URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_wishbone.v] - Blame information for rev 118

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  eth_wishbone.v                                              ////
////                                                              ////
////  This file is part of the Ethernet IP core project           ////
////  http://www.opencores.org/projects/ethmac/                   ////
////                                                              ////
////  Author(s):                                                  ////
////      - Igor Mohor (igorM@opencores.org)                      ////
////                                                              ////
////  All additional information is avaliable in the Readme.txt   ////
////  file.                                                       ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2001, 2002 Authors                             ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.28  2002/07/18 16:11:46  mohor
// RxBDAddress takes `ETH_TX_BD_NUM_DEF value after reset.
//
// Revision 1.27  2002/07/11 02:53:20  mohor
// RxPointer bug fixed.
//
// Revision 1.26  2002/07/10 13:12:38  mohor
// Previous bug wasn't succesfully removed. Now fixed.
//
// Revision 1.25  2002/07/09 23:53:24  mohor
// Master state machine had a bug when switching from master write to
// master read.
//
// Revision 1.24  2002/07/09 20:44:41  mohor
// m_wb_cyc_o signal released after every single transfer.
//
// Revision 1.23  2002/05/03 10:15:50  mohor
// Outputs registered. Reset changed for eth_wishbone module.
//
// Revision 1.22  2002/04/24 08:52:19  mohor
// Compiler directives added. Tx and Rx fifo size incremented. A "late collision"
// bug fixed.
//
// Revision 1.21  2002/03/29 16:18:11  lampret
// Small typo fixed.
//
// Revision 1.20  2002/03/25 16:19:12  mohor
// Any address can be used for Tx and Rx BD pointers. Address does not need
// to be aligned.
//
// Revision 1.19  2002/03/19 12:51:50  mohor
// Comments in Slovene language removed.
//
// Revision 1.18  2002/03/19 12:46:52  mohor
// casex changed with case, fifo reset changed.
//
// Revision 1.17  2002/03/09 16:08:45  mohor
// rx_fifo was not always cleared ok. Fixed.
//
// Revision 1.16  2002/03/09 13:51:20  mohor
// Status was not latched correctly sometimes. Fixed.
//
// Revision 1.15  2002/03/08 06:56:46  mohor
// Big Endian problem when sending frames fixed.
//
// Revision 1.14  2002/03/02 19:12:40  mohor
// Byte ordering changed (Big Endian used). casex changed with case because
// Xilinx Foundation had problems. Tested in HW. It WORKS.
//
// Revision 1.13  2002/02/26 16:59:55  mohor
// Small fixes for external/internal DMA missmatches.
//
// Revision 1.12  2002/02/26 16:22:07  mohor
// Interrupts changed
//
// Revision 1.11  2002/02/15 17:07:39  mohor
// Status was not written correctly when frames were discarted because of
// address mismatch.
//
// Revision 1.10  2002/02/15 12:17:39  mohor
// RxStartFrm cleared when abort or retry comes.
//
// Revision 1.9  2002/02/15 11:59:10  mohor
// Changes that were lost when updating from 1.5 to 1.8 fixed.
//
// Revision 1.8  2002/02/14 20:54:33  billditt
// Addition  of new module eth_addrcheck.v
//
// Revision 1.7  2002/02/12 17:03:47  mohor
// RxOverRun added to statuses.
//
// Revision 1.6  2002/02/11 09:18:22  mohor
// Tx status is written back to the BD.
//
// Revision 1.5  2002/02/08 16:21:54  mohor
// Rx status is written back to the BD.
//
// Revision 1.4  2002/02/06 14:10:21  mohor
// non-DMA host interface added. Select the right configutation in eth_defines.
//
// Revision 1.3  2002/02/05 16:44:39  mohor
// Both rx and tx part are finished. Tested with wb_clk_i between 10 and 200
// MHz. Statuses, overrun, control frame transmission and reception still  need
// to be fixed.
//
// Revision 1.2  2002/02/01 12:46:51  mohor
// Tx part finished. TxStatus needs to be fixed. Pause request needs to be
// added.
//
// Revision 1.1  2002/01/23 10:47:59  mohor
// Initial version. Equals to eth_wishbonedma.v at this moment.
//
//
//
//
 
// Build pause frame
// Check GotData and evaluate data (abort or something like that comes before StartFrm)
// m_wb_err_i should start status underrun or uverrun
// r_RecSmall not used
 
`include "eth_defines.v"
`include "timescale.v"
 
 
module eth_wishbone
   (
 
    // WISHBONE common
    WB_CLK_I, WB_DAT_I, WB_DAT_O,
 
    // WISHBONE slave
                WB_ADR_I, WB_WE_I, WB_ACK_O,
    BDCs,
 
    Reset,
 
    // WISHBONE master
    m_wb_adr_o, m_wb_sel_o, m_wb_we_o,
    m_wb_dat_o, m_wb_dat_i, m_wb_cyc_o,
    m_wb_stb_o, m_wb_ack_i, m_wb_err_i,
 
    //TX
    MTxClk, TxStartFrm, TxEndFrm, TxUsedData, TxData,
    TxRetry, TxAbort, TxUnderRun, TxDone, TPauseRq, TxPauseTV, PerPacketCrcEn,
    PerPacketPad,
 
    //RX
    MRxClk, RxData, RxValid, RxStartFrm, RxEndFrm, RxAbort,
 
    // Register
    r_TxEn, r_RxEn, r_TxBDNum, TX_BD_NUM_Wr, r_RecSmall,
 
    WillSendControlFrame, TxCtrlEndFrm, // WillSendControlFrame out ?
 
    // Interrupts
    TxB_IRQ, TxE_IRQ, RxB_IRQ, RxE_IRQ, Busy_IRQ, TxC_IRQ, RxC_IRQ,
 
    // Rx Status
    InvalidSymbol, LatchedCrcError, RxLateCollision, ShortFrame, DribbleNibble,
    ReceivedPacketTooBig, RxLength, LoadRxStatus, ReceivedPacketGood,
 
    // Tx Status
    RetryCntLatched, RetryLimit, LateCollLatched, DeferLatched, CarrierSenseLost
 
                );
 
 
parameter Tp = 1;
 
// WISHBONE common
input           WB_CLK_I;       // WISHBONE clock
input  [31:0]   WB_DAT_I;       // WISHBONE data input
output [31:0]   WB_DAT_O;       // WISHBONE data output
 
// WISHBONE slave
input   [9:2]   WB_ADR_I;       // WISHBONE address input
input           WB_WE_I;        // WISHBONE write enable input
input           BDCs;           // Buffer descriptors are selected
output          WB_ACK_O;       // WISHBONE acknowledge output
 
// WISHBONE master
output  [31:0]  m_wb_adr_o;     // 
output   [3:0]  m_wb_sel_o;     // 
output          m_wb_we_o;      // 
output  [31:0]  m_wb_dat_o;     // 
output          m_wb_cyc_o;     // 
output          m_wb_stb_o;     // 
input   [31:0]  m_wb_dat_i;     // 
input           m_wb_ack_i;     // 
input           m_wb_err_i;     // 
 
input           Reset;       // Reset signal
 
// Rx Status signals
input           InvalidSymbol;    // Invalid symbol was received during reception in 100 Mbps mode
input           LatchedCrcError;  // CRC error
input           RxLateCollision;  // Late collision occured while receiving frame
input           ShortFrame;       // Frame shorter then the minimum size (r_MinFL) was received while small packets are enabled (r_RecSmall)
input           DribbleNibble;    // Extra nibble received
input           ReceivedPacketTooBig;// Received packet is bigger than r_MaxFL
input    [15:0] RxLength;         // Length of the incoming frame
input           LoadRxStatus;     // Rx status was loaded
input           ReceivedPacketGood;// Received packet's length and CRC are good
 
// Tx Status signals
input     [3:0] RetryCntLatched;  // Latched Retry Counter
input           RetryLimit;       // Retry limit reached (Retry Max value + 1 attempts were made)
input           LateCollLatched;  // Late collision occured
input           DeferLatched;     // Defer indication (Frame was defered before sucessfully sent)
input           CarrierSenseLost; // Carrier Sense was lost during the frame transmission
 
// Tx
input           MTxClk;         // Transmit clock (from PHY)
input           TxUsedData;     // Transmit packet used data
input           TxRetry;        // Transmit packet retry
input           TxAbort;        // Transmit packet abort
input           TxDone;         // Transmission ended
output          TxStartFrm;     // Transmit packet start frame
output          TxEndFrm;       // Transmit packet end frame
output  [7:0]   TxData;         // Transmit packet data byte
output          TxUnderRun;     // Transmit packet under-run
output          PerPacketCrcEn; // Per packet crc enable
output          PerPacketPad;   // Per packet pading
output          TPauseRq;       // Tx PAUSE control frame
output [15:0]   TxPauseTV;      // PAUSE timer value
input           WillSendControlFrame;
input           TxCtrlEndFrm;
 
// Rx
input           MRxClk;         // Receive clock (from PHY)
input   [7:0]   RxData;         // Received data byte (from PHY)
input           RxValid;        // 
input           RxStartFrm;     // 
input           RxEndFrm;       // 
input           RxAbort;        // This signal is set when address doesn't match.
 
//Register
input           r_TxEn;         // Transmit enable
input           r_RxEn;         // Receive enable
input   [7:0]   r_TxBDNum;      // Receive buffer descriptor number
input           TX_BD_NUM_Wr;   // RxBDNumber written
input           r_RecSmall;     // Receive small frames igor !!! tega uporabi
 
// Interrupts
output TxB_IRQ;
output TxE_IRQ;
output RxB_IRQ;
output RxE_IRQ;
output Busy_IRQ;
output TxC_IRQ;
output RxC_IRQ;
 
 
reg TxB_IRQ;
reg TxE_IRQ;
reg RxB_IRQ;
reg RxE_IRQ;
 
 
reg             TxStartFrm;
reg             TxEndFrm;
reg     [7:0]   TxData;
 
reg             TxUnderRun;
reg             TxUnderRun_wb;
 
reg             TxBDRead;
wire            TxStatusWrite;
 
reg     [1:0]   TxValidBytesLatched;
 
reg    [15:0]   TxLength;
reg    [15:0]   LatchedTxLength;
reg   [14:11]   TxStatus;
 
reg   [14:13]   RxStatus;
 
reg             TxStartFrm_wb;
reg             TxRetry_wb;
reg             TxAbort_wb;
reg             TxDone_wb;
 
reg             TxDone_wb_q;
reg             TxAbort_wb_q;
reg             TxRetry_wb_q;
reg             TxDone_wb_q2;
reg             TxAbort_wb_q2;
reg             TxRetry_wb_q2;
reg             RxBDReady;
reg             TxBDReady;
 
reg             RxBDRead;
wire            RxStatusWrite;
 
reg    [31:0]   TxDataLatched;
reg     [1:0]   TxByteCnt;
reg             LastWord;
reg             ReadTxDataFromFifo_tck;
 
reg             BlockingTxStatusWrite;
reg             BlockingTxBDRead;
 
reg             Flop;
 
reg     [7:0]   TxBDAddress;
reg     [7:0]   RxBDAddress;
 
reg             TxRetrySync1;
reg             TxAbortSync1;
reg             TxDoneSync1;
 
reg             TxAbort_q;
reg             TxRetry_q;
reg             TxUsedData_q;
 
reg    [31:0]   RxDataLatched2;
 
