URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_wishbone.v] - Blame information for rev 54

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  eth_wishbone.v                                              ////
////                                                              ////
////  This file is part of the Ethernet IP core project           ////
////  http://www.opencores.org/projects/ethmac/                   ////
////                                                              ////
////  Author(s):                                                  ////
////      - Igor Mohor (igorM@opencores.org)                      ////
////                                                              ////
////  All additional information is avaliable in the Readme.txt   ////
////  file.                                                       ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2001 Authors                                   ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.5  2002/02/08 16:21:54  mohor
// Rx status is written back to the BD.
//
// Revision 1.4  2002/02/06 14:10:21  mohor
// non-DMA host interface added. Select the right configutation in eth_defines.
//
// Revision 1.3  2002/02/05 16:44:39  mohor
// Both rx and tx part are finished. Tested with wb_clk_i between 10 and 200
// MHz. Statuses, overrun, control frame transmission and reception still  need
// to be fixed.
//
// Revision 1.2  2002/02/01 12:46:51  mohor
// Tx part finished. TxStatus needs to be fixed. Pause request needs to be
// added.
//
// Revision 1.1  2002/01/23 10:47:59  mohor
// Initial version. Equals to eth_wishbonedma.v at this moment.
//
//
//
//
 
// igor !!!
// Napravi, pause frame
 
// Poskusi spremeniti vse signale na wb strani da bodo imeli enake koncnice (npr _wb),
// vsi na MTxClk strani pa _txclk   
// Evaluiraj dato da pre start framom ni prisel abort ali kaj podobnega (kot je bilo v GotData, ki ga zbrisi)
 
// Naj m_wb_err_i vzge status underrun ali uverrun
 
`include "eth_defines.v"
`include "timescale.v"
 
 
module eth_wishbone
   (
 
    // WISHBONE common
    WB_CLK_I, WB_DAT_I, WB_DAT_O,
 
    // WISHBONE slave
                WB_ADR_I, WB_SEL_I, WB_WE_I, WB_ACK_O,
    BDCs,
 
    Reset,
 
    // WISHBONE master
    m_wb_adr_o, m_wb_sel_o, m_wb_we_o,
    m_wb_dat_o, m_wb_dat_i, m_wb_cyc_o,
    m_wb_stb_o, m_wb_ack_i, m_wb_err_i,
 
    //TX
    MTxClk, TxStartFrm, TxEndFrm, TxUsedData, TxData, StatusIzTxEthMACModula,
    TxRetry, TxAbort, TxUnderRun, TxDone, TPauseRq, TxPauseTV, PerPacketCrcEn,
    PerPacketPad,
 
    //RX
    MRxClk, RxData, RxValid, RxStartFrm, RxEndFrm, RxAbort,
 
    // Register
    r_TxEn, r_RxEn, r_TxBDNum, r_DmaEn, TX_BD_NUM_Wr, r_RecSmall,
 
    WillSendControlFrame, TxCtrlEndFrm, // igor !!! WillSendControlFrame gre najbrz ven
 
    // Interrupts
    TxB_IRQ, TxE_IRQ, RxB_IRQ, RxF_IRQ, Busy_IRQ,
 
    InvalidSymbol, LatchedCrcError, RxLateCollision, ShortFrame, DribbleNibble,
    ReceivedPacketTooBig, RxLength, LoadRxStatus
 
                );
 
 
parameter Tp = 1;
 
// WISHBONE common
input           WB_CLK_I;       // WISHBONE clock
input  [31:0]   WB_DAT_I;       // WISHBONE data input
output [31:0]   WB_DAT_O;       // WISHBONE data output
 
// WISHBONE slave
input   [9:2]   WB_ADR_I;       // WISHBONE address input
input   [3:0]   WB_SEL_I;       // WISHBONE byte select input
input           WB_WE_I;        // WISHBONE write enable input
input           BDCs;           // Buffer descriptors are selected
output          WB_ACK_O;       // WISHBONE acknowledge output
 
// WISHBONE master
output  [31:0]  m_wb_adr_o;     // 
output   [3:0]  m_wb_sel_o;     // 
output          m_wb_we_o;      // 
output  [31:0]  m_wb_dat_o;     // 
output          m_wb_cyc_o;     // 
output          m_wb_stb_o;     // 
input   [31:0]  m_wb_dat_i;     // 
input           m_wb_ack_i;     // 
input           m_wb_err_i;     // 
 
input           Reset;       // Reset signal
 
// Status signals
input           InvalidSymbol;    // Invalid symbol was received during reception in 100 Mbps mode
input           LatchedCrcError;  // CRC error
input           RxLateCollision;  // Late collision occured while receiving frame
input           ShortFrame;       // Frame shorter then the minimum size (r_MinFL) was received while small packets are enabled (r_RecSmall)
input           DribbleNibble;    // Extra nibble received
input           ReceivedPacketTooBig;// Received packet is bigger than r_MaxFL
input    [15:0] RxLength;         // Length of the incoming frame
input           LoadRxStatus;     // Rx status was loaded
 
// Tx
input           MTxClk;         // Transmit clock (from PHY)
input           TxUsedData;     // Transmit packet used data
input  [15:0]   StatusIzTxEthMACModula;
input           TxRetry;        // Transmit packet retry
input           TxAbort;        // Transmit packet abort
input           TxDone;         // Transmission ended
output          TxStartFrm;     // Transmit packet start frame
output          TxEndFrm;       // Transmit packet end frame
output  [7:0]   TxData;         // Transmit packet data byte
output          TxUnderRun;     // Transmit packet under-run
output          PerPacketCrcEn; // Per packet crc enable
output          PerPacketPad;   // Per packet pading
output          TPauseRq;       // Tx PAUSE control frame
output [15:0]   TxPauseTV;      // PAUSE timer value
input           WillSendControlFrame;
input           TxCtrlEndFrm;
 
// Rx
input           MRxClk;         // Receive clock (from PHY)
input   [7:0]   RxData;         // Received data byte (from PHY)
input           RxValid;        // 
input           RxStartFrm;     // 
input           RxEndFrm;       // 
input           RxAbort;        // This signal is set when address doesn't match.
 
//Register
input           r_TxEn;         // Transmit enable
input           r_RxEn;         // Receive enable
input   [7:0]   r_TxBDNum;      // Receive buffer descriptor number
input           r_DmaEn;        // DMA enable
input           TX_BD_NUM_Wr;   // RxBDNumber written
input           r_RecSmall;     // Receive small frames igor !!! tega uporabi
 
// Interrupts
output TxB_IRQ;
output TxE_IRQ;
output RxB_IRQ;
output RxF_IRQ;
output Busy_IRQ;
 
reg             TxStartFrm;
reg             TxEndFrm;
reg     [7:0]   TxData;
 
reg             TxUnderRun;
 
reg             TxBDRead;
wire            TxStatusWrite;
 
reg     [1:0]   TxValidBytesLatched;
 
reg    [15:0]   TxLength;
reg    [15:0]   TxStatus;
 
reg   [14:13]   RxStatusOld;
 
reg             TxStartFrm_wb;
reg             TxRetry_wb;
reg             TxAbort_wb;
reg             TxDone_wb;
 
reg             TxDone_wb_q;
reg             TxAbort_wb_q;
reg             TxRetry_wb_q;
reg             RxBDReady;
reg             TxBDReady;
 
reg             RxBDRead;
wire            RxStatusWrite;
 
reg    [31:0]   TxDataLatched;
reg     [1:0]   TxByteCnt;
reg             LastWord;
reg             ReadTxDataFromFifo_tck;
 
reg             BlockingTxStatusWrite;
reg             BlockingTxBDRead;
 
reg             Flop;
 
reg     [7:0]   TxBDAddress;
reg     [7:0]   RxBDAddress;
 
reg             TxRetrySync1;
reg             TxAbortSync1;
reg             TxDoneSync1;
 
reg             TxAbort_q;
reg             TxRetry_q;
reg             TxUsedData_q;
 
reg    [31:0]   RxDataLatched2;
reg    [23:0]   RxDataLatched1;
reg     [1:0]   RxValidBytes;
reg     [1:0]   RxByteCnt;
reg             LastByteIn;
reg             ShiftWillEnd;
 
reg             WriteRxDataToFifo;
reg    [15:0]   LatchedRxLength;
 
reg             ShiftEnded;
 
reg             BDWrite;                    // BD Write Enable for access from WISHBONE side
reg             BDRead;                     // BD Read access from WISHBONE side
wire   [31:0]   RxBDDataIn;                 // Rx BD data in
wire   [31:0]   TxBDDataIn;                 // Tx BD data in
 
reg             TxEndFrm_wb;
 
wire            TxRetryPulse;
wire            TxDonePulse;
wire            TxAbortPulse;
 
wire            StartRxBDRead;
wire            StartRxStatusWrite;
 
wire            StartTxBDRead;
 
wire            TxIRQEn;
wire            WrapTxStatusBit;
 
wire            WrapRxStatusBit;
 
wire    [1:0]   TxValidBytes;
 
wire    [7:0]   TempTxBDAddress;
wire    [7:0]   TempRxBDAddress;
 
wire            SetGotData;
wire            GotDataEvaluate;
 
reg             temp_ack;
 
wire    [5:0]   RxStatusIn;
reg     [5:0]   RxStatusInLatched;
 
