URL https://opencores.org/ocsvn/firgen/firgen/trunk

Subversion Repositories firgen

[/] [firgen/] [trunk/] [firgen/] [RedFIR/] [admin/] [cvs.sh] - Blame information for rev 10

Go to most recent revision | Details | Compare with Previous | View Log


#! /bin/sh
#
# cvs.sh
#
# This file contains support code from Makefile.common
# It defines a shell function for each known target
# and then does a case to call the correct function.
 
call_and_fix_autoconf()
{
  $AUTOCONF || exit 1
  if test -r configure.in.in ; then
    perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\
    \\n  perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\
    \\\\\\n    || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\
    \\n  rm -f \\\$CONFIG_STATUS.bak\\nfi\
    \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/;" configure
  fi
}
 
strip_makefile()
{
  if test -f $makefile_wo; then :; else
    perl -e '$in=0; while ( <> ) { $in = 1 if ($_=~ m/^if /); print $_ unless ($in); $in = 0 if ($_ =~ m/^endif/); }' < Makefile.am.in > $makefile_wo
  fi
}
 
check_autotool_versions()
{
AUTOCONF_VERSION=`$AUTOCONF --version | head -1`
case $AUTOCONF_VERSION in
  Autoconf*2.5* | autoconf*2.5* ) : ;;
  "" )
    echo "*** AUTOCONF NOT FOUND!."
    echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"
    exit 1
    ;;
  * )
    echo "*** YOU'RE USING $AUTOCONF_VERSION."
    echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"
    exit 1
    ;;
esac
 
AUTOHEADER_VERSION=`$AUTOHEADER --version | head -1`
case $AUTOHEADER_VERSION in
  Autoconf*2.5* | autoheader*2.5* ) : ;;
  "" )
    echo "*** AUTOHEADER NOT FOUND!."
    echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"
    exit 1
    ;;
  * )
    echo "*** YOU'RE USING $AUTOHEADER_VERSION."
    echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"
    exit 1
    ;;
esac
 
AUTOMAKE_STRING=`$AUTOMAKE --version | head -1`
case $AUTOMAKE_STRING in
  automake*1.5d* )
    echo "*** YOU'RE USING $AUTOMAKE_STRING."
    echo "*** KDE requires automake 1.5"
    exit 1
    ;;
  automake*1.5* | automake*1.5-* | automake*1.6.* | automake*1.7* ) : ;;
  "" )
    echo "*** AUTOMAKE NOT FOUND!."
    echo "*** KDE requires automake 1.5"
    exit 1
    ;;
  unsermake* ) :
    echo "*** YOU'RE USING UNSERMAKE."
    echo "*** GOOD LUCK!! :)"
    ;;
  * )
    echo "*** YOU'RE USING $AUTOMAKE_STRING."
    echo "*** KDE requires automake 1.5"
    exit 1
    ;;
esac
}
 
cvs()
{
check_autotool_versions
 
### Produce acinclude.m4
if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then
  echo "*** Creating acinclude.m4"
  rm -f acinclude.m4 configure.files
 
  strip_makefile
  $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4
fi
 
### Make new subdirs and configure.in.
### The make calls could be optimized away here,
### with a little thought.
if test -r configure.in.in; then
  rm -f subdirs configure.in
  echo "*** Creating list of subdirectories"
  subdirs
  echo "*** Creating configure.in"
  configure_files
  strip_makefile
  $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1
fi
 
echo "*** Creating aclocal.m4"
$ACLOCAL || exit 1
echo "*** Creating configure"
call_and_fix_autoconf
 
if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
  echo "*** Creating config.h template"
  $AUTOHEADER || exit 1
fi
 
echo "*** Creating Makefile templates"
$AUTOMAKE || exit 1
if test -z "$UNSERMAKE"; then
  echo "*** Postprocessing Makefile templates"
  perl -w admin/am_edit || exit 1
fi
 
if egrep "^cvs-local:" $makefile_am >/dev/null; then \
  strip_makefile
  $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1
fi
 
echo "*** Creating date/time stamp"
touch stamp-h.in
 
echo "*** Finished"
echo "    Don't forget to run ./configure"
echo "    If you haven't done so in a while, run ./configure --help"
}
 
dist()
{
check_autotool_versions
 
###
### First build all of the files necessary to do just "make"
###
if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then
  strip_makefile
  $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4
fi
if test -r configure.in.in; then
  subdirs
  configure_files
  strip_makefile
  $MAKE -f $makefile_wo top_srcdir=. ./configure.in
fi
$ACLOCAL
$AUTOHEADER
$AUTOMAKE --foreign --include-deps
perl -w admin/am_edit
call_and_fix_autoconf
touch stamp-h.in
if grep "^cvs-local:" $makefile_am >/dev/null; then
  strip_makefile
  $MAKE -f $makefile_wo cvs-local top_srcdir=.
fi
 
