_txe;

reg          irq_rxb;

reg          irq_rxe;

reg          irq_busy;

reg          irq_txc;

reg          irq_rxc;

reg SetTxCIrq_txclk;

reg SetTxCIrq_sync1, SetTxCIrq_sync2, SetTxCIrq_sync3;

reg SetTxCIrq;

reg ResetTxCIrq_sync1, ResetTxCIrq_sync2;

reg SetRxCIrq_rxclk;

reg SetRxCIrq_sync1, SetRxCIrq_sync2, SetRxCIrq_sync3;

reg SetRxCIrq;

reg ResetRxCIrq_sync1;

reg ResetRxCIrq_sync2;

reg ResetRxCIrq_sync3;

wire [3:0] Write =   Cs  & {4{Rw}};

wire       Read  = (|Cs) &   ~Rw;

wire MODER_Sel      = (Address == `ETH_MODER_ADR       );

wire INT_SOURCE_Sel = (Address == `ETH_INT_SOURCE_ADR  );

wire INT_MASK_Sel   = (Address == `ETH_INT_MASK_ADR    );

wire IPGT_Sel       = (Address == `ETH_IPGT_ADR        );

wire IPGR1_Sel      = (Address == `ETH_IPGR1_ADR       );

wire IPGR2_Sel      = (Address == `ETH_IPGR2_ADR       );

wire PACKETLEN_Sel  = (Address == `ETH_PACKETLEN_ADR   );

wire COLLCONF_Sel   = (Address == `ETH_COLLCONF_ADR    );

wire CTRLMODER_Sel  = (Address == `ETH_CTRLMODER_ADR   );

wire MIIMODER_Sel   = (Address == `ETH_MIIMODER_ADR    );

wire MIICOMMAND_Sel = (Address == `ETH_MIICOMMAND_ADR  );

wire MIIADDRESS_Sel = (Address == `ETH_MIIADDRESS_ADR  );

wire MIITX_DATA_Sel = (Address == `ETH_MIITX_DATA_ADR  );

wire MAC_ADDR0_Sel  = (Address == `ETH_MAC_ADDR0_ADR   );

wire MAC_ADDR1_Sel  = (Address == `ETH_MAC_ADDR1_ADR   );

wire HASH0_Sel      = (Address == `ETH_HASH0_ADR       );

wire HASH1_Sel      = (Address == `ETH_HASH1_ADR       );

wire TXCTRL_Sel     = (Address == `ETH_TX_CTRL_ADR     );

wire RXCTRL_Sel     = (Address == `ETH_RX_CTRL_ADR     );

wire DBG_REG_Sel    = (Address == `ETH_DBG_ADR         );

wire TX_BD_NUM_Sel  = (Address == `ETH_TX_BD_NUM_ADR   );

wire [2:0] MODER_Wr;

wire [0:0] INT_SOURCE_Wr;

wire [0:0] INT_MASK_Wr;

wire [0:0] IPGT_Wr;

wire [0:0] IPGR1_Wr;

wire [0:0] IPGR2_Wr;

wire [3:0] PACKETLEN_Wr;

wire [2:0] COLLCONF_Wr;

wire [0:0] CTRLMODER_Wr;

wire [1:0] MIIMODER_Wr;

wire [0:0] MIICOMMAND_Wr;

wire [1:0] MIIADDRESS_Wr;

wire [1:0] MIITX_DATA_Wr;

wire       MIIRX_DATA_Wr;

wire [3:0] MAC_ADDR0_Wr;

wire [1:0] MAC_ADDR1_Wr;

wire [3:0] HASH0_Wr;

wire [3:0] HASH1_Wr;

wire [2:0] TXCTRL_Wr;

wire [0:0] TX_BD_NUM_Wr;

assign MODER_Wr[0]       = Write[0]  & MODER_Sel;

assign MODER_Wr[1]       = Write[1]  & MODER_Sel;

assign MODER_Wr[2]       = Write[2]  & MODER_Sel;

assign INT_SOURCE_Wr[0]  = Write[0]  & INT_SOURCE_Sel;

assign INT_MASK_Wr[0]    = Write[0]  & INT_MASK_Sel;

assign IPGT_Wr[0]        = Write[0]  & IPGT_Sel;