// reg    [23:0]   RxDataLatched1;
reg    [31:8]   RxDataLatched1;     // Big Endian Byte Ordering
 
reg     [1:0]   RxValidBytes;
reg     [1:0]   RxByteCnt;
reg             LastByteIn;
reg             ShiftWillEnd;
 
reg             WriteRxDataToFifo;
reg    [15:0]   LatchedRxLength;
reg             RxAbortLatched;
 
reg             ShiftEnded;
reg             RxOverrun;
 
reg             BDWrite;                    // BD Write Enable for access from WISHBONE side
reg             BDRead;                     // BD Read access from WISHBONE side
wire   [31:0]   RxBDDataIn;                 // Rx BD data in
wire   [31:0]   TxBDDataIn;                 // Tx BD data in
 
reg             TxEndFrm_wb;
 
wire            TxRetryPulse;
wire            TxDonePulse;
wire            TxAbortPulse;
wire            TxRetryPulse_q;
wire            TxDonePulse_q;
wire            TxAbortPulse_q;
 
wire            StartRxBDRead;
 
wire            StartTxBDRead;
 
wire            TxIRQEn;
wire            WrapTxStatusBit;
 
wire            RxIRQEn;
wire            WrapRxStatusBit;
 
wire    [1:0]   TxValidBytes;
 
wire    [7:0]   TempTxBDAddress;
wire    [7:0]   TempRxBDAddress;
 
wire            SetGotData;
wire            GotDataEvaluate;
 
reg             WB_ACK_O;
 
wire    [6:0]   RxStatusIn;
reg     [6:0]   RxStatusInLatched;
 
reg WbEn, WbEn_q;
reg RxEn, RxEn_q;
reg TxEn, TxEn_q;
 
wire ram_ce;
wire ram_we;
wire ram_oe;
reg [7:0]   ram_addr;
reg [31:0]  ram_di;
wire [31:0] ram_do;
 
wire StartTxPointerRead;
reg  TxPointerRead;
reg TxEn_needed;
reg RxEn_needed;
 
wire StartRxPointerRead;
reg RxPointerRead;
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      WB_ACK_O <=#Tp 1'b0;
    end
  else
    begin
      WB_ACK_O <=#Tp BDWrite & WbEn & WbEn_q | BDRead & WbEn & ~WbEn_q;
    end
end
 
assign WB_DAT_O = ram_do;
 
// Generic synchronous single-port RAM interface
generic_spram #(8, 32) ram (
        // Generic synchronous single-port RAM interface
        .clk(WB_CLK_I), .rst(Reset), .ce(ram_ce), .we(ram_we), .oe(ram_oe), .addr(ram_addr), .di(ram_di), .do(ram_do)
);
 
assign ram_ce = 1'b1;
assign ram_we = BDWrite & WbEn & WbEn_q | TxStatusWrite | RxStatusWrite;
assign ram_oe = BDRead & WbEn & WbEn_q | TxEn & TxEn_q & (TxBDRead | TxPointerRead) | RxEn & RxEn_q & (RxBDRead | RxPointerRead);
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxEn_needed <=#Tp 1'b0;
  else
  if(~TxBDReady & r_TxEn & WbEn & ~WbEn_q)
    TxEn_needed <=#Tp 1'b1;
  else
  if(TxPointerRead & TxEn & TxEn_q)
    TxEn_needed <=#Tp 1'b0;
end
 
// Enabling access to the RAM for three devices.
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      WbEn <=#Tp 1'b1;
      RxEn <=#Tp 1'b0;
      TxEn <=#Tp 1'b0;
      ram_addr <=#Tp 8'h0;
      ram_di <=#Tp 32'h0;
      BDRead <=#Tp 1'b0;
      BDWrite <=#Tp 1'b0;
    end
  else
    begin
      // Switching between three stages depends on enable signals
      case ({WbEn_q, RxEn_q, TxEn_q, RxEn_needed, TxEn_needed})  // synopsys parallel_case
        5'b100_10, 5'b100_11 :
          begin
            WbEn <=#Tp 1'b0;
            RxEn <=#Tp 1'b1;  // wb access stage and r_RxEn is enabled
            TxEn <=#Tp 1'b0;
            ram_addr <=#Tp RxBDAddress + RxPointerRead;
            ram_di <=#Tp RxBDDataIn;
          end
        5'b100_01 :
          begin
            WbEn <=#Tp 1'b0;
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b1;  // wb access stage, r_RxEn is disabled but r_TxEn is enabled
            ram_addr <=#Tp TxBDAddress + TxPointerRead;
            ram_di <=#Tp TxBDDataIn;
          end
        5'b010_00, 5'b010_10 :
          begin
            WbEn <=#Tp 1'b1;  // RxEn access stage and r_TxEn is disabled
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b0;
            ram_addr <=#Tp WB_ADR_I[9:2];
            ram_di <=#Tp WB_DAT_I;
            BDWrite <=#Tp BDCs & WB_WE_I;
            BDRead <=#Tp BDCs & ~WB_WE_I;
          end
        5'b010_01, 5'b010_11 :
          begin
            WbEn <=#Tp 1'b0;
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b1;  // RxEn access stage and r_TxEn is enabled
            ram_addr <=#Tp TxBDAddress + TxPointerRead;
            ram_di <=#Tp TxBDDataIn;
          end
        5'b001_00, 5'b001_01, 5'b001_10, 5'b001_11 :
          begin
            WbEn <=#Tp 1'b1;  // TxEn access stage (we always go to wb access stage)
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b0;
            ram_addr <=#Tp WB_ADR_I[9:2];
            ram_di <=#Tp WB_DAT_I;
            BDWrite <=#Tp BDCs & WB_WE_I;
            BDRead <=#Tp BDCs & ~WB_WE_I;
          end
        5'b100_00 :
          begin
            WbEn <=#Tp 1'b0;  // WbEn access stage and there is no need for other stages. WbEn needs to be switched off for a bit
          end
        5'b000_00 :
          begin
            WbEn <=#Tp 1'b1;  // Idle state. We go to WbEn access stage.
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b0;
            ram_addr <=#Tp WB_ADR_I[9:2];
            ram_di <=#Tp WB_DAT_I;
            BDWrite <=#Tp BDCs & WB_WE_I;
            BDRead <=#Tp BDCs & ~WB_WE_I;
          end
      endcase
    end
end
 
 
// Delayed stage signals
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      WbEn_q <=#Tp 1'b0;
      RxEn_q <=#Tp 1'b0;
      TxEn_q <=#Tp 1'b0;
    end
  else
    begin
      WbEn_q <=#Tp WbEn;
      RxEn_q <=#Tp RxEn;
      TxEn_q <=#Tp TxEn;
    end
end
 
// Changes for tx occur every second clock. Flop is used for this manner.
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    Flop <=#Tp 1'b0;
  else
  if(TxDone | TxAbort | TxRetry_q)
    Flop <=#Tp 1'b0;
  else
  if(TxUsedData)
    Flop <=#Tp ~Flop;
end
 
wire ResetTxBDReady;
assign ResetTxBDReady = TxDonePulse | TxAbortPulse | TxRetryPulse;
 
// Latching READY status of the Tx buffer descriptor
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxBDReady <=#Tp 1'b0;
  else
  if(TxEn & TxEn_q & TxBDRead)
    TxBDReady <=#Tp ram_do[15] & (ram_do[31:16] > 4); // TxBDReady is sampled only once at the beginning.
  else                                                // Only packets larger then 4 bytes are transmitted.
  if(ResetTxBDReady)
    TxBDReady <=#Tp 1'b0;
end
 
 
// Reading the Tx buffer descriptor
assign StartTxBDRead = (TxRetry_wb | TxStatusWrite) & ~BlockingTxBDRead & ~TxBDReady;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxBDRead <=#Tp 1'b1;
  else
  if(StartTxBDRead)
    TxBDRead <=#Tp 1'b1;
  else
  if(TxBDReady)
    TxBDRead <=#Tp 1'b0;
end
 
 
// Reading Tx BD pointer
assign StartTxPointerRead = TxBDRead & TxBDReady;
 
// Reading Tx BD Pointer
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxPointerRead <=#Tp 1'b0;
  else
  if(StartTxPointerRead)
    TxPointerRead <=#Tp 1'b1;
  else
  if(TxEn_q)
    TxPointerRead <=#Tp 1'b0;
end
 
 
// Writing status back to the Tx buffer descriptor
assign TxStatusWrite = (TxDone_wb | TxAbort_wb) & TxEn & TxEn_q & ~BlockingTxStatusWrite;
 
 
 
// Status writing must occur only once. Meanwhile it is blocked.
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    BlockingTxStatusWrite <=#Tp 1'b0;
  else
  if(TxStatusWrite)
    BlockingTxStatusWrite <=#Tp 1'b1;
  else
  if(~TxDone_wb & ~TxAbort_wb)
    BlockingTxStatusWrite <=#Tp 1'b0;
end
 
 
// TxBDRead state is activated only once. 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    BlockingTxBDRead <=#Tp 1'b0;
  else
  if(StartTxBDRead)
    BlockingTxBDRead <=#Tp 1'b1;
  else
  if(~StartTxBDRead & ~TxBDReady)
    BlockingTxBDRead <=#Tp 1'b0;
end
 
 
// Latching status from the tx buffer descriptor
// Data is avaliable one cycle after the access is started (at that time signal TxEn is not active)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxStatus <=#Tp 4'h0;
  else
  if(TxEn & TxEn_q & TxBDRead)
    TxStatus <=#Tp ram_do[14:11];
end
 
reg ReadTxDataFromMemory;
wire WriteRxDataToMemory;
 
reg MasterWbTX;
reg MasterWbRX;
 
reg [31:0] m_wb_adr_o;
reg        m_wb_cyc_o;
reg        m_wb_stb_o;
reg  [3:0] m_wb_sel_o;
reg        m_wb_we_o;
 
wire TxLengthEq0;
wire TxLengthLt4;
 
wire WordAccFinished;
wire HalfAccFinished;
 
//Latching length from the buffer descriptor;
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxLength <=#Tp 16'h0;
  else
  if(TxEn & TxEn_q & TxBDRead)
    TxLength <=#Tp ram_do[31:16];
  else
  if(MasterWbTX & m_wb_ack_i)
    begin
      if(TxLengthLt4)
        TxLength <=#Tp 16'h0;
      else if(WordAccFinished)
        TxLength <=#Tp TxLength - 3'h4;    // Length is subtracted at the data request
      else if(HalfAccFinished)
        TxLength <=#Tp TxLength - 2'h2;    // Length is subtracted at the data request
      else
        TxLength <=#Tp TxLength - 1'h1;    // Length is subtracted at the data request
    end
end
 
assign WordAccFinished = &m_wb_sel_o[3:0];
assign HalfAccFinished = &m_wb_sel_o[1:0];
 
 
 
//Latching length from the buffer descriptor;
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    LatchedTxLength <=#Tp 16'h0;
  else
  if(TxEn & TxEn_q & TxBDRead)
    LatchedTxLength <=#Tp ram_do[31:16];
end
 
assign TxLengthEq0 = TxLength == 0;
assign TxLengthLt4 = TxLength < 4;
 
 
reg BlockingIncrementTxPointer;
 
reg [31:0] TxPointer;
reg [1:0]  TxPointerLatched;
reg [31:0] RxPointer;
reg [1:0]  RxPointerLatched;
 
wire TxBurstAcc;
wire TxWordAcc;
wire TxHalfAcc;
wire TxByteAcc;
 
wire RxBurstAcc;
wire RxWordAcc;
wire RxHalfAcc;
wire RxByteAcc;
 