`ifdef ETH_REGISTERED_OUTPUTS
reg             temp_ack2;
reg [31:0]      registered_ram_do;
`endif
 
reg WbEn, WbEn_q;
reg RxEn, RxEn_q;
reg TxEn, TxEn_q;
 
wire ram_ce;
wire ram_we;
wire ram_oe;
reg [7:0]   ram_addr;
reg [31:0]  ram_di;
wire [31:0] ram_do;
 
wire StartTxPointerRead;
wire ResetTxPointerRead;
reg  TxPointerRead;
reg TxEn_needed;
reg RxEn_needed;
 
wire StartRxPointerRead;
reg RxPointerRead;
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      temp_ack <=#Tp 1'b0;
      `ifdef ETH_REGISTERED_OUTPUTS
      temp_ack2 <=#Tp 1'b0;
      registered_ram_do <=#Tp 32'h0;
      `endif
    end
  else
    begin
      temp_ack <=#Tp BDWrite & WbEn & WbEn_q | BDRead & WbEn & ~WbEn_q;
      `ifdef ETH_REGISTERED_OUTPUTS
      temp_ack2 <=#Tp temp_ack;
      registered_ram_do <=#Tp ram_do;
      `endif
    end
end
 
`ifdef ETH_REGISTERED_OUTPUTS
  assign WB_ACK_O = temp_ack2;
  assign WB_DAT_O = registered_ram_do;
`else
  assign WB_ACK_O = temp_ack;
  assign WB_DAT_O = ram_do;
`endif
 
 
// Generic synchronous single-port RAM interface
generic_spram #(8, 32) ram (
        // Generic synchronous single-port RAM interface
        .clk(WB_CLK_I), .rst(Reset), .ce(ram_ce), .we(ram_we), .oe(ram_oe), .addr(ram_addr), .di(ram_di), .do(ram_do)
);
 
assign ram_ce = 1'b1;
assign ram_we = BDWrite & WbEn & WbEn_q | TxStatusWrite | RxStatusWrite;
assign ram_oe = BDRead & WbEn & WbEn_q | TxEn & TxEn_q & (TxBDRead | TxPointerRead) | RxEn & RxEn_q & (RxBDRead | RxPointerRead);     // Tu manjka se read kadar se bere RxBD
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxEn_needed <=#Tp 1'b0;
  else
  if(~TxBDReady & r_TxEn & WbEn & ~WbEn_q)
    TxEn_needed <=#Tp 1'b1;
  else
  if(TxPointerRead & TxEn & TxEn_q)
    TxEn_needed <=#Tp 1'b0;
end
 
 
// Enabling access to the RAM for three devices.
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      WbEn <=#Tp 1'b1;
      RxEn <=#Tp 1'b0;
      TxEn <=#Tp 1'b0;
      ram_addr <=#Tp 8'h0;
      ram_di <=#Tp 32'h0;
    end
  else
    begin
      // Switching between three stages depends on enable signals
      casex ({WbEn_q, RxEn_q, TxEn_q, RxEn_needed, TxEn_needed})  // synopsys parallel_case
        5'b100_1x :
          begin
            WbEn <=#Tp 1'b0;
            RxEn <=#Tp 1'b1;  // wb access stage and r_RxEn is enabled
            TxEn <=#Tp 1'b0;
            ram_addr <=#Tp RxBDAddress + RxPointerRead;
            ram_di <=#Tp RxBDDataIn;
          end
        5'b100_01 :
          begin
            WbEn <=#Tp 1'b0;
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b1;  // wb access stage, r_RxEn is disabled but r_TxEn is enabled
            ram_addr <=#Tp TxBDAddress + TxPointerRead;
            ram_di <=#Tp TxBDDataIn;
          end
        5'b010_x0 :
          begin
            WbEn <=#Tp 1'b1;  // RxEn access stage and r_TxEn is disabled
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b0;
            ram_addr <=#Tp WB_ADR_I[9:2];
            ram_di <=#Tp WB_DAT_I;
            BDWrite <=#Tp BDCs & WB_WE_I;
            BDRead <=#Tp BDCs & ~WB_WE_I;
          end
        5'b010_x1 :
          begin
            WbEn <=#Tp 1'b0;
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b1;  // RxEn access stage and r_TxEn is enabled
            ram_addr <=#Tp TxBDAddress + TxPointerRead;
            ram_di <=#Tp TxBDDataIn;
          end
        5'b001_xx :
          begin
            WbEn <=#Tp 1'b1;  // TxEn access stage (we always go to wb access stage)
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b0;
            ram_addr <=#Tp WB_ADR_I[9:2];
            ram_di <=#Tp WB_DAT_I;
            BDWrite <=#Tp BDCs & WB_WE_I;
            BDRead <=#Tp BDCs & ~WB_WE_I;
          end
        5'b100_00 :
          begin
            WbEn <=#Tp 1'b0;  // WbEn access stage and there is no need for other stages. WbEn needs to be switched off for a bit
          end
        5'b000_00 :
          begin
            WbEn <=#Tp 1'b1;  // Idle state. We go to WbEn access stage.
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b0;
            ram_addr <=#Tp WB_ADR_I[9:2];
            ram_di <=#Tp WB_DAT_I;
            BDWrite <=#Tp BDCs & WB_WE_I;
            BDRead <=#Tp BDCs & ~WB_WE_I;
          end
        default :
          begin
            WbEn <=#Tp 1'b1;  // We go to wb access stage
            RxEn <=#Tp 1'b0;
            TxEn <=#Tp 1'b0;
            ram_addr <=#Tp WB_ADR_I[9:2];
            ram_di <=#Tp WB_DAT_I;
            BDWrite <=#Tp BDCs & WB_WE_I;
            BDRead <=#Tp BDCs & ~WB_WE_I;
          end
      endcase
    end
end
 
 
// Delayed stage signals
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      WbEn_q <=#Tp 1'b0;
      RxEn_q <=#Tp 1'b0;
      TxEn_q <=#Tp 1'b0;
    end
  else
    begin
      WbEn_q <=#Tp WbEn;
      RxEn_q <=#Tp RxEn;
      TxEn_q <=#Tp TxEn;
    end
end
 
// Changes for tx occur every second clock. Flop is used for this manner.
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    Flop <=#Tp 1'b0;
  else
  if(TxDone | TxAbort | TxRetry_q)
    Flop <=#Tp 1'b0;
  else
  if(TxUsedData)
    Flop <=#Tp ~Flop;
end
 
wire ResetTxBDReady;
assign ResetTxBDReady = TxDonePulse | TxAbortPulse | TxRetryPulse;
 
// Latching READY status of the Tx buffer descriptor
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxBDReady <=#Tp 1'b0;
  else
  if(TxEn & TxEn_q & TxBDRead)
    TxBDReady <=#Tp ram_do[15] & (ram_do[31:16] > 4); // TxBDReady is sampled only once at the beginning.
  else                                                // Only packets larger then 4 bytes are transmitted.
  if(ResetTxBDReady)
    TxBDReady <=#Tp 1'b0;
end
 
 
// Reading the Tx buffer descriptor
assign StartTxBDRead = (TxRetry_wb | TxStatusWrite) & ~BlockingTxBDRead;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxBDRead <=#Tp 1'b1;
  else
  if(StartTxBDRead)
    TxBDRead <=#Tp 1'b1;
  else
  if(TxBDReady)
    TxBDRead <=#Tp 1'b0;
end
 
 
// Reading Tx BD pointer
assign StartTxPointerRead = TxBDRead & TxBDReady;
 
// Reading Tx BD Pointer
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxPointerRead <=#Tp 1'b0;
  else
  if(StartTxPointerRead)
    TxPointerRead <=#Tp 1'b1;
  else
  if(TxEn_q)
    TxPointerRead <=#Tp 1'b0;
end
 
 
// Writing status back to the Tx buffer descriptor
assign TxStatusWrite = (TxDone_wb | TxAbort_wb) & TxEn & TxEn_q & ~BlockingTxStatusWrite;
 
 
 
// Status writing must occur only once. Meanwhile it is blocked.
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    BlockingTxStatusWrite <=#Tp 1'b0;
  else
  if(TxStatusWrite)
    BlockingTxStatusWrite <=#Tp 1'b1;
  else
  if(~TxDone_wb & ~TxAbort_wb)
    BlockingTxStatusWrite <=#Tp 1'b0;
end
 
 
// TxBDRead state is activated only once. 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    BlockingTxBDRead <=#Tp 1'b0;
  else
  if(StartTxBDRead)
    BlockingTxBDRead <=#Tp 1'b1;
  else
  if(TxStartFrm_wb)
    BlockingTxBDRead <=#Tp 1'b0;
end
 
 
// Latching status from the tx buffer descriptor
// Data is avaliable one cycle after the access is started (at that time signal TxEn is not active)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxStatus <=#Tp 15'h0;
  else
  if(TxEn & TxEn_q & TxBDRead)
    TxStatus <=#Tp ram_do[15:0];
end
 
reg ReadTxDataFromMemory;
wire WriteRxDataToMemory;
 
reg MasterWbTX;
reg MasterWbRX;
 
reg [31:0] m_wb_adr_o;
reg        m_wb_cyc_o;
reg        m_wb_stb_o;
reg        m_wb_we_o;
 
wire TxLengthEq0;
wire TxLengthLt4;
 