assign IPGR1_Wr[0]       = Write[0]  & IPGR1_Sel;

assign IPGR2_Wr[0]       = Write[0]  & IPGR2_Sel;

assign PACKETLEN_Wr[0]   = Write[0]  & PACKETLEN_Sel;

assign PACKETLEN_Wr[1]   = Write[1]  & PACKETLEN_Sel;

assign PACKETLEN_Wr[2]   = Write[2]  & PACKETLEN_Sel;

assign PACKETLEN_Wr[3]   = Write[3]  & PACKETLEN_Sel;

assign COLLCONF_Wr[0]    = Write[0]  & COLLCONF_Sel;

assign COLLCONF_Wr[1]    = 1'b0;  // Not used

assign COLLCONF_Wr[2]    = Write[2]  & COLLCONF_Sel;

assign CTRLMODER_Wr[0]   = Write[0]  & CTRLMODER_Sel;

assign MIIMODER_Wr[0]    = Write[0]  & MIIMODER_Sel;

assign MIIMODER_Wr[1]    = Write[1]  & MIIMODER_Sel;

assign MIICOMMAND_Wr[0]  = Write[0]  & MIICOMMAND_Sel;

assign MIIADDRESS_Wr[0]  = Write[0]  & MIIADDRESS_Sel;

assign MIIADDRESS_Wr[1]  = Write[1]  & MIIADDRESS_Sel;

assign MIITX_DATA_Wr[0]  = Write[0]  & MIITX_DATA_Sel;

assign MIITX_DATA_Wr[1]  = Write[1]  & MIITX_DATA_Sel;

assign MIIRX_DATA_Wr     = UpdateMIIRX_DATAReg;

assign MAC_ADDR0_Wr[0]   = Write[0]  & MAC_ADDR0_Sel;

assign MAC_ADDR0_Wr[1]   = Write[1]  & MAC_ADDR0_Sel;

assign MAC_ADDR0_Wr[2]   = Write[2]  & MAC_ADDR0_Sel;

assign MAC_ADDR0_Wr[3]   = Write[3]  & MAC_ADDR0_Sel;

assign MAC_ADDR1_Wr[0]   = Write[0]  & MAC_ADDR1_Sel;

assign MAC_ADDR1_Wr[1]   = Write[1]  & MAC_ADDR1_Sel;

assign HASH0_Wr[0]       = Write[0]  & HASH0_Sel;

assign HASH0_Wr[1]       = Write[1]  & HASH0_Sel;

assign HASH0_Wr[2]       = Write[2]  & HASH0_Sel;

assign HASH0_Wr[3]       = Write[3]  & HASH0_Sel;

assign HASH1_Wr[0]       = Write[0]  & HASH1_Sel;

assign HASH1_Wr[1]       = Write[1]  & HASH1_Sel;

assign HASH1_Wr[2]       = Write[2]  & HASH1_Sel;

assign HASH1_Wr[3]       = Write[3]  & HASH1_Sel;

assign TXCTRL_Wr[0]      = Write[0]  & TXCTRL_Sel;

assign TXCTRL_Wr[1]      = Write[1]  & TXCTRL_Sel;

assign TXCTRL_Wr[2]      = Write[2]  & TXCTRL_Sel;

assign TX_BD_NUM_Wr[0]   = Write[0]  & TX_BD_NUM_Sel & (DataIn<='h80);

wire [31:0] MODEROut;

wire [31:0] INT_SOURCEOut;

wire [31:0] INT_MASKOut;

wire [31:0] IPGTOut;

wire [31:0] IPGR1Out;

wire [31:0] IPGR2Out;

wire [31:0] PACKETLENOut;

wire [31:0] COLLCONFOut;

wire [31:0] CTRLMODEROut;

wire [31:0] MIIMODEROut;

wire [31:0] MIICOMMANDOut;

wire [31:0] MIIADDRESSOut;

wire [31:0] MIITX_DATAOut;

wire [31:0] MIIRX_DATAOut;

wire [31:0] MIISTATUSOut;

wire [31:0] MAC_ADDR0Out;

wire [31:0] MAC_ADDR1Out;

wire [31:0] TX_BD_NUMOut;

wire [31:0] HASH0Out;

wire [31:0] HASH1Out;

wire [31:0] TXCTRLOut;

wire [31:0] DBGOut;