###
### Then make messages
###
if test -d po; then
 LIST=`find ./po -name "*.po"`
 for i in $LIST; do
  file2=`echo $i | sed -e "s#\.po#\.gmo#"`
  msgfmt -o $file2 $i || touch $file2
 done
fi
if grep "^cvs-dist-local:" $makefile_am >/dev/null; then
  strip_makefile
  $MAKE -f $makefile_wo cvs-dist-local top_srcdir=.
fi
}
 
subdir_dist()
{
$ACLOCAL
$AUTOHEADER
$AUTOMAKE --foreign --include-deps
perl -w ../admin/am_edit
call_and_fix_autoconf
}
 
configure_in()
{
rm -f configure.in configure.in.new
kde_use_qt_param=
test -f configure.files || { echo "need configure.files for configure.in"; exit 1; }
cat `egrep -v "configure.in.bot" < configure.files` > configure.in.new
echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new
if test -f Makefile.am.in; then
  subdirs=`cat subdirs`
  for dir in $subdirs; do
    dir=`echo $dir | sed -e "s,[-+.],_,g"`
    echo "AM_CONDITIONAL($dir""_SUBDIR_included, test \"x\$$dir""_SUBDIR_included\" = xyes)" >> configure.in.new
  done
fi
# echo "AC_OUTPUT( \\" >> configure.in.new
mfs=`find . -type d -print | fgrep -v "/." | \
     sed -e "s#\./##" -e "/^debian/d" | sort`
for i in $mfs; do
  topleveldir=`echo $i| sed -e "s#/.*##"`
  if test -f $topleveldir/configure.in; then
        continue
  fi
  if test -f $i/Makefile.am; then :; else
        continue
  fi
  if test -s inst-apps; then
    if grep "\"^$topleveldir\"" inst-apps > /dev/null 2>&1; then
        continue
    fi
  fi
  if test "$i" = "."; then
     echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new
  else
     echo "AC_CONFIG_FILES([ $i/Makefile ])" >> configure.in.new
  fi
  if test -n "$UNSERMAKE"; then
      if test "$i" = "."; then
        echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new
      else
        echo "AC_CONFIG_FILES([ $i/Makefile.rules ])" >> configure.in.new
      fi
  fi
done
 
files=`cat configure.files`
list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"`
for file in $list; do
    echo "AC_CONFIG_FILES([ $file ])" >>  configure.in.new
done
 
if test -n "$UNSERMAKE"; then
  echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new
fi
echo "AC_OUTPUT" >> configure.in.new
modulename=
if test -f configure.in.in; then
   if head -2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then
      kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"`
   fi
   if head -2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then
      line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in`
      if test -n "$line"; then
          modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"`
          VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"`
      fi
      sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \
          configure.in.new > configure.in && mv configure.in configure.in.new
   fi
fi
if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then
     VERSION="\"3.1.0\""
fi
if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then
   modulename=`pwd`;
   modulename=`basename $modulename`
   esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"`
   modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"`
 
fi
if test -n "$kde_use_qt_param"; then
      sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \
        configure.in.new > configure.in && mv configure.in configure.in.new
fi
sed -e "s#@MODULENAME@#$modulename#" configure.in.new |
        sed -e "s#@VERSION@#$VERSION#" > configure.in
botfiles=`cat configure.files | egrep "configure.in.bot"`
test -n "$botfiles" && cat $botfiles >> configure.in
cat $admindir/configure.in.bot.end >> configure.in
rm -f configure.in.new
}
 
configure_files()
{
admindir=NO
for i in . .. ../.. ../../..; do
  if test -x $i/admin; then admindir=$i/admin; break; fi
done
rm -f configure.files
touch configure.files
if test -f configure.in.in && head -2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then
        echo $admindir/configure.in.min >> configure.files
fi
test -f configure.in.in && echo configure.in.in >> configure.files
list=`find . -name "configure.in.in" -o -name "configure.in.bot" | sort`
for i in $list; do if test -f $i && test `dirname $i` != "." ; then
  echo $i >> configure.files
fi; done
test -f configure.in.mid && echo configure.in.mid >> configure.files
test -f configure.in.bot && echo configure.in.bot >> configure.files
}
 
subdirs()
{
dirs=
compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -1`
compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -1`
for i in `ls -1`; do
    if test -f $i/Makefile.am; then
       case " $compilefirst $compilelast " in
         *" $i "*) ;;
         *) dirs="$dirs $i"
       esac
    fi
done
 