 
//Latching length from the buffer descriptor;
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxLength <=#Tp 16'h0;
  else
  if(TxEn & TxEn_q & TxBDRead)
    TxLength <=#Tp ram_do[31:16];
  else
  if(MasterWbTX & m_wb_ack_i)
    begin
      if(TxLengthLt4)
        TxLength <=#Tp 16'h0;
      else
        TxLength <=#Tp TxLength - 3'h4;    // Length is subtracted at the data request
    end
end
 
assign TxLengthEq0 = TxLength == 0;
assign TxLengthLt4 = TxLength < 4;
 
 
reg BlockingIncrementTxPointer;
 
reg [31:0] TxPointer;
reg [31:0] RxPointer;
 
//Latching Tx buffer pointer from buffer descriptor;
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxPointer <=#Tp 0;
  else
  if(TxEn & TxEn_q & TxPointerRead)
    TxPointer <=#Tp ram_do;
  else
  if(MasterWbTX & ~BlockingIncrementTxPointer)
    TxPointer <=#Tp TxPointer + 4;    // Pointer increment
end
 
wire MasterAccessFinished;
 
 
//Latching Tx buffer pointer from buffer descriptor;
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    BlockingIncrementTxPointer <=#Tp 0;
  else
  if(MasterAccessFinished)
    BlockingIncrementTxPointer <=#Tp 0;
  else
  if(MasterWbTX)
    BlockingIncrementTxPointer <=#Tp 1'b1;
end
 
 
wire TxBufferAlmostFull;
wire TxBufferFull;
wire TxBufferEmpty;
wire TxBufferAlmostEmpty;
wire ResetReadTxDataFromMemory;
wire SetReadTxDataFromMemory;
 
reg BlockReadTxDataFromMemory;
 
assign ResetReadTxDataFromMemory = (TxLengthEq0) | TxAbortPulse | TxRetryPulse;
assign SetReadTxDataFromMemory = TxEn & TxEn_q & TxPointerRead;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromMemory <=#Tp 1'b0;
  else
  if(ResetReadTxDataFromMemory)
    ReadTxDataFromMemory <=#Tp 1'b0;
  else
  if(SetReadTxDataFromMemory)
    ReadTxDataFromMemory <=#Tp 1'b1;
end
 
wire ReadTxDataFromMemory_2 = ReadTxDataFromMemory & ~BlockReadTxDataFromMemory;
wire [31:0] TxData_wb;
wire ReadTxDataFromFifo_wb;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    BlockReadTxDataFromMemory <=#Tp 1'b0;
  else
  if(ReadTxDataFromFifo_wb)
    BlockReadTxDataFromMemory <=#Tp 1'b0;
  else
  if((TxBufferAlmostFull | TxLength <= 4)& MasterWbTX)
    BlockReadTxDataFromMemory <=#Tp 1'b1;
end
 
 
 
assign MasterAccessFinished = m_wb_ack_i | m_wb_err_i;
 
assign m_wb_sel_o = 4'hf;
 
 
// Enabling master wishbone access to the memory for two devices TX and RX.
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      MasterWbTX <=#Tp 1'b0;
      MasterWbRX <=#Tp 1'b0;
      m_wb_adr_o <=#Tp 32'h0;
      m_wb_cyc_o <=#Tp 1'b0;
      m_wb_stb_o <=#Tp 1'b0;
      m_wb_we_o  <=#Tp 1'b0;
    end
  else
    begin
      // Switching between two stages depends on enable signals
      casex ({MasterWbTX, MasterWbRX, ReadTxDataFromMemory_2, WriteRxDataToMemory, MasterAccessFinished})  // synopsys parallel_case full_case
        5'b00_x1_x :
          begin
            MasterWbTX <=#Tp 1'b0;  // idle and master write is needed (data write to rx buffer)
            MasterWbRX <=#Tp 1'b1;
            m_wb_adr_o <=#Tp RxPointer;
            m_wb_cyc_o <=#Tp 1'b1;
            m_wb_stb_o <=#Tp 1'b1;
            m_wb_we_o  <=#Tp 1'b1;
          end
        5'b00_10_x :
          begin
            MasterWbTX <=#Tp 1'b1;  // idle and master read is needed (data read from tx buffer)
            MasterWbRX <=#Tp 1'b0;
            m_wb_adr_o <=#Tp TxPointer;
            m_wb_cyc_o <=#Tp 1'b1;
            m_wb_stb_o <=#Tp 1'b1;
            m_wb_we_o  <=#Tp 1'b0;
          end
        5'b10_10_1 :
          begin
            MasterWbTX <=#Tp 1'b1;  // master read and master read is needed (data read from tx buffer)
            MasterWbRX <=#Tp 1'b0;
            m_wb_adr_o <=#Tp TxPointer;
            m_wb_cyc_o <=#Tp 1'b1;
            m_wb_stb_o <=#Tp 1'b1;
            m_wb_we_o  <=#Tp 1'b0;
          end
        5'b01_01_1 :
          begin
            MasterWbTX <=#Tp 1'b0;  // master write and master write is needed (data write to rx buffer)
            MasterWbRX <=#Tp 1'b1;
            m_wb_adr_o <=#Tp RxPointer;
            m_wb_we_o  <=#Tp 1'b1;
          end
        5'b10_x1_1 :
          begin
            MasterWbTX <=#Tp 1'b0;  // master read and master write is needed (data write to rx buffer)
            MasterWbRX <=#Tp 1'b1;
            m_wb_adr_o <=#Tp RxPointer;
            m_wb_we_o  <=#Tp 1'b1;
          end
        5'b01_1x_1 :
          begin
            MasterWbTX <=#Tp 1'b1;  // master write and master read is needed (data read from tx buffer)
            MasterWbRX <=#Tp 1'b0;
            m_wb_adr_o <=#Tp TxPointer;
            m_wb_we_o  <=#Tp 1'b0;
          end
        5'bxx_00_1 :
          begin
            MasterWbTX <=#Tp 1'b0;  // whatever and no master read or write is needed (ack or err comes finishing previous access)
            MasterWbRX <=#Tp 1'b0;
            m_wb_cyc_o <=#Tp 1'b0;
            m_wb_stb_o <=#Tp 1'b0;
          end
      endcase
    end
end
 
wire TxFifoClear;
assign TxFifoClear = (TxAbort_wb | TxRetry_wb) & ~TxBDReady;
 
eth_fifo #(`TX_FIFO_DATA_WIDTH, `TX_FIFO_DEPTH, `TX_FIFO_CNT_WIDTH)
tx_fifo (.data_in(m_wb_dat_i),               .data_out(TxData_wb),            .clk(WB_CLK_I),
         .reset(Reset),                   .write(MasterWbTX & m_wb_ack_i), .read(ReadTxDataFromFifo_wb),
         .clear(TxFifoClear),                .full(TxBufferFull),             .almost_full(TxBufferAlmostFull),
         .almost_empty(TxBufferAlmostEmpty), .empty(TxBufferEmpty));
 
 
reg StartOccured;
reg TxStartFrm_sync1;
reg TxStartFrm_sync2;
reg TxStartFrm_syncb1;
reg TxStartFrm_syncb2;
 
 
 
// Start: Generation of the TxStartFrm_wb which is then synchronized to the MTxClk
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxStartFrm_wb <=#Tp 1'b0;
  else
  if(TxBDReady & ~StartOccured & (TxBufferFull | TxLengthEq0))
    TxStartFrm_wb <=#Tp 1'b1;
  else
  if(TxStartFrm_syncb2)
    TxStartFrm_wb <=#Tp 1'b0;
end
 
// StartOccured: TxStartFrm_wb occurs only ones at the beginning. Then it's blocked.
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    StartOccured <=#Tp 1'b0;
  else
  if(TxStartFrm_wb)
    StartOccured <=#Tp 1'b1;
  else
  if(ResetTxBDReady)
    StartOccured <=#Tp 1'b0;
end
 
// Synchronizing TxStartFrm_wb to MTxClk
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxStartFrm_sync1 <=#Tp 1'b0;
  else
    TxStartFrm_sync1 <=#Tp TxStartFrm_wb;
end
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxStartFrm_sync2 <=#Tp 1'b0;
  else
    TxStartFrm_sync2 <=#Tp TxStartFrm_sync1;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxStartFrm_syncb1 <=#Tp 1'b0;
  else
    TxStartFrm_syncb1 <=#Tp TxStartFrm_sync2;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxStartFrm_syncb2 <=#Tp 1'b0;
  else
    TxStartFrm_syncb2 <=#Tp TxStartFrm_syncb1;
end
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxStartFrm <=#Tp 1'b0;
  else
  if(TxStartFrm_sync2)
    TxStartFrm <=#Tp 1'b1;      // igor !!! Dodaj se pogoj, da ni vmes prisel kaksen abort ali kaj podobnega
  else
  if(TxUsedData_q)
    TxStartFrm <=#Tp 1'b0;
end
// End: Generation of the TxStartFrm_wb which is then synchronized to the MTxClk
 
 
// TxEndFrm_wb: indicator of the end of frame
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxEndFrm_wb <=#Tp 1'b0;
  else
  if(TxLengthLt4 & TxBufferAlmostEmpty & TxUsedData)
    TxEndFrm_wb <=#Tp 1'b1;
  else
  if(TxRetryPulse | TxDonePulse | TxAbortPulse)
    TxEndFrm_wb <=#Tp 1'b0;
end
 
 
// Marks which bytes are valid within the word.
assign TxValidBytes = TxLengthLt4 ? TxLength[1:0] : 2'b0;
 
reg LatchValidBytes;
reg LatchValidBytes_q;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    LatchValidBytes <=#Tp 1'b0;
  else
  if(TxLengthLt4 & TxBDReady)
    LatchValidBytes <=#Tp 1'b1;
  else
    LatchValidBytes <=#Tp 1'b0;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    LatchValidBytes_q <=#Tp 1'b0;
  else
    LatchValidBytes_q <=#Tp LatchValidBytes;
end
 
 
// Latching valid bytes
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxValidBytesLatched <=#Tp 2'h0;
  else
  if(LatchValidBytes & ~LatchValidBytes_q)
    TxValidBytesLatched <=#Tp TxValidBytes;
  else
  if(TxRetryPulse | TxDonePulse | TxAbortPulse)
    TxValidBytesLatched <=#Tp 2'h0;
end
 
 
// Bit 14 is used as a wrap bit. When active it indicates the last buffer descriptor in a row. After
// using this descriptor, first BD will be used again.
 