// MODER Register

eth_register #(`ETH_MODER_WIDTH_0, `ETH_MODER_DEF_0)        MODER_0

  (

   .DataIn    (DataIn[`ETH_MODER_WIDTH_0 - 1:0]),

   .DataOut   (MODEROut[`ETH_MODER_WIDTH_0 - 1:0]),

   .Write     (MODER_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

eth_register #(`ETH_MODER_WIDTH_1, `ETH_MODER_DEF_1)        MODER_1

  (

   .DataIn    (DataIn[`ETH_MODER_WIDTH_1 + 7:8]),

   .DataOut   (MODEROut[`ETH_MODER_WIDTH_1 + 7:8]),

   .Write     (MODER_Wr[1]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

eth_register #(`ETH_MODER_WIDTH_2, `ETH_MODER_DEF_2)        MODER_2

  (

   .DataIn    (DataIn[`ETH_MODER_WIDTH_2 + 15:16]),

   .DataOut   (MODEROut[`ETH_MODER_WIDTH_2 + 15:16]),

   .Write     (MODER_Wr[2]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

assign MODEROut[31:`ETH_MODER_WIDTH_2 + 16] = 0;

// INT_MASK Register

eth_register #(`ETH_INT_MASK_WIDTH_0, `ETH_INT_MASK_DEF_0)  INT_MASK_0

  (

   .DataIn    (DataIn[`ETH_INT_MASK_WIDTH_0 - 1:0]),

   .DataOut   (INT_MASKOut[`ETH_INT_MASK_WIDTH_0 - 1:0]),

   .Write     (INT_MASK_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

assign INT_MASKOut[31:`ETH_INT_MASK_WIDTH_0] = 0;

// IPGT Register

eth_register #(`ETH_IPGT_WIDTH_0, `ETH_IPGT_DEF_0)          IPGT_0

  (

   .DataIn    (DataIn[`ETH_IPGT_WIDTH_0 - 1:0]),

   .DataOut   (IPGTOut[`ETH_IPGT_WIDTH_0 - 1:0]),

   .Write     (IPGT_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

assign IPGTOut[31:`ETH_IPGT_WIDTH_0] = 0;

// IPGR1 Register

eth_register #(`ETH_IPGR1_WIDTH_0, `ETH_IPGR1_DEF_0)        IPGR1_0

  (

   .DataIn    (DataIn[`ETH_IPGR1_WIDTH_0 - 1:0]),

   .DataOut   (IPGR1Out[`ETH_IPGR1_WIDTH_0 - 1:0]),

   .Write     (IPGR1_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

assign IPGR1Out[31:`ETH_IPGR1_WIDTH_0] = 0;

// IPGR2 Register

eth_register #(`ETH_IPGR2_WIDTH_0, `ETH_IPGR2_DEF_0)        IPGR2_0

  (

   .DataIn    (DataIn[`ETH_IPGR2_WIDTH_0 - 1:0]),

   .DataOut   (IPGR2Out[`ETH_IPGR2_WIDTH_0 - 1:0]),

   .Write     (IPGR2_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

assign IPGR2Out[31:`ETH_IPGR2_WIDTH_0] = 0;