 
//Latching Tx buffer pointer from buffer descriptor;
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxPointer <=#Tp 0;
  else
  if(TxEn & TxEn_q & TxPointerRead)
    TxPointer <=#Tp ram_do;
  else
  if(MasterWbTX & ~BlockingIncrementTxPointer)
    if(TxWordAcc)
      TxPointer <=#Tp TxPointer + 3'h4; // Word access
    else if(TxHalfAcc)
      TxPointer <=#Tp TxPointer + 2'h2; // Half access
    else
      TxPointer <=#Tp TxPointer + 1'h1; // Byte access
end
 
 
 
//Latching last addresses from buffer descriptor (used as byte-half-word indicator);
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxPointerLatched[1:0] <=#Tp 0;
  else
  if(TxEn & TxEn_q & TxPointerRead)
    TxPointerLatched[1:0] <=#Tp ram_do[1:0];
end
 
 
assign TxBurstAcc = ~TxPointer[3] & ~TxPointer[2] & ~TxPointer[1] & ~TxPointer[0]; // Add a counter that count burst to 4
assign TxWordAcc  = ~TxPointer[1] & ~TxPointer[0];
assign TxHalfAcc  =  TxPointer[1] & ~TxPointer[0];
assign TxByteAcc  =  TxPointer[0];
 
wire [3:0] m_wb_sel_tmp_tx;
reg  [3:0] m_wb_sel_tmp_rx;
 
 
assign m_wb_sel_tmp_tx[0] = TxWordAcc | TxHalfAcc | TxByteAcc &  TxPointer[1];
assign m_wb_sel_tmp_tx[1] = TxWordAcc | TxHalfAcc;
assign m_wb_sel_tmp_tx[2] = TxWordAcc |             TxByteAcc & ~TxPointer[1];
assign m_wb_sel_tmp_tx[3] = TxWordAcc;
 
 
wire MasterAccessFinished;
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    BlockingIncrementTxPointer <=#Tp 0;
  else
  if(MasterAccessFinished)
    BlockingIncrementTxPointer <=#Tp 0;
  else
  if(MasterWbTX)
    BlockingIncrementTxPointer <=#Tp 1'b1;
end
 
 
wire TxBufferAlmostFull;
wire TxBufferFull;
wire TxBufferEmpty;
wire TxBufferAlmostEmpty;
wire ResetReadTxDataFromMemory;
wire SetReadTxDataFromMemory;
 
reg BlockReadTxDataFromMemory;
 
assign ResetReadTxDataFromMemory = (TxLengthEq0) | TxAbortPulse_q | TxRetryPulse_q;
assign SetReadTxDataFromMemory = TxEn & TxEn_q & TxPointerRead;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromMemory <=#Tp 1'b0;
  else
  if(ResetReadTxDataFromMemory)
    ReadTxDataFromMemory <=#Tp 1'b0;
  else
  if(SetReadTxDataFromMemory)
    ReadTxDataFromMemory <=#Tp 1'b1;
end
 
wire ReadTxDataFromMemory_2 = ReadTxDataFromMemory & ~BlockReadTxDataFromMemory;
wire [31:0] TxData_wb;
wire ReadTxDataFromFifo_wb;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    BlockReadTxDataFromMemory <=#Tp 1'b0;
  else
  if(ReadTxDataFromFifo_wb | ResetReadTxDataFromMemory)
    BlockReadTxDataFromMemory <=#Tp 1'b0;
  else
  if((TxBufferAlmostFull | TxLength <= 4)& MasterWbTX)
    BlockReadTxDataFromMemory <=#Tp 1'b1;
end
 
 
 
assign MasterAccessFinished = m_wb_ack_i | m_wb_err_i;
reg cyc_cleared;
 
// Enabling master wishbone access to the memory for two devices TX and RX.
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      MasterWbTX <=#Tp 1'b0;
      MasterWbRX <=#Tp 1'b0;
      m_wb_adr_o <=#Tp 32'h0;
      m_wb_cyc_o <=#Tp 1'b0;
      m_wb_stb_o <=#Tp 1'b0;
      m_wb_we_o  <=#Tp 1'b0;
      m_wb_sel_o <=#Tp 4'h0;
      cyc_cleared<=#Tp 1'b0;
    end
  else
    begin
      // Switching between two stages depends on enable signals
      casex ({MasterWbTX, MasterWbRX, ReadTxDataFromMemory_2, WriteRxDataToMemory, MasterAccessFinished, cyc_cleared})  // synopsys parallel_case
        6'b00_01_0_x, 6'b00_11_0_x :
          begin
            MasterWbTX <=#Tp 1'b0;  // idle and master write is needed (data write to rx buffer)
            MasterWbRX <=#Tp 1'b1;
            m_wb_adr_o <=#Tp RxPointer;
            m_wb_cyc_o <=#Tp 1'b1;
            m_wb_stb_o <=#Tp 1'b1;
            m_wb_we_o  <=#Tp 1'b1;
            m_wb_sel_o <=#Tp m_wb_sel_tmp_rx;
          end
        6'b00_10_0_x, 6'b00_10_1_x :
          begin
            MasterWbTX <=#Tp 1'b1;  // idle and master read is needed (data read from tx buffer)
            MasterWbRX <=#Tp 1'b0;
            m_wb_adr_o <=#Tp TxPointer;
            m_wb_cyc_o <=#Tp 1'b1;
            m_wb_stb_o <=#Tp 1'b1;
            m_wb_we_o  <=#Tp 1'b0;
            m_wb_sel_o <=#Tp m_wb_sel_tmp_tx;
          end
        6'b10_10_0_1 :
          begin
            MasterWbTX <=#Tp 1'b1;  // master read and master read is needed (data read from tx buffer)
            MasterWbRX <=#Tp 1'b0;
            m_wb_adr_o <=#Tp TxPointer;
            m_wb_cyc_o <=#Tp 1'b1;
            m_wb_stb_o <=#Tp 1'b1;
            m_wb_we_o  <=#Tp 1'b0;
            m_wb_sel_o <=#Tp m_wb_sel_tmp_tx;
            cyc_cleared<=#Tp 1'b0;
          end
        6'b01_01_0_1 :
          begin
            MasterWbTX <=#Tp 1'b0;  // master write and master write is needed (data write to rx buffer)
            MasterWbRX <=#Tp 1'b1;
            m_wb_adr_o <=#Tp RxPointer;
            m_wb_cyc_o <=#Tp 1'b1;
            m_wb_stb_o <=#Tp 1'b1;
            m_wb_we_o  <=#Tp 1'b1;
            m_wb_sel_o <=#Tp m_wb_sel_tmp_rx;
            cyc_cleared<=#Tp 1'b0;
          end
        6'b10_01_0_1, 6'b10_11_0_1 :
          begin
            MasterWbTX <=#Tp 1'b0;  // master read and master write is needed (data write to rx buffer)
            MasterWbRX <=#Tp 1'b1;
            m_wb_adr_o <=#Tp RxPointer;
            m_wb_cyc_o <=#Tp 1'b1;
            m_wb_stb_o <=#Tp 1'b1;
            m_wb_we_o  <=#Tp 1'b1;
            m_wb_sel_o <=#Tp m_wb_sel_tmp_rx;
            cyc_cleared<=#Tp 1'b0;
          end
        6'b01_10_0_1, 6'b01_11_0_1 :
          begin
            MasterWbTX <=#Tp 1'b1;  // master write and master read is needed (data read from tx buffer)
            MasterWbRX <=#Tp 1'b0;
            m_wb_adr_o <=#Tp TxPointer;
            m_wb_cyc_o <=#Tp 1'b1;
            m_wb_stb_o <=#Tp 1'b1;
            m_wb_we_o  <=#Tp 1'b0;
            m_wb_sel_o <=#Tp m_wb_sel_tmp_tx;
            cyc_cleared<=#Tp 1'b0;
          end
        6'b10_10_1_0, 6'b01_01_1_0, 6'b10_01_1_0, 6'b10_11_1_0, 6'b01_10_1_0, 6'b01_11_1_0 :
          begin
            m_wb_cyc_o <=#Tp 1'b0;  // whatever and master read or write is needed. We need to clear m_wb_cyc_o before next access is started
            m_wb_stb_o <=#Tp 1'b0;
            cyc_cleared<=#Tp 1'b1;
          end
        6'b10_00_1_x, 6'b01_00_1_x :
          begin
            MasterWbTX <=#Tp 1'b0;  // whatever and no master read or write is needed (ack or err comes finishing previous access)
            MasterWbRX <=#Tp 1'b0;
            m_wb_cyc_o <=#Tp 1'b0;
            m_wb_stb_o <=#Tp 1'b0;
          end
        default:                            // Don't touch
          begin
            MasterWbTX <=#Tp MasterWbTX;
            MasterWbRX <=#Tp MasterWbRX;
            m_wb_cyc_o <=#Tp m_wb_cyc_o;
            m_wb_stb_o <=#Tp m_wb_stb_o;
            m_wb_sel_o <=#Tp m_wb_sel_o;
          end
      endcase
    end
end
 
 
 
wire TxFifoClear;
wire [31:0] tx_fifo_dat_i;
 
assign TxFifoClear = (TxAbort_wb | TxRetry_wb) & ~TxBDReady;
 
reg  [23:16] LatchedData;
wire [23:16] TempData;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    LatchedData[23:16] <=#Tp 0;
  else
  if(MasterWbTX & m_wb_ack_i & m_wb_sel_o[2])
    LatchedData[23:16] <=#Tp m_wb_dat_i[23:16];
end
 
assign TempData[23:16] = m_wb_sel_o[2]? m_wb_dat_i[23:16] : LatchedData[23:16];
 
assign tx_fifo_dat_i[31:0] = {m_wb_dat_i[31:24], TempData[23:16], m_wb_dat_i[15:8], m_wb_dat_i[7:0]};
 
 
eth_fifo #(`TX_FIFO_DATA_WIDTH, `TX_FIFO_DEPTH, `TX_FIFO_CNT_WIDTH)
tx_fifo ( .data_in(tx_fifo_dat_i),                          .data_out(TxData_wb),
          .clk(WB_CLK_I),                                   .reset(Reset),
          .write(MasterWbTX & m_wb_ack_i & m_wb_sel_o[0]),  .read(ReadTxDataFromFifo_wb),
          .clear(TxFifoClear),                              .full(TxBufferFull),
          .almost_full(TxBufferAlmostFull),                 .almost_empty(TxBufferAlmostEmpty),
          .empty(TxBufferEmpty),                            .cnt()
        );
 
 
reg StartOccured;
reg TxStartFrm_sync1;
reg TxStartFrm_sync2;
reg TxStartFrm_syncb1;
reg TxStartFrm_syncb2;
 
 
 
// Start: Generation of the TxStartFrm_wb which is then synchronized to the MTxClk
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxStartFrm_wb <=#Tp 1'b0;
  else
  if(TxBDReady & ~StartOccured & (TxBufferFull | TxLengthEq0))
    TxStartFrm_wb <=#Tp 1'b1;
  else
  if(TxStartFrm_syncb2)
    TxStartFrm_wb <=#Tp 1'b0;
end
 