: > ./_SUBDIRS
 
for d in $compilefirst; do
   echo $d >> ./_SUBDIRS
done
 
(for d in $dirs; do
   list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -1`
   for s in $list; do
      echo $s $d
   done
   list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -1`
   for s in $list; do
      echo $d $s
   done
   echo $d $d
done ) | tsort >> ./_SUBDIRS
 
for d in $compilelast; do
   echo $d >> ./_SUBDIRS
done
 
if test -f Makefile.am.in; then
  cp Makefile.am.in Makefile.am
  if test -n "$UNSERMAKE"; then
    topsubdirs=
    for i in $compilefirst $dirs $compilelast; do
       vari=`echo $i | sed -e "s,[-+],_,g"`
       echo "if $vari""_SUBDIR_included" >> Makefile.am
       echo "$vari""_SUBDIR=$i" >> Makefile.am
       echo "endif" >> Makefile.am
       topsubdirs="$topsubdirs \$($vari""_SUBDIR)"
    done
    echo "SUBDIRS=$topsubdirs" >> Makefile.am
  else
    echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am
  fi
fi
if test -r subdirs && diff subdirs _SUBDIRS > /dev/null; then
  rm -f _SUBDIRS
fi
test -r _SUBDIRS && mv _SUBDIRS subdirs || true
}
 
cvs_clean()
{
if test -d CVS; then :; else
  echo "You don't have a toplevel CVS directory."
  echo "You most certainly didn't use cvs to get these sources."
  echo "But this function depends on cvs's information."
  exit 1
fi
perl $admindir/cvs-clean.pl
}
 
package_merge()
{
catalogs=$POFILES
for cat in $catalogs; do
  msgmerge -o $cat.new $cat $PACKAGE.pot
  if test -s $cat.new; then
    grep -v "\"POT-Creation" $cat.new > $cat.new.2
    grep -v "\"POT-Creation" $cat >> $cat.new.1
    if diff $cat.new.1 $cat.new.2; then
        rm $cat.new
    else
        mv $cat.new $cat
    fi
    rm -f $cat.new.1 $cat.new.2
  fi
done
}
 
package_messages()
{
rm -rf po.backup
mkdir po.backup
 
for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
  egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i
  cp po/$i po.backup/backup_$i
  touch -r po/$i po.backup/backup_$i
  rm po/$i
done
 
podir=${podir:-$PWD/po}
files=`find . -name Makefile.am | xargs egrep -l '^messages:' `
dirs=`for i in $files; do echo \`dirname $i\`; done`
tmpname="$PWD/messages.log"
if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi
if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi
export EXTRACTRC PREPARETIPS
 
for subdir in $dirs; do
  test -z "$VERBOSE" || echo "Making messages in $subdir"
  (cd $subdir
   if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then
        $EXTRACTRC *.rc *.ui > rc.cpp
   else
        candidates=`ls -1 *.rc *.ui 2>/dev/null`
        if test -n "$candidates"; then
            echo "$subdir has *.rc or *.ui files, but not correct messages line"
        fi
   fi
   if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then
        echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp
   else echo " " > _translatorinfo.cpp
   fi
   perl -e '$mes=0; while (<STDIN>) { next if (/^(if|else|endif)\s/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile
 
   $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \
        XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x ${includedir:-$KDEDIR/include}/kde.pot" \
        messages
   ) 2>&1 | grep -v '^make\[1\]' > $tmpname
   test -s $tmpname && { echo $subdir ; cat "$tmpname"; }
   test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp
   rm -f $subdir/_translatorinfo.cpp
   rm -f $subdir/_transMakefile
done
rm -f $tmpname
for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do
  test -f po/$i || echo "disappeared: $i"
done
for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
   msgmerge -q -o po/$i po/$i po/$i
   egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot
  if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then
        echo "will update $i"
        msgmerge -q po.backup/backup_$i po/$i > temp.pot
        mv temp.pot po/$i
  else
    if test -f po.backup/backup_$i; then
      test -z "$VERBOSE" || echo "I'm restoring $i"
      mv po.backup/backup_$i po/$i
      rm po.backup/$i
    else
      echo "will add $i"
    fi
  fi
done
rm -f temp.pot
rm -rf po.backup
}
 
admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'`
test "x$admindir" = "x$0" && admindir=.
 