// TX
// bit 15 od tx je ready
// bit 14 od tx je interrupt (Tx buffer ali tx error bit se postavi v interrupt registru, ko se ta buffer odda)
// bit 13 od tx je wrap
// bit 12 od tx je pad
// bit 11 od tx je crc
// bit 10 od tx je last (crc se doda le ce je bit 11 in hkrati bit 10)
// bit 9  od tx je pause request (control frame)
    // Vsi zgornji biti gredo ven, spodnji biti (od 8 do 0) pa so statusni in se vpisejo po koncu oddajanja
// bit 8  od tx je defer indication
// bit 7  od tx je late collision
// bit 6  od tx je retransmittion limit
// bit 5  od tx je underrun
// bit 4  od tx je carrier sense lost
// bit [3:0] od tx je retry count
 
//assign TxBDReady      = TxStatus[15];     // already used
assign TxIRQEn          = TxStatus[14];
assign WrapTxStatusBit  = TxStatus[13];                                                   // ok povezan
assign PerPacketPad     = TxStatus[12];                                                   // ok povezan
assign PerPacketCrcEn   = TxStatus[11] & TxStatus[10];      // When last is also set      // ok povezan
//assign TxPauseRq      = TxStatus[9];      // already used     Ta gre ven, ker bo stvar izvedena preko registrov
 
 
 
// RX
// bit 15 od rx je empty
// bit 14 od rx je interrupt (Rx buffer ali rx frame received se postavi v interrupt registru, ko se ta buffer zapre)
// bit 13 od rx je wrap
// bit 12 od rx je reserved
// bit 11 od rx je reserved
// bit 10 od rx je last (crc se doda le ce je bit 11 in hkrati bit 10)
// bit 9  od rx je pause request (control frame)
    // Vsi zgornji biti gredo ven, spodnji biti (od 8 do 0) pa so statusni in se vpisejo po koncu oddajanja
// bit 8  od rx je defer indication
// bit 7  od rx je late collision
// bit 6  od rx je retransmittion limit
// bit 5  od rx je underrun
// bit 4  od rx je carrier sense lost
// bit [3:0] od rx je retry count
 
assign WrapRxStatusBit = RxStatusOld[13];
 
 
// Temporary Tx and Rx buffer descriptor address 
assign TempTxBDAddress[7:0] = {8{ TxStatusWrite     & ~WrapTxStatusBit}} & (TxBDAddress + 2'h2) ; // Tx BD increment or wrap (last BD)
assign TempRxBDAddress[7:0] = {8{ WrapRxStatusBit}} & (r_TxBDNum)       | // Using first Rx BD
                              {8{~WrapRxStatusBit}} & (RxBDAddress + 2'h2) ; // Using next Rx BD (incremenrement address)
 
 
// Latching Tx buffer descriptor address
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxBDAddress <=#Tp 8'h0;
  else
  if(TxStatusWrite)
    TxBDAddress <=#Tp TempTxBDAddress;
end
 
 
// Latching Rx buffer descriptor address
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxBDAddress <=#Tp 8'h0;
  else
  if(TX_BD_NUM_Wr)                        // When r_TxBDNum is updated, RxBDAddress is also igor !!! ta del bi se lahko popravil
    RxBDAddress <=#Tp WB_DAT_I[7:0];
  else
  if(RxStatusWrite)
    RxBDAddress <=#Tp TempRxBDAddress;
end
 
assign RxBDDataIn = {LatchedRxLength, 1'b0, RxStatusOld, 7'h0, RxStatusInLatched};  // tu dopolni, da se bo vpisoval status
assign TxBDDataIn = {32'h004380ef};   // tu dopolni, da se bo vpisoval status
 
 
// Signals used for various purposes
assign TxRetryPulse   = TxRetry_wb   & ~TxRetry_wb_q;
assign TxDonePulse    = TxDone_wb    & ~TxDone_wb_q;
assign TxAbortPulse   = TxAbort_wb   & ~TxAbort_wb_q;
 
 
// assign ClearTxBDReady = ~TxUsedData & TxUsedData_q;
 
assign TPauseRq = 0; // igor !!! v koncni fazi mora tu biti pause request
assign TxPauseTV[15:0] = TxLength[15:0]; // igor !!! v koncni fazi mora tu biti pause request
 
 
// Generating delayed signals
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    begin
      TxAbort_q      <=#Tp 1'b0;
      TxRetry_q      <=#Tp 1'b0;
      TxUsedData_q   <=#Tp 1'b0;
    end
  else
    begin
      TxAbort_q      <=#Tp TxAbort;
      TxRetry_q      <=#Tp TxRetry;
      TxUsedData_q   <=#Tp TxUsedData;
    end
end
 
// Generating delayed signals
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    begin
      TxDone_wb_q   <=#Tp 1'b0;
      TxAbort_wb_q  <=#Tp 1'b0;
      TxRetry_wb_q  <=#Tp 1'b0;
    end
  else
    begin
      TxDone_wb_q   <=#Tp TxDone_wb;
      TxAbort_wb_q  <=#Tp TxAbort_wb;
      TxRetry_wb_q  <=#Tp TxRetry_wb;
    end
end
 
 
// Sinchronizing and evaluating tx data
//assign SetGotData = (TxStartFrm_wb | NewTxDataAvaliable_wb & ~TxAbort_wb & ~TxRetry_wb) & ~WB_CLK_I;
assign SetGotData = (TxStartFrm_wb); // igor namesto zgornje
 
// Evaluating data. If abort or retry occured meanwhile than data is ignored.
//assign GotDataEvaluate = GotDataSync3 & ~GotData & (~TxRetry & ~TxAbort | (TxRetry | TxAbort) & (TxStartFrm));
assign GotDataEvaluate = (~TxRetry & ~TxAbort | (TxRetry | TxAbort) & (TxStartFrm));
 
 
// Indication of the last word
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    LastWord <=#Tp 1'b0;
  else
  if((TxEndFrm | TxAbort | TxRetry) & Flop)
    LastWord <=#Tp 1'b0;
  else
  if(TxUsedData & Flop & TxByteCnt == 2'h3)
    LastWord <=#Tp TxEndFrm_wb;
end
 
 
// Tx end frame generation
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxEndFrm <=#Tp 1'b0;
  else
  if(Flop & TxEndFrm | TxAbort | TxRetry_q)     // igor !!! zakaj je tu TxRetry_q ?
    TxEndFrm <=#Tp 1'b0;
  else
  if(Flop & LastWord)
    begin
      case (TxValidBytesLatched)
        1 : TxEndFrm <=#Tp TxByteCnt == 2'h0;
        2 : TxEndFrm <=#Tp TxByteCnt == 2'h1;
        3 : TxEndFrm <=#Tp TxByteCnt == 2'h2;
 
        default : TxEndFrm <=#Tp 1'b0;
      endcase
    end
end
 
 
// Tx data selection (latching)
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxData <=#Tp 8'h0;
  else
  if(TxStartFrm_sync2 & ~TxStartFrm)
    TxData <=#Tp TxData_wb[7:0];
  else
  if(TxUsedData & Flop)
    begin
      case(TxByteCnt)
 
        1 : TxData <=#Tp TxDataLatched[15:8];
        2 : TxData <=#Tp TxDataLatched[23:16];
        3 : TxData <=#Tp TxDataLatched[31:24];
      endcase
    end
end
 
 
// Latching tx data
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxDataLatched[31:0] <=#Tp 32'h0;
  else
  if(TxStartFrm_sync2 & ~TxStartFrm | TxUsedData & Flop & TxByteCnt == 2'h3)
    TxDataLatched[31:0] <=#Tp TxData_wb[31:0];
end
 
 
// Tx under run
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxUnderRun <=#Tp 1'b0;
  else
  if(TxAbortPulse)
    TxUnderRun <=#Tp 1'b0;
  else
  if(TxBufferEmpty & ReadTxDataFromFifo_wb)
    TxUnderRun <=#Tp 1'b1;
end
 
 
 
// Tx Byte counter
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    TxByteCnt <=#Tp 2'h0;
  else
  if(TxAbort_q | TxRetry_q)
    TxByteCnt <=#Tp 2'h0;
  else
  if(TxStartFrm & ~TxUsedData)
    TxByteCnt <=#Tp 2'h1;
  else
  if(TxUsedData & Flop)
    TxByteCnt <=#Tp TxByteCnt + 1;
end
 
 
// Start: Generation of the ReadTxDataFromFifo_tck signal and synchronization to the WB_CLK_I
reg ReadTxDataFromFifo_sync1;
reg ReadTxDataFromFifo_sync2;
reg ReadTxDataFromFifo_sync3;
reg ReadTxDataFromFifo_syncb1;
reg ReadTxDataFromFifo_syncb2;
 