// StartOccured: TxStartFrm_wb occurs only ones at the beginning. Then it's blocked.
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    StartOccured <=#Tp 1'b0;
  else
  if(TxStartFrm_wb)
    StartOccured <=#Tp 1'b1;
  else
  if(ResetTxBDReady)
    StartOccured <=#Tp 1'b0;
end
 
// Synchronizing TxStartFrm_wb to MTxClk
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxStartFrm_sync1 <=#Tp 1'b0;
  else
    TxStartFrm_sync1 <=#Tp TxStartFrm_wb;
end
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxStartFrm_sync2 <=#Tp 1'b0;
  else
    TxStartFrm_sync2 <=#Tp TxStartFrm_sync1;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxStartFrm_syncb1 <=#Tp 1'b0;
  else
    TxStartFrm_syncb1 <=#Tp TxStartFrm_sync2;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxStartFrm_syncb2 <=#Tp 1'b0;
  else
    TxStartFrm_syncb2 <=#Tp TxStartFrm_syncb1;
end
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxStartFrm <=#Tp 1'b0;
  else
  if(TxStartFrm_sync2)
    TxStartFrm <=#Tp 1'b1;
  else
  if(TxUsedData_q | ~TxStartFrm_sync2 & (TxRetry | TxAbort))
    TxStartFrm <=#Tp 1'b0;
end
// End: Generation of the TxStartFrm_wb which is then synchronized to the MTxClk
 
 
// TxEndFrm_wb: indicator of the end of frame
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxEndFrm_wb <=#Tp 1'b0;
  else
  if(TxLengthLt4 & TxBufferAlmostEmpty & TxUsedData)
    TxEndFrm_wb <=#Tp 1'b1;
  else
  if(TxRetryPulse | TxDonePulse | TxAbortPulse)
    TxEndFrm_wb <=#Tp 1'b0;
end
 
 
// Marks which bytes are valid within the word.
assign TxValidBytes = TxLengthLt4 ? TxLength[1:0] : 2'b0;
 
reg LatchValidBytes;
reg LatchValidBytes_q;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    LatchValidBytes <=#Tp 1'b0;
  else
  if(TxLengthLt4 & TxBDReady)
    LatchValidBytes <=#Tp 1'b1;
  else
    LatchValidBytes <=#Tp 1'b0;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    LatchValidBytes_q <=#Tp 1'b0;
  else
    LatchValidBytes_q <=#Tp LatchValidBytes;
end
 
 
// Latching valid bytes
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxValidBytesLatched <=#Tp 2'h0;
  else
  if(LatchValidBytes & ~LatchValidBytes_q)
    TxValidBytesLatched <=#Tp TxValidBytes;
  else
  if(TxRetryPulse | TxDonePulse | TxAbortPulse)
    TxValidBytesLatched <=#Tp 2'h0;
end
 
 
assign TxIRQEn          = TxStatus[14];
assign WrapTxStatusBit  = TxStatus[13];
assign PerPacketPad     = TxStatus[12];
assign PerPacketCrcEn   = TxStatus[11];
 
 
assign RxIRQEn         = RxStatus[14];
assign WrapRxStatusBit = RxStatus[13];
 
 
// Temporary Tx and Rx buffer descriptor address 
assign TempTxBDAddress[7:0] = {8{ TxStatusWrite     & ~WrapTxStatusBit}} & (TxBDAddress + 2'h2) ; // Tx BD increment or wrap (last BD)
assign TempRxBDAddress[7:0] = {8{ WrapRxStatusBit}} & (r_TxBDNum)       | // Using first Rx BD
                              {8{~WrapRxStatusBit}} & (RxBDAddress + 2'h2) ; // Using next Rx BD (incremenrement address)
 
 
// Latching Tx buffer descriptor address
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxBDAddress <=#Tp 8'h0;
  else
  if(TxStatusWrite)
    TxBDAddress <=#Tp TempTxBDAddress;
end
 
 
// Latching Rx buffer descriptor address
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxBDAddress <=#Tp `ETH_TX_BD_NUM_DEF;
  else
  if(TX_BD_NUM_Wr)                        // When r_TxBDNum is updated, RxBDAddress is also
    RxBDAddress <=#Tp WB_DAT_I[7:0];
  else
  if(RxStatusWrite)
    RxBDAddress <=#Tp TempRxBDAddress;
end
 
wire [8:0] TxStatusInLatched = {TxUnderRun, RetryCntLatched[3:0], RetryLimit, LateCollLatched, DeferLatched, CarrierSenseLost};
 
assign RxBDDataIn = {LatchedRxLength, 1'b0, RxStatus, 6'h0, RxStatusInLatched};
assign TxBDDataIn = {LatchedTxLength, 1'b0, TxStatus, 2'h0, TxStatusInLatched};
 
 
// Signals used for various purposes
assign TxRetryPulse   = TxRetry_wb   & ~TxRetry_wb_q;
assign TxDonePulse    = TxDone_wb    & ~TxDone_wb_q;
assign TxAbortPulse   = TxAbort_wb   & ~TxAbort_wb_q;
assign TxRetryPulse_q = TxRetry_wb_q & ~TxRetry_wb_q2;
assign TxDonePulse_q  = TxDone_wb_q  & ~TxDone_wb_q2;
assign TxAbortPulse_q = TxAbort_wb_q & ~TxAbort_wb_q2;
 
 
assign TPauseRq = 0;
assign TxPauseTV[15:0] = TxLength[15:0];
 
 
// Generating delayed signals
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    begin
      TxAbort_q      <=#Tp 1'b0;
      TxRetry_q      <=#Tp 1'b0;
      TxUsedData_q   <=#Tp 1'b0;
    end
  else
    begin
      TxAbort_q      <=#Tp TxAbort;
      TxRetry_q      <=#Tp TxRetry;
      TxUsedData_q   <=#Tp TxUsedData;
    end
end
 
// Generating delayed signals
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      TxDone_wb_q   <=#Tp 1'b0;
      TxAbort_wb_q  <=#Tp 1'b0;
      TxRetry_wb_q  <=#Tp 1'b0;
      TxDone_wb_q2  <=#Tp 1'b0;
      TxAbort_wb_q2 <=#Tp 1'b0;
      TxRetry_wb_q2 <=#Tp 1'b0;
    end
  else
    begin
      TxDone_wb_q   <=#Tp TxDone_wb;
      TxAbort_wb_q  <=#Tp TxAbort_wb;
      TxRetry_wb_q  <=#Tp TxRetry_wb;
      TxDone_wb_q2  <=#Tp TxDone_wb_q;
      TxAbort_wb_q2 <=#Tp TxAbort_wb_q;
      TxRetry_wb_q2 <=#Tp TxRetry_wb_q;
    end
end
 
 
// Sinchronizing and evaluating tx data
//assign SetGotData = (TxStartFrm_wb | NewTxDataAvaliable_wb & ~TxAbort_wb & ~TxRetry_wb) & ~WB_CLK_I;
assign SetGotData = (TxStartFrm_wb); // igor namesto zgornje
 
// Evaluating data. If abort or retry occured meanwhile than data is ignored.
//assign GotDataEvaluate = GotDataSync3 & ~GotData & (~TxRetry & ~TxAbort | (TxRetry | TxAbort) & (TxStartFrm));
assign GotDataEvaluate = (~TxRetry & ~TxAbort | (TxRetry | TxAbort) & (TxStartFrm));
 
 
// Indication of the last word
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    LastWord <=#Tp 1'b0;
  else
  if((TxEndFrm | TxAbort | TxRetry) & Flop)
    LastWord <=#Tp 1'b0;
  else
  if(TxUsedData & Flop & TxByteCnt == 2'h3)
    LastWord <=#Tp TxEndFrm_wb;
end
 
 
// Tx end frame generation
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxEndFrm <=#Tp 1'b0;
  else
  if(Flop & TxEndFrm | TxAbort | TxRetry_q)
    TxEndFrm <=#Tp 1'b0;
  else
  if(Flop & LastWord)
    begin
      case (TxValidBytesLatched)  // synopsys parallel_case
        1 : TxEndFrm <=#Tp TxByteCnt == 2'h0;
        2 : TxEndFrm <=#Tp TxByteCnt == 2'h1;
        3 : TxEndFrm <=#Tp TxByteCnt == 2'h2;
 
        default : TxEndFrm <=#Tp 1'b0;
      endcase
    end
end
 
 
// Tx data selection (latching)
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxData <=#Tp 0;
  else
  if(TxStartFrm_sync2 & ~TxStartFrm)
    case(TxPointerLatched)  // synopsys parallel_case
      2'h0 : TxData <=#Tp TxData_wb[31:24];                  // Big Endian Byte Ordering
      2'h1 : TxData <=#Tp TxData_wb[23:16];                  // Big Endian Byte Ordering
      2'h2 : TxData <=#Tp TxData_wb[15:08];                  // Big Endian Byte Ordering
      2'h3 : TxData <=#Tp TxData_wb[07:00];                  // Big Endian Byte Ordering
    endcase
  else
  if(TxStartFrm & TxUsedData & TxPointerLatched==2'h3)
    TxData <=#Tp TxData_wb[31:24];                           // Big Endian Byte Ordering
  else
  if(TxUsedData & Flop)
    begin
      case(TxByteCnt)  // synopsys parallel_case
 
        1 : TxData <=#Tp TxDataLatched[23:16];
        2 : TxData <=#Tp TxDataLatched[15:8];
        3 : TxData <=#Tp TxDataLatched[7:0];
      endcase
    end
end
 
 
// Latching tx data
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxDataLatched[31:0] <=#Tp 32'h0;
  else
 if(TxStartFrm_sync2 & ~TxStartFrm | TxUsedData & Flop & TxByteCnt == 2'h3 | TxStartFrm & TxUsedData & Flop & TxByteCnt == 2'h0)
    TxDataLatched[31:0] <=#Tp TxData_wb[31:0];
end
 
 
// Tx under run
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxUnderRun_wb <=#Tp 1'b0;
  else
  if(TxAbortPulse)
    TxUnderRun_wb <=#Tp 1'b0;
  else
  if(TxBufferEmpty & ReadTxDataFromFifo_wb)
    TxUnderRun_wb <=#Tp 1'b1;
end
 
 
// Tx under run
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxUnderRun <=#Tp 1'b0;
  else
  if(TxUnderRun_wb)
    TxUnderRun <=#Tp 1'b1;
  else
  if(BlockingTxStatusWrite)
    TxUnderRun <=#Tp 1'b0;
end
 
 
// Tx Byte counter
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxByteCnt <=#Tp 2'h0;
  else
  if(TxAbort_q | TxRetry_q)
    TxByteCnt <=#Tp 2'h0;
  else
  if(TxStartFrm & ~TxUsedData)
    case(TxPointerLatched)  // synopsys parallel_case
      2'h0 : TxByteCnt <=#Tp 2'h1;
      2'h1 : TxByteCnt <=#Tp 2'h2;
      2'h2 : TxByteCnt <=#Tp 2'h3;
      2'h3 : TxByteCnt <=#Tp 2'h0;
    endcase
  else
  if(TxUsedData & Flop)
    TxByteCnt <=#Tp TxByteCnt + 1'b1;
end
 
 
// Start: Generation of the ReadTxDataFromFifo_tck signal and synchronization to the WB_CLK_I
reg ReadTxDataFromFifo_sync1;
reg ReadTxDataFromFifo_sync2;
reg ReadTxDataFromFifo_sync3;
reg ReadTxDataFromFifo_syncb1;
reg ReadTxDataFromFifo_syncb2;
 