test "x$MAKE" = x && MAKE=make
makefile_am=Makefile.am
makefile_wo=Makefile.am
if test -f Makefile.am.in; then
  makefile_am=Makefile.am.in
  makefile_wo=Makefile.am.in.wo
fi
 
# Suck in the AUTOCONF detection code
. $admindir/detect-autoconf.sh
 
###
### Main
###
 
arg=`echo $1 | tr '\-.' __`
case $arg in
  cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \
  cvs_clean | package_merge | package_messages ) $arg ;;
  * ) echo "Usage: cvs.sh <target>"
      echo "Target can be one of:"
      echo "    cvs cvs-clean dist"
      echo "    configure.in configure.files"
      echo "    package-merge package-messages"
      echo ""
      echo "Usage: anything but $1"
      exit 1 ;;
esac
 
if test -f Makefile.am.in.wo; then
  rm Makefile.am.in.wo
fi
 
exit 0

Browse

Tools

Subversion Repositories firgen

[/] [firgen/] [trunk/] [firgen/] [RedFIR/] [admin/] [cvs.sh] - Blame information for rev 10

Line No.	Rev	Author	Line
1	7	redfir	`#! /bin/sh`
2			`#`
3			`# cvs.sh`
4			`#`
5			`# This file contains support code from Makefile.common`
6			`# It defines a shell function for each known target`
7			`# and then does a case to call the correct function.`
8
9			`call_and_fix_autoconf()`
10			`{`
11			`$AUTOCONF \|\| exit 1`
12			`if test -r configure.in.in ; then`
13			`perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\`
14			`\\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\`
15			`\\\\\\n \|\| mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\`
16			`\\n rm -f \\\$CONFIG_STATUS.bak\\nfi\`
17			`\\n\" if /^\\schmod\\s+.\\+x\\s+.*CONFIG_STATUS/;" configure`
18			`fi`
19			`}`
20
21			`strip_makefile()`
22			`{`
23			`if test -f $makefile_wo; then :; else`
24			`perl -e '$in=0; while ( <> ) { $in = 1 if ($_=~ m/^if /); print $_ unless ($in); $in = 0 if ($_ =~ m/^endif/); }' < Makefile.am.in > $makefile_wo`
25			`fi`
26			`}`
27
28			`check_autotool_versions()`
29			`{`
30			AUTOCONF_VERSION=`$AUTOCONF --version \| head -1`
31			`case $AUTOCONF_VERSION in`
32			`Autoconf2.5 \| autoconf2.5 ) : ;;`
33			`"" )`
34			`echo "*** AUTOCONF NOT FOUND!."`
35			`echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"`
36			`exit 1`
37			`;;`
38			`* )`
39			`echo "*** YOU'RE USING $AUTOCONF_VERSION."`
40			`echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"`
41			`exit 1`
42			`;;`
43			`esac`
44
45			AUTOHEADER_VERSION=`$AUTOHEADER --version \| head -1`
46			`case $AUTOHEADER_VERSION in`
47			`Autoconf2.5 \| autoheader2.5 ) : ;;`
48			`"" )`
49			`echo "*** AUTOHEADER NOT FOUND!."`
50			`echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"`
51			`exit 1`
52			`;;`
53			`* )`
54			`echo "*** YOU'RE USING $AUTOHEADER_VERSION."`
55			`echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"`
56			`exit 1`
57			`;;`
58			`esac`
59
60			AUTOMAKE_STRING=`$AUTOMAKE --version \| head -1`
61			`case $AUTOMAKE_STRING in`
62			`automake1.5d )`
63			`echo "*** YOU'RE USING $AUTOMAKE_STRING."`
64			`echo "*** KDE requires automake 1.5"`
65			`exit 1`
66			`;;`
67			`automake1.5 \| automake1.5- \| automake1.6. \| automake1.7 ) : ;;`
68			`"" )`
69			`echo "*** AUTOMAKE NOT FOUND!."`
70			`echo "*** KDE requires automake 1.5"`
71			`exit 1`
72			`;;`
73			`unsermake* ) :`
74			`echo "*** YOU'RE USING UNSERMAKE."`
75			`echo "*** GOOD LUCK!! :)"`
76			`;;`
77			`* )`
78			`echo "*** YOU'RE USING $AUTOMAKE_STRING."`
79			`echo "*** KDE requires automake 1.5"`
80			`exit 1`
81			`;;`
82			`esac`
83			`}`
84
85			`cvs()`
86			`{`
87			`check_autotool_versions`
88
89			`### Produce acinclude.m4`