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_tck <=#Tp 1'b0;
  else
  if(ReadTxDataFromFifo_syncb2)
    ReadTxDataFromFifo_tck <=#Tp 1'b0;
  else
  if(TxStartFrm_sync2 & ~TxStartFrm | TxUsedData & Flop & TxByteCnt == 2'h3 & ~LastWord)
     ReadTxDataFromFifo_tck <=#Tp 1'b1;
end
 
// Synchronizing TxStartFrm_wb to MTxClk
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_sync1 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_sync1 <=#Tp ReadTxDataFromFifo_tck;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_sync2 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_sync2 <=#Tp ReadTxDataFromFifo_sync1;
end
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_syncb1 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_syncb1 <=#Tp ReadTxDataFromFifo_sync2;
end
 
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_syncb2 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_syncb2 <=#Tp ReadTxDataFromFifo_syncb1;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ReadTxDataFromFifo_sync3 <=#Tp 1'b0;
  else
    ReadTxDataFromFifo_sync3 <=#Tp ReadTxDataFromFifo_sync2;
end
 
assign ReadTxDataFromFifo_wb = ReadTxDataFromFifo_sync2 & ~ReadTxDataFromFifo_sync3;
// End: Generation of the ReadTxDataFromFifo_tck signal and synchronization to the WB_CLK_I
 
 
// Synchronizing TxRetry signal (synchronized to WISHBONE clock)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxRetrySync1 <=#Tp 1'b0;
  else
    TxRetrySync1 <=#Tp TxRetry;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxRetry_wb <=#Tp 1'b0;
  else
    TxRetry_wb <=#Tp TxRetrySync1;
end
 
 
// Synchronized TxDone_wb signal (synchronized to WISHBONE clock)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxDoneSync1 <=#Tp 1'b0;
  else
    TxDoneSync1 <=#Tp TxDone;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxDone_wb <=#Tp 1'b0;
  else
    TxDone_wb <=#Tp TxDoneSync1;
end
 
// Synchronizing TxAbort signal (synchronized to WISHBONE clock)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxAbortSync1 <=#Tp 1'b0;
  else
    TxAbortSync1 <=#Tp TxAbort;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    TxAbort_wb <=#Tp 1'b0;
  else
    TxAbort_wb <=#Tp TxAbortSync1;
end
 
 
assign StartRxBDRead = RxStatusWrite | RxAbort;
 
// Reading the Rx buffer descriptor
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxBDRead <=#Tp 1'b1;
  else
  if(StartRxBDRead)
    RxBDRead <=#Tp 1'b1;
  else
  if(RxBDReady)
    RxBDRead <=#Tp 1'b0;
end
 
 
// Reading of the next receive buffer descriptor starts after reception status is
// written to the previous one.
 
// Latching READY status of the Rx buffer descriptor
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxBDReady <=#Tp 1'b0;
  else
  if(RxEn & RxEn_q & RxBDRead)
    RxBDReady <=#Tp ram_do[15]; // RxBDReady is sampled only once at the beginning
  else
  if(ShiftEnded | RxAbort)   // igor !!! tx del ima tu ResetTxBDReady
    RxBDReady <=#Tp 1'b0;
end
 
// Latching Rx buffer descriptor status
// Data is avaliable one cycle after the access is started (at that time signal RxEn is not active)
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxStatusOld <=#Tp 2'h0;
  else
  if(RxEn & RxEn_q & RxBDRead)
    RxStatusOld <=#Tp ram_do[14:13];
end
 
 
 
 
// Reading Rx BD pointer
 
 
assign StartRxPointerRead = RxBDRead & RxBDReady;
 
// Reading Tx BD Pointer
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxPointerRead <=#Tp 1'b0;
  else
  if(StartRxPointerRead)
    RxPointerRead <=#Tp 1'b1;
  else
  if(RxEn_q)
    RxPointerRead <=#Tp 1'b0;
end
 
reg BlockingIncrementRxPointer;
//Latching Rx buffer pointer from buffer descriptor;
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxPointer <=#Tp 32'h0;
  else
  if(RxEn & RxEn_q & RxPointerRead)
    RxPointer <=#Tp ram_do;
  else
  if(MasterWbRX & ~BlockingIncrementRxPointer)
    RxPointer <=#Tp RxPointer + 4;    // Pointer increment
end
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    BlockingIncrementRxPointer <=#Tp 0;
  else
  if(MasterAccessFinished)
    BlockingIncrementRxPointer <=#Tp 0;
  else
  if(MasterWbRX)
    BlockingIncrementRxPointer <=#Tp 1'b1;
end
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxEn_needed <=#Tp 1'b0;
  else
  if(~RxBDReady & r_RxEn & WbEn & ~WbEn_q)
    RxEn_needed <=#Tp 1'b1;
  else
  if(RxPointerRead & RxEn & RxEn_q)
    RxEn_needed <=#Tp 1'b0;
end
 
 
// Reception status is written back to the buffer descriptor after the end of frame is detected.
assign RxStatusWrite = ShiftEnded & RxEn & RxEn_q;
 
reg RxStatusWriteLatched;
reg RxStatusWrite_rck;
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxStatusWriteLatched <=#Tp 1'b0;
  else
  if(RxStatusWrite)
    RxStatusWriteLatched <=#Tp 1'b1;
  else
  if(RxStatusWrite_rck)
    RxStatusWriteLatched <=#Tp 1'b0;
end
 
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxStatusWrite_rck <=#Tp 1'b0;
  else
    RxStatusWrite_rck <=#Tp RxStatusWriteLatched;
end
 
 
reg RxEnableWindow;
 
// Indicating that last byte is being reveived
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    LastByteIn <=#Tp 1'b0;
  else
  if(ShiftWillEnd & (&RxByteCnt) | RxAbort)
    LastByteIn <=#Tp 1'b0;
  else
  if(RxValid & RxBDReady & RxEndFrm & ~(&RxByteCnt) & RxEnableWindow)
    LastByteIn <=#Tp 1'b1;
end
 
reg ShiftEnded_tck;
reg ShiftEndedSync1;
reg ShiftEndedSync2;
wire StartShiftWillEnd;
assign StartShiftWillEnd = LastByteIn & (&RxByteCnt) | RxValid & RxEndFrm & (&RxByteCnt) & RxEnableWindow;
 
// Indicating that data reception will end
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    ShiftWillEnd <=#Tp 1'b0;
  else
  if(ShiftEnded_tck | RxAbort)
    ShiftWillEnd <=#Tp 1'b0;
  else
  if(StartShiftWillEnd)
    ShiftWillEnd <=#Tp 1'b1;
end
 
 
 
// Receive byte counter
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxByteCnt <=#Tp 2'h0;
  else
  if(ShiftEnded_tck | RxAbort)
    RxByteCnt <=#Tp 2'h0;
  else
  if(RxValid & (RxStartFrm | RxEnableWindow) & RxBDReady | LastByteIn)
    RxByteCnt <=#Tp RxByteCnt + 1'b1;
end
 
 
// Indicates how many bytes are valid within the last word
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxValidBytes <=#Tp 2'h1;
  else
  if(ShiftEnded_tck | RxAbort)
    RxValidBytes <=#Tp 2'h1;
  else
  if(RxValid & ~LastByteIn & ~RxStartFrm & RxEnableWindow)
    RxValidBytes <=#Tp RxValidBytes + 1;
end
 
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxDataLatched1       <=#Tp 24'h0;
  else
  if(RxValid & RxBDReady & ~LastByteIn & (RxStartFrm | RxEnableWindow))
    begin
      case(RxByteCnt)     // synopsys parallel_case
        2'h0:        RxDataLatched1[7:0]   <=#Tp RxData;
        2'h1:        RxDataLatched1[15:8]  <=#Tp RxData;
        2'h2:        RxDataLatched1[23:16] <=#Tp RxData;
        2'h3:        RxDataLatched1        <=#Tp RxDataLatched1;
      endcase
    end
end
 
wire SetWriteRxDataToFifo;
 
// Assembling data that will be written to the rx_fifo
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxDataLatched2 <=#Tp 32'h0;
  else
  if(SetWriteRxDataToFifo & ~ShiftWillEnd)
    RxDataLatched2 <=#Tp {RxData, RxDataLatched1[23:0]};
  else
  if(SetWriteRxDataToFifo & ShiftWillEnd)
    case(RxValidBytes)
 
      1 : RxDataLatched2 <=#Tp { 24'h0, RxDataLatched1[7:0]};
      2 : RxDataLatched2 <=#Tp { 16'h0, RxDataLatched1[15:0]};
      3 : RxDataLatched2 <=#Tp {  8'h0, RxDataLatched1[23:0]};
    endcase
end
 
 
reg WriteRxDataToFifoSync1;
reg WriteRxDataToFifoSync2;
 
 
// Indicating start of the reception process
assign SetWriteRxDataToFifo = (RxValid & RxBDReady & ~RxStartFrm & RxEnableWindow & (&RxByteCnt)) | (ShiftWillEnd & LastByteIn & (&RxByteCnt));
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    WriteRxDataToFifo <=#Tp 1'b0;
  else
  if(SetWriteRxDataToFifo & ~RxAbort)
    WriteRxDataToFifo <=#Tp 1'b1;
  else
  if(WriteRxDataToFifoSync1 | RxAbort)
    WriteRxDataToFifo <=#Tp 1'b0;
end
 