// PACKETLEN Register

eth_register #(`ETH_PACKETLEN_WIDTH_0, `ETH_PACKETLEN_DEF_0) PACKETLEN_0

  (

   .DataIn    (DataIn[`ETH_PACKETLEN_WIDTH_0 - 1:0]),

   .DataOut   (PACKETLENOut[`ETH_PACKETLEN_WIDTH_0 - 1:0]),

   .Write     (PACKETLEN_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

eth_register #(`ETH_PACKETLEN_WIDTH_1, `ETH_PACKETLEN_DEF_1) PACKETLEN_1

  (

   .DataIn    (DataIn[`ETH_PACKETLEN_WIDTH_1 + 7:8]),

   .DataOut   (PACKETLENOut[`ETH_PACKETLEN_WIDTH_1 + 7:8]),

   .Write     (PACKETLEN_Wr[1]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

eth_register #(`ETH_PACKETLEN_WIDTH_2, `ETH_PACKETLEN_DEF_2) PACKETLEN_2

  (

   .DataIn    (DataIn[`ETH_PACKETLEN_WIDTH_2 + 15:16]),

   .DataOut   (PACKETLENOut[`ETH_PACKETLEN_WIDTH_2 + 15:16]),

   .Write     (PACKETLEN_Wr[2]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

eth_register #(`ETH_PACKETLEN_WIDTH_3, `ETH_PACKETLEN_DEF_3) PACKETLEN_3

  (

   .DataIn    (DataIn[`ETH_PACKETLEN_WIDTH_3 + 23:24]),

   .DataOut   (PACKETLENOut[`ETH_PACKETLEN_WIDTH_3 + 23:24]),

   .Write     (PACKETLEN_Wr[3]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

// COLLCONF Register

eth_register #(`ETH_COLLCONF_WIDTH_0, `ETH_COLLCONF_DEF_0)   COLLCONF_0

  (

   .DataIn    (DataIn[`ETH_COLLCONF_WIDTH_0 - 1:0]),

   .DataOut   (COLLCONFOut[`ETH_COLLCONF_WIDTH_0 - 1:0]),

   .Write     (COLLCONF_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

eth_register #(`ETH_COLLCONF_WIDTH_2, `ETH_COLLCONF_DEF_2)   COLLCONF_2

  (

   .DataIn    (DataIn[`ETH_COLLCONF_WIDTH_2 + 15:16]),

   .DataOut   (COLLCONFOut[`ETH_COLLCONF_WIDTH_2 + 15:16]),

   .Write     (COLLCONF_Wr[2]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

assign COLLCONFOut[15:`ETH_COLLCONF_WIDTH_0] = 0;

assign COLLCONFOut[31:`ETH_COLLCONF_WIDTH_2 + 16] = 0;

// TX_BD_NUM Register

eth_register #(`ETH_TX_BD_NUM_WIDTH_0, `ETH_TX_BD_NUM_DEF_0) TX_BD_NUM_0

  (

   .DataIn    (DataIn[`ETH_TX_BD_NUM_WIDTH_0 - 1:0]),

   .DataOut   (TX_BD_NUMOut[`ETH_TX_BD_NUM_WIDTH_0 - 1:0]),

   .Write     (TX_BD_NUM_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

assign TX_BD_NUMOut[31:`ETH_TX_BD_NUM_WIDTH_0] = 0;

// CTRLMODER Register

eth_register #(`ETH_CTRLMODER_WIDTH_0, `ETH_CTRLMODER_DEF_0)  CTRLMODER_0

  (

   .DataIn    (DataIn[`ETH_CTRLMODER_WIDTH_0 - 1:0]),

   .DataOut   (CTRLMODEROut[`ETH_CTRLMODER_WIDTH_0 - 1:0]),

   .Write     (CTRLMODER_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

assign CTRLMODEROut[31:`ETH_CTRLMODER_WIDTH_0] = 0;

// MIIMODER Register

eth_register #(`ETH_MIIMODER_WIDTH_0, `ETH_MIIMODER_DEF_0)    MIIMODER_0

  (

   .DataIn    (DataIn[`ETH_MIIMODER_WIDTH_0 - 1:0]),

   .DataOut   (MIIMODEROut[`ETH_MIIMODER_WIDTH_0 - 1:0]),

   .Write     (MIIMODER_Wr[0]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

eth_register #(`ETH_MIIMODER_WIDTH_1, `ETH_MIIMODER_DEF_1)    MIIMODER_1

  (

   .DataIn    (DataIn[`ETH_MIIMODER_WIDTH_1 + 7:8]),

   .DataOut   (MIIMODEROut[`ETH_MIIMODER_WIDTH_1 + 7:8]),

   .Write     (MIIMODER_Wr[1]),

   .Clk       (Clk),

   .Reset     (Reset),

   .SyncReset (1'b0)

  );

assign MIIMODEROut[31:`ETH_MIIMODER_WIDTH_1 + 8] = 0;

// MIICOMMAND Register

eth_register #(1, 0)                                      MIICOMMAND0

  (

   .DataIn    (DataIn[0]),