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_tck <=#Tp 1'b0;
  else
  if(ReadTxDataFromFifo_syncb2)
    ReadTxDataFromFifo_tck <=#Tp 1'b0;
  else
  if(TxStartFrm_sync2 & ~TxStartFrm | TxUsedData & Flop & TxByteCnt == 2'h3 & ~LastWord | TxStartFrm & TxUsedData & Flop & TxByteCnt == 2'h0)
     ReadTxDataFromFifo_tck <=#Tp 1'b1;
end
 
// Synchronizing TxStartFrm_wb to MTxClk
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_sync1 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_sync1 <=#Tp ReadTxDataFromFifo_tck;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_sync2 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_sync2 <=#Tp ReadTxDataFromFifo_sync1;
end
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_syncb1 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_syncb1 <=#Tp ReadTxDataFromFifo_sync2;
end
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_syncb2 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_syncb2 <=#Tp ReadTxDataFromFifo_syncb1;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_sync3 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_sync3 <=#Tp ReadTxDataFromFifo_sync2;
end
 
assign ReadTxDataFromFifo_wb = ReadTxDataFromFifo_sync2 & ~ReadTxDataFromFifo_sync3;
// End: Generation of the ReadTxDataFromFifo_tck signal and synchronization to the WB_CLK_I
 
 
// Synchronizing TxRetry signal (synchronized to WISHBONE clock)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxRetrySync1 <=#Tp 1'b0;
  else
    TxRetrySync1 <=#Tp TxRetry;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxRetry_wb <=#Tp 1'b0;
  else
    TxRetry_wb <=#Tp TxRetrySync1;
end
 
 
// Synchronized TxDone_wb signal (synchronized to WISHBONE clock)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxDoneSync1 <=#Tp 1'b0;
  else
    TxDoneSync1 <=#Tp TxDone;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxDone_wb <=#Tp 1'b0;
  else
    TxDone_wb <=#Tp TxDoneSync1;
end
 
// Synchronizing TxAbort signal (synchronized to WISHBONE clock)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxAbortSync1 <=#Tp 1'b0;
  else
    TxAbortSync1 <=#Tp TxAbort;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxAbort_wb <=#Tp 1'b0;
  else
    TxAbort_wb <=#Tp TxAbortSync1;
end
 
 
assign StartRxBDRead = RxStatusWrite | RxAbortLatched;
 
// Reading the Rx buffer descriptor
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxBDRead <=#Tp 1'b1;
  else
  if(StartRxBDRead & ~RxBDReady)
    RxBDRead <=#Tp 1'b1;
  else
  if(RxBDReady)
    RxBDRead <=#Tp 1'b0;
end
 
 
// Reading of the next receive buffer descriptor starts after reception status is
// written to the previous one.
 
// Latching READY status of the Rx buffer descriptor
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxBDReady <=#Tp 1'b0;
  else
  if(RxEn & RxEn_q & RxBDRead)
    RxBDReady <=#Tp ram_do[15]; // RxBDReady is sampled only once at the beginning
  else
  if(ShiftEnded | RxAbort)
    RxBDReady <=#Tp 1'b0;
end
 
// Latching Rx buffer descriptor status
// Data is avaliable one cycle after the access is started (at that time signal RxEn is not active)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxStatus <=#Tp 2'h0;
  else
  if(RxEn & RxEn_q & RxBDRead)
    RxStatus <=#Tp ram_do[14:13];
end
 
 
 
 
// Reading Rx BD pointer
 
 
assign StartRxPointerRead = RxBDRead & RxBDReady;
 
// Reading Tx BD Pointer
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxPointerRead <=#Tp 1'b0;
  else
  if(StartRxPointerRead)
    RxPointerRead <=#Tp 1'b1;
  else
  if(RxEn_q)
    RxPointerRead <=#Tp 1'b0;
end
 
 
//Latching Rx buffer pointer from buffer descriptor;
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxPointer <=#Tp 32'h0;
  else
  if(RxEn & RxEn_q & RxPointerRead)
    RxPointer <=#Tp {ram_do[31:2], 2'h0};
  else
  if(MasterWbRX & m_wb_ack_i)
      RxPointer <=#Tp RxPointer + 3'h4; // Word access  (always word access. m_wb_sel_o are used for selecting bytes)
end
 
 
//Latching last addresses from buffer descriptor (used as byte-half-word indicator);
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxPointerLatched[1:0] <=#Tp 0;
  else
  if(MasterWbRX & m_wb_ack_i)                 // After first write all m_wb_sel_tmp_rx are active
    RxPointerLatched[1:0] <=#Tp 0;
  else
  if(RxEn & RxEn_q & RxPointerRead)
    RxPointerLatched[1:0] <=#Tp ram_do[1:0];
end
 
 
always @ (RxPointerLatched)
begin
  case(RxPointerLatched[1:0])  // synopsys parallel_case
    2'h0 : m_wb_sel_tmp_rx[3:0] = 4'hf;
    2'h1 : m_wb_sel_tmp_rx[3:0] = 4'h7;
    2'h2 : m_wb_sel_tmp_rx[3:0] = 4'h3;
    2'h3 : m_wb_sel_tmp_rx[3:0] = 4'h1;
  endcase
end
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxEn_needed <=#Tp 1'b0;
  else
  if(~RxBDReady & r_RxEn & WbEn & ~WbEn_q)
    RxEn_needed <=#Tp 1'b1;
  else
  if(RxPointerRead & RxEn & RxEn_q)
    RxEn_needed <=#Tp 1'b0;
end
 
 
// Reception status is written back to the buffer descriptor after the end of frame is detected.
assign RxStatusWrite = ShiftEnded & RxEn & RxEn_q;
 
reg RxStatusWriteLatched;
reg RxStatusWrite_rck;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxStatusWriteLatched <=#Tp 1'b0;
  else
  if(RxStatusWrite & ~RxStatusWrite_rck)
    RxStatusWriteLatched <=#Tp 1'b1;
  else
  if(RxStatusWrite_rck)
    RxStatusWriteLatched <=#Tp 1'b0;
end
 
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxStatusWrite_rck <=#Tp 1'b0;
  else
  if(RxStatusWriteLatched)
    RxStatusWrite_rck <=#Tp 1'b1;
  else
    RxStatusWrite_rck <=#Tp 1'b0;
end
 
 
reg RxEnableWindow;
 
// Indicating that last byte is being reveived
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    LastByteIn <=#Tp 1'b0;
  else
  if(ShiftWillEnd & (&RxByteCnt) | RxAbort)
    LastByteIn <=#Tp 1'b0;
  else
  if(RxValid & RxBDReady & RxEndFrm & ~(&RxByteCnt) & RxEnableWindow)
    LastByteIn <=#Tp 1'b1;
end
 
reg ShiftEnded_tck;
reg ShiftEndedSync1;
reg ShiftEndedSync2;
reg ShiftEndedSync3;
reg ShiftEndedSync_c1;
reg ShiftEndedSync_c2;
 
wire StartShiftWillEnd;
//assign StartShiftWillEnd = LastByteIn & (&RxByteCnt) | RxValid & RxEndFrm & (&RxByteCnt) & RxEnableWindow;
assign StartShiftWillEnd = LastByteIn  | RxValid & RxEndFrm & (&RxByteCnt) & RxEnableWindow;
 
// Indicating that data reception will end
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    ShiftWillEnd <=#Tp 1'b0;
  else
  if(ShiftEnded_tck | RxAbort)
    ShiftWillEnd <=#Tp 1'b0;
  else
  if(StartShiftWillEnd)
    ShiftWillEnd <=#Tp 1'b1;
end
 
 
 
// Receive byte counter
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxByteCnt <=#Tp 2'h0;
  else
  if(ShiftEnded_tck | RxAbort)
    RxByteCnt <=#Tp 2'h0;
  else
  if(RxValid & RxStartFrm & RxBDReady)
    case(RxPointerLatched)  // synopsys parallel_case
      2'h0 : RxByteCnt <=#Tp 2'h1;
      2'h1 : RxByteCnt <=#Tp 2'h2;
      2'h2 : RxByteCnt <=#Tp 2'h3;
      2'h3 : RxByteCnt <=#Tp 2'h0;
    endcase
  else
  if(RxValid & RxEnableWindow & RxBDReady | LastByteIn)
    RxByteCnt <=#Tp RxByteCnt + 1'b1;
end
 
 
// Indicates how many bytes are valid within the last word
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxValidBytes <=#Tp 2'h1;
  else
  if(RxValid & RxStartFrm)
    case(RxPointerLatched)  // synopsys parallel_case
      2'h0 : RxValidBytes <=#Tp 2'h1;
      2'h1 : RxValidBytes <=#Tp 2'h2;
      2'h2 : RxValidBytes <=#Tp 2'h3;
      2'h3 : RxValidBytes <=#Tp 2'h0;
    endcase
  else
  if(RxValid & ~LastByteIn & ~RxStartFrm & RxEnableWindow)
    RxValidBytes <=#Tp RxValidBytes + 1;
end
 
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxDataLatched1       <=#Tp 24'h0;
  else
  if(RxValid & RxBDReady & ~LastByteIn)
    if(RxStartFrm)
    begin
      case(RxPointerLatched)     // synopsys parallel_case
        2'h0:        RxDataLatched1[31:24] <=#Tp RxData;            // Big Endian Byte Ordering
        2'h1:        RxDataLatched1[23:16] <=#Tp RxData;
        2'h2:        RxDataLatched1[15:8]  <=#Tp RxData;
        2'h3:        RxDataLatched1        <=#Tp RxDataLatched1;
      endcase
    end
    else if (RxEnableWindow)
    begin
      case(RxByteCnt)     // synopsys parallel_case
        2'h0:        RxDataLatched1[31:24] <=#Tp RxData;            // Big Endian Byte Ordering
        2'h1:        RxDataLatched1[23:16] <=#Tp RxData;
        2'h2:        RxDataLatched1[15:8]  <=#Tp RxData;
        2'h3:        RxDataLatched1        <=#Tp RxDataLatched1;
      endcase
    end
end
 
wire SetWriteRxDataToFifo;
 
// Assembling data that will be written to the rx_fifo
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxDataLatched2 <=#Tp 32'h0;
  else
  if(SetWriteRxDataToFifo & ~ShiftWillEnd)
    RxDataLatched2 <=#Tp {RxDataLatched1[31:8], RxData};              // Big Endian Byte Ordering
  else
  if(SetWriteRxDataToFifo & ShiftWillEnd)
    case(RxValidBytes)  // synopsys parallel_case
//      0 : RxDataLatched2 <=#Tp {RxDataLatched1[31:8],  RxData};       // Big Endian Byte Ordering
//      1 : RxDataLatched2 <=#Tp {RxDataLatched1[31:24], 24'h0};
//      2 : RxDataLatched2 <=#Tp {RxDataLatched1[31:16], 16'h0};
//      3 : RxDataLatched2 <=#Tp {RxDataLatched1[31:8],   8'h0};
 
      1 : RxDataLatched2 <=#Tp {RxDataLatched1[31:24], 24'h0};
      2 : RxDataLatched2 <=#Tp {RxDataLatched1[31:16], 16'h0};
      3 : RxDataLatched2 <=#Tp {RxDataLatched1[31:8],   8'h0};
    endcase
end
 
 
reg WriteRxDataToFifoSync1;
reg WriteRxDataToFifoSync2;
 