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    WriteRxDataToFifoSync1 <=#Tp 1'b0;
  else
  if(WriteRxDataToFifo)
    WriteRxDataToFifoSync1 <=#Tp 1'b1;
  else
    WriteRxDataToFifoSync1 <=#Tp 1'b0;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    WriteRxDataToFifoSync2 <=#Tp 1'b0;
  else
    WriteRxDataToFifoSync2 <=#Tp WriteRxDataToFifoSync1;
end
 
wire WriteRxDataToFifo_wb;
assign WriteRxDataToFifo_wb = WriteRxDataToFifoSync1 & ~WriteRxDataToFifoSync2;
 
reg RxAbortSync1;
reg RxAbortSync2;
reg RxAbortSyncb1;
reg RxAbortSyncb2;
 
 
eth_fifo #(`RX_FIFO_DATA_WIDTH, `RX_FIFO_DEPTH, `RX_FIFO_CNT_WIDTH)
rx_fifo (.data_in(RxDataLatched2),        .data_out(m_wb_dat_o),        .clk(WB_CLK_I),
         .reset(Reset),                   .write(WriteRxDataToFifo_wb), .read(MasterWbRX & m_wb_ack_i),
         .clear(RxAbortSync2),            .full(RxBufferFull),          .almost_full(RxBufferAlmostFull),
         .almost_empty(RxBufferAlmostEmpty), .empty(RxBufferEmpty));
 
assign WriteRxDataToMemory = ~RxBufferEmpty & (~MasterWbRX | ~RxBufferAlmostEmpty);
 
 
 
// Generation of the end-of-frame signal
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    ShiftEnded_tck <=#Tp 1'b0;
  else
  if(SetWriteRxDataToFifo & StartShiftWillEnd & ~RxAbort)
    ShiftEnded_tck <=#Tp 1'b1;
  else
  if(ShiftEndedSync2 | RxAbort)
    ShiftEnded_tck <=#Tp 1'b0;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ShiftEndedSync1 <=#Tp 1'b0;
  else
    ShiftEndedSync1 <=#Tp ShiftEnded_tck;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ShiftEndedSync2 <=#Tp 1'b0;
  else
  if(ShiftEndedSync1)
    ShiftEndedSync2 <=#Tp 1'b1;
  else
  if(ShiftEnded)
    ShiftEndedSync2 <=#Tp 1'b0;
end
 
 
// Generation of the end-of-frame signal
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    ShiftEnded <=#Tp 1'b0;
  else
  if(ShiftEndedSync2 & MasterWbRX & m_wb_ack_i & RxBufferAlmostEmpty)
    ShiftEnded <=#Tp 1'b1;
  else
  if(RxStatusWrite)
    ShiftEnded <=#Tp 1'b0;
end
 
 
// Generation of the end-of-frame signal
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxEnableWindow <=#Tp 1'b0;
  else
  if(RxStartFrm)
    RxEnableWindow <=#Tp 1'b1;
  else
  if(RxEndFrm | RxAbort)
    RxEnableWindow <=#Tp 1'b0;
end
 
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxAbortSync1 <=#Tp 1'b0;
  else
    RxAbortSync1 <=#Tp RxAbort;
end
 
always @ (posedge WB_CLK_I or posedge Reset)
begin
  if(Reset)
    RxAbortSync2 <=#Tp 1'b0;
  else
    RxAbortSync2 <=#Tp RxAbortSync1;
end
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxAbortSyncb1 <=#Tp 1'b0;
  else
    RxAbortSyncb1 <=#Tp RxAbortSync2;
end
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxAbortSyncb2 <=#Tp 1'b0;
  else
    RxAbortSyncb2 <=#Tp RxAbortSyncb1;
end
 
 
 
 
 
 
// Interrupts
assign TxB_IRQ = 1'b0;
assign TxE_IRQ = 1'b0;
assign RxB_IRQ = 1'b0;
assign RxF_IRQ = 1'b0;
assign Busy_IRQ = 1'b0;
 
 
 
reg LoadStatusBlocked;
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    LoadStatusBlocked <=#Tp 1'b0;
  else
  if(LoadRxStatus)
    LoadStatusBlocked <=#Tp 1'b1;
  else
  if(RxStatusWrite_rck)
    LoadStatusBlocked <=#Tp 1'b0;
end
 
// LatchedRxLength[15:0]
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    LatchedRxLength[15:0] <=#Tp 16'h0;
  else
  if(LoadRxStatus & ~LoadStatusBlocked)
    LatchedRxLength[15:0] <=#Tp RxLength[15:0];
end
 
 
 
assign RxStatusIn = {InvalidSymbol, DribbleNibble, ReceivedPacketTooBig, ShortFrame, LatchedCrcError, RxLateCollision};
 
always @ (posedge MRxClk or posedge Reset)
begin
  if(Reset)
    RxStatusInLatched <=#Tp 'h0;
  else
  if(LoadRxStatus & ~LoadStatusBlocked)
    RxStatusInLatched <=#Tp RxStatusIn;
end
 
 
 