90			`if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then`
91			`echo "*** Creating acinclude.m4"`
92			`rm -f acinclude.m4 configure.files`
93
94			`strip_makefile`
95			`$MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4`
96			`fi`
97
98			`### Make new subdirs and configure.in.`
99			`### The make calls could be optimized away here,`
100			`### with a little thought.`
101			`if test -r configure.in.in; then`
102			`rm -f subdirs configure.in`
103			`echo "*** Creating list of subdirectories"`
104			`subdirs`
105			`echo "*** Creating configure.in"`
106			`configure_files`
107			`strip_makefile`
108			`$MAKE -f $makefile_wo top_srcdir=. ./configure.in \|\| exit 1`
109			`fi`
110
111			`echo "*** Creating aclocal.m4"`
112			`$ACLOCAL \|\| exit 1`
113			`echo "*** Creating configure"`
114			`call_and_fix_autoconf`
115
116			`if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then`
117			`echo "*** Creating config.h template"`
118			`$AUTOHEADER \|\| exit 1`
119			`fi`
120
121			`echo "*** Creating Makefile templates"`
122			`$AUTOMAKE \|\| exit 1`
123			`if test -z "$UNSERMAKE"; then`
124			`echo "*** Postprocessing Makefile templates"`
125			`perl -w admin/am_edit \|\| exit 1`
126			`fi`
127
128			`if egrep "^cvs-local:" $makefile_am >/dev/null; then \`
129			`strip_makefile`
130			`$MAKE -f $makefile_wo cvs-local top_srcdir=. \|\| exit 1`
131			`fi`
132
133			`echo "*** Creating date/time stamp"`
134			`touch stamp-h.in`
135
136			`echo "*** Finished"`
137			`echo " Don't forget to run ./configure"`
138			`echo " If you haven't done so in a while, run ./configure --help"`
139			`}`
140
141			`dist()`
142			`{`
143			`check_autotool_versions`
144
145			`###`
146			`### First build all of the files necessary to do just "make"`
147			`###`
148			`if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then`
149			`strip_makefile`
150			`$MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4`
151			`fi`
152			`if test -r configure.in.in; then`
153			`subdirs`
154			`configure_files`
155			`strip_makefile`
156			`$MAKE -f $makefile_wo top_srcdir=. ./configure.in`
157			`fi`
158			`$ACLOCAL`
159			`$AUTOHEADER`
160			`$AUTOMAKE --foreign --include-deps`
161			`perl -w admin/am_edit`
162			`call_and_fix_autoconf`
163			`touch stamp-h.in`
164			`if grep "^cvs-local:" $makefile_am >/dev/null; then`
165			`strip_makefile`
166			`$MAKE -f $makefile_wo cvs-local top_srcdir=.`
167			`fi`
168
169			`###`
170			`### Then make messages`
171			`###`
172			`if test -d po; then`
173			LIST=`find ./po -name "*.po"`
174			`for i in $LIST; do`
175			file2=`echo $i \| sed -e "s#\.po#\.gmo#"`
176			`msgfmt -o $file2 $i \|\| touch $file2`
177			`done`
178			`fi`
179			`if grep "^cvs-dist-local:" $makefile_am >/dev/null; then`
180			`strip_makefile`
181			`$MAKE -f $makefile_wo cvs-dist-local top_srcdir=.`
182			`fi`
183			`}`
184
185			`subdir_dist()`
186			`{`
187			`$ACLOCAL`
188			`$AUTOHEADER`
189			`$AUTOMAKE --foreign --include-deps`
190			`perl -w ../admin/am_edit`
191			`call_and_fix_autoconf`
192			`}`
193
194			`configure_in()`
195			`{`
196			`rm -f configure.in configure.in.new`
197			`kde_use_qt_param=`
198			`test -f configure.files \|\| { echo "need configure.files for configure.in"; exit 1; }`
199			cat `egrep -v "configure.in.bot" < configure.files` > configure.in.new
200			`echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new`
201			`if test -f Makefile.am.in; then`
202			subdirs=`cat subdirs`
203			`for dir in $subdirs; do`
204			dir=`echo $dir \| sed -e "s,[-+.],_,g"`