 
// Indicating start of the reception process
//assign SetWriteRxDataToFifo = (RxValid & RxBDReady & ~RxStartFrm & RxEnableWindow & (&RxByteCnt)) | (ShiftWillEnd & LastByteIn & (&RxByteCnt));
assign SetWriteRxDataToFifo = (RxValid & RxBDReady & ~RxStartFrm & RxEnableWindow & (&RxByteCnt)) | (RxValid & RxBDReady & RxStartFrm & (&RxPointerLatched)) | (ShiftWillEnd & LastByteIn & (&RxByteCnt));
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    WriteRxDataToFifo <=#Tp 1'b0;
  else
  if(SetWriteRxDataToFifo & ~RxAbort)
    WriteRxDataToFifo <=#Tp 1'b1;
  else
  if(WriteRxDataToFifoSync1 | RxAbort)
    WriteRxDataToFifo <=#Tp 1'b0;
end
 
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    WriteRxDataToFifoSync1 <=#Tp 1'b0;
  else
  if(WriteRxDataToFifo)
    WriteRxDataToFifoSync1 <=#Tp 1'b1;
  else
    WriteRxDataToFifoSync1 <=#Tp 1'b0;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    WriteRxDataToFifoSync2 <=#Tp 1'b0;
  else
    WriteRxDataToFifoSync2 <=#Tp WriteRxDataToFifoSync1;
end
 
wire WriteRxDataToFifo_wb;
assign WriteRxDataToFifo_wb = WriteRxDataToFifoSync1 & ~WriteRxDataToFifoSync2;
 
reg RxAbortSync1;
reg RxAbortSync2;
reg RxAbortSyncb1;
reg RxAbortSyncb2;
 
reg LatchedRxStartFrm;
reg SyncRxStartFrm;
reg SyncRxStartFrm_q;
wire RxFifoReset;
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    LatchedRxStartFrm <=#Tp 0;
  else
  if(RxStartFrm & ~SyncRxStartFrm)
    LatchedRxStartFrm <=#Tp 1;
  else
  if(SyncRxStartFrm)
    LatchedRxStartFrm <=#Tp 0;
end
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    SyncRxStartFrm <=#Tp 0;
  else
  if(LatchedRxStartFrm)
    SyncRxStartFrm <=#Tp 1;
  else
    SyncRxStartFrm <=#Tp 0;
end
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    SyncRxStartFrm_q <=#Tp 0;
  else
    SyncRxStartFrm_q <=#Tp SyncRxStartFrm;
end
 
 
assign RxFifoReset = SyncRxStartFrm & ~SyncRxStartFrm_q;
 
 
eth_fifo #(`RX_FIFO_DATA_WIDTH, `RX_FIFO_DEPTH, `RX_FIFO_CNT_WIDTH)
rx_fifo (.data_in(RxDataLatched2),                      .data_out(m_wb_dat_o),
         .clk(WB_CLK_I),                                .reset(Reset),
         .write(WriteRxDataToFifo_wb),                  .read(MasterWbRX & m_wb_ack_i),
         .clear(RxFifoReset),                           .full(RxBufferFull),
         .almost_full(),                                .almost_empty(RxBufferAlmostEmpty),
         .empty(RxBufferEmpty),                         .cnt()
        );
 
assign WriteRxDataToMemory = ~RxBufferEmpty & (~MasterWbRX | ~RxBufferAlmostEmpty);
 
 
 
// Generation of the end-of-frame signal
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    ShiftEnded_tck <=#Tp 1'b0;
  else
  if(~RxAbort & SetWriteRxDataToFifo & StartShiftWillEnd)
    ShiftEnded_tck <=#Tp 1'b1;
  else
  if(RxAbort | ShiftEndedSync_c1 & ShiftEndedSync_c2)
    ShiftEnded_tck <=#Tp 1'b0;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ShiftEndedSync1 <=#Tp 1'b0;
  else
    ShiftEndedSync1 <=#Tp ShiftEnded_tck;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ShiftEndedSync2 <=#Tp 1'b0;
  else
    ShiftEndedSync2 <=#Tp ShiftEndedSync1;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ShiftEndedSync3 <=#Tp 1'b0;
  else
  if(ShiftEndedSync1 & ~ShiftEndedSync2)
    ShiftEndedSync3 <=#Tp 1'b1;
  else
  if(ShiftEnded)
    ShiftEndedSync3 <=#Tp 1'b0;
end
 
// Generation of the end-of-frame signal
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ShiftEnded <=#Tp 1'b0;
  else
  if(ShiftEndedSync3 & MasterWbRX & m_wb_ack_i & RxBufferAlmostEmpty & ~ShiftEnded)
    ShiftEnded <=#Tp 1'b1;
  else
  if(RxStatusWrite)
    ShiftEnded <=#Tp 1'b0;
end
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    ShiftEndedSync_c1 <=#Tp 1'b0;
  else
    ShiftEndedSync_c1 <=#Tp ShiftEndedSync2;
end
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    ShiftEndedSync_c2 <=#Tp 1'b0;
  else
    ShiftEndedSync_c2 <=#Tp ShiftEndedSync_c1;
end
 
// Generation of the end-of-frame signal
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxEnableWindow <=#Tp 1'b0;
  else
  if(RxStartFrm)
    RxEnableWindow <=#Tp 1'b1;
  else
  if(RxEndFrm | RxAbort)
    RxEnableWindow <=#Tp 1'b0;
end
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxAbortSync1 <=#Tp 1'b0;
  else
    RxAbortSync1 <=#Tp RxAbort;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxAbortSync2 <=#Tp 1'b0;
  else
    RxAbortSync2 <=#Tp RxAbortSync1;
end
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxAbortSyncb1 <=#Tp 1'b0;
  else
    RxAbortSyncb1 <=#Tp RxAbortSync2;
end
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxAbortSyncb2 <=#Tp 1'b0;
  else
    RxAbortSyncb2 <=#Tp RxAbortSyncb1;
end
 
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxAbortLatched <=#Tp 1'b0;
  else
  if(RxAbort)
    RxAbortLatched <=#Tp 1'b1;
  else
  if(RxStartFrm)
    RxAbortLatched <=#Tp 1'b0;
end
 
 
reg LoadStatusBlocked;
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    LoadStatusBlocked <=#Tp 1'b0;
  else
  if(LoadRxStatus & ~RxAbortLatched)
    LoadStatusBlocked <=#Tp 1'b1;
  else
  if(RxStatusWrite_rck | RxStartFrm)
    LoadStatusBlocked <=#Tp 1'b0;
end
 
// LatchedRxLength[15:0]
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    LatchedRxLength[15:0] <=#Tp 16'h0;
  else
  if(LoadRxStatus & ~RxAbortLatched & ~LoadStatusBlocked)
    LatchedRxLength[15:0] <=#Tp RxLength[15:0];
end
 
 
assign RxStatusIn = {RxOverrun, InvalidSymbol, DribbleNibble, ReceivedPacketTooBig, ShortFrame, LatchedCrcError, RxLateCollision};
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxStatusInLatched <=#Tp 'h0;
  else
  if(LoadRxStatus & ~RxAbortLatched & ~LoadStatusBlocked)
    RxStatusInLatched <=#Tp RxStatusIn;
end
 
 
// Rx overrun
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxOverrun <=#Tp 1'b0;
  else
  if(RxStatusWrite)
    RxOverrun <=#Tp 1'b0;
  else
  if(RxBufferFull & WriteRxDataToFifo_wb)
    RxOverrun <=#Tp 1'b1;
end
 
 
 
wire TxError;
assign TxError = TxUnderRun | RetryLimit | LateCollLatched | CarrierSenseLost;
 
wire RxError;
assign RxError = |RxStatusInLatched[6:0];
 
// Tx Done Interrupt
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxB_IRQ <=#Tp 1'b0;
  else
  if(TxStatusWrite & TxIRQEn)
    TxB_IRQ <=#Tp ~TxError;
  else
    TxB_IRQ <=#Tp 1'b0;
end
 
 
// Tx Error Interrupt
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxE_IRQ <=#Tp 1'b0;
  else
  if(TxStatusWrite & TxIRQEn)
    TxE_IRQ <=#Tp TxError;
  else
    TxE_IRQ <=#Tp 1'b0;
end
 
 
// Rx Done Interrupt
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxB_IRQ <=#Tp 1'b0;
  else
  if(RxStatusWrite & RxIRQEn)
    RxB_IRQ <=#Tp ReceivedPacketGood;
  else
    RxB_IRQ <=#Tp 1'b0;
end
 
 
// Rx Error Interrupt
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxE_IRQ <=#Tp 1'b0;
  else
  if(RxStatusWrite & RxIRQEn)
    RxE_IRQ <=#Tp RxError;
  else
    RxE_IRQ <=#Tp 1'b0;
end
 
 
assign RxC_IRQ = 1'b0;
assign TxC_IRQ = 1'b0;
assign Busy_IRQ = 1'b0;
 
 
 
 
 
// TX
// bit 15 ready
// bit 14 interrupt
// bit 13 wrap
// bit 12 pad
// bit 11 crc
// bit 10 last
// bit 9  pause request (control frame)
// bit 8  TxUnderRun          
// bit 7-4 RetryCntLatched    
// bit 3  retransmittion limit
// bit 2  LateCollLatched        
// bit 1  DeferLatched        
// bit 0  CarrierSenseLost    
 
 
// RX
// bit 15 od rx je empty
// bit 14 od rx je interrupt
// bit 13 od rx je wrap
// bit 12 od rx je reserved
// bit 11 od rx je reserved
// bit 10 od rx je reserved
// bit 9  od rx je reserved
// bit 8  od rx je reserved
// bit 7  od rx je Miss
// bit 6  od rx je RxOverrun
// bit 5  od rx je InvalidSymbol
// bit 4  od rx je DribbleNibble
// bit 3  od rx je ReceivedPacketTooBig
// bit 2  od rx je ShortFrame
// bit 1  od rx je LatchedCrcError
// bit 0  od rx je RxLateCollision
 