endmodule
 

Line No.	Rev	Author	Line
1	38	mohor	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// eth_wishbone.v ////`
4			`//// ////`
5			`//// This file is part of the Ethernet IP core project ////`
6			`//// http://www.opencores.org/projects/ethmac/ ////`
7			`//// ////`
8			`//// Author(s): ////`
9			`//// - Igor Mohor (igorM@opencores.org) ////`
10			`//// ////`
11			`//// All additional information is avaliable in the Readme.txt ////`
12			`//// file. ////`
13			`//// ////`
14			`//////////////////////////////////////////////////////////////////////`
15			`//// ////`
16			`//// Copyright (C) 2001 Authors ////`
17			`//// ////`
18			`//// This source file may be used and distributed without ////`
19			`//// restriction provided that this copyright statement is not ////`
20			`//// removed from the file and that any derivative work contains ////`
21			`//// the original copyright notice and the associated disclaimer. ////`
22			`//// ////`
23			`//// This source file is free software; you can redistribute it ////`
24			`//// and/or modify it under the terms of the GNU Lesser General ////`
25			`//// Public License as published by the Free Software Foundation; ////`
26			`//// either version 2.1 of the License, or (at your option) any ////`
27			`//// later version. ////`
28			`//// ////`
29			`//// This source is distributed in the hope that it will be ////`
30			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
31			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
32			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
33			`//// details. ////`
34			`//// ////`
35			`//// You should have received a copy of the GNU Lesser General ////`
36			`//// Public License along with this source; if not, download it ////`
37			`//// from http://www.opencores.org/lgpl.shtml ////`
38			`//// ////`
39			`//////////////////////////////////////////////////////////////////////`
40			`//`
41			`// CVS Revision History`
42			`//`
43			`// $Log: not supported by cvs2svn $`
44	43	mohor	`// Revision 1.5 2002/02/08 16:21:54 mohor`
45			`// Rx status is written back to the BD.`
46			`//`
47	42	mohor	`// Revision 1.4 2002/02/06 14:10:21 mohor`
48			`// non-DMA host interface added. Select the right configutation in eth_defines.`
49			`//`
50	41	mohor	`// Revision 1.3 2002/02/05 16:44:39 mohor`
51			`// Both rx and tx part are finished. Tested with wb_clk_i between 10 and 200`
52			`// MHz. Statuses, overrun, control frame transmission and reception still need`
53			`// to be fixed.`
54			`//`
55	40	mohor	`// Revision 1.2 2002/02/01 12:46:51 mohor`
56			`// Tx part finished. TxStatus needs to be fixed. Pause request needs to be`
57			`// added.`
58			`//`
59	39	mohor	`// Revision 1.1 2002/01/23 10:47:59 mohor`
60			`// Initial version. Equals to eth_wishbonedma.v at this moment.`
61	38	mohor	`//`
62			`//`
63			`//`
64	39	mohor	`//`
65	38	mohor
66	40	mohor	`// igor !!!`
67			`// Napravi, pause frame`
68	38	mohor
69	40	mohor	`// Poskusi spremeniti vse signale na wb strani da bodo imeli enake koncnice (npr _wb),`
70			`// vsi na MTxClk strani pa _txclk`
71			`// Evaluiraj dato da pre start framom ni prisel abort ali kaj podobnega (kot je bilo v GotData, ki ga zbrisi)`
72
73			`// Naj m_wb_err_i vzge status underrun ali uverrun`
74
75	38	mohor	`include "eth_defines.v"
76			`include "timescale.v"
77
78
79			`module eth_wishbone`
80			`(`
81
82			`// WISHBONE common`
83	40	mohor	`WB_CLK_I, WB_DAT_I, WB_DAT_O,`
84	38	mohor
85			`// WISHBONE slave`
86			`WB_ADR_I, WB_SEL_I, WB_WE_I, WB_ACK_O,`
87	40	mohor	`BDCs,`
88	38	mohor
89	40	mohor	`Reset,`
90
91	39	mohor	`// WISHBONE master`
92			`m_wb_adr_o, m_wb_sel_o, m_wb_we_o,`
93			`m_wb_dat_o, m_wb_dat_i, m_wb_cyc_o,`
94			`m_wb_stb_o, m_wb_ack_i, m_wb_err_i,`
95
96	38	mohor	`//TX`
97	54	billditt	`MTxClk, TxStartFrm, TxEndFrm, TxUsedData, TxData, StatusIzTxEthMACModula,`
98	38	mohor	`TxRetry, TxAbort, TxUnderRun, TxDone, TPauseRq, TxPauseTV, PerPacketCrcEn,`
99			`PerPacketPad,`
100
101			`//RX`
102	40	mohor	`MRxClk, RxData, RxValid, RxStartFrm, RxEndFrm, RxAbort,`
103	38	mohor
104			`// Register`
105	42	mohor	`r_TxEn, r_RxEn, r_TxBDNum, r_DmaEn, TX_BD_NUM_Wr, r_RecSmall,`
106	38	mohor
107	39	mohor	`WillSendControlFrame, TxCtrlEndFrm, // igor !!! WillSendControlFrame gre najbrz ven`
108	38	mohor
109			`// Interrupts`
110	42	mohor	`TxB_IRQ, TxE_IRQ, RxB_IRQ, RxF_IRQ, Busy_IRQ,`
111
112			`InvalidSymbol, LatchedCrcError, RxLateCollision, ShortFrame, DribbleNibble,`
113	54	billditt	`ReceivedPacketTooBig, RxLength, LoadRxStatus`
114	38	mohor
115			`);`
116
117
118			`parameter Tp = 1;`
119
120			`// WISHBONE common`
121			`input WB_CLK_I; // WISHBONE clock`
122			`input [31:0] WB_DAT_I; // WISHBONE data input`
123			`output [31:0] WB_DAT_O; // WISHBONE data output`
124
125			`// WISHBONE slave`
126			`input [9:2] WB_ADR_I; // WISHBONE address input`
127			`input [3:0] WB_SEL_I; // WISHBONE byte select input`
128			`input WB_WE_I; // WISHBONE write enable input`
129			`input BDCs; // Buffer descriptors are selected`
130			`output WB_ACK_O; // WISHBONE acknowledge output`
131
132	39	mohor	`// WISHBONE master`
133			`output [31:0] m_wb_adr_o; //`
134			`output [3:0] m_wb_sel_o; //`
135			`output m_wb_we_o; //`
136			`output [31:0] m_wb_dat_o; //`
137			`output m_wb_cyc_o; //`
138			`output m_wb_stb_o; //`
139			`input [31:0] m_wb_dat_i; //`
140			`input m_wb_ack_i; //`
141			`input m_wb_err_i; //`
142
143	40	mohor	`input Reset; // Reset signal`
144	39	mohor
145	54	billditt	`// Status signals`
146	42	mohor	`input InvalidSymbol; // Invalid symbol was received during reception in 100 Mbps mode`
147			`input LatchedCrcError; // CRC error`
148			`input RxLateCollision; // Late collision occured while receiving frame`
149			`input ShortFrame; // Frame shorter then the minimum size (r_MinFL) was received while small packets are enabled (r_RecSmall)`
150			`input DribbleNibble; // Extra nibble received`
151			`input ReceivedPacketTooBig;// Received packet is bigger than r_MaxFL`
152			`input [15:0] RxLength; // Length of the incoming frame`
153			`input LoadRxStatus; // Rx status was loaded`
154	39	mohor
155	38	mohor	`// Tx`
156			`input MTxClk; // Transmit clock (from PHY)`
157			`input TxUsedData; // Transmit packet used data`
158	54	billditt	`input [15:0] StatusIzTxEthMACModula;`
159	38	mohor	`input TxRetry; // Transmit packet retry`
160			`input TxAbort; // Transmit packet abort`
161			`input TxDone; // Transmission ended`
162			`output TxStartFrm; // Transmit packet start frame`
163			`output TxEndFrm; // Transmit packet end frame`
164			`output [7:0] TxData; // Transmit packet data byte`
165			`output TxUnderRun; // Transmit packet under-run`
166			`output PerPacketCrcEn; // Per packet crc enable`
167			`output PerPacketPad; // Per packet pading`
168			`output TPauseRq; // Tx PAUSE control frame`
169			`output [15:0] TxPauseTV; // PAUSE timer value`
170			`input WillSendControlFrame;`
171			`input TxCtrlEndFrm;`
172
173			`// Rx`
174			`input MRxClk; // Receive clock (from PHY)`
175			`input [7:0] RxData; // Received data byte (from PHY)`
176			`input RxValid; //`
177			`input RxStartFrm; //`
178			`input RxEndFrm; //`
179	40	mohor	`input RxAbort; // This signal is set when address doesn't match.`
180	38	mohor
181			`//Register`
182			`input r_TxEn; // Transmit enable`
183			`input r_RxEn; // Receive enable`
184			`input [7:0] r_TxBDNum; // Receive buffer descriptor number`
185			`input r_DmaEn; // DMA enable`
186			`input TX_BD_NUM_Wr; // RxBDNumber written`
187	42	mohor	`input r_RecSmall; // Receive small frames igor !!! tega uporabi`
188	38	mohor
189			`// Interrupts`
190			`output TxB_IRQ;`
191			`output TxE_IRQ;`
192			`output RxB_IRQ;`
193			`output RxF_IRQ;`
194			`output Busy_IRQ;`
195
196			`reg TxStartFrm;`
197			`reg TxEndFrm;`
198			`reg [7:0] TxData;`
199
200			`reg TxUnderRun;`
201
202			`reg TxBDRead;`
203	39	mohor	`wire TxStatusWrite;`
204	38	mohor
205			`reg [1:0] TxValidBytesLatched;`
206
207			`reg [15:0] TxLength;`
208	54	billditt	`reg [15:0] TxStatus;`
209	38	mohor
210	54	billditt	`reg [14:13] RxStatusOld;`
211	38	mohor
212			`reg TxStartFrm_wb;`
213			`reg TxRetry_wb;`
214	39	mohor	`reg TxAbort_wb;`
215	38	mohor	`reg TxDone_wb;`
216
217			`reg TxDone_wb_q;`
218			`reg TxAbort_wb_q;`
219	39	mohor	`reg TxRetry_wb_q;`
220	38	mohor	`reg RxBDReady;`
221			`reg TxBDReady;`
222
223			`reg RxBDRead;`
224	40	mohor	`wire RxStatusWrite;`