205			`echo "AM_CONDITIONAL($dir""_SUBDIR_included, test \"x\$$dir""_SUBDIR_included\" = xyes)" >> configure.in.new`
206			`done`
207			`fi`
208			`# echo "AC_OUTPUT( \\" >> configure.in.new`
209			mfs=`find . -type d -print \| fgrep -v "/." \| \
210			sed -e "s#\./##" -e "/^debian/d" \| sort`
211			`for i in $mfs; do`
212			topleveldir=`echo $i\| sed -e "s#/.*##"`
213			`if test -f $topleveldir/configure.in; then`
214			`continue`
215			`fi`
216			`if test -f $i/Makefile.am; then :; else`
217			`continue`
218			`fi`
219			`if test -s inst-apps; then`
220			`if grep "\"^$topleveldir\"" inst-apps > /dev/null 2>&1; then`
221			`continue`
222			`fi`
223			`fi`
224			`if test "$i" = "."; then`
225			`echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new`
226			`else`
227			`echo "AC_CONFIG_FILES([ $i/Makefile ])" >> configure.in.new`
228			`fi`
229			`if test -n "$UNSERMAKE"; then`
230			`if test "$i" = "."; then`
231			`echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new`
232			`else`
233			`echo "AC_CONFIG_FILES([ $i/Makefile.rules ])" >> configure.in.new`
234			`fi`
235			`fi`
236			`done`
237
238			files=`cat configure.files`
239			list=`egrep '^dnl AC_OUTPUT\(.\)' $files \| sed -e "s#^.dnl AC_OUTPUT(\(.*\))#\1#"`
240			`for file in $list; do`
241			`echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new`
242			`done`
243
244			`if test -n "$UNSERMAKE"; then`
245			`echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new`
246			`fi`
247			`echo "AC_OUTPUT" >> configure.in.new`
248			`modulename=`
249			`if test -f configure.in.in; then`
250			`if head -2 configure.in.in \| egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then`
251			kde_use_qt_param=`cat configure.in.in \| sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"`
252			`fi`
253			`if head -2 configure.in.in \| egrep "^#MIN_CONFIG" > /dev/null; then`
254			line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in`
255			`if test -n "$line"; then`
256			modulename=`echo $line \| sed -e "s#AM_INIT_AUTOMAKE(\([^,]\),.#\1#"`
257			VERSION=`echo $line \| sed -e "s#AM_INIT_AUTOMAKE([^,], \([^)]\)).#\1#"`
258			`fi`
259			`sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \`
260			`configure.in.new > configure.in && mv configure.in configure.in.new`
261			`fi`
262			`fi`
263			`if test -z "$VERSION" \|\| test "$VERSION" = "@VERSION@"; then`
264			`VERSION="\"3.1.0\""`
265			`fi`
266			`if test -z "$modulename" \|\| test "$modulename" = "@MODULENAME@"; then`
267			modulename=`pwd`;
268			modulename=`basename $modulename`
269			esc_VERSION=`echo $VERSION \| sed -e "s#[^.0-9a-zA-Z]##g"`
270			modulename=`echo $modulename \| sed -e "s#-$esc_VERSION##"`
271
272			`fi`
273			`if test -n "$kde_use_qt_param"; then`
274			`sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \`
275			`configure.in.new > configure.in && mv configure.in configure.in.new`
276			`fi`
277			`sed -e "s#@MODULENAME@#$modulename#" configure.in.new \|`
278			`sed -e "s#@VERSION@#$VERSION#" > configure.in`
279			botfiles=`cat configure.files \| egrep "configure.in.bot"`
280			`test -n "$botfiles" && cat $botfiles >> configure.in`
281			`cat $admindir/configure.in.bot.end >> configure.in`
282			`rm -f configure.in.new`
283			`}`
284
285			`configure_files()`
286			`{`
287			`admindir=NO`
288			`for i in . .. ../.. ../../..; do`
289			`if test -x $i/admin; then admindir=$i/admin; break; fi`
290			`done`
291			`rm -f configure.files`
292			`touch configure.files`
293			`if test -f configure.in.in && head -2 configure.in.in \| grep "^#MIN_CONFIG" > /dev/null; then`