 
 
endmodule
 

Line No.	Rev	Author	Line
1	38	mohor	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// eth_wishbone.v ////`
4			`//// ////`
5			`//// This file is part of the Ethernet IP core project ////`
6			`//// http://www.opencores.org/projects/ethmac/ ////`
7			`//// ////`
8			`//// Author(s): ////`
9			`//// - Igor Mohor (igorM@opencores.org) ////`
10			`//// ////`
11			`//// All additional information is avaliable in the Readme.txt ////`
12			`//// file. ////`
13			`//// ////`
14			`//////////////////////////////////////////////////////////////////////`
15			`//// ////`
16	118	mohor	`//// Copyright (C) 2001, 2002 Authors ////`
17	38	mohor	`//// ////`
18			`//// This source file may be used and distributed without ////`
19			`//// restriction provided that this copyright statement is not ////`
20			`//// removed from the file and that any derivative work contains ////`
21			`//// the original copyright notice and the associated disclaimer. ////`
22			`//// ////`
23			`//// This source file is free software; you can redistribute it ////`
24			`//// and/or modify it under the terms of the GNU Lesser General ////`
25			`//// Public License as published by the Free Software Foundation; ////`
26			`//// either version 2.1 of the License, or (at your option) any ////`
27			`//// later version. ////`
28			`//// ////`
29			`//// This source is distributed in the hope that it will be ////`
30			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
31			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
32			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
33			`//// details. ////`
34			`//// ////`
35			`//// You should have received a copy of the GNU Lesser General ////`
36			`//// Public License along with this source; if not, download it ////`
37			`//// from http://www.opencores.org/lgpl.shtml ////`
38			`//// ////`
39			`//////////////////////////////////////////////////////////////////////`
40			`//`
41			`// CVS Revision History`
42			`//`
43			`// $Log: not supported by cvs2svn $`
44	118	mohor	`// Revision 1.28 2002/07/18 16:11:46 mohor`
45			// RxBDAddress takes `ETH_TX_BD_NUM_DEF value after reset.
46			`//`
47	115	mohor	`// Revision 1.27 2002/07/11 02:53:20 mohor`
48			`// RxPointer bug fixed.`
49			`//`
50	113	mohor	`// Revision 1.26 2002/07/10 13:12:38 mohor`
51			`// Previous bug wasn't succesfully removed. Now fixed.`
52			`//`
53	112	mohor	`// Revision 1.25 2002/07/09 23:53:24 mohor`
54			`// Master state machine had a bug when switching from master write to`
55			`// master read.`
56			`//`
57	111	mohor	`// Revision 1.24 2002/07/09 20:44:41 mohor`
58			`// m_wb_cyc_o signal released after every single transfer.`
59			`//`
60	110	mohor	`// Revision 1.23 2002/05/03 10:15:50 mohor`
61			`// Outputs registered. Reset changed for eth_wishbone module.`
62			`//`
63	106	mohor	`// Revision 1.22 2002/04/24 08:52:19 mohor`
64			`// Compiler directives added. Tx and Rx fifo size incremented. A "late collision"`
65			`// bug fixed.`
66			`//`
67	105	mohor	`// Revision 1.21 2002/03/29 16:18:11 lampret`
68			`// Small typo fixed.`
69			`//`
70	97	lampret	`// Revision 1.20 2002/03/25 16:19:12 mohor`
71			`// Any address can be used for Tx and Rx BD pointers. Address does not need`
72			`// to be aligned.`
73			`//`
74	96	mohor	`// Revision 1.19 2002/03/19 12:51:50 mohor`
75			`// Comments in Slovene language removed.`
76			`//`
77	91	mohor	`// Revision 1.18 2002/03/19 12:46:52 mohor`
78			`// casex changed with case, fifo reset changed.`
79			`//`
80	90	mohor	`// Revision 1.17 2002/03/09 16:08:45 mohor`
81			`// rx_fifo was not always cleared ok. Fixed.`
82			`//`
83	88	mohor	`// Revision 1.16 2002/03/09 13:51:20 mohor`
84			`// Status was not latched correctly sometimes. Fixed.`
85			`//`
86	87	mohor	`// Revision 1.15 2002/03/08 06:56:46 mohor`
87			`// Big Endian problem when sending frames fixed.`
88			`//`
89	86	mohor	`// Revision 1.14 2002/03/02 19:12:40 mohor`
90			`// Byte ordering changed (Big Endian used). casex changed with case because`
91			`// Xilinx Foundation had problems. Tested in HW. It WORKS.`
92			`//`
93	82	mohor	`// Revision 1.13 2002/02/26 16:59:55 mohor`
94			`// Small fixes for external/internal DMA missmatches.`
95			`//`
96	80	mohor	`// Revision 1.12 2002/02/26 16:22:07 mohor`
97			`// Interrupts changed`
98			`//`
99	77	mohor	`// Revision 1.11 2002/02/15 17:07:39 mohor`
100			`// Status was not written correctly when frames were discarted because of`
101			`// address mismatch.`
102			`//`
103	64	mohor	`// Revision 1.10 2002/02/15 12:17:39 mohor`
104			`// RxStartFrm cleared when abort or retry comes.`
105			`//`
106	61	mohor	`// Revision 1.9 2002/02/15 11:59:10 mohor`
107			`// Changes that were lost when updating from 1.5 to 1.8 fixed.`
108			`//`
109	60	mohor	`// Revision 1.8 2002/02/14 20:54:33 billditt`
110			`// Addition of new module eth_addrcheck.v`
111			`//`
112			`// Revision 1.7 2002/02/12 17:03:47 mohor`
113			`// RxOverRun added to statuses.`
114			`//`
115			`// Revision 1.6 2002/02/11 09:18:22 mohor`
116			`// Tx status is written back to the BD.`
117			`//`
118	43	mohor	`// Revision 1.5 2002/02/08 16:21:54 mohor`
119			`// Rx status is written back to the BD.`
120			`//`
121	42	mohor	`// Revision 1.4 2002/02/06 14:10:21 mohor`
122			`// non-DMA host interface added. Select the right configutation in eth_defines.`
123			`//`
124	41	mohor	`// Revision 1.3 2002/02/05 16:44:39 mohor`
125			`// Both rx and tx part are finished. Tested with wb_clk_i between 10 and 200`
126			`// MHz. Statuses, overrun, control frame transmission and reception still need`
127			`// to be fixed.`
128			`//`
129	40	mohor	`// Revision 1.2 2002/02/01 12:46:51 mohor`
130			`// Tx part finished. TxStatus needs to be fixed. Pause request needs to be`
131			`// added.`
132			`//`
133	39	mohor	`// Revision 1.1 2002/01/23 10:47:59 mohor`
134			`// Initial version. Equals to eth_wishbonedma.v at this moment.`
135	38	mohor	`//`
136			`//`
137			`//`
138	39	mohor	`//`
139	38	mohor
140	77	mohor	`// Build pause frame`
141			`// Check GotData and evaluate data (abort or something like that comes before StartFrm)`
142			`// m_wb_err_i should start status underrun or uverrun`
143			`// r_RecSmall not used`
144	38	mohor
145			`include "eth_defines.v"
146			`include "timescale.v"
147
148
149			`module eth_wishbone`
150			`(`
151
152			`// WISHBONE common`
153	40	mohor	`WB_CLK_I, WB_DAT_I, WB_DAT_O,`
154	38	mohor
155			`// WISHBONE slave`
156	77	mohor	`WB_ADR_I, WB_WE_I, WB_ACK_O,`
157	40	mohor	`BDCs,`
158	38	mohor
159	40	mohor	`Reset,`
160
161	39	mohor	`// WISHBONE master`
162			`m_wb_adr_o, m_wb_sel_o, m_wb_we_o,`
163			`m_wb_dat_o, m_wb_dat_i, m_wb_cyc_o,`
164			`m_wb_stb_o, m_wb_ack_i, m_wb_err_i,`
165
166	38	mohor	`//TX`
167	60	mohor	`MTxClk, TxStartFrm, TxEndFrm, TxUsedData, TxData,`
168	38	mohor	`TxRetry, TxAbort, TxUnderRun, TxDone, TPauseRq, TxPauseTV, PerPacketCrcEn,`
169			`PerPacketPad,`
170
171			`//RX`
172	40	mohor	`MRxClk, RxData, RxValid, RxStartFrm, RxEndFrm, RxAbort,`
173	38	mohor
174			`// Register`
175	77	mohor	`r_TxEn, r_RxEn, r_TxBDNum, TX_BD_NUM_Wr, r_RecSmall,`
176	38	mohor
177	91	mohor	`WillSendControlFrame, TxCtrlEndFrm, // WillSendControlFrame out ?`
178	38	mohor
179			`// Interrupts`
180	77	mohor	`TxB_IRQ, TxE_IRQ, RxB_IRQ, RxE_IRQ, Busy_IRQ, TxC_IRQ, RxC_IRQ,`
181	42	mohor
182	60	mohor	`// Rx Status`
183	42	mohor	`InvalidSymbol, LatchedCrcError, RxLateCollision, ShortFrame, DribbleNibble,`
184	77	mohor	`ReceivedPacketTooBig, RxLength, LoadRxStatus, ReceivedPacketGood,`
185	60	mohor
186			`// Tx Status`
187			`RetryCntLatched, RetryLimit, LateCollLatched, DeferLatched, CarrierSenseLost`
188	110	mohor
189	38	mohor	`);`
190
191
192			`parameter Tp = 1;`
193
194			`// WISHBONE common`
195			`input WB_CLK_I; // WISHBONE clock`
196			`input [31:0] WB_DAT_I; // WISHBONE data input`
197			`output [31:0] WB_DAT_O; // WISHBONE data output`
198
199			`// WISHBONE slave`
200			`input [9:2] WB_ADR_I; // WISHBONE address input`
201			`input WB_WE_I; // WISHBONE write enable input`
202			`input BDCs; // Buffer descriptors are selected`
203			`output WB_ACK_O; // WISHBONE acknowledge output`
204
205	39	mohor	`// WISHBONE master`
206			`output [31:0] m_wb_adr_o; //`
207			`output [3:0] m_wb_sel_o; //`
208			`output m_wb_we_o; //`
209			`output [31:0] m_wb_dat_o; //`
210			`output m_wb_cyc_o; //`
211			`output m_wb_stb_o; //`
212			`input [31:0] m_wb_dat_i; //`
213			`input m_wb_ack_i; //`
214			`input m_wb_err_i; //`
215
216	40	mohor	`input Reset; // Reset signal`
217	39	mohor
218	60	mohor	`// Rx Status signals`
219	42	mohor	`input InvalidSymbol; // Invalid symbol was received during reception in 100 Mbps mode`
220			`input LatchedCrcError; // CRC error`
221			`input RxLateCollision; // Late collision occured while receiving frame`
222			`input ShortFrame; // Frame shorter then the minimum size (r_MinFL) was received while small packets are enabled (r_RecSmall)`
223			`input DribbleNibble; // Extra nibble received`