225	38	mohor
226			`reg [31:0] TxDataLatched;`
227			`reg [1:0] TxByteCnt;`
228			`reg LastWord;`
229	39	mohor	`reg ReadTxDataFromFifo_tck;`
230	38	mohor
231			`reg BlockingTxStatusWrite;`
232			`reg BlockingTxBDRead;`
233
234	40	mohor	`reg Flop;`
235	38	mohor
236			`reg [7:0] TxBDAddress;`
237			`reg [7:0] RxBDAddress;`
238
239			`reg TxRetrySync1;`
240			`reg TxAbortSync1;`
241	39	mohor	`reg TxDoneSync1;`
242	38	mohor
243			`reg TxAbort_q;`
244			`reg TxRetry_q;`
245			`reg TxUsedData_q;`
246
247			`reg [31:0] RxDataLatched2;`
248	40	mohor	`reg [23:0] RxDataLatched1;`
249	38	mohor	`reg [1:0] RxValidBytes;`
250			`reg [1:0] RxByteCnt;`
251			`reg LastByteIn;`
252			`reg ShiftWillEnd;`
253
254	40	mohor	`reg WriteRxDataToFifo;`
255	42	mohor	`reg [15:0] LatchedRxLength;`
256	38	mohor
257	40	mohor	`reg ShiftEnded;`
258	38	mohor
259	40	mohor	`reg BDWrite; // BD Write Enable for access from WISHBONE side`
260			`reg BDRead; // BD Read access from WISHBONE side`
261	39	mohor	`wire [31:0] RxBDDataIn; // Rx BD data in`
262			`wire [31:0] TxBDDataIn; // Tx BD data in`
263	38	mohor
264	39	mohor	`reg TxEndFrm_wb;`
265	38	mohor
266	39	mohor	`wire TxRetryPulse;`
267	38	mohor	`wire TxDonePulse;`
268			`wire TxAbortPulse;`
269
270			`wire StartRxBDRead;`
271			`wire StartRxStatusWrite;`
272
273			`wire StartTxBDRead;`
274
275			`wire TxIRQEn;`
276			`wire WrapTxStatusBit;`
277
278			`wire WrapRxStatusBit;`
279
280			`wire [1:0] TxValidBytes;`
281
282			`wire [7:0] TempTxBDAddress;`
283			`wire [7:0] TempRxBDAddress;`
284
285			`wire SetGotData;`
286			`wire GotDataEvaluate;`
287
288	39	mohor	`reg temp_ack;`
289	38	mohor
290	54	billditt	`wire [5:0] RxStatusIn;`
291			`reg [5:0] RxStatusInLatched;`
292	42	mohor
293	39	mohor	`ifdef ETH_REGISTERED_OUTPUTS
294			`reg temp_ack2;`
295			`reg [31:0] registered_ram_do;`
296			`endif
297	38	mohor
298	39	mohor	`reg WbEn, WbEn_q;`
299			`reg RxEn, RxEn_q;`
300			`reg TxEn, TxEn_q;`
301	38	mohor
302	39	mohor	`wire ram_ce;`
303			`wire ram_we;`
304			`wire ram_oe;`
305			`reg [7:0] ram_addr;`
306			`reg [31:0] ram_di;`
307			`wire [31:0] ram_do;`
308	38	mohor
309	39	mohor	`wire StartTxPointerRead;`
310	54	billditt	`wire ResetTxPointerRead;`
311	39	mohor	`reg TxPointerRead;`
312			`reg TxEn_needed;`
313	40	mohor	`reg RxEn_needed;`
314	38	mohor
315	40	mohor	`wire StartRxPointerRead;`
316			`reg RxPointerRead;`
317	38	mohor
318	39	mohor
319	40	mohor	`always @ (posedge WB_CLK_I or posedge Reset)`
320			`begin`
321			`if(Reset)`
322			`begin`
323			`temp_ack <=#Tp 1'b0;`
324			`ifdef ETH_REGISTERED_OUTPUTS
325			`temp_ack2 <=#Tp 1'b0;`
326			`registered_ram_do <=#Tp 32'h0;`
327			`endif
328			`end`
329			`else`
330			`begin`
331			`temp_ack <=#Tp BDWrite & WbEn & WbEn_q \| BDRead & WbEn & ~WbEn_q;`
332			`ifdef ETH_REGISTERED_OUTPUTS
333			`temp_ack2 <=#Tp temp_ack;`
334			`registered_ram_do <=#Tp ram_do;`
335			`endif
336			`end`
337			`end`
338	39	mohor
339			`ifdef ETH_REGISTERED_OUTPUTS
340			`assign WB_ACK_O = temp_ack2;`
341			`assign WB_DAT_O = registered_ram_do;`
342			`else
343			`assign WB_ACK_O = temp_ack;`
344			`assign WB_DAT_O = ram_do;`
345			`endif
346
347
348	41	mohor	`// Generic synchronous single-port RAM interface`
349	39	mohor	`generic_spram #(8, 32) ram (`
350			`// Generic synchronous single-port RAM interface`
351	40	mohor	`.clk(WB_CLK_I), .rst(Reset), .ce(ram_ce), .we(ram_we), .oe(ram_oe), .addr(ram_addr), .di(ram_di), .do(ram_do)`
352	39	mohor	`);`
353	41	mohor
354	39	mohor	`assign ram_ce = 1'b1;`
355	40	mohor	`assign ram_we = BDWrite & WbEn & WbEn_q \| TxStatusWrite \| RxStatusWrite;`
356			`assign ram_oe = BDRead & WbEn & WbEn_q \| TxEn & TxEn_q & (TxBDRead \| TxPointerRead) \| RxEn & RxEn_q & (RxBDRead \| RxPointerRead); // Tu manjka se read kadar se bere RxBD`
357	39	mohor
358
359	40	mohor	`always @ (posedge WB_CLK_I or posedge Reset)`
360	38	mohor	`begin`
361	40	mohor	`if(Reset)`
362	39	mohor	`TxEn_needed <=#Tp 1'b0;`
363	38	mohor	`else`
364	40	mohor	`if(~TxBDReady & r_TxEn & WbEn & ~WbEn_q)`
365	39	mohor	`TxEn_needed <=#Tp 1'b1;`
366			`else`
367			`if(TxPointerRead & TxEn & TxEn_q)`
368			`TxEn_needed <=#Tp 1'b0;`
369	38	mohor	`end`
370
371
372	39	mohor	`// Enabling access to the RAM for three devices.`
373	40	mohor	`always @ (posedge WB_CLK_I or posedge Reset)`
374	39	mohor	`begin`
375	40	mohor	`if(Reset)`
376	39	mohor	`begin`
377			`WbEn <=#Tp 1'b1;`
378			`RxEn <=#Tp 1'b0;`
379			`TxEn <=#Tp 1'b0;`
380			`ram_addr <=#Tp 8'h0;`
381			`ram_di <=#Tp 32'h0;`
382			`end`
383			`else`
384			`begin`
385			`// Switching between three stages depends on enable signals`
386	40	mohor	`casex ({WbEn_q, RxEn_q, TxEn_q, RxEn_needed, TxEn_needed}) // synopsys parallel_case`
387	39	mohor	`5'b100_1x :`
388			`begin`
389			`WbEn <=#Tp 1'b0;`
390			`RxEn <=#Tp 1'b1; // wb access stage and r_RxEn is enabled`
391			`TxEn <=#Tp 1'b0;`
392	40	mohor	`ram_addr <=#Tp RxBDAddress + RxPointerRead;`
393	39	mohor	`ram_di <=#Tp RxBDDataIn;`
394			`end`
395			`5'b100_01 :`
396			`begin`
397			`WbEn <=#Tp 1'b0;`
398			`RxEn <=#Tp 1'b0;`
399			`TxEn <=#Tp 1'b1; // wb access stage, r_RxEn is disabled but r_TxEn is enabled`
400			`ram_addr <=#Tp TxBDAddress + TxPointerRead;`
401			`ram_di <=#Tp TxBDDataIn;`
402			`end`
403			`5'b010_x0 :`
404			`begin`
405			`WbEn <=#Tp 1'b1; // RxEn access stage and r_TxEn is disabled`
406			`RxEn <=#Tp 1'b0;`
407			`TxEn <=#Tp 1'b0;`
408			`ram_addr <=#Tp WB_ADR_I[9:2];`
409			`ram_di <=#Tp WB_DAT_I;`
410	40	mohor	`BDWrite <=#Tp BDCs & WB_WE_I;`
411			`BDRead <=#Tp BDCs & ~WB_WE_I;`
412	39	mohor	`end`
413			`5'b010_x1 :`
414			`begin`
415			`WbEn <=#Tp 1'b0;`
416			`RxEn <=#Tp 1'b0;`
417			`TxEn <=#Tp 1'b1; // RxEn access stage and r_TxEn is enabled`
418			`ram_addr <=#Tp TxBDAddress + TxPointerRead;`
419			`ram_di <=#Tp TxBDDataIn;`
420			`end`
421			`5'b001_xx :`
422			`begin`
423			`WbEn <=#Tp 1'b1; // TxEn access stage (we always go to wb access stage)`
424			`RxEn <=#Tp 1'b0;`
425			`TxEn <=#Tp 1'b0;`
426			`ram_addr <=#Tp WB_ADR_I[9:2];`
427			`ram_di <=#Tp WB_DAT_I;`
428	40	mohor	`BDWrite <=#Tp BDCs & WB_WE_I;`
429			`BDRead <=#Tp BDCs & ~WB_WE_I;`
430	39	mohor	`end`
431			`5'b100_00 :`
432			`begin`
433			`WbEn <=#Tp 1'b0; // WbEn access stage and there is no need for other stages. WbEn needs to be switched off for a bit`
434			`end`
435			`5'b000_00 :`
436			`begin`
437			`WbEn <=#Tp 1'b1; // Idle state. We go to WbEn access stage.`
438			`RxEn <=#Tp 1'b0;`
439			`TxEn <=#Tp 1'b0;`
440			`ram_addr <=#Tp WB_ADR_I[9:2];`
441			`ram_di <=#Tp WB_DAT_I;`
442	40	mohor	`BDWrite <=#Tp BDCs & WB_WE_I;`
443			`BDRead <=#Tp BDCs & ~WB_WE_I;`
444	39	mohor	`end`
445			`default :`
446			`begin`
447			`WbEn <=#Tp 1'b1; // We go to wb access stage`
448			`RxEn <=#Tp 1'b0;`
449			`TxEn <=#Tp 1'b0;`
450			`ram_addr <=#Tp WB_ADR_I[9:2];`
451			`ram_di <=#Tp WB_DAT_I;`
452	40	mohor	`BDWrite <=#Tp BDCs & WB_WE_I;`
453			`BDRead <=#Tp BDCs & ~WB_WE_I;`
454	39	mohor	`end`
455			`endcase`
456			`end`
457			`end`
458
459
460			`// Delayed stage signals`
461	40	mohor	`always @ (posedge WB_CLK_I or posedge Reset)`
462	39	mohor	`begin`
463	40	mohor	`if(Reset)`
464	39	mohor	`begin`
465			`WbEn_q <=#Tp 1'b0;`
466			`RxEn_q <=#Tp 1'b0;`
467			`TxEn_q <=#Tp 1'b0;`
468			`end`
469			`else`
470			`begin`
471			`WbEn_q <=#Tp WbEn;`
472			`RxEn_q <=#Tp RxEn;`
473			`TxEn_q <=#Tp TxEn;`
474			`end`
475			`end`
476
477	38	mohor	`// Changes for tx occur every second clock. Flop is used for this manner.`
478	40	mohor	`always @ (posedge MTxClk or posedge Reset)`
479	38	mohor	`begin`
480	40	mohor	`if(Reset)`
481	38	mohor	`Flop <=#Tp 1'b0;`
482			`else`
483			`if(TxDone \| TxAbort \| TxRetry_q)`
484			`Flop <=#Tp 1'b0;`
485			`else`
486			`if(TxUsedData)`
487			`Flop <=#Tp ~Flop;`
488			`end`
489
490	39	mohor	`wire ResetTxBDReady;`
491			`assign ResetTxBDReady = TxDonePulse \| TxAbortPulse \| TxRetryPulse;`
492	38	mohor
493			`// Latching READY status of the Tx buffer descriptor`
494	40	mohor	`always @ (posedge WB_CLK_I or posedge Reset)`
495	38	mohor	`begin`
496	40	mohor	`if(Reset)`
497	38	mohor	`TxBDReady <=#Tp 1'b0;`
498			`else`
499	40	mohor	`if(TxEn & TxEn_q & TxBDRead)`
500			`TxBDReady <=#Tp ram_do[15] & (ram_do[31:16] > 4); // TxBDReady is sampled only once at the beginning.`

Browse

Tools

Subversion Repositories ethmac

[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_wishbone.v] - Blame information for rev 54