294			`echo $admindir/configure.in.min >> configure.files`
295			`fi`
296			`test -f configure.in.in && echo configure.in.in >> configure.files`
297			list=`find . -name "configure.in.in" -o -name "configure.in.bot" \| sort`
298			for i in $list; do if test -f $i && test `dirname $i` != "." ; then
299			`echo $i >> configure.files`
300			`fi; done`
301			`test -f configure.in.mid && echo configure.in.mid >> configure.files`
302			`test -f configure.in.bot && echo configure.in.bot >> configure.files`
303			`}`
304
305			`subdirs()`
306			`{`
307			`dirs=`
308			compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]=[ ]##p' $makefile_am \| head -1`
309			compilelast=`sed -ne 's#^COMPILE_LAST[ ]=[ ]##p' $makefile_am \| head -1`
310			for i in `ls -1`; do
311			`if test -f $i/Makefile.am; then`
312			`case " $compilefirst $compilelast " in`
313			`" $i ") ;;`
314			`*) dirs="$dirs $i"`
315			`esac`
316			`fi`
317			`done`
318
319			`: > ./_SUBDIRS`
320
321			`for d in $compilefirst; do`
322			`echo $d >> ./_SUBDIRS`
323			`done`
324
325			`(for d in $dirs; do`
326			list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]=[ ]##p" $makefile_am \| head -1`
327			`for s in $list; do`
328			`echo $s $d`
329			`done`
330			list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]=[ ]##p" $makefile_am \| head -1`
331			`for s in $list; do`
332			`echo $d $s`
333			`done`
334			`echo $d $d`
335			`done ) \| tsort >> ./_SUBDIRS`
336
337			`for d in $compilelast; do`
338			`echo $d >> ./_SUBDIRS`
339			`done`
340
341			`if test -f Makefile.am.in; then`
342			`cp Makefile.am.in Makefile.am`
343			`if test -n "$UNSERMAKE"; then`
344			`topsubdirs=`
345			`for i in $compilefirst $dirs $compilelast; do`
346			vari=`echo $i \| sed -e "s,[-+],_,g"`
347			`echo "if $vari""_SUBDIR_included" >> Makefile.am`
348			`echo "$vari""_SUBDIR=$i" >> Makefile.am`
349			`echo "endif" >> Makefile.am`
350			`topsubdirs="$topsubdirs \$($vari""_SUBDIR)"`
351			`done`
352			`echo "SUBDIRS=$topsubdirs" >> Makefile.am`
353			`else`
354			`echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am`
355			`fi`
356			`fi`
357			`if test -r subdirs && diff subdirs _SUBDIRS > /dev/null; then`
358			`rm -f _SUBDIRS`
359			`fi`
360			`test -r _SUBDIRS && mv _SUBDIRS subdirs \|\| true`
361			`}`
362
363			`cvs_clean()`
364			`{`
365			`if test -d CVS; then :; else`
366			`echo "You don't have a toplevel CVS directory."`
367			`echo "You most certainly didn't use cvs to get these sources."`
368			`echo "But this function depends on cvs's information."`
369			`exit 1`
370			`fi`
371			`perl $admindir/cvs-clean.pl`
372			`}`
373
374			`package_merge()`
375			`{`
376			`catalogs=$POFILES`
377			`for cat in $catalogs; do`
378			`msgmerge -o $cat.new $cat $PACKAGE.pot`
379			`if test -s $cat.new; then`
380			`grep -v "\"POT-Creation" $cat.new > $cat.new.2`
381			`grep -v "\"POT-Creation" $cat >> $cat.new.1`
382			`if diff $cat.new.1 $cat.new.2; then`
383			`rm $cat.new`
384			`else`
385			`mv $cat.new $cat`
386			`fi`
387			`rm -f $cat.new.1 $cat.new.2`
388			`fi`
389			`done`
390			`}`
391
392			`package_messages()`
393			`{`
394			`rm -rf po.backup`
395			`mkdir po.backup`
396
397			for i in `ls -1 po/*.pot 2>/dev/null \| sed -e "s#po/##"`; do
398			`egrep -v '^#([^:]\|$)' po/$i \| egrep '^.[^ ]+.$' \| grep -v "\"POT-Creation" > po.backup/$i`
399			`cp po/$i po.backup/backup_$i`
400			`touch -r po/$i po.backup/backup_$i`
401			`rm po/$i`
402			`done`
403
404			`podir=${podir:-$PWD/po}`