224			`input ReceivedPacketTooBig;// Received packet is bigger than r_MaxFL`
225			`input [15:0] RxLength; // Length of the incoming frame`
226			`input LoadRxStatus; // Rx status was loaded`
227	77	mohor	`input ReceivedPacketGood;// Received packet's length and CRC are good`
228	39	mohor
229	60	mohor	`// Tx Status signals`
230			`input [3:0] RetryCntLatched; // Latched Retry Counter`
231			`input RetryLimit; // Retry limit reached (Retry Max value + 1 attempts were made)`
232			`input LateCollLatched; // Late collision occured`
233			`input DeferLatched; // Defer indication (Frame was defered before sucessfully sent)`
234			`input CarrierSenseLost; // Carrier Sense was lost during the frame transmission`
235
236	38	mohor	`// Tx`
237			`input MTxClk; // Transmit clock (from PHY)`
238			`input TxUsedData; // Transmit packet used data`
239			`input TxRetry; // Transmit packet retry`
240			`input TxAbort; // Transmit packet abort`
241			`input TxDone; // Transmission ended`
242			`output TxStartFrm; // Transmit packet start frame`
243			`output TxEndFrm; // Transmit packet end frame`
244			`output [7:0] TxData; // Transmit packet data byte`
245			`output TxUnderRun; // Transmit packet under-run`
246			`output PerPacketCrcEn; // Per packet crc enable`
247			`output PerPacketPad; // Per packet pading`
248			`output TPauseRq; // Tx PAUSE control frame`
249			`output [15:0] TxPauseTV; // PAUSE timer value`
250			`input WillSendControlFrame;`
251			`input TxCtrlEndFrm;`
252
253			`// Rx`
254			`input MRxClk; // Receive clock (from PHY)`
255			`input [7:0] RxData; // Received data byte (from PHY)`
256			`input RxValid; //`
257			`input RxStartFrm; //`
258			`input RxEndFrm; //`
259	40	mohor	`input RxAbort; // This signal is set when address doesn't match.`
260	38	mohor
261			`//Register`
262			`input r_TxEn; // Transmit enable`
263			`input r_RxEn; // Receive enable`
264			`input [7:0] r_TxBDNum; // Receive buffer descriptor number`
265			`input TX_BD_NUM_Wr; // RxBDNumber written`
266	42	mohor	`input r_RecSmall; // Receive small frames igor !!! tega uporabi`
267	38	mohor
268			`// Interrupts`
269			`output TxB_IRQ;`
270			`output TxE_IRQ;`
271			`output RxB_IRQ;`
272	77	mohor	`output RxE_IRQ;`
273	38	mohor	`output Busy_IRQ;`
274	77	mohor	`output TxC_IRQ;`
275			`output RxC_IRQ;`
276	38	mohor
277	77	mohor
278			`reg TxB_IRQ;`
279			`reg TxE_IRQ;`
280			`reg RxB_IRQ;`
281			`reg RxE_IRQ;`
282
283
284	38	mohor	`reg TxStartFrm;`
285			`reg TxEndFrm;`
286			`reg [7:0] TxData;`
287
288			`reg TxUnderRun;`
289	60	mohor	`reg TxUnderRun_wb;`
290	38	mohor
291			`reg TxBDRead;`
292	39	mohor	`wire TxStatusWrite;`
293	38	mohor
294			`reg [1:0] TxValidBytesLatched;`
295
296			`reg [15:0] TxLength;`
297	60	mohor	`reg [15:0] LatchedTxLength;`
298			`reg [14:11] TxStatus;`
299	38	mohor
300	60	mohor	`reg [14:13] RxStatus;`
301	38	mohor
302			`reg TxStartFrm_wb;`
303			`reg TxRetry_wb;`
304	39	mohor	`reg TxAbort_wb;`
305	38	mohor	`reg TxDone_wb;`
306
307			`reg TxDone_wb_q;`
308			`reg TxAbort_wb_q;`
309	39	mohor	`reg TxRetry_wb_q;`
310	105	mohor	`reg TxDone_wb_q2;`
311			`reg TxAbort_wb_q2;`
312			`reg TxRetry_wb_q2;`
313	38	mohor	`reg RxBDReady;`
314			`reg TxBDReady;`
315
316			`reg RxBDRead;`
317	40	mohor	`wire RxStatusWrite;`
318	38	mohor
319			`reg [31:0] TxDataLatched;`
320			`reg [1:0] TxByteCnt;`
321			`reg LastWord;`
322	39	mohor	`reg ReadTxDataFromFifo_tck;`
323	38	mohor
324			`reg BlockingTxStatusWrite;`
325			`reg BlockingTxBDRead;`
326
327	40	mohor	`reg Flop;`
328	38	mohor
329			`reg [7:0] TxBDAddress;`
330			`reg [7:0] RxBDAddress;`
331
332			`reg TxRetrySync1;`
333			`reg TxAbortSync1;`
334	39	mohor	`reg TxDoneSync1;`
335	38	mohor
336			`reg TxAbort_q;`
337			`reg TxRetry_q;`
338			`reg TxUsedData_q;`
339
340			`reg [31:0] RxDataLatched2;`
341	82	mohor
342			`// reg [23:0] RxDataLatched1;`
343			`reg [31:8] RxDataLatched1; // Big Endian Byte Ordering`
344
345	38	mohor	`reg [1:0] RxValidBytes;`
346			`reg [1:0] RxByteCnt;`
347			`reg LastByteIn;`
348			`reg ShiftWillEnd;`
349
350	40	mohor	`reg WriteRxDataToFifo;`
351	42	mohor	`reg [15:0] LatchedRxLength;`
352	64	mohor	`reg RxAbortLatched;`
353	38	mohor
354	40	mohor	`reg ShiftEnded;`
355	60	mohor	`reg RxOverrun;`
356	38	mohor
357	40	mohor	`reg BDWrite; // BD Write Enable for access from WISHBONE side`
358			`reg BDRead; // BD Read access from WISHBONE side`
359	39	mohor	`wire [31:0] RxBDDataIn; // Rx BD data in`
360			`wire [31:0] TxBDDataIn; // Tx BD data in`
361	38	mohor
362	39	mohor	`reg TxEndFrm_wb;`
363	38	mohor
364	39	mohor	`wire TxRetryPulse;`
365	38	mohor	`wire TxDonePulse;`
366			`wire TxAbortPulse;`
367	105	mohor	`wire TxRetryPulse_q;`
368			`wire TxDonePulse_q;`
369			`wire TxAbortPulse_q;`
370	38	mohor
371			`wire StartRxBDRead;`
372
373			`wire StartTxBDRead;`
374
375			`wire TxIRQEn;`
376			`wire WrapTxStatusBit;`
377
378	77	mohor	`wire RxIRQEn;`
379	38	mohor	`wire WrapRxStatusBit;`
380
381			`wire [1:0] TxValidBytes;`
382
383			`wire [7:0] TempTxBDAddress;`
384			`wire [7:0] TempRxBDAddress;`
385
386			`wire SetGotData;`
387			`wire GotDataEvaluate;`
388
389	106	mohor	`reg WB_ACK_O;`
390	38	mohor
391	60	mohor	`wire [6:0] RxStatusIn;`
392			`reg [6:0] RxStatusInLatched;`
393	42	mohor
394	39	mohor	`reg WbEn, WbEn_q;`
395			`reg RxEn, RxEn_q;`
396			`reg TxEn, TxEn_q;`
397	38	mohor
398	39	mohor	`wire ram_ce;`
399			`wire ram_we;`
400			`wire ram_oe;`
401			`reg [7:0] ram_addr;`
402			`reg [31:0] ram_di;`
403			`wire [31:0] ram_do;`
404	38	mohor
405	39	mohor	`wire StartTxPointerRead;`
406			`reg TxPointerRead;`
407			`reg TxEn_needed;`
408	40	mohor	`reg RxEn_needed;`
409	38	mohor
410	40	mohor	`wire StartRxPointerRead;`
411			`reg RxPointerRead;`
412	38	mohor
413	39	mohor
414	40	mohor	`always @ (posedge WB_CLK_I or posedge Reset)`
415			`begin`
416			`if(Reset)`
417			`begin`
418	106	mohor	`WB_ACK_O <=#Tp 1'b0;`
419	40	mohor	`end`
420			`else`
421			`begin`
422	106	mohor	`WB_ACK_O <=#Tp BDWrite & WbEn & WbEn_q \| BDRead & WbEn & ~WbEn_q;`
423	40	mohor	`end`
424			`end`
425	39	mohor
426	106	mohor	`assign WB_DAT_O = ram_do;`
427	39	mohor
428	41	mohor	`// Generic synchronous single-port RAM interface`
429	39	mohor	`generic_spram #(8, 32) ram (`
430			`// Generic synchronous single-port RAM interface`
431	40	mohor	`.clk(WB_CLK_I), .rst(Reset), .ce(ram_ce), .we(ram_we), .oe(ram_oe), .addr(ram_addr), .di(ram_di), .do(ram_do)`
432	39	mohor	`);`
433	41	mohor
434	39	mohor	`assign ram_ce = 1'b1;`
435	40	mohor	`assign ram_we = BDWrite & WbEn & WbEn_q \| TxStatusWrite \| RxStatusWrite;`
436	61	mohor	`assign ram_oe = BDRead & WbEn & WbEn_q \| TxEn & TxEn_q & (TxBDRead \| TxPointerRead) \| RxEn & RxEn_q & (RxBDRead \| RxPointerRead);`
437	39	mohor
438
439	40	mohor	`always @ (posedge WB_CLK_I or posedge Reset)`
440	38	mohor	`begin`
441	40	mohor	`if(Reset)`
442	39	mohor	`TxEn_needed <=#Tp 1'b0;`
443	38	mohor	`else`
444	40	mohor	`if(~TxBDReady & r_TxEn & WbEn & ~WbEn_q)`
445	39	mohor	`TxEn_needed <=#Tp 1'b1;`
446			`else`
447			`if(TxPointerRead & TxEn & TxEn_q)`
448			`TxEn_needed <=#Tp 1'b0;`
449	38	mohor	`end`
450
451	39	mohor	`// Enabling access to the RAM for three devices.`
452	40	mohor	`always @ (posedge WB_CLK_I or posedge Reset)`
453	39	mohor	`begin`
454	40	mohor	`if(Reset)`
455	39	mohor	`begin`
456			`WbEn <=#Tp 1'b1;`
457			`RxEn <=#Tp 1'b0;`
458			`TxEn <=#Tp 1'b0;`
459			`ram_addr <=#Tp 8'h0;`
460			`ram_di <=#Tp 32'h0;`
461	77	mohor	`BDRead <=#Tp 1'b0;`
462			`BDWrite <=#Tp 1'b0;`
463	39	mohor	`end`
464			`else`
465			`begin`
466			`// Switching between three stages depends on enable signals`
467	90	mohor	`case ({WbEn_q, RxEn_q, TxEn_q, RxEn_needed, TxEn_needed}) // synopsys parallel_case`
468			`5'b100_10, 5'b100_11 :`
469	39	mohor	`begin`
470			`WbEn <=#Tp 1'b0;`
471			`RxEn <=#Tp 1'b1; // wb access stage and r_RxEn is enabled`
472			`TxEn <=#Tp 1'b0;`
473	40	mohor	`ram_addr <=#Tp RxBDAddress + RxPointerRead;`
474	39	mohor	`ram_di <=#Tp RxBDDataIn;`
475			`end`
476			`5'b100_01 :`
477			`begin`
478			`WbEn <=#Tp 1'b0;`
479			`RxEn <=#Tp 1'b0;`
480			`TxEn <=#Tp 1'b1; // wb access stage, r_RxEn is disabled but r_TxEn is enabled`
481			`ram_addr <=#Tp TxBDAddress + TxPointerRead;`
482			`ram_di <=#Tp TxBDDataIn;`
483			`end`
484	90	mohor	`5'b010_00, 5'b010_10 :`
485	39	mohor	`begin`
486			`WbEn <=#Tp 1'b1; // RxEn access stage and r_TxEn is disabled`
487			`RxEn <=#Tp 1'b0;`
488			`TxEn <=#Tp 1'b0;`
489			`ram_addr <=#Tp WB_ADR_I[9:2];`
490			`ram_di <=#Tp WB_DAT_I;`
491	40	mohor	`BDWrite <=#Tp BDCs & WB_WE_I;`
492			`BDRead <=#Tp BDCs & ~WB_WE_I;`
493	39	mohor	`end`
494	90	mohor	`5'b010_01, 5'b010_11 :`
495	39	mohor	`begin`
496			`WbEn <=#Tp 1'b0;`
497			`RxEn <=#Tp 1'b0;`
498			`TxEn <=#Tp 1'b1; // RxEn access stage and r_TxEn is enabled`
499			`ram_addr <=#Tp TxBDAddress + TxPointerRead;`
500			`ram_di <=#Tp TxBDDataIn;`

Browse

Tools

Subversion Repositories ethmac

[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_wishbone.v] - Blame information for rev 118