405			files=`find . -name Makefile.am \| xargs egrep -l '^messages:' `
406			dirs=`for i in $files; do echo \`dirname $i\`; done`
407			`tmpname="$PWD/messages.log"`
408			`if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi`
409			`if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi`
410			`export EXTRACTRC PREPARETIPS`
411
412			`for subdir in $dirs; do`
413			`test -z "$VERBOSE" \|\| echo "Making messages in $subdir"`
414			`(cd $subdir`
415			if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then
416			`$EXTRACTRC .rc .ui > rc.cpp`
417			`else`
418			candidates=`ls -1 .rc .ui 2>/dev/null`
419			`if test -n "$candidates"; then`
420			`echo "$subdir has .rc or .ui files, but not correct messages line"`
421			`fi`
422			`fi`
423			if test -n "`grep -r KAboutData .c .C 2>/dev/null`"; then
424			`echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp`
425			`else echo " " > _translatorinfo.cpp`
426			`fi`
427			`perl -e '$mes=0; while (<STDIN>) { next if (/^(if\|else\|endif)\s/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am \| egrep -v '^include ' > _transMakefile`
428
429			`$MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \`
430			`XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x ${includedir:-$KDEDIR/include}/kde.pot" \`
431			`messages`
432			`) 2>&1 \| grep -v '^make\[1\]' > $tmpname`
433			`test -s $tmpname && { echo $subdir ; cat "$tmpname"; }`
434			`test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp`
435			`rm -f $subdir/_translatorinfo.cpp`
436			`rm -f $subdir/_transMakefile`
437			`done`
438			`rm -f $tmpname`
439			for i in `ls -1 po.backup/*.pot 2>/dev/null \| sed -e "s#po.backup/##" \| egrep -v '^backup_'`; do
440			`test -f po/$i \|\| echo "disappeared: $i"`
441			`done`
442			for i in `ls -1 po/*.pot 2>/dev/null \| sed -e "s#po/##"`; do
443			`msgmerge -q -o po/$i po/$i po/$i`
444			`egrep -v '^#([^:]\|$)' po/$i \| egrep '^.[^ ]+.$' \| grep -v "\"POT-Creation" > temp.pot`
445			if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then
446			`echo "will update $i"`
447			`msgmerge -q po.backup/backup_$i po/$i > temp.pot`
448			`mv temp.pot po/$i`
449			`else`
450			`if test -f po.backup/backup_$i; then`
451			`test -z "$VERBOSE" \|\| echo "I'm restoring $i"`
452			`mv po.backup/backup_$i po/$i`
453			`rm po.backup/$i`
454			`else`
455			`echo "will add $i"`
456			`fi`
457			`fi`
458			`done`
459			`rm -f temp.pot`
460			`rm -rf po.backup`
461			`}`
462
463			admindir=`echo "$0" \| sed 's%[\\/][^\\/][^\\/]*$%%'`
464			`test "x$admindir" = "x$0" && admindir=.`
465
466			`test "x$MAKE" = x && MAKE=make`
467			`makefile_am=Makefile.am`
468			`makefile_wo=Makefile.am`
469			`if test -f Makefile.am.in; then`
470			`makefile_am=Makefile.am.in`
471			`makefile_wo=Makefile.am.in.wo`
472			`fi`
473
474			`# Suck in the AUTOCONF detection code`
475			`. $admindir/detect-autoconf.sh`
476
477			`###`
478			`### Main`
479			`###`
480
481			arg=`echo $1 \| tr '\-.' __`
482			`case $arg in`
483			`cvs \| dist \| subdir_dist \| configure_in \| configure_files \| subdirs \| \`
484			`cvs_clean \| package_merge \| package_messages ) $arg ;;`
485			`* ) echo "Usage: cvs.sh <target>"`
486			`echo "Target can be one of:"`
487			`echo " cvs cvs-clean dist"`
488			`echo " configure.in configure.files"`
489			`echo " package-merge package-messages"`
490			`echo ""`
491			`echo "Usage: anything but $1"`
492			`exit 1 ;;`
493			`esac`
494
495			`if test -f Makefile.am.in.wo; then`
496			`rm Makefile.am.in.wo`
497			`fi`
498
499			`exit